8209f157417209134186364677f681b9cd818201
100
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jaap-jan
|
61139bd469 |
Move the SFTP and S3 connection into the right-hand pane
THE CONNECT BAR IS GONE. It was a 44-pixel strip across the top of the file screen holding a heading, a picker, a password box and a button — chrome spanning both panes in order to configure one of them, drawn at full width whether or not anything was ever going to be connected. Underneath it sat a pane that was empty for exactly the same reason, saying so in a sentence nobody had to be told twice. So the pane says it instead. Disconnected, the right-hand half is an invitation where the listing would be: what the screen is for, what pressing the button costs, and one thing to press. SELECT HOST opens the picker in place — the same combo, the same password box, the same CONNECT — and the sentence and the button go away with it, because by then they have been read or they have not. Two steps rather than a picker sitting open, and that is not decoration. The reason the pane is empty is the question, and a combo box in the middle of it is a form with no question above it. The two steps also keep the panel inside its budget, which is the pane's height less whatever the queue has taken — 268 pixels with three transfers on it. Neither shape reaches the floor, and the layout suite measures both. IsChoosingRemote is cleared by everything that changes what the picker would be picking: connecting, disconnecting, moving between the SFTP and S3 tabs, and losing the vault. The last two are the ones that would rot quietly — a picker surviving a hop to the other tab offers hosts on a screen showing buckets, and one surviving a lock offers a list that has just been emptied because its rows carried decrypted secrets. CANCEL takes the typed password with it, which is a secret nobody asked to keep. WHERE THE TWO CONNECTED FACTS WENT. The address chip and DISCONNECT are a strip of their own inside the remote pane, above the listing — not three more cells in the header beside UP, REFRESH and DELETE. That pane is 381 pixels wide at the window's minimum and a fourth control in that row would have pushed one of the three off the edge; the number is written into the markup so the next thing added to either row is measured against it rather than tried. The status line did not fit there either. What is left after a 170-pixel address and a DISCONNECT is about eighty pixels, which turns every sentence into its first word and an ellipsis, so while a session is open it is in the queue's own strip at the foot of the screen, which spans the window. The other half of the time it is inside the invitation, beside the button that provoked it. One home in each state rather than two homes in one and none in the other. The header label reads HOST or BUCKET now, which is the only thing on the screen naming the kind — the bar that printed SFTP or S3 is gone and the tab in the strip says it either way, whether or not this screen is showing. The opening status text was "Choose a host and connect to browse its files", which the invitation now says in a heading, a sentence and a button. It is "Nothing is open yet.": a state rather than an instruction. That string is shared with the phone, where it still reads correctly under the picker card that head shows directly. Desktop only, and the phone is unchanged rather than merely untouched. Its FilesScreen is one pane at a time, so the picker *is* what it shows before a connection exists; it binds none of the new members. Four tests. Three in the layout suite — the picker open over a full queue, which is the tall shape and the one that has to be measured with the panes at their least; the bucket picker, which is a row shorter because an object store has nothing to type; and a session open with a long enough address to prove the chip gives way before DISCONNECT does. The fourth is the picker's lifecycle in ShellFlowTests, over all four things that put it away. 302 tests pass across the two suites. |
||
|
jaap-jan
|
0c4bfea2a8 | Merge branch 'claude/group-creation-hosts-dragdrop-56c6a3' | ||
|
jaap-jan
|
f9d08b738c |
Take the group headings out of the host grid, and drop onto a group card
A first group turned the wrap of host cards into an accordion: SidebarRows interleaves a full-width fold-away heading — chevron, name, count — between the cards, and in a grid that reads as a dropdown somebody left open. The desktop grid binds VisibleHosts now. The headings and the fold stay for the phone, whose list has no room for the row of group cards the desktop draws above the grid. What a heading said, the card says: HostRowViewModel.GroupLabel, resolved once per reload like the tag names, drawn as an accent chip and absent from a host in no group — or in one that has been deleted, which is the same thing to look at. What a heading also was is the drop target, and that moves to the group cards. Two things go with it. A host dropped onto another host card used to be filed beside it, which was legible while a heading named the band of cards it landed in and is guesswork now; it is refused. And UNGROUPED was how a host was dragged back out of a group; the way out is the picker in its own editor, which is the one place "no group" can be said in words. A drag held at either edge of the grid scrolls it. Without that the gesture only works for whoever can see both ends of it: the group cards are the first thing in the scroller, the host may be the fortieth card down, and a drag cannot use the wheel. A step per drag event rather than a timer, so it follows the pointer and stops when it stops. The two heading-shaped tests are replaced. TheHostsGridHoldsCardsAndNoGroupHeadings asserts the grid's contents rather than only measuring them, because a heading that came back would lay out perfectly cleanly. TheGroupCardsAreWhatAcceptsADroppedHost raises a real DragOver over both kinds of card and checks the effects and the mark — the nearest a headless test gets to a gesture no headless test can synthesise. manual-checks 3.1-3.2 and 7.6-7.9 follow. |
