9 Commits

Include renames

Author	SHA1	Message	Date
jaap-jan	2ff9dff560	Terminal: deliver large pastes whole, keep keystrokes in order, and keep one session's failure off the shared socket ... - A message larger than the 64 KiB receive buffer was skipped and its tail dispatched as a frame of its own. Messages are now reassembled up to 16 MiB; one beyond that is dropped whole. - Input frames are handed to the pump without waiting, and ShellStream takes no lock around its write buffer, so a snippet's text and its carriage return could interleave or lose bytes. Writes are serialised per pump in arrival order. - A resize reaching a shell SSH.NET had already disposed threw out of the receive loop and closed the socket every tab shares. Each frame's failure now stays with its session.	2026-10-02 13:16:48 +02:00
jaap-jan	f05deb4fbc	Add port forwarding: local, remote and dynamic, per terminal session ... A host can now carry port forwards (-L, -R, -D), saved inside its encrypted payload as RelayTicketRequest.PortForwardId already assumed, so they sync and merge per forward like tags and pinned paths. The host schema moves to version 8 only for hosts that carry forwards. ISshConnection gains StartForwardAsync over SSH.NET's forwarded ports. Every listener binds loopback and there is no bind-address field: a forward is something any member of a shared keychain can edit. A remote forward's target is resolved here, IPv4 first, rather than by SSH.NET's constructor, which takes the first DNS answer and can send ::1. Forwards start with every terminal opened to the host and stop with its connection; a reconnect starts them again. The session sidebar lists them with state, failure reason and an on/off switch, the status bar counts the listening ones, and the host editor and detail pane gain a PORT FORWARDS section. A forward that cannot start fails alone. The phone does not start forwards yet: it has no surface showing what is listening, and its More screen now says so. No byte counts, since SSH.NET keeps none.	2026-09-28 20:47:02 +02:00
jaap-jan	9ead42171c	Stop a flooding remote growing the process, and let an ended session go ... The terminal's memory was bounded by an argument that is not true of the SSH library underneath it, and the whole of CreditWindow's remark was that argument: the pump stops reading when the renderer falls behind, SSH's own receive window closes, the remote sshd blocks on write, and the backpressure reaches the process producing the output. The middle step does not happen. Renci.SshNet's Channels.Channel.OnData calls its window adjustment before it raises DataReceived and re-opens the channel window as soon as it drops below one packet, and ShellStream's own handler copies the bytes into a System.Net.ArrayBuffer without blocking and without a ceiling — a buffer that doubles on demand and is not given back until the stream is disposed. So a reader that stopped reading slowed the remote down by nothing at all. It only chose whose buffer the flood landed in, and it chose the one nothing bounds. Measured against the container this repository already runs sshd in: a reader that reads nothing while `yes` runs leaves ShellStream holding 8.9 MB after one second, 26.8 MB after three and 44.3 MB after five, its capacity stepping 16 → 32 → 64 MB. That is the report of "a massive memory leak on Windows"; it is not a Windows fault, it is simply where long sessions with heavy output live. The fix is to read continuously, which is what keeps SSH.NET's buffer empty, and to put the bound where it can actually be enforced. OutputBacklog is that bound: a byte-capped queue of unsent output, 4 MiB by default, which drops its oldest bytes when full and counts what it discarded. Oldest rather than newest, because the tail of a flood is the prompt somebody is waiting for. The two bounds are now separate and each is enforced where it means something. The backlog bounds what is waiting to be sent. The credit window goes on bounding what has been sent and not yet drawn — the queue inside the WebView that nothing on this side can measure — and is reserved against in the flush loop rather than the read loop. Reading is part of neither, because reading was never what the remote was waiting on. Dropping is announced rather than silent. A terminal quietly showing a different transcript from the one the remote sent is worse than one that says it could not keep up, because the second can be believed. The line goes out under its own opcode, TerminalServerOpcode.OutputDropped, rather than spliced into the output stream: what this application says about the transcript is not part of the transcript, and keeping them apart is also what makes the arithmetic hold — every byte read is either in an Output payload or counted in BytesDropped. It opens with an SGR reset, because the cut lands at an arbitrary offset and whatever escape sequence the remote was in the middle of has been left half-said. Frames are now capped at 64 KiB and taken straight into the frame buffer. The cap is the large-object-heap threshold rather than a guess — a quarter-megabyte array allocated sixty times a second is collected only by a generation 2 pass — and the direct take removes an allocation and a copy of every byte the terminal shows. The second half is the one that