10f80bded1b7d9204f41a6bf98ffdd21ecf86ea9
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jaap-jan
|
8a77b7ca68 |
Say how far a connection has got while it is still being made
The connecting card set its status string once, when the tab was created, and never touched it again. Every connection therefore looked identical from the outside: one three seconds into a key exchange, one waiting out a fifteen-second timeout against a machine that is asleep, and one that had hung all drew the same "connecting…". The card now draws the five steps of getting there, each lit at the moment the handshake reports reaching it, over an amber track that fills as they finish. ◆ NOTHING ON THE LIST IS INVENTED. Every row changes state because a layer below it said so, at the instant the thing it names actually began. That is the whole reason it is worth showing, and it is why most of this commit is plumbing rather than XAML: there was no progress reporting anywhere in the stack to hook a step list onto, and a card animating plausible progress would have been indistinguishable from one that had stopped receiving any. SshConnectionPhase names four phases and deliberately not more. SSH.NET runs the entire handshake inside one ConnectAsync and raises exactly one event from the middle of it — HostKeyReceived, once the key exchange has produced a key to show — so that event is the only interior moment there is to report. Everything before it is Reaching and everything after it is Authenticating. A fifth phase in that assembly would have to be a timer, so there is not one. OpeningShell is reported by TerminalWorkspace instead, because that is where it happens: the factory's work ends with an authenticated connection, and asking for a pseudo-terminal on one is a separate round trip. The SFTP path passes null — a second connection opened behind an already-open shell has nobody watching a step list for it. The card's fifth step, "Starting the terminal", is the renderer wait and lives in the shell rather than in the SSH assembly, which has never heard of a renderer. On the first connection after a cold start it is a real wait with a real failure mode of its own — a missing WebView2 runtime — so a list that began at "reaching the host" would leave the one wait most likely to hang unnamed. Amber for the step in flight, and that follows the palette's rule rather than bending it. Green is what is true and purple is what you can press; a step still happening is neither, and it is exactly the caveat-worth-reading that amber exists for. Steps behind it go green as they become true. Nothing animates, which is the argument TransfersScreen.axaml already makes for its own track, reaching a screen with far more reason to want a spinner: a spinner is furniture invented to fill a state nobody measured, and these states are measured, so the track fills to what has finished and then waits there. A refusal keeps the step it stopped on, in red, with the ones behind it still green. That is the half a progress bar could not do, and it is the difference between "that host is not there" and "that host is there and would not have me" — a question the reason sentence alone frequently does not settle. The strip's dot goes amber while a tab is connecting, on both heads. It was grey, and so is a tab whose shell has exited: the two states in that strip with the least in common, one worth waiting for and one over. PhoneShell's own comment already recorded half of this — the dot stopped being green before anything had answered — and this is the other half. Progress is raised inline rather than through System.Progress<T>, which captures whatever synchronisation context it was constructed on and posts to it. That reads like a convenience and is really a second place the marshalling decision gets made: silently, differently under a test with no context, and out of order with respect to the failure that follows a phase. The shell marshals once, in one handler, through a new optional post parameter on MainWindowViewModel — the same seam TransfersViewModel already uses, and for the reason its own remark gives. The three Dispatcher.UIThread.Post calls that predate it are the ones this suite's comments record as out of reach; they are left alone rather than swept in here. Both heads draw the list. They differ in one place: Phone.axaml's mono class sets a colour and a size along with the family, so the caption rule names its own family instead of composing the two and asking two rules for one Foreground. The desktop's mono sets the family alone, which is why ConnectingCard does compose them. Each head also gains SHOW LOGS beside the button that gives up — the step list is this attempt and the log is every other one, which is what a connection taking too long actually raises. Seven tests, and the two that matter most run against the container rather than a fake: a real handshake reports its phases in order, and a host-key refusal never claims to have authenticated. A fake asserting what it was written to assert would have established nothing about either. The rest cover the tab advancing while the connection is gated, the step a refusal stops on, and a phase reported after the user has given up on the tab. 1,861 tests, none failing. The Android head's layout is not verified by anything. It compiles, and compiled bindings mean every new binding path resolves, but that project is not in DodoSSH.slnx, there is no test project for it and no device here — so unlike the desktop card, whose shapes the layout harness measures, these rows have not been drawn. Vertical fit is reasoned, not observed. |
||
|
jaap-jan
|
9d5ff9f23a |
Draw what authenticated, and over what, on the session status bar
