13 Commits

Include renames

Author	SHA1	Message	Date
jaap-jan	70b3290a77	Bind an SSH key to a host instead of picking one per connection ... A host now names the key it authenticates with, or none, as a field in its encrypted payload — so the choice follows the host to every machine rather than being made again each time somebody connects. The per-connection "Use key" switch it replaces was a stopgap for not having this, and keeping both would have left two mechanisms answering one question. This is the first payload schema version bump, and it does not work the obvious way. A host is written at the *lowest* schema version that can represent it: one that binds a key is written at 2, one that does not is still written at 1, byte for byte as it was before the field existed. The version is what makes an older client refuse to edit an item, so stamping 2 unconditionally would mean upgrading a single machine and renaming a single host made that host uneditable on every machine that had not upgraded yet. Confining the cost to the hosts that actually use the field is the difference between a team noticing a bump and a team being blocked by one. HostSecretCodec states the rule so the next field added follows it, and a test pins the version-1 bytes against a literal rather than against the codec, because the claim is about history: every host already in every vault has to re-encode to what it encoded before, or the first sync after an upgrade would push the whole vault as changed. A binding is an item id, not a copy of the key — a second copy of a private key is one that goes stale — which means the reference can dangle when the key is deleted on another machine. Both places that meets are handled the same way, by refusing rather than falling back: - Connecting to a host whose key is gone is refused outright. A host somebody deliberately set up for key-only access must not quietly start offering a password. - Opening such a host in the editor keeps the binding, selected, labelled as missing. The quieter version of the same failure is someone editing the port and saving, silently converting the host to password authentication with nothing ever having said so. Two things this found by being falsified: - The merge was untested for the new field, and "just take the server's value" passed the entire suite — a local binding change would have been discarded with no conflict recorded. HostSecretMergeTests already had a test written for exactly this class of omission; it simply had not been extended. - Adding a nullable field exposed a defect in HostSecretMerge.Field: it short-circuited when the discarded value was null, so the formatter never ran for the one case where null is a value rather than an absence, and a field whose absence has a name could not report it. Now the formatter always runs, and "no key" appears in the conflict log where an empty string used to. Also fixes eight nullable warnings in SyncEndpointTests left by the server-side SSH key commit, which had omitted the null-forgiving operator the rest of that file uses. They were invisible until an unrelated change forced the project to recompile. The end-to-end slice now binds its host to its key, so a schema-version-2 payload goes through the real API, the real PostgreSQL and back out on a second machine. 745 tests green. Zero warnings, dotnet format clean.	2026-07-29 20:42:51 +02:00
jaap-jan	e3fd3e1728	Sync and authenticate with SSH keys on the client ... Completes the client half of SSH keys: they sync alongside hosts, appear in their own list, and can be selected to authenticate a connection instead of typing a password. The reconciler and the repository were Host-typed throughout, so the choice was to generalise them or to keep a second copy per item type. Generalised, because ItemReconciler's whole premise is that the pull and the push paths must answer the same collision the same way — two copies would drift the first time one of them was fixed. What is genuinely per-type now arrives through IItemKind<TSecret>: the cipher, the merge, the plaintext columns, and the noun to use when telling a person what happened to their item. Generic where the server's IItemKind is not, and for the reason that reverses there — the client needs the concrete type, because it merges field by field. The pull filter is derived from the same registry that builds the reconcilers. That is the specific failure being designed out: an item type that encrypts, merges and lists perfectly and is never once requested from the server, so it works on the machine that made it and exists nowhere else. No client cache migration. The item table's primary key and the outbox's unique index already carry the entity type, and AadResourceTypes already mapped SshKey — so a host and a key may share an id and never see each other's rows, which SshKeySyncTests now arranges deliberately. A key hands the server nothing in plaintext. There is a public_key_fingerprint column and it would be