made the first half's cost persist. Nothing gave a session back when the remote hung up: TerminalWorkspace kept the entry, and with it an undisposed ISshConnection — an authenticated socket, its cipher state, and a keep-alive putting a packet on the wire every thirty seconds — plus the pump and SSH.NET's read buffer at whatever size the session's busiest moment had grown it to, for as long as the tab stayed open. A tab somebody typed `exit` into an hour ago was indistinguishable from a live one in everything except what it drew. ReleaseAsync disposes both, from AnnounceEndedAsync and after the announcement: the tab is told first, because tearing down an SSH connection in front of that would be latency on the one thing the user is watching for. The dictionary entry stays, because LiveSessionCount, IsSessionLive and the tab's own ENDED and RECONNECT all read it. SendInputAsync therefore asks about liveness rather than presence, since the shell channel is gone the moment the remote is. Two faults introduced on the way here and fixed, both worth naming because neither would have been visible from the outside: The read loop left through a condition on its cancellation token, and RunAsync reads a read loop that returns as the remote having closed the channel. A tab the user closed would have reported itself as a shell that exited on its own. It throws instead. With the reader finished and a renderer that had stopped acknowledging, the flush loop span: output to send, no credit to send it with, and a wait for more output that returned at once because there was some. RunAsync never completed, so the tab was never told and the connection was never released — a session invisible and permanent. The loop now leaves for the drain as soon as the backlog is complete, and RunAsync resets the credit window alongside completing it so a flusher already parked on an acknowledgement that will never come is released. Four tests asserted the old contract and now assert its reverse, which is the point rather than a relaxation — WhenCreditRunsOut_ThePumpStopsReading is now WhenCreditRunsOut_ThePumpKeepsReadingAndTheBacklogHoldsTheLine, and has to prove both halves at once. The throughput harness gained a counting transport, because a consumer that copies every frame into a 32 MB list was the slowest thing in the pipeline and a harness whose consumer cannot keep up measures itself. The fake shell gained a pace, so "a renderer that keeps up loses nothing" can be asked of a producer a network could actually deliver rather than of one running at memory bandwidth. The test that would have caught this in the first place is ARunawayRemote_KeepsBeingReadAndStaysInsideTheBacklog, and it needs the real SSH.NET and the real sshd to say anything: a fake shell hands over bytes when it is asked, and a real channel hands them over when they arrive. Under the old code its BytesRead would have stopped at exactly WindowBytes. 121 terminal tests pass over three consecutive runs with no flakes, 105 against the container, and the app, session, layout and remaining suites are unchanged and green. Manual checks 1.10a and 1.10b cover the two symptoms a person can see: a working set that plateaus under `yes`, and a connection that goes when the shell does rather than when the tab does.	2026-09-04 17:16:23 +02:00
jaap-jan	e2733e5cbc	Notice when a shell ends, say which way it ended, and offer the way back ... A terminal whose machine rebooted stayed green for ever. Not "went stale and recovered late" — for ever: the tab claimed CONNECTED, the elapsed timer went on counting, and the only thing that ever corrected it was closing the application. That is the defect this fixes, and it turned out to be two separate failures wearing one symptom. ◆ THE HANG IS IN SSH.NET, AND KEEP-ALIVE ALONE WOULD NOT HAVE FIXED IT. ShellStream ends a blocked read from exactly two places: its channel being closed, and the session raising Disconnected. A shell that exits gives the first. But Session raises Disconnected from one method only — OnDisconnectReceived, for a server that politely says goodbye — and a socket that simply fails goes down a different path entirely: RaiseError fires the error event, sets the disconnecting flag and disposes the socket, without ever raising Disconnected. So the stream was never disposed, its Monitor.Wait was never pulsed, and the read blocked until the process ended. The transport was gone, the client knew the transport was gone, and nothing woke the one thread that was waiting. That is why the first attempt at a test for this sat at thirty seconds and failed. Both halves are needed and neither is sufficient: - Keep-alive makes the failure HAPPEN. An idle SSH session is a socket nobody writes to, and TCP has no way to discover that the far end has gone without writing to it — nothing was asked, so nothing could fail. Thirty seconds, matching OpenSSH's own ServerAliveInterval examples. It is the write that matters and not a reply: SSH_MSG_IGNORE need not be answered, so this is traffic rather than a heartbeat with a deadline, and there is no timeout invented here to be wrong about a slow link. - Disposing the stream from the error handler makes it ARRIVE. Queued to the thread pool and not done inline, which is not tidiness: this runs on SSH.NET's message-listener