The v5b design's own row: the negotiated cipher, then the host key's algorithm and the name of the key or credential that authenticated, as one mono run beside CONNECTED — on both surfaces, off MainWindowViewModel's surface-aware SessionCipher and SessionIdentityText, the same shape SessionAddress set. The identity's name comes out of TryBuildAuthentication, the one resolution point that always had it in scope and always threw it away; it rides HostAuthentication to the tab and to the SFTP connect alike. Three deviations, recorded in the gaps doc: the algorithm prints as negotiated rather than shortened, the run is plain text because no pin-details modal exists for an open session, and a typed password shows the algorithm alone — there is no item behind the dot. A dead terminal tab keeps its facts for the scrollback still on screen; an SFTP disconnect, with no scrollback, clears them. |
||
|
jaap-jan
|
43c939b697 | Give the window its v5b chrome and each session surface its own shell | ||
|
jaap-jan
|
4300d917a8 |
Stop making people wait for a handshake, and give the host list a pointer
Connecting held the vault's busy gate, which meant a window that did nothing visible for as long as a machine took to answer — and against one that is merely asleep, that is the whole timeout. The gate is gone from that one command. A tab now appears in the strip in the same turn as the click, carrying "connecting…" rather than a pane, and the terminal's rectangle draws a card naming the host and the address being dialled. Every other screen stays usable, and two connections can be in flight at once. That splits the vault's one connection event into three, carrying an attempt id, because "which tab is this about" can no longer be answered by "the most recent one". The id also buys the two kinds of not-connecting their different endings: a refusal stays in the strip as a tab holding its reason, since by then the user is quite likely three screens away and a status line they are not looking at is not where a failure should end; a host key question takes the tab away and puts the window back on HOSTS, because the prompt is drawn there and a tab claiming failure would be competing with the thing about to resume it. ConnectAsync takes no CancellationToken any more, and that is load-bearing rather than tidying. A [RelayCommand] over a method that takes one generates a command that cancels the previous execution's token on every invocation — so asking for a second machine silently abandoned the first, measured as the first tab disappearing with "Cancelled." the instant the second was asked for. Giving up on a connection is closing its tab, and a session that lands after that is adopted rather than dropped: a shell running with nothing naming it cannot be closed at all. A tab is marked active on IsShowing rather than IsSelected. The selection survives navigating away — that is what makes the strip a way back to a terminal instead of a way to lose one — so a tab lit while preferences filled the window was a second "you are here" mark pointing at something nobody could see. The nav rail's own entries have always made this distinction. The host list grows the two gestures it looked like it already had. A right click selects the row under the pointer before opening a menu of Connect, Edit and Delete — the menu is on the list rather than in the item template, so its entries are the vault's own commands and not a row's, and it is cancelled outright over a group heading. Dragging a host onto a heading files it there, onto a host files it beside that one, and onto UNGROUPED takes it out of a group; the write is one field of one host through the same repository a save uses, refused while the editor is open because a drop is a gesture on the list and not on a half-typed form. Clicking a result in the palette connects, which is what a list of hosts under a search box looks like it does. It went through the shell's own command, so the pointer and Enter take one path. And the files screen's two pickers followed the vault's lists once, at unlock: a host or a bucket created afterwards could not be picked until the keychain had been locked and opened again, with nothing on screen explaining why the machine plainly in the host list was missing. They follow the collections now, re-finding the selection by id across the rebuild a sync pass causes every minute. 165 shell tests and 69 layout tests green, including the connecting tab, both failure endings, two connections at once, a connection in flight across a lock, and the right click acting on the row under the pointer rather than on the selection. The drag itself is in docs/manual-checks.md with the rest of phase 7 — headless Avalonia has no platform drag, and a test that claimed to have dropped something would pass while confirming nothing. |
||
|
jaap-jan
|
fe9d7fc289 |
Give DodoSSH a phone, and a shared shell for both heads to drive
The Android head from docs/android-port.md, taken as far as its step 6. Step 3, the spike, is answered and its throwaway screen is gone: libsodium.so and libe_sqlite3.so are both in the arm64 APK, so NSec resolves its native half on Android despite shipping no Android build, and the local cache opens. Two findings the audit could not have had: Avalonia.Controls.WebView only ships net10.0-android36.0, which settles the open "which Android versions" question at targetSdk 36; and Android has blocked cleartext HTTP since API 28, so the terminal renderer needs a network security config scoped to 127.0.0.1 or the WebView loads nothing. DodoSSH.Client.Shell is new and is why the phone can exist: the view models, the terminal renderer files and the palette moved there so both heads drive one state machine and draw from one set of tokens. The desktop head is otherwise untouched and its 144 tests still pass. The platform pieces behind interfaces that already existed: the profile directory from filesDir, a device key wrapped by a StrongBox-backed key that a fingerprint releases, and a foreground service so a shell outliving a vault lock stays true on a platform that stops backgrounded processes. Sign-in is deliberately absent rather than approximated. It needs an app link, because reusing the desktop loopback listener is the attack RFC 8252 section 8.3 names. |