accepted; leaving it null is deliberate. A fingerprint is not secret but it is a stable identifier for a key pair, so filling it would let an operator tell which of their users hold the same key and correlate one across vaults, for a column nothing reads. The design allows itself one plaintext concession — the relay address, which the relay cannot work without — and this is not that. A key is chosen per connection rather than bound to a host, which works the way ssh -i does. Binding one needs a field on HostSecret and therefore a payload schema bump, which makes every host written afterwards read-only on an older build; worth doing deliberately rather than as a side effect of adding keys. Three things this found, all of them by being falsified rather than by review: - Making the reconciler generic silently turned a record comparison into reference equality, because == on a type parameter is not value equality. The effect would have been a conflict recorded on every pass for an unacknowledged create that had in fact landed. Sabotaging the fix left all 73 tests passing — nothing covered that branch — so ConflictMatrixTests now has AnUnacknowledgedCreateThatDidLand_IsDroppedQuietly, which fails without it. - A test asserting that a blank passphrase reaches SSH.NET as null was vacuous: it exercised the editor, not the credential path, and passed with the guard deleted. Resolved by making SshKeySecret.Passphrase normalise an empty string to null, so there is one spelling of one state — which also keeps two clients from producing different payload bytes for an identical key. That exposed a wider gap: SshKeySecret, its codec and its merge had no direct unit tests at all. They have 25 now. - The reason first given for that normalisation was false. It claimed SSH.NET rejects a passphrase supplied for an unprotected key; measured against a real sshd it ignores it and authenticates anyway. Corrected everywhere it was stated and recorded in docs/platform-flags.md. The same test file also closes a real hole: SshPrivateKeyCredential had never been exercised against a server, because the existing key test builds SSH.NET's auth method directly and bypasses the path a vault-held key actually takes. Only one editor may be open at a time. Both sit in the same 340-pixel column as Auto rows and their heights together exceed it at the window's minimum size, so two open editors put the lower one's Save and Cancel past the bottom edge — the same failure this window already shipped once with the setup screens. Expressed as a state rule because that is the only form of it this repository can check: nothing here loads a .axaml. The refusal keeps what was typed, since in the key editor that is a pasted private key the user may have nowhere else. The end-to-end slice now carries a key as well as a host, so both item types go through the real API, the real PostgreSQL and the real crypto in one pass — the three hand-kept mappings between enums that do not line up are the reason that is worth doing rather than trusting the unit suites. 735 tests green, including the container-backed SSH and end-to-end suites. Zero warnings, dotnet format clean.	2026-07-29 20:27:23 +02:00
jaap-jan	586cb303d5	Merge branch 'claude/gallant-brahmagupta-1f8244' ... Writes down that locking the vault leaves shells running, and shows the count on the unlock screen rather than leaving it to be inferred. Conflict resolution: - ShellFlowTests' fixture keeps main's FakeSshConnectionFactory. The branch added an IdleSshConnectionFactory for exactly what main's fake already does — a shell that is open, silent and never closes on its own — so FakeSshConnections.cs is dropped rather than merged, leaving one fake SSH stack in the suite instead of two that would drift apart. - MainWindowViewModel and TerminalWorkspace: both sides added their own members, so both are kept. - TerminalWorkspaceTests was added by both branches, with the renderer gate on one side and session lifetime on the other. Merged into one class over one set of helpers; the gate tests now use FakeConnectionFactory rather than an NSubstitute stub, since the suite already has the fake. gallant's polling Timeout constant is PollTimeout, which no longer reads as the renderer's. - platform-flags.md keeps main's measured focus section and drops the short "nothing hands the terminal keyboard focus" entry the branch still carried, which that section supersedes. One genuine disagreement between the branches, left visible rather than flattened: this branch measured that a collapsed WebView cannot be typed into and attributed it to a hidden WS_CHILD window being ineligible for keyboard focus, while main's focus work measured Win32 focus still held by that hidden window and added a lock path that moves the keyboard off it. Both results stand; the mechanism sentence now defers to the focus entry, which makes the input barrier something the lock path maintains rather than something the platform guarantees. Full suite green, including the container-backed SSH tests.	2026-07-29 15:46:41 +02:00