thread, and closing a channel waits for the server's close — processed by that same thread — so an inline dispose is the listener thread waiting on itself. SFTP gets the keep-alive too. Its operations are request/response and bounded by ConnectionInfo.Timeout already, so it needs no equivalent wake-up. ◆ exit AND reboot ARE TOLD APART BY A LATCH, BECAUSE THE OBVIOUS WAY IS A RACE. Wait for the read to end and then ask whether the transport is still up, and against a real server the answer is wrong about half the time: this was the only channel on the connection, so sshd hangs up a millisecond after closing it. By the time anything could ask, the transport is gone either way — and a poll would report every ordinary `exit` as a dropped connection. So ISshShellSession.TransportFailure is set at the moment SSH.NET raises the failure, which its own ordering puts strictly before the disconnect that wakes the read. A read that has just returned zero consults a settled value: set if the transport failed, still null if the remote merely closed the channel. The pump turns that into a TerminalSessionOutcome — RemoteClosed, ConnectionLost, ClosedLocally — carried on SessionEnded, which used to hand over a session id and nothing else. A subscriber cannot work this out afterwards; by the time it hears, there is no transport left to interrogate. Deliberately no fourth value for "the remote rebooted". Nothing on the wire distinguishes a reboot from a cable being pulled, and a name this client cannot check would be a guess dressed as a fact. ◆ WHAT IS DRAWN, AND WHY IT IS NOT DRAWN OVER THE PANE. The status bar says DISCONNECTED or SHELL EXITED where it used to say NOT CONNECTED for both — a word that is honest about a tab still dialling and useless about one whose shell has stopped. Red for the first and grey for the second: one is a machine that stopped answering and the other is work finished, and crying wolf on the ordinary end of every session is its own bug. The tab strip's dot gains the same fourth state, on both heads. Under the terminal, a strip carrying the reason and two buttons. It takes its own Auto grid row rather than overlaying the renderer, and that is forced rather than chosen: the WebView is a native child view composited above everything Avalonia draws, so the alternative is collapsing the terminal — and the scrollback is precisely what the user wants to read, because the last thing the remote said is usually why it went. terminal.js already writes the same sentence into the pane; this is the copy that does not scroll away. RECONNECT reuses the tab in place, which is what the word means to somebody who pressed it: the terminal they were working in comes back, where it was. It dials through the vault's ordinary connect path, so every refusal — a key that has left the keychain, an unknown host key, a group default that has changed since — is decided in the one place that already decides them; what this adds is which tab the attempt belongs to. The old session is closed as part of it, because a dead shell still holds an authenticated connection this process has stopped reading, and its pane still holds an xterm, a scrollback and a WebGL context, of which a browser hands out about sixteen. Two refusals it makes rather than pretending: a host reached by typing an address has no keychain entry to redial, and one that wants a password typed goes to the keychain with the sheet raised rather than being dialled with an empty box. Both say so on the strip where the button was pressed, not only in the vault's status on a screen that surface is not. TRY AGAIN appears on a refused connection for the same reason, and it is worth as much: the commonest refusal is a host that was not up yet. ◆ WHAT IS ACTUALLY VERIFIED. Two tests against a real sshd in a container. `exit` is reported as the remote closing the session — the one a polling implementation fails, and a fake shell cannot show it because a fake has no server behind it deciding to hang up. And a live shell losing its transport is reported as a lost connection, produced by dialling through a plain TCP relay the test owns and then cutting it; the container is shared by the collection, so killing sshd was never an option. The first draft of that second test used LoopbackProxyTests' SOCKS forward and timed out: disconnecting the carrier of a ForwardedPortDynamic does not close the loopback socket it accepted. Recorded in the test, because it is a property of SSH.NET's forwarder rather than of anything here, and it is not what a dying machine looks like. What no test reproduces is the waiting. A relay that closes sends a FIN, so the socket reports itself at once; a machine switched off sends nothing, and finding that out is the keep-alive's business and the OS's retransmit budget's — neither of which a test can hurry along without a clock this code does not own. A reboot is prompt in practice because the machine comes back and RSTs. Beside those: three pump outcomes, three workspace announcements, and seven shell-flow tests covering the drop, the clean exit, reuse of the tab, retry after a refusal, and both ways a reconnect can honestly come to nothing. Also fixed in passing: SshNetShellSession.IsOpen read ShellStream.CanRead, which is documented as always true — the stream stays readable after disposal so buffered output can be drained — so it had answered "yes" for every shell that ever existed. It reads CanWrite now. And MainWindowViewModel's session- ended handler moved from Dispatcher.UIThread.Post to the injected post delegate, which is what makes any of the shell half testable at all; the remark listing the three unreachable posts is one shorter.	2026-08-24 10:36:15 +02:00