||
|
jaap-jan
|
562fb444a8 |
Merge main into the phone connections branch
Main had already taken this branch's first two commits, so what merged is the Connections work against three things that landed beside it. Four of the six conflicts were prose about arrangements both sides changed; two were real. **The phone hub gained a Teams row while this branch was moving the keychain onto it.** Both are additions to `IsMoreSurface` and both belong: teams because the desktop reaches them from its rail and the phone through the hub, the keychain because a bottom bar is for the places a session moves between. The membership test, the back gesture's first case and the hub's own arithmetic all take the union. The distinction is now written down rather than implied — teams is the design's count plus one, and the keychain is the only rearrangement of it: the bar lost a slot to gain that row. **`ConnectAndAnnounceAsync` was the real one.** Main gave it `RememberTypedPasswordAsync`, which binds the password that just worked to the host it worked on; this branch had replaced the `HostRowViewModel` that method needs with a four-field `ConnectionTarget`. Keeping both meant deciding what a manual connection does with a password that succeeded, and the answer was already written on the screen it is typed into: nothing. There is no item to bind a credential to and none to bind it on, and that path saves nothing by design. So `ConnectionTarget` carries the row again — as a nullable, in place of the host id it had, with `HostId` derived from it. Two things read it and both are things that can only be done to a keychain item rather than to an address: naming the log entry, and keeping the password. Null is not missing data there; it is the whole of what makes the manual path different, and having one field rather than two keeps "was this a keychain host" a question with one answer. The desktop's rail lost SFTP and S3 to the tab strip on main, so the README's "a rail with nine slots has room" was true when it was written this afternoon and is not now. It says the room rather than the number. Phase 11's four new device checks and main's Phase 12 on teams were the same conflict twice — two appends to the end of one file — and both are kept. Verified after resolving: the solution builds, the Android head builds clean, and 837 tests pass across the seven client suites, including main's own additions (233 shell, 79 layout, 240 domain, 118 sync, 54 session, 74 terminal, 39 storage). |
||
|
jaap-jan
|
f5ffd1983d |
Make Connections the place a connection is made, and put the keychain away
Four changes to the phone, and the last one needed the connect path taking apart. **The bottom bar is three entries.** The keychain moved onto the hub, which is now SETTINGS with a gear rather than MORE with a hamburger. A bottom bar is for the places a session moves between, and keys, credentials and tags are managed occasionally and then left alone — which is the shape of everything already behind that hub. With the keychain on it, "more" stopped being a description of what is there. `ShellScreen.Vault` joining `IsMoreSurface` is the whole of the change: the tab that lights, the header that stands down and the back gesture's first case all read that one property, which is why the switch mirrors it by construction rather than by a second list. The keychain screen grew the header every hub screen has, because the shell's own is not above it any more and without one there would be no back arrow and nothing saying what the list is. The desktop keeps its Keychain rail entry. A rail with nine slots has room, so this is the second thing the two heads arrange deliberately differently, after the hub itself. **Terminal became Connections**, and the word does more work than a rename usually does — see below. The enum member stays `ShellSurface.Terminal`, for the reason the tab was never called Vault: the surface is a terminal, and the word a user reads is the product's. **The + puts the software keyboard away.** It sits above a terminal somebody is typing into, so the sheet it raises was arriving underneath a keyboard covering the half of the screen the sheet is on — and worse, laid out into the strip left above it, since the keyboard's inset shortens everything this head draws. Avalonia cannot do this and it is worth knowing why: `TopLevel.InputPane` reports the keyboard and offers nothing that closes one, because the framework's model is that it belongs to whatever has focus — and this keyboard was raised by the `WebView`'s own text input, by a native view Avalonia's focus manager never owned. Clearing Avalonia's focus leaves it exactly where it is. So `Platform/SoftKeyboard.cs` asks `InputMethodManager`, off the decor view's window token, and every step of it is allowed to be absent. **With nothing open, Connections is a connect screen rather than an empty state.