jaap-jan	74341d41e0	Merge branch 'claude/distracted-ritchie-53fc70' ... Bounds the renderer wait, so a WebView2 that never initialises reports itself instead of hanging Connect with the busy flag stuck. Conflict resolution, all of it in the App test suite, which main had changed under the branch when sleepy-chebyshev landed: - The workspace fixture keeps main's fake SSH factory and its FakeRenderer-aware page, and takes the branch's RendererTimeout on top. One second rather than the branch's 250 ms, because the timeout now also bounds FakeRenderer's own wait for the attach it just made. - FakeRenderer arrived on main after the branch was cut and still called the no-argument WaitForRendererAsync. Both sides merged cleanly and left the build broken; it now passes its own token. - ConnectingWithNoRenderer's remark claimed the suite never starts the workspace and never attaches a renderer. Both are false here, so it now says what is true of the test: it is the one connect test that attaches no renderer.	2026-07-29 15:40:25 +02:00
jaap-jan	9270d0cba5	Merge branch 'claude/sleepy-chebyshev-cda68d'	2026-07-29 15:35:02 +02:00
jaap-jan	d459dac600	Stop a dead WebView2 hanging Connect with the busy flag stuck ... VaultViewModel.ConnectAsync awaited TerminalWorkspace.WaitForRendererAsync with no timeout and no token, and RunAsync clears IsBusy only after the work returns. Whether the renderer attaches at all depends on a runtime this application does not install: with a missing or policy-blocked Evergreen runtime, or an AppContainer that cannot reach loopback, the socket never arrives — so Connect never returned, the window stayed disabled on "Connecting…" for the rest of the session, and nothing on screen said why. Left out of 0500e43 to keep that change focused, and recorded in docs/platform-flags.md as worth fixing on its own merits. The gate itself is unchanged and has to stay: TerminalDataPlane.SendAsync drops frames when no renderer is attached rather than queueing them, so a session opened before the renderer arrives loses its SessionOpened frame and then streams output at a terminal that was never created. Only the wait changed — RendererAttached.WaitAsync(timeout, cancellationToken), with the command's own token threaded through. Fifteen seconds, on TerminalWorkspaceOptions.RendererTimeout. Attaching is normally near-instant, since WebView2 starts with the window and the page has usually attached while the passphrase was still being typed, but a first run on a cold profile creates a user-data directory and starts a process tree of some thirty-five processes first, which on a loaded machine is seconds rather than milliseconds. A renderer that will never attach will not attach however long the wait is, so being generous costs only how long a broken runtime takes to say so, while being tight costs telling someone their runtime is broken when it was merely slow. Injectable because both new tests would otherwise sit out that budget. The timeout is caught in VaultViewModel rather than left to RunAsync's generic handler, because TimeoutException.Message is "The operation has timed out" — which sends someone looking at their network or their host. The status now names the WebView2 runtime and says to install it. TerminalWorkspaceTests covers the half that was missing: the wait gives up (329 ms against a 250 ms budget) and obeys its token (2 ms against a five-minute one). Before the bound, the first of those would have hung rather than failed. ShellFlowTests never starts its workspace, which from the view model's side is indistinguishable from a WebView2 that failed to initialise, so it asserts that the status names WebView2 and that IsBusy is cleared; changing the catch to another exception type makes it fail with "The operation has timed out.", so neither assertion is vacuous. The success path is untouched and still covered end to end by TerminalEndToEndTests against a real sshd container, which now passes the test's cancellation token. One byproduct: the doc comment on WaitForRendererAsync carried two double-encoded em dashes, fixed now that the block is rewritten.	2026-07-29 15:26:53 +02:00