jaap-jan	8a77b7ca68	Say how far a connection has got while it is still being made ... The connecting card set its status string once, when the tab was created, and never touched it again. Every connection therefore looked identical from the outside: one three seconds into a key exchange, one waiting out a fifteen-second timeout against a machine that is asleep, and one that had hung all drew the same "connecting…". The card now draws the five steps of getting there, each lit at the moment the handshake reports reaching it, over an amber track that fills as they finish. ◆ NOTHING ON THE LIST IS INVENTED. Every row changes state because a layer below it said so, at the instant the thing it names actually began. That is the whole reason it is worth showing, and it is why most of this commit is plumbing rather than XAML: there was no progress reporting anywhere in the stack to hook a step list onto, and a card animating plausible progress would have been indistinguishable from one that had stopped receiving any. SshConnectionPhase names four phases and deliberately not more. SSH.NET runs the entire handshake inside one ConnectAsync and raises exactly one event from the middle of it — HostKeyReceived, once the key exchange has produced a key to show — so that event is the only interior moment there is to report. Everything before it is Reaching and everything after it is Authenticating. A fifth phase in that assembly would have to be a timer, so there is not one. OpeningShell is reported by TerminalWorkspace instead, because that is where it happens: the factory's work ends with an authenticated connection, and asking for a pseudo-terminal on one is a separate round trip. The SFTP path passes null — a second connection opened behind an already-open shell has nobody watching a step list for it. The card's fifth step, "Starting the terminal", is the renderer wait and lives in the shell rather than in the SSH assembly, which has never heard of a renderer. On the first connection after a cold start it is a real wait with a real failure mode of its own — a missing WebView2 runtime — so a list that began at "reaching the host" would leave the one wait most likely to hang unnamed. Amber for the step in flight, and that follows the palette's rule rather than bending it. Green is what is true and purple is what you can press; a step still happening is neither, and it is exactly the caveat-worth-reading that amber exists for. Steps behind it go green as they become true. Nothing animates, which is the argument TransfersScreen.axaml already makes for its own track, reaching a screen with far more reason to want a spinner: a spinner is furniture invented to fill a state nobody measured, and these states are measured, so the track fills to what has finished and then waits there. A refusal keeps the step it stopped on, in red, with the ones behind it still green. That is the half a progress bar could not do, and it is the difference between "that host is not there" and "that host is there and would not have me" — a question the reason sentence alone frequently does not settle. The strip's dot goes amber while a tab is connecting, on both heads. It was grey, and so is a tab whose shell has exited: the two states in that strip with the least in common, one worth waiting for and one over. PhoneShell's own comment already recorded half of this — the dot stopped being green before anything had answered — and this is the other half. Progress is raised inline rather than through System.Progress<T>, which captures whatever synchronisation context it was constructed on and posts to it. That reads like a convenience and is really a second place the marshalling decision gets made: silently, differently under a test with no context, and out of order with respect to the failure that follows a phase. The shell marshals once, in one handler, through a new optional post parameter on MainWindowViewModel — the same seam TransfersViewModel already uses, and for the reason its own remark gives. The three Dispatcher.UIThread.Post calls that predate it are the ones this suite's comments record as out of reach; they are left alone rather than swept in here. Both heads draw the list. They differ in one place: Phone.axaml's mono class sets a colour and a size along with the family, so the caption rule names its own family instead of composing the two and asking two rules for one Foreground. The desktop's mono sets the family alone, which is why ConnectingCard does compose them. Each head also gains SHOW LOGS beside the button that gives up — the step list is this attempt and the log is every other one, which is what a connection taking too long actually raises. Seven tests, and the two that matter most run against the container rather than a fake: a real handshake reports its phases in order, and a host-key refusal never claims to have authenticated. A fake asserting what it was written to assert would have established nothing about either. The rest cover the tab advancing while the connection is gated, the step a refusal stops on, and a phase reported after the user has given up on the tab. 1,861 tests, none failing. The Android head's layout is not verified by anything. It compiles, and compiled bindings mean every new binding path resolves, but that project is not in DodoSSH.slnx, there is no test project for it and no device here — so unlike the desktop card, whose shapes the layout harness measures, these rows have not been drawn. Vertical fit is reasoned, not observed.	2026-08-10 15:47:45 +02:00