** A box taking `user@host` or `user@host:port`, a password, and the machines most recently connected to underneath. The box is the only path in this product to a machine the keychain has never heard of, which is a real case it had no answer for: an address somebody was handed five minutes ago. A typed password and nothing else — offering the keychain's keys would be a second binding resolution beside `TryBuildAuthentication`, and the argument against a second one is written there at length. Nothing typed is saved, and the screen says so: a machine worth keeping belongs on HOSTS, where it can carry a key, a group's defaults and a name. The recents come out of the vault's own connection log rather than a list kept in this process, so they survive a restart and arrive on a new phone with the keychain. Deduplicated by address, because this is a list of places and not of events, and capped at six so the box stays above the keyboard. Emptied when the vault is — they are decrypted entries naming where somebody works, and a lock that left them on screen would be a list still readable after every key that decrypted it was zeroed. Tapping one leads to whichever of two things it is: a keychain host goes to that host's connect bar, where its key, its password box and its refusals already live, and an address goes back into the box, without the password, whose absence is the point of that path rather than a gap in it. **The connect path was shaped like `HostRowViewModel` all the way down.** The log entry, the identification, the failure record and the retry all took a row. They take a four-field `ConnectionTarget` now, so a connection to an address shares the ladder of refusals, the host-key question and the tab's lifecycle rather than growing a second copy of them. `ConnectionRecorder.Record` and `Identify` have always taken a nullable host id, so the log could already hold a connection with no item behind it. One behavioural change falls out of that and it is the one to know about: **trusting a host key now retries the attempt that raised the question** instead of re-running whichever host is selected. That was correct while a selected host was the only way to connect; with a manual target it would dial a different machine, or refuse with "choose a host first" over a key the user has just agreed to trust. The test selects a host first, so a regression cannot pass by connecting to the wrong thing successfully. `LogsViewModel.ReloadAsync` split so the connections half can be read alone. Reading the keychain's activity for a screen that offers neither would double the decryption on the list that was already the expensive one. Twelve tests: the parse grammar as a theory over seven refusals, the dialled request, the retry, and both branches of tapping a recent row. The recents rows are built by hand rather than connected-and-closed — what those tests are about is which branch a row takes, and driving it through the recorder's queue would test the recorder, which `DodoSSH.Client.Session.Tests` already does. What needs a device is phases 11.6 to 11.9 of `docs/manual-checks.md`. |
||
|
jaap-jan
|
0d239bcd6c | Merge branch 'claude/adding-hosts-phone-docs-e472b0' | ||
|
jaap-jan
|
84b198bda0 | Merge branch 'claude/host-password-persistence-2c2c1f' | ||
 jaap-janandClaude Opus 5
|
7e4e068aab |
Merge main into the teams branch
Two conflicts, and both were two people counting the same things differently rather than disagreeing about what the code should do. PhoneShell's header comment. The branch made "the five hub screens" numberless, because TEAMS made it six and a number in that sentence had already gone stale once. Main corrected "three destinations" to "two" in the same sentence, because giving a shell the whole phone took the terminal out of the set the header is drawn on. Both are right and neither noticed the other: the header now stays on the hub's screens and on the two top-level destinations, which is Hosts and Keychain. The manual checks. Both sides appended a Phase 10 — main added the software keyboard and the phone's terminal surface as 10 and 11, the branch added Teams. Nothing about them overlaps, so the resolution is to keep all three in the order they were written and renumber Teams to Phase 12, its subsections and the one cross-reference inside 12.1 with it. Main's two phases keep the numbers they already carry in its history, since renumbering those would move headings somebody may already have linked to. Everything else merged without a conflict, and the two places worth checking afterwards both held: IsMoreSurface and the first case of PhoneShell.OnBackRequested each kept ShellScreen.Team alongside main's edits. Those two are one fact in two places, so a merge that dropped Team from either would have trapped the user on the teams screen with the MORE tab dark. Verified after resolving: solution builds with no errors and no new warnings, the Android head builds, and every suite passes — App 214, Layout 73, Api 162, Infrastructure 34, Contracts 25, Session 54. App gained the three shell-flow tests main brought with it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-jan
|
b86ff6158b |