jaap-jan	c6fc19bbbd	Sync the vault automatically instead of only on a button press ... Three triggers: once when the vault opens, straight after any local change, and every minute while it stays open. The Sync button stays, because someone just handed a credential wants to know now rather than within the minute, but nothing depends on it being pressed any more. A background pass is deliberately not the button's code path. Routing it through RunAsync would raise the busy flag every minute — disabling Connect and Save for the duration — and repaint the status line over whatever the user was reading. So it is quiet: the status changes only when a pass actually moved an item or produced something needing attention, and a pass is skipped outright while a command is running rather than queueing behind it. Both guards are covered; removing either fails a test. A shared semaphore serialises every pass, taken with a zero timeout rather than awaited — a pass arriving while another runs has nothing to add by waiting, and queueing them would turn a slow server into a backlog of identical work. Failures are swallowed, which is right in exactly this one place: a laptop closed all afternoon would otherwise replace the status line with a socket error once a minute. It is quiet rather than hidden — the account bar already shows when there is no connection, and pressing Sync reports the real reason. What earns that is the outbox: a test proves a change left queued by a failed pass is still sent by the next sync, so quiet never means lost. Two existing tests asserted the opposite behaviour — that a save queued and pushed nothing until Sync was pressed — and were rewritten rather than deleted; the local-first guarantee they were really protecting is that the list updates with no server, which the offline test still covers. Two things the tests caught in my own work. ReloadAsync had to be split out of LoadAsync because rebuilding the list repainted the status line unconditionally, which made "the background pass is quiet" false on the one path that mattered. And the yields-to-a-command test was vacuous as first written: saving pushes, so there was no pending change left and the assertion held with the guard deleted. It now fails the automatic push first to arrange a real queue.	2026-07-29 14:53:19 +02:00
jaap-jan	5a899afd78	Decide what Lock does to a running shell, and say it ... Pressing Lock nulled and disposed the vault view model and touched nothing else. TerminalWorkspace is injected from App.axaml.cs and outlives every lock, so the SSH connection, the pty and the pump all kept running while the window said "Unlock your vault" — and since 0500e43 collapsed the WebView while locked, that live session was invisible as well as unstopped. CloseSessionAsync was reachable in production only from DisposeAsync, i.e. shutdown. None of this was written down anywhere, so it was neither a policy nor a bug, which is the actual problem. Shells now deliberately outlive the lock, and every layer says so. The reason to prefer this over making Lock a disconnect: locking is what a person does when they walk away from the machine, which is exactly when a long upgrade, build or transfer is most likely to be in flight. Ending every shell would make Lock a button that destroys work, and the predictable response is to stop pressing it and leave the vault open instead. The idle auto-lock this will grow decides it outright — an unattended timeout that killed a running job would be worse than the exposure it removes. Closing the channel also buys less than it looks: the session was authorised at connect time by a credential the remote verified itself, and no vault key participates in keeping it alive, so locking cannot retroactively un-authorise it any more than removing a member can. Stated honestly rather than implied, because the lock screen is what hides it: - The unlock screen shows how many shells are still connected, and that locking closes the vault and not the connections — so a machine still holding authenticated SSH channels does not present itself as merely "locked". Shown only when there is something to disclose. Quitting is what ends them, and the text admits that. - The Lock button carries the same thing in a tooltip, since its name implies the opposite of what it does to a shell. - README lists it as a third architecture consequence beside non-retroactive revocation, which is the same shape of honest limit; docs/crypto.md §10 records it as a threat-model boundary; TerminalWorkspace and LockAsync carry the argument next to the code. LiveSessionCount deliberately does not count dictionary entries. Nothing removes a session when the remote closes the channel by itself — RunSessionAsync only drops the renderer registration — so sessions.Count would report a shell that exited half an hour ago as still running, on the one screen where a user is deciding whether it is safe to walk away. A completed Run task is what "the shell is gone" actually looks like. While locked the number can only fall, since opening a session needs the vault, so a stale value over-reports rather than under-reports. Both new tests fail when the policy is reverted: the count test times out against sessions.Count, and the shell test reports "workspace.LiveSessionCount should be 1 but was 0" when Lock closes sessions. ShellFlowTests also stops building its workspace with a real SshNetConnectionFactory that nothing ever called, which had made the suite's independence from the network a coincidence rather than a property. Verified by hand with a live shell, which nothing had done: a harness mirroring MainWindow.axaml's 340,* grid with a real NativeWebView, the shipped WebAssets, a real sshd