Let a host marked for the relay actually be reached through it

The relay checkbox said it was not wired up, and the plan said the server
half was built and shipped. It was not: there was ADR 0004, the contract
records, RelayOptions and a CHECK constraint, and RelayOptions said in its
own remarks that there was no endpoint and no dialler. So both halves are
built here, as step 3 of docs/reaching-a-host-you-cannot-dial.md.

Server, in Features/Relay:

- POST /api/v1/relay/tickets makes every decision: the host, Connect on
  its vault, the relay switched on, and the stored name resolved once and
  judged by RelayAddressPolicy. Loopback, link-local, 0.0.0.0/8,
  multicast and the metadata endpoints are refused with no configuration
  escape, with IPv4-mapped and NAT64 spellings unwrapped first; then the
  operator's denials, allow-list and private-network switch. What passes
  goes into a Data Protection ticket, and nothing resolves the name again.
  Every target refusal is the same 403, so the endpoint cannot be used to
  map the operator's DNS; the real reason is logged.
- GET /api/v1/relay/connect takes the ticket as a second subprotocol,
  checks its expiry against TimeProvider and spends it with a unique
  insert into relay_ticket_use before accepting the upgrade. After the
  upgrade a refusal is a close code: 4502 for a host the server could not
  reach, 4429 for a limit, 4408 idle, 4409 lifetime, 1001 after a drain.
- relay_session is the audit row, written from short-lived scopes.

Client:

- RelayBridge is a loopback SOCKS5 listener that accepts once and pipes
  to the relay socket. It rides on the new SshLoopbackProxy.Lifetime, so
  the connection disposes it on every way a session ends and a failed
  connect disposes it before throwing.
- ServerRelay, exposed as IVaultServer.Relay from /api/v1/meta, asks for
  the ticket, opens the socket, starts the bridge and turns every refusal
  into a sentence.
- VaultViewModel and TransfersViewModel reach a relayed host through it,
  never fall back to dialling it directly, and replace SSH.NET's transport
  error with the relay's own reason when it gave one.

Neither side ever cancels a WebSocket operation. Cancelling one aborts
the socket, and an aborted socket sends no close frame, which is the only
way the client learns the server could not reach the host.
AnIdleSession_IsClosedWithTheIdleCode asserts that the code arrives.

Three departures from ADR 0004, recorded in it: awaited copy loops rather
than Pipelines (same backpressure, two 32 KiB buffers), no ?ticket=
fallback, and no device id in the ticket.

Tests: API 245, shell 582 (5 skipped), layout 170, SSH 110 including a
real login through the bridge, API client 30, contracts 25. Not run: the
Android build (its change is copy only) and the Alpine layout oracle.

tests/DodoSSH.Api.Tests/ApiFixture.cs

@@ -1,9 +1,11 @@
 using System.Net.Http.Headers;
 using System.Net.WebSockets;
+using DodoSSH.Api.Features.Relay;
 using DodoSSH.Contracts;
 using DodoSSH.Infrastructure;
 using Microsoft.AspNetCore.Hosting;
 using Microsoft.AspNetCore.Mvc.Testing;
+using Microsoft.AspNetCore.TestHost;
 using Microsoft.EntityFrameworkCore;
 using Microsoft.Extensions.Configuration;
 using Microsoft.Extensions.DependencyInjection;
@@ -70,7 +72,17 @@ public sealed class ApiFixture : WebApplicationFactory<Program>, IAsyncLifetime
             // The stub serves plaintext HTTP on a loopback port.
             ["DODOSSH_Oidc__RequireHttpsMetadata"] = "false",
 
-            ["DODOSSH_Relay__Enabled"] = "false",
+            // On, so the relay's endpoints can be tested at all. Nothing dials a real network: the seam
+            // below answers every resolve and connect, and the address policy still judges what it says.
+            ["DODOSSH_Relay__Enabled"] = "true",
+            ["DODOSSH_Relay__WebSocketUrl"] = "ws://localhost" + RelayProtocol.ConnectPath,
+
+            // Small, so a test can reach the cap with two sockets rather than ten.
+            ["DODOSSH_Relay__MaxConcurrentSessionsPerUser"] = "2",
+
+            // Short enough that a test can watch a session time out, long enough that no test which is
+            // moving bytes comes near it.
+            ["DODOSSH_Relay__IdleTimeout"] = "00:00:03",
 
             // Fixed so cursors stay valid for the lifetime of the test host.
             ["DODOSSH_Sync__CursorSigningKey"] = Convert.ToBase64String(new byte[32]),
@@ -80,8 +92,20 @@ public sealed class ApiFixture : WebApplicationFactory<Program>, IAsyncLifetime
         {
             Environment.SetEnvironmentVariable(name, value);
         }
+
+        builder.ConfigureTestServices(services => services.AddSingleton<IRelayNetwork>(RelayNetwork));
     }
 
+    /// <summary>
+    /// What the relay resolves and dials, in place of the machine's own resolver and sockets.
+    /// </summary>
+    /// <remarks>
+    /// Every address a test machine can reach by itself is loopback, which the relay refuses outright, so
+    /// a relay test needs a network that pretends. This one maps the addresses a test names onto loopback
+    /// listeners the test owns, and remembers what it was asked to dial.
+    /// </remarks>
+    internal FakeRelayNetwork RelayNetwork { get; } = new();
+
     /// <summary>Creates a client carrying a valid token for the given subject.</summary>
     /// <remarks>
     /// There is no verified-address knob here, and its absence is worth a sentence. It used to exist so