Keep the password that just worked, so the host stops asking for it
The vault has held credentials and host bindings since they landed, and the only route from a typed password into one ran through two screens: add a password under Keychain, open the host, bind it. The password box's own tooltip instructed people to do exactly that by hand — which means typing the secret a second time, into a screen that has no idea which host it is for, while the screen that does have the password is the one being left behind. A tick beside the box does it in one step. What it produces is an ordinary CredentialSecret, named after the host, bound through CredentialId with AsksForPassword cleared beside it. That is the whole reason nothing else here had to change: it syncs, it merges, it appears in the keychain, it can be renamed and deleted, and it can be bound to the other nineteen machines that share the account. A password field on HostSecret would have been a payload schema bump, a fourth place a secret lives, and a copy per host to rotate and forget. It waits for a handshake the remote accepted, and that is not caution for its own sake. Binding on the keystroke would store whatever was in the box — including the typo about to be refused — and the host would then stop asking, leaving a machine nobody can connect to until they work out that the keychain is where the wrong password now lives. For the same reason the password is read from the credential as dialled rather than from the box, which stays typeable throughout a handshake. Off by default, because the typed box exists precisely for the passwords that should not be in a synchronised vault — a one-off on a machine somebody will never open again. The credential is written into the host's own vault rather than the active one: in the personal vault, bound to a team's host, it would be a binding every other member can see and none of them can resolve. One thing is given up knowingly. The confirmation naming where the password went is replaced a moment later by the auto-sync's own count, exactly as SaveHostAsync's "Saved 'x'" is; this follows that rather than becoming the one write that suppresses a sync line. The feedback that lasts is the row answering "credential" and the box disappearing — which is also the only way to store a password on the phone at all, since that head lists credentials but has never had an editor to create one in. |
||
|
jaap-jan
|
8da58db5ce | Merge branch 'claude/host-connection-top-bar-25d04e' | ||
|
jaap-jan
|
80ae586fc4 |
Give a shell the whole phone, and one bar to leave it by
A connected phone was drawing five rows of chrome around the thing the user opened it for. The vault header at 56, the terminal's own tab strip at 52, a connection line at 36, the shells strip at 46 and the four-entry bottom bar at 64: at 360dp that is about a third of the display, and every row of it was about somewhere the user was not. What replaces them is one 52-pixel bar drawn by the surface itself — back on the left, the session pills, and a `+` across from them — and then the terminal. Three of those rows belong to `PhoneShell` and each is now bound on `IsShowingPages`. That is the same question asked once rather than three conditions that could drift: the surface is either a page or a terminal, and these are the chrome a page has. The header needed a wrapper because Avalonia's bindings have no "and" and it already had a condition of its own; the strip needed one for the same reason. The bottom bar had none and is bound directly. The back arrow goes to the page the terminal was opened over rather than to Hosts by name, because the system back gesture already picks that and an arrow landing somewhere else would be the second of two answers to one question. The bar's `+` raises a sheet offering the three connections this application can make — a shell, a host's files over SFTP, a bucket — since SFTP and S3 used to be two taps through the bottom bar's MORE and the bar is not on screen here. A control that replaced it and led to one of the three would have quietly removed the other two. Two things moved rather than being dropped. The text-size buttons are pinned at the right-hand end of the accessory key row, outside its scroller: the connection line existed to keep them from scrolling out of reach, and being outside the scroller answers that argument rather than abandoning it. The dialled address moved onto the connecting card, which is the moment it is worth reading — what is being connected to, before anything has answered — and after that the shell's own prompt says it more accurately than a header derived from the keychain ever did. The sheet collapses the renderer rather than covering it. Whether Android's `WebView` composites above Avalonia content the way Win32's child window does is still unverified — `docs/android-port.md` has said so since the port — so this follows the desktop's palette and gives up the rectangle outright, which is correct under either answer. It collapses `IsTerminalShowing` and not `IsTerminalSurface`, because the bar the sheet was raised from is part of that surface and dropping it would take the bar, the tabs and the whole arrangement with it, leaving the sheet floating over the page underneath. `OnSurfaceChanged` is the one place the flag is lowered, and that is the load- bearing half. Every way out of a terminal ends there — a destination, the files