jaap-jan	4d1f07f253	Replay the live sessions to a renderer that just attached ... Each live session gets its credit window reset — the unacknowledged bytes died with the old page, and their acknowledgement is never coming — and its SessionOpened frame again, flagged as a replay so the page can tell a reattach from a genuinely new session. A session whose shell already ended gets nothing: its scrollback lived only in the page that is gone, and a frame implying otherwise would lie. RendererReattached is the seam for what the workspace has no business owning: the font size and the selected tab live in the shell, which re-pushes them from its own subscription.	2026-08-09 10:54:29 +02:00
jaap-jan	8209f15741	Let a session's transport say what it negotiated ... ISshConnection and ISftpSession both carry Cipher now — the server-to-client algorithm off SSH.NET's own ConnectionInfo, captured once because a rekey is not an event that library raises — and TerminalWorkspace.GetSessionFacts hands that plus the host key's algorithm back per session, without ever handing over the connection itself. Nothing reads either yet; the status bar that will is the next commit.	2026-08-08 20:54:14 +02:00
jaap-jan	5a899afd78	Decide what Lock does to a running shell, and say it ... Pressing Lock nulled and disposed the vault view model and touched nothing else. TerminalWorkspace is injected from App.axaml.cs and outlives every lock, so the SSH connection, the pty and the pump all kept running while the window said "Unlock your vault" — and since 0500e43 collapsed the WebView while locked, that live session was invisible as well as unstopped. CloseSessionAsync was reachable in production only from DisposeAsync, i.e. shutdown. None of this was written down anywhere, so it was neither a policy nor a bug, which is the actual problem. Shells now deliberately outlive the lock, and every layer says so. The reason to prefer this over making Lock a disconnect: locking is what a person does when they walk away from the machine, which is exactly when a long upgrade, build or transfer is most likely to be in flight. Ending every shell would make Lock a button that destroys work, and the predictable response is to stop pressing it and leave the vault open instead. The idle auto-lock this will grow decides it outright — an unattended timeout that killed a running job would be worse than the exposure it removes. Closing the channel also buys less than it looks: the session was authorised at connect time by a credential the remote verified itself, and no vault key participates in keeping it alive, so locking cannot retroactively un-authorise it any more than removing a member can. Stated honestly rather than implied, because the lock screen is what hides it: - The unlock screen shows how many shells are still connected, and that locking closes the vault and not the connections — so a machine still holding authenticated SSH channels does not present itself as merely "locked". Shown only when there is something to disclose. Quitting is what ends them, and the text admits that. - The Lock button carries the same thing in a tooltip, since its name implies the opposite of what it does to a shell. - README lists it as a third architecture consequence beside non-retroactive revocation, which is the same shape of honest limit; docs/crypto.md §10 records it as a threat-model boundary; TerminalWorkspace and LockAsync carry the argument next to the code. LiveSessionCount deliberately does not count dictionary entries. Nothing removes a session when the remote closes the channel by itself — RunSessionAsync only drops the renderer registration — so sessions.Count would report a shell that exited half an hour ago as still running, on the one screen where a user is deciding whether it is safe to walk away. A completed Run task is what "the shell is gone" actually looks like. While locked the number can only fall, since opening a session needs the vault, so a stale value over-reports rather than under-reports. Both new tests fail when the policy is reverted: the count test times out against sessions.Count, and the shell test reports "workspace.LiveSessionCount should be 1 but was 0" when Lock closes sessions. ShellFlowTests also stops building its workspace with a real SshNetConnectionFactory that nothing ever called, which had made the suite's independence from the network a coincidence rather than a property. Verified by hand with a live shell, which nothing had done: a harness mirroring MainWindow.axaml's 340,* grid with a real NativeWebView, the shipped WebAssets, a real sshd in a container, and an ISshShellSession decorator