in a container, and an ISshShellSession decorator recording every window-change the remote is actually told about. Across lock and unlock, no window-change reached the remote at all, stty size answered 50 118 before and after, the renderer's own buffer came back byte for byte with the wrapped line intact, and the session stayed live throughout. A control run that never hides the WebView behaves identically, so nothing above is startup or idle behaviour. Keystrokes injected while locked reach nothing: twelve of twelve SendInput events accepted with the harness confirmed as the foreground window, no probe character in the remote's output, and a following Ctrl-U answered BEL, so nothing was queued in the line editor either. A hidden WS_CHILD window is not eligible for keyboard focus, which is what makes surviving the lock defensible rather than merely convenient. Correction to a claim made in f80b3d4: terminal.js's guard comment listed "a host that hides the WebView while the vault is locked" among the paths that reach a degenerate fit. It does not. Collapsing the control hides a native child window without resizing it, so the page still reports paneWidth 840 and paneHeight 760 with unchanged cols and rows, no ResizeObserver callback fires and the fit never runs. Establishing that rather than assuming it: the same cycle with MINIMUM_FITTABLE_PIXELS patched to 0 — the guard fully disabled — is equally clean. The guard is still right for minimising and for a splitter dragged to the edge; it is simply not what makes locking safe, and must not be cited as though it were. Recorded, not fixed: - Nothing closes one terminal from the interface, so a user reading "1 shell is still connected" can only act on it by quitting. CloseSessionAsync is tested and correct; VaultViewModel discards the session id it would need. - A session whose remote exits keeps its ISshConnection, and the thread ShellStream parks, until the process ends. - Suspected and seen once: before the harness waited for the window's scale to settle, a DPI settle pushed a 2202x1328 pane for a window 1180 logical units wide and a later re-push reflowed the wrapped line. Three later runs at RenderScaling 1.00 never showed it, so it is filed as a lead, not a finding. - WebView2 fails to initialise with CO_E_SERVER_EXEC_FAILURE when the host executable sits under a very long path. Cost an hour on the harness; relevant to packaging.	2026-07-29 14:44:02 +02:00
jaap-jan	dbddbcd711	Hand the terminal the keyboard on connect, and take it back on lock ... After a successful connect the first keystrokes went to the shell's UI rather than the remote shell. The page's own term.focus() focuses the textarea inside the document, which does nothing while the window's keyboard focus is still on the Connect button, so the terminal had to be clicked before it would accept anything. The obvious guess about the fix — that reaching a native child window needs SetFocus through P/Invoke — is backwards, and measuring it first is what kept this small. NativeWebView overrides Focusable to true and its OnGotFocus calls the adapter's Focus(), which on Windows is ICoreWebView2Controller::MoveFocus(PROGRAMMATIC). So a plain Avalonia Terminal.Focus() really does move Win32 focus into WebView2. Measured in a standalone harness with no DodoSSH code, on the same 340,* grid as the shell, reporting GetFocus() and the page's own document.hasFocus() at each step: focus lands on the Chrome_WidgetWin_1 child and the page reports hasFocus: true. It is the return trip the package does not implement. OnLostFocus calls the adapter's ResignFocus(), and on Windows that method body is empty, so Avalonia's focus and Win32's diverge: after textBox.Focus() the focused element is the text box while the keyboard is still on WebView2 — a caret that silently receives nothing. Window.Activate() and Window.Focus() were both measured and neither recovers it, so the hand-back is a SetFocus on the top-level, in Views/NativeKeyboardFocus.cs. A real mouse click does recover it, because Avalonia's window sets focus on pointer input, which is why this is invisible to anyone who clicks before typing. That turned up a worse defect than the one being fixed, and it shipped in 0500e43. Collapsing the WebView does not release the keyboard: focus stays on the hidden holder — measured held by a window reporting visible=False — while Avalonia's focused element becomes (none). So a user who had clicked the terminal and then pressed Lock got an unlock screen that swallowed the passphrase. Locking now hands the keyboard back and focuses that box. Ctrl+Shift+F6 is the way out for someone using only a keyboard. It has to be handled in terminal.js and posted to the host as a web message, because once the child window owns Win32 focus Avalonia receives no key events and no KeyBinding could fire; the package also subscribes MoveFocusRequested and discards it, so there is no Tab-out to lean on. Not Escape, which vim alone rules