screen, the palette connecting to a host, closing the last tab, a lock — and each of them would otherwise leave a sheet set over a page. Not merely untidy: the flag holds the renderer blank, so the next return to the terminal would draw the menu again over a rectangle kept blank by it. Opening is refused off the terminal surface for the same reason from the other direction. The back gesture gains a guard above the switch, in the shape of the editor guard that arrived with the phone's `+`. It is nearer than any of them: with no header and no bottom bar, while the menu is up that gesture is the only way off it other than the scrim and CANCEL. The bottom bar's Terminal entry lost its `IsCurrent` binding. The bar is collapsed on that surface, so the binding could only ever be read as false, and a rule about a state the control cannot be in is a claim that it can. Three tests in `ShellFlowTests`, which is where shared state-machine behaviour for this head goes: the collapse and its recovery, the refusal to open over a page, and the sheet lowering both by a menu entry and by a route it was never wired to. Everything visual needs a device, so it is phase 11 of `docs/manual-checks.md` — and 11.2 is the check that would finally settle the compositing question this head has carried as unverified since the port. |
||
|
jaap-janandClaude Opus 5
|
a43286ece8 |
Let a team change hands, and be joined by somebody with no account yet
M3 built teams and stopped short of the two operations that decide who controls one. Both were written down as refusals rather than omissions: ADR 0009 listed ownership transfer under "deliberately not built", and design-import-gaps said an invitation needed "a token with a lifetime and an outbound mail path". One of those reasons had expired and the other never applied — an invitation does not need a token if it is not a thing anybody presents. Handing a team over is one write. The member you name becomes owner and you become an admin, in a single transaction, because ownership is sole: promoting first leaves the team owned twice, demoting first leaves it owned by nobody, and there is nobody left with the authority to finish a transfer that stopped in the middle. That is also why it is not two calls to the role endpoint, which refuses Owner outright. The outgoing owner is demoted rather than removed — removing them would revoke their vault key grants and flag every team vault for rekey, which is a far larger act than the one asked for, and somebody handing over a team is usually staying in it. It unblocks the thing that was impossible before: an owner can now leave, by handing the team on first. An invitation is a standing instruction rather than a message. This server has no outbound mail path, so nothing is sent and there is nothing for the invitee to present. The row says the next account signing in with that address joins this team at this role, and telling them to sign in is the caller's job over a channel this server does not carry. A link nobody can deliver would be worse than none. It lives in its own table rather than becoming a membership with MembershipStatus.Invited, and that member stays unwritten for the reason it always was: team_membership.user_id is not nullable and carries a foreign key, so somebody who has never signed in has nothing for that row to point at. Widening it would make the unique index on (team, user) meaningless, because PostgreSQL counts every NULL as distinct. Verification is the security boundary, and nothing in this server read it before. A claim requires the access token to assert email_verified. An invitation decides what the server will serve, so one claimable by anybody able to obtain a token carrying somebody else's address is a way into a team — which is precisely the attack OidcOptions.AllowEmailLinking exists to refuse, and it would have been reintroduced by the back door. There is deliberately no setting that relaxes it: a flag that exists is one somebody turns on for the afternoon their provider is misconfigured. Absence is refused rather than trusted, and logged, because a provider that never sends the claim otherwise leaves every invitation pending with nothing anywhere saying why. Claiming happens at just-in-time provisioning and again on an hourly sweep. The sweep is what makes it recoverable rather than one-shot — an invitation issued between an account being created and that person next signing in would otherwise be stranded for ever — and it shares its rate with the last-seen write because both are housekeeping nobody is waiting on. Archiving is refused while a team owns a vault, and that refusal is the end of the road rather than a step on it. A team vault is readable because of membership, so archiving one that still owned vaults would take them away from everybody holding a key, including the caller, quietly and all at once. Nothing in this product deletes a vault, so no order of operations gets past it today — which is stated with a count of what is in the way, for the reason the SFTP layer refuses a recursive delete: a refusal is visible and a quiet removal is not. It is owner-only, as handing over is; renaming is not, because a rename is visible to everybody and reversible by anybody who can do it. The slug is not renameable at all: it is unique only among live teams, so a rename could take one an archived team is still holding, and