recording every window-change the remote is actually told about. Across lock and unlock, no window-change reached the remote at all, stty size answered 50 118 before and after, the renderer's own buffer came back byte for byte with the wrapped line intact, and the session stayed live throughout. A control run that never hides the WebView behaves identically, so nothing above is startup or idle behaviour. Keystrokes injected while locked reach nothing: twelve of twelve SendInput events accepted with the harness confirmed as the foreground window, no probe character in the remote's output, and a following Ctrl-U answered BEL, so nothing was queued in the line editor either. A hidden WS_CHILD window is not eligible for keyboard focus, which is what makes surviving the lock defensible rather than merely convenient. Correction to a claim made in f80b3d4: terminal.js's guard comment listed "a host that hides the WebView while the vault is locked" among the paths that reach a degenerate fit. It does not. Collapsing the control hides a native child window without resizing it, so the page still reports paneWidth 840 and paneHeight 760 with unchanged cols and rows, no ResizeObserver callback fires and the fit never runs. Establishing that rather than assuming it: the same cycle with MINIMUM_FITTABLE_PIXELS patched to 0 — the guard fully disabled — is equally clean. The guard is still right for minimising and for a splitter dragged to the edge; it is simply not what makes locking safe, and must not be cited as though it were. Recorded, not fixed: - Nothing closes one terminal from the interface, so a user reading "1 shell is still connected" can only act on it by quitting. CloseSessionAsync is tested and correct; VaultViewModel discards the session id it would need. - A session whose remote exits keeps its ISshConnection, and the thread ShellStream parks, until the process ends. - Suspected and seen once: before the harness waited for the window's scale to settle, a DPI settle pushed a 2202x1328 pane for a window 1180 logical units wide and a later re-push reflowed the wrapped line. Three later runs at RenderScaling 1.00 never showed it, so it is filed as a lead, not a finding. - WebView2 fails to initialise with CO_E_SERVER_EXEC_FAILURE when the host executable sits under a very long path. Cost an hour on the harness; relevant to packaging.	2026-07-29 14:44:02 +02:00
jaap-jan	eb354bcdd9	Add the SSH session layer and the terminal data plane ... The throughput harness the plan requires before any UI, plus the SSH plumbing under it. 94 new tests, no WebView involved. Credit-based flow control is what makes `yes` survivable. A terminal renders at 60 Hz at best while a remote produces output as fast as the network allows, and the difference has to accumulate somewhere or be refused. Credit is reserved *before* reading, never after: because the pump cannot read more than the renderer has room for, the coalescing buffer is bounded by the window rather than by how fast the remote can talk. When credit runs out the pump stops reading, SSH's own receive window closes, and the remote sshd blocks -- backpressure to the source with no custom protocol. Verified by falsification, not just by passing: with the credit gate removed three tests fail, including the throughput harness's bounded-memory assertion. Acknowledgements are clamped because they cross into JavaScript, where a buggy or hostile page could otherwise claim to have rendered a gigabyte and talk the host into an unbounded read. Host key trust is enforced by *failing* the connection rather than prompting inside the handshake. SSH.NET raises verification synchronously, so consulting the user there would block the handshake on a UI round trip and deadlock the first time the prompt needed the UI thread. Unknown host and changed key become distinct exceptions the caller resolves asynchronously. A mismatch has no retry path at all: a dialog offering to continue is how users are trained to click through the one warning that actually indicates interception. A legitimately rebuilt server is handled by removing the pin in settings, away from the moment of connecting. The data plane serves the renderer page from the same loopback listener as the socket, which makes Origin predictable -- always http://127.0.0.1:{port} -- where a WebView virtual-host mapping would give a different origin per backend and nothing to validate. The token is substituted at serve time, so it never touches disk and never appears in a URL. Being clear about what that buys: not protection from a process running as this user, which can read our memory anyway, but from a page in the user's browser attempting WebSocket connections to loopback ports, which is a real and routine thing. Two bugs the tests caught. The accept loop handled connections serially, so an upgraded WebSocket parked it inside the receive loop and every later request went unanswered -- the page's own script among them. The suite hung rather than failed, which is how I found it. And SHA-1 is unavoidable here: RFC 6455 mandates it for Sec-WebSocket-Accept, where it authenticates nothing. Suppressed narrowly with that reasoning; the alternative, HttpListener.AcceptWebSocketAsync, throws PlatformNotSupportedException off Windows.	2026-07-28 21:58:55 +02:00