out, and not a bare F6, which TUIs bind — Ctrl+Shift is the range terminal emulators conventionally keep for themselves and never forward to the remote. Verified rather than assumed: the posted string arrives verbatim in Body, and the chord reaches the page as F6 with both modifiers. Order matters and is now recorded. Focus() on a collapsed control is a measured no-op and is not replayed when it is revealed, so focus survives a lock/unlock cycle only because a session can be opened solely from an unlocked vault, which is what reveals the control in the first place. The view models still reference no view. VaultViewModel raises SessionOpened on the success path only, the shell forwards it as TerminalSessionOpened through the generated OnVaultChanged hook so unlock, lock and dispose all attach and detach in one place, and the view holds the whole focus policy. An event rather than a bound flag because connecting a second host while one is open has to move focus again, and no state change describes that. Three tests, and what they do not cover is the point. They cover the plumbing: focus is asked for once per session, a failed connect does not ask at all — a host-key prompt needs the keyboard on its own buttons — and locking stops the forwarding. They cannot cover the focus call, because headless Avalonia has no native window, so a headless test would focus correctly and confirm the wrong belief; that is measured in the harness and written down in docs instead. Dropping the forwarding fails two of them and dropping the detach fails one; deleting the raise outright does not compile, since the event would be unused. Reaching the connect path at all needed two new fakes. FakeRenderer attaches the way the real page does — fetch the served page, read back the token and socket URL the host substituted into it, then open the socket with both subprotocols — rather than being handed the token, so the part of the handshake that has been got wrong before stays under test. FakeSsh replaces a factory that would need a reachable sshd, which DodoSSH.Client.Ssh.Tests already covers against a container. The suite also never called workspace.Start(), so nothing served the page and no renderer could have attached. DllImport rather than the source-generated LibraryImport, which requires AllowUnsafeBlocks for the whole project. The signature is blittable so there is no marshalling stub to improve on, and turning unsafe code on across a client that handles key material to gain nothing is a poor trade. Correcting an earlier entry: docs/platform-flags.md described this as a focus-plumbing gap and offered "click inside the terminal first" as the workaround. Both true, and both stop short of the half that matters — focus crosses into the WebView readily and never comes back on its own, which is the same mechanism as the text boxes that mysteriously stopped accepting keystrokes in the airspace entry above it, not a separate fault.	2026-07-29 14:31:09 +02:00
jaap-jan	f80b3d4351	Harden the WebView collapse, and replace its evidence with a measurement ... An adversarial review of 0500e43 did not refute the fix but closed the gap I had left open and found three hazards around it. A standalone spike — a 60-line Avalonia app with no DodoSSH code — reproduces the airspace bug on a 340,* grid, and a second harness mirroring the data plane's handshake measures what I had only reasoned about: with IsVisible=false set before the window is ever shown, the adapter is created, the page is fetched and the WebSocket 101 is sent, with frames arriving over the socket while hidden. A cold WebView2 profile behaves the same. Revealing recomputes bounds in about 7 ms. So the docs no longer cite "35 msedgewebview2 processes" as the confirmation that the renderer attaches. A process count cannot show that a socket was accepted — the same shape of mistake, one level down, as the one that entry was already correcting. It now cites the handshake, quotes Avalonia's maintainer on airspace being by design, and links the still-open upstream issue. Three changes to the fix itself: - terminal.js skips the fit below 40px in either axis. The vendored fit addon floors its proposal at 2 columns by 1 row rather than refusing, so a degenerate viewport reflows the *remote* pty through window-change and mangles wrapped scrollback unrecoverably. Reachable today by minimising, and by dragging a splitter to the edge once splits land — a guard where the sizes arrive, not a special case for one caller. - FallbackValue=False on the binding. A compiled binding with no DataContext yields UnsetValue, IsVisible falls back to true, and the occlusion returns silently. Not reachable at runtime; it is what the previewer does. - The comment now says why it must be IsVisible on this control: detaching destroys the native control and the whole WebView2 process tree, so conditional content would pay a cold start per unlock, and hoisting the binding to an ancestor is unverified because NativeWebView's own bounds-and-scaling re-push fires only for its own IsVisible. Also recorded, not fixed: hiding does not suspend the page (visibilityState stays "visible" and rAF keeps firing at ~115/s, which is *why* the handshake completes while hidden); the conflict log can squeeze the terminal row toward nothing; and nothing hands the terminal Win32 focus after Connect, so the first keystrokes go to the shell's UI rather than the remote shell.	2026-07-29 13:42:23 +02:00