that team could then never be restored. LAST ACTIVE is real and coarse on purpose. UserAccount.LastSeenAtUtc is refreshed on ordinary authenticated requests, at most once per account per hour, through ExecuteUpdateAsync — user_account carries the xmin concurrency token, so a read-then-write on the hot path would start losing races between one user's own overlapping requests. An hour is the granularity the question is actually asked at, and the interface draws it to the day rather than the minute so it does not read as a precision that is not there. The remarks in Contracts and in the view model that argued at length for the column's absence are rewritten rather than extended; both had become false. Two endpoints already existed and nothing called them. ChangeTeamMemberRole and ListVaultGrants have been reachable since M3. The role picker refuses Owner itself rather than letting the server do it, since the interface already knew the rule; the key-holder list sits under the vault rather than beside the member, because a grant is per vault and a count on a member row would imply per-item sharing, which is M5. It lists withdrawn and stale grants and says which they are — a list that dropped them would show a departed colleague as merely absent rather than as somebody whose key was taken away — and staleness is decided by comparing generations, since a grant can be Active and still open nothing. ADD MEMBER stopped being a dead end. An address the directory did not know used to end at a sentence telling the user their colleague had to sign in first. It invites them instead, from the same button, because which of the two applies is a fact about the server's account table rather than about what the user is doing; which one happened is reported afterwards, because that decides what they do next. An address that merely has an account is invited rather than refused: refusing would have made the endpoint an oracle for which addresses have accounts here, answerable by anybody willing to create a team first. The phone has a TEAMS screen, behind MORE, and it is the reverse of every other row in design-import-gaps: a shipped screen the design had no slot for. It is there because an invitation is claimed by signing in, so somebody told they are now in a team is at least as likely to be holding a phone — and a membership visible only on a head they never installed is one they cannot see. It draws SHARE KEY and nothing that takes something away: wrapping a key is the one act on that screen a server cannot perform at all, and the desktop guards its revocations with a tooltip, which is a control a touch screen cannot show. Two defects were found by an adversarial pass and both were green against the whole suite at the time. The owner-only check on archiving and handing over had been weakened to the admin check while their messages and comments still said owner — and since nothing behind the archive endpoint re-checks it, an admin the owner had promoted could have archived the team out from under them. And the rename endpoint built its response with a hardcoded Owner role, so an admin who renamed a team was handed a summary claiming they owned it, and a client trusting that instead of re-listing would have offered them the two owner-only buttons the server then refuses. The new table gets its constraints tested rather than merely migrated: live uniqueness per (team, address), the citext proof that an address typed by a person matches one cased by a provider, and reissue after both revocation and acceptance. The teams screen gets its first entries in the layout suite, at the minimum window with every list populated and with each of the two states that cover half of it — it had none, and it just grew four sections and a second line in the member row. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-jan
|
6fe2b21781 |
Point every build at the hosted server, not just the ones that ship
The default was split on DEBUG so a clone would offer localhost and only an installed build would offer ssh.dodotech.cloud. That protected development launches from enrolling a device against production. It also meant the address in the box depended on how the binary was built, which is not what was wanted. Working against a local API now means typing http://localhost:5233 by hand. |
||
|
jaap-janandClaude Opus 5
|
16e0051e89 |
Draw the tags that have been storable and invisible since the domain landed
`Tag` has been a full item kind for three commits — a table, a migration, a codec, a merge, a cipher — and `HostSecret.TagIds` has merged per tag so two people tagging one host both keep theirs. Nothing drew a chip. The tags a client could store were ones nothing here could see. Chips on host rows, both heads, from names resolved through the tag list rather than ids: a tag that does not resolve is left out rather than drawn, because it means the tag was deleted elsewhere or belongs to a vault this session cannot read, and a host with one chip fewer is the honest answer where a host wearing a GUID is not. The id stays on the host, so the chip comes back if the tag does. The picker is chips that toggle, matching the chips on the row behind it. A list of names to tick would make the user match an entry to a chip they can see two inches away. The box under it creates a tag and puts it on straight away, because that is when a tag is usually wanted — while tagging a host and finding it does not exist yet. Unlike every other field in that editor it writes to the keychain immediately, since a host can only name an id that exists; cancelling therefore leaves the tag behind, which is honest rather than hidden. A name that already exists is used rather than repeated: two tags called "staging" are storable and must stay storable, because two people creating one offline is how it happens, but typing it into a box beside a chip of the same name is a slip. Renaming and deleting needed a home, or the picker fills with names nobody uses and never empties. That home is a TAGS category on the keychain screen, where every other item kind is managed — and renaming is the whole reason a tag is an item rather than a string repeated inside twenty payloads: it is one write, and no host is touched. The delete confirmation counts the hosts wearing it, which is the difference between a tidy-up and losing a filter somebody relies on. The desktop host editor now scrolls, and that is not a tidy-up. A picker's height is a chip per tag in the keychain, wrapped, so somebody with fifteen tags has an editor half again as tall as somebody with three; no fixed height holds that, and trimming other fields to buy room only moves the failure to whoever has sixteen. The layout suite caught it the moment its seeder grew tags — which is why the seeder now creates ten rather than three, enough to drive the pane onto its cap so the capped shape is what gets measured rather than one no real keychain produces. The cost is named where it is paid: the harness skips anything inside a ScrollViewer, so from here it certifies that pane fits the column rather than that every field in it does. Two smaller things fell out. Five buttons overflowed the keychain header by a few pixels, so GENERATE lost the word KEY — its tooltip carries what the word did. And TotalItemCount had been counting keys and credentials while ALL showed four kinds; it counts all five now, because a number under a chip that disagrees with the rows it opens is worse than no number. An adversarial review of this change found two defects it had introduced, both green against the full suite. NewTag filed into the "new items go to" picker while the tag list only ever holds the active vault's — so with a team vault selected a tag would be created, queued for push, reported as added, and then invisible, with no row, no count, no picker entry and nothing able to rename or delete it, because there is no active-vault switcher to go and find it with. The comment on the host editor's own create path states that exact rule; this was the one place that broke it, and NewObjectStore, whose list is likewise active-vault-only, already ignored the picker. And the tag editor was the only one of five that did not disarm a pending deletion when it opened, so arming a key's deletion and then pressing + TAG left a live DELETE for an item the user was no longer looking at, directly above the boxes they were typing into. Both are fixed, both have a test, and the first was checked against the broken version before being kept. The same review caught a doc comment that had been inserted between SnippetRowViewModel's summary and its declaration, silently taking it over. Verified by the whole suite on a clean build: 1413 tests over nineteen projects, none failing. Both heads build. The rectangles the layout suite cannot reach are phase 9 of docs/manual-checks.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
4925dcf179 |
Give the phone the + it was promised, and the editors behind it
Steps 5 and 6 of docs/adding-hosts-on-the-phone.md, which finishes it. The phone can now put things in a keychain rather than only read one. The floating + arrives three designs after it was first asked for. It was refused twice on the honest grounds that it would open an editor this head had not got — and that stopped being true when steps 1 to 4 landed. It raises a sheet rather than a form, because "add" on this screen has been two operations since groups existed: a host, or a group to file hosts under. Both editors are cards in the list's own row, swapped for the list rather than stacked over it, following SnippetsScreen and for the reason written there: a form on top of the list hides what it is about. There is still no dialog and no editor screen anywhere on this head. The port and username boxes may be left empty, and the greyed text inside each is what the host will actually use — following the group picker as it moves, so the form says what leaving a box blank will do rather than making it a guess. The back gesture gains a guard above the switch rather than a case inside it. An editor is not a screen and has no entry there, and it is strictly nearer: the sheet sits over the editor's own screen, so back lowers whatever is topmost before it considers moving between screens. A group editor needs a way in, and the phone draws no groups panel — so the heading in the host list gains a pencil. A + that adds groups with no way to correct one is the same strange thing to ship as one that adds hosts with no way to correct one, and worse: a group's defaults are what every host beneath it falls back to. Scouting step 6 turned up a bug worth more than the prose it was looking for. ReloadGroupsAsync read the active vault alone, which was a cosmetic limitation while a group carried