jaap-jan	0500e43e02	Stop the terminal's WebView painting over the setup screens ... The shell layered its setup and unlock screens over the terminal, which does not work: NativeWebView attaches a real Win32 child HWND through NativeControlHost, and a child window composites above everything its parent paints regardless of visual-tree z-order. The cards rendered sliced at the terminal column's left edge; at the window's default width every one of their buttons fell inside the WebView's rectangle, so the flow could only be completed by keyboard, and a click in that region handed Win32 focus to WebView2 so the text boxes silently stopped accepting keystrokes. The WebView is now collapsed while the vault is not unlocked. The comment that previously forbade this — hiding it means never realising it — was wrong: NativeControlHost creates the native attachment on attach to the visual tree, never consulting layout or visibility, and NativeWebView replays a Source assigned before its adapter exists. A collapsed WebView still starts WebView2, loads the page and lets the renderer attach. Confirmed: 35 msedgewebview2 processes with the control collapsed. What the first connection after unlocking actually depends on is the existing await on WaitForRendererAsync, since the data plane drops frames when no renderer is attached. Also fixes the second visible defect: the default server URL was https://localhost:7217, the API's *second* launch profile, while the README, its appsettings and a plain `dotnet run` all use http://localhost:5233 — so nothing was listening, and an HTTPS client against a plaintext port reports "The SSL connection could not be established", which reads as a certificate problem. The default now matches, a missing scheme is rejected by name instead of parsing as scheme "localhost", and that specific TLS failure now suggests http://. Both new tests fail when the fixes are reverted. Corrections to claims I made earlier and should not have: - docs/platform-flags.md asserted the opposite of the mechanism above and cited an established msedgewebview2 connection as verification. That observation was taken while the overlay was showing but, because of this very bug, the WebView was uncovered and in plain view — so it confirmed only that a visible WebView is realised. A process-level check cannot verify a rendering claim. The entry was also filed under "Local cache". - ITerminalHost was documented as the live seam the app plugs into, with a stub standing in for headless tests. It has no implementation anywhere and no test uses it; the view navigates the control directly. It also counted Avalonia.Controls.WebView and NativeWebView as two interchangeable backends when they are one component, with the Linux backend backwards. - The README claimed the shell's whole path was covered by tests. Its state machine is; its layout is covered by nothing, and a headless test could not have caught this — headless has no native window, so it would have rendered correctly and confirmed the wrong belief. Verified by screenshotting the running app: the card renders complete and centred at the default size, with the button clickable.	2026-07-29 13:26:30 +02:00
jaap-jan	49f617b450	Wire the Avalonia shell to the vault ... The host list now comes from the vault instead of from a form. A fresh machine takes a server URL, signs in through the browser, enrolls, and from then on opens with the passphrase alone. DodoSSH.Client.Session is the composition layer: where a profile lives, how it unlocks, and how a machine gets one. ClientPaths picks a non-roaming per-OS directory — %LOCALAPPDATA% and never %APPDATA%, because a SQLite cache that roams between two machines is a corrupt one, and each machine's outbox is its own. SessionOpener needs no transport at all and could not reach one if it wanted to; that is the offline unlock, asserted rather than asserted about. A wrong passphrase, a stale KDF and a grant revoked by a rekey are three different answers, because the remedies are three different things and telling someone to retype a passphrase that was never the problem is worse than saying nothing. The shell's states are the onboarding story. The recovery code gets its own state that cannot be clicked past: it exists for one moment, losing it with the passphrase loses the vault, and there is no server-side reset by design. It is dropped from memory on confirmation rather than merely hidden. Sign-in is a delegate over IVaultServer, so the whole state machine runs in a test against an in-memory server — no browser, no identity provider, no toolkit. The view models are plain observable objects, which is what makes that possible. What it does not cover is whether the XAML binds to the right names; that needs a rendered tree and Avalonia.Headless, and is its own piece of work. Three things found by doing it rather than by reading it: - Pooled SQLite connections keep the database file open after the last context is disposed. On Windows that means locked, so the application could never replace its own cache — and a test could not clean up after itself, which is how it surfaced. Dispose now clears the pool. - EF's SQLite provider puts the database in WAL mode, so the cache is three files. A comment in ClientCacheFactory claimed the opposite; reading PRAGMA journal_mode off a real launch settled it. WAL is the right mode here — a sync pass writes while the interface reads — so the comment was wrong on the merits as well as on the fact. - Enrolling a device key with nowhere to keep the private half would put a wrap on the server nobody can open and make the device list claim this machine can unlock without a passphrase. Device binding is now optional and the shell declines it until the OS keystore is wired. Verified on Windows: the client created %LOCALAPPDATA%\DodoSSH\cache.db and migrated it on first launch, and msedgewebview2 held an established connection to the data plane while the unlock overlay covered it — which is the point of covering the WebView rather than collapsing it, since a NativeWebView that is never laid out is never realised. 630 tests, up from 593. The recovery-code gate and the offline unlock were each verified by breaking them and watching the right test fail. Still to do for M1's actual definition of done: the manual run against the real API and a real Keycloak. Credentials are not a synced entity type yet, so a connection still asks for a password, and the interface says so rather than implying otherwise.	2026-07-29 11:02:19 +02:00
jaap-jan	5fccd53824	Add the Avalonia app and the xterm renderer, and fix two real bugs ... The terminal works end to end. A new integration test drives a real sshd in a container through a real PTY, the real pump, the real loopback WebSocket with its token and origin checks, and a ClientWebSocket standing in for the page: the login banner arrives, typed input round-trips, and `stty size` reports the 100x30 the session asked for. The only untested link left is xterm drawing bytes it was handed. The WebView is de-risked on Windows, which was the plan's largest risk. Not by assertion: with the app running there is an established TCP connection from msedgewebview2 to the data plane port, so WebView2 launched, navigated to the loopback page, executed terminal.js, and completed the WebSocket handshake against the real token and origin checks. Linux remains unproven and the package's own release notes now corroborate the concern -- Linux uses a WPE backend, and it ships a NativeWebDialog described as useful where embedded WebViews may be unavailable. Two bugs found by building it, both of which would have shipped: - ShellStream.Write buffers and needs an explicit Flush. Without one a keystroke is accepted, reported as written, and never reaches the remote: the terminal displays output perfectly and simply stops responding to input. SSH.NET's own WriteLine flushes, which is why the earlier spike never hit it. Found by isolating the pump against real SSH and reading BytesRead=51 -- banner and prompt through, nothing after. - The Windows app manifest needs a supportedOS list, or Avalonia's native control host fails outright and the terminal never starts. Also fixed a genuinely flaky test I happened to catch: SyncCursorTests tampered with the *last* base64url character, whose low bits the decoder ignores when the input length is not a multiple of three -- so a tampered cursor sometimes decoded to identical bytes and verified. It failed roughly one run in thirty, depending on a random key. Now tampers the penultimate character, which is fully significant at every length; 40 consecutive runs are clean. xterm 6.0.0 plus the fit and webgl addons are vendored as UMD bundles rather than built with npm, so a clean clone needs only the .NET SDK. Provenance and licences are recorded next to them, along with the UMD global names terminal.js depends on -- a bundle that switched to ES modules would load without error and leave Terminal undefined. The renderer acknowledges output from term.write's completion callback, not on receipt. Acknowledging early would return flow-control credit for bytes the screen has not caught up with, which is the one thing the credit window exists to measure. TerminalWorkspace moved into DodoSSH.Client.Terminal: it has no Avalonia dependency, and having it there is what let the end-to-end test exist at all. 404 tests pass, zero warnings on a clean rebuild, format clean.	2026-07-28 22:30:42 +02:00