only a name — a teammate's host showed under UNGROUPED and nothing else was lost. Since a group began lending a port, a username and a binding, the same omission silently dropped all three: that host would dial 22 as nobody while the machine is on 2222 as deploy, with nothing on screen saying why. The resolution map now spans every readable vault. The editable list stays narrow, because a row shown across vaults needs a vault id for rename and delete and two vaults may hold groups with one name — but the map needs none of that, since it is only ever asked what an id says. An adversarial review of this change found something I had written a comment denying. The + was a child of the outer Panel rather than of the list's row, so it anchored to the bottom of the screen and sat squarely over the new EDIT button and the lower edge of CONNECT — and because a Panel hit-tests its last-declared child first, tapping the right end of EDIT would have raised the add sheet. The comment beside it claimed it was in the list's row precisely so that could not happen, and manual-checks 8.1 names that exact failure. It is in Grid.Row 2 now. The same pass caught a connect bar that was disabled rather than hidden while its own comment said hidden, a scrim that would have flashed its default pressed chrome across the screen, a fab comment claiming an accent fill no other button had when Button.primary has it, and a back-gesture remark naming two view-model properties that do not exist anywhere in the repo. That last one came from this plan, which invented IsVaultsSurface and IsConnectionsSurface, and pointed step 6 at a ConnectionsScreen.axaml that has never existed. Both are corrected in the plan rather than quietly worked around, along with a fourth "groups are flat" site in README.md that step 1 missed. The phone's rectangles are not measurable and structurally never will be: the layout suite is net10.0, the Android head is net10.0-android, and Avalonia's application is a one-shot process global — so a second head cannot share the process even if the reference were possible. Everything the sheet and both editors bind to is shared and is tested headlessly here; the pixels go to docs/manual-checks.md phase 8, nine checks, which is where this project already sends what it cannot assert. Tags remain the one thing asked for that did not ship. Tag is a full item kind and TagIds merges, encodes and resolves, but no screen draws a chip or offers to add one, so the tags a client can store are ones nothing here can see. Both editors carry the set through a save untouched so a client that can set them does not lose them. Recorded as half-shipped in docs/design-import-gaps.md rather than quietly left out. Verified by the whole suite: 1402 tests over nineteen projects, none failing. Both heads build. Nothing seen on a display — phase 8 is what that costs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
b7335743d9 |
Make a host take what its group lends it, everywhere it is read
Step 4 of docs/adding-hosts-on-the-phone.md. The domain could resolve a host against its groups; nothing asked it to. This is the wiring, and it is mostly one change repeated: read the resolved host, not the stored one. TryBuildAuthentication and TryBuildConnectionRequest now take the resolved value beside the stored one, which is where group context was being lost. It is the only authentication resolution in the product — both heads and both transports come through it — so a host inheriting its binding would otherwise have been offered a password prompt on every screen at once. The credential-username fallback becomes three levels, and Complete still refuses an empty username, but now only after the chain has been walked; refusing before it would refuse exactly the hosts inheritance exists to serve. HostRowViewModel carries its ResolvedHost, resolved once when the list is built. Address, Authentication and Dialled read it, so a row cannot disagree with itself about what it dials — and MainWindowViewModel.Rank searches Address, so a host inheriting 2222 that displayed 22 would have been unfindable by the port it actually answers on. HostsBoundTo counts over the resolved binding, which is the difference between a warning and a silence: a key bound once on a group and inherited by twenty hosts named nobody, would have been deleted, and would then have refused all twenty at connect time. HostFields.From is answered by a refusal rather than by threading a group list through the sync engine. A relay host may not inherit its port. The reason is stronger than the convenience: a plaintext column is a derived duplicate the client supplies when it pushes *this* host, so an inherited port would make it depend on another item — editing a group would change what the relay dials for every host beneath it, except that nothing re-pushes those hosts, so the server would keep dialling the old port until each was next touched for some unrelated reason. A stale wire on the relay path connects the user to the wrong service. The editor distinguishes unset from explicit in both directions. An empty port box means "take the group's" and shows what that will be as a placeholder, following the group picker as it moves — a pre-filled 2222 would have been indistinguishable from one the user typed, and saving would have pinned it. The authentication picker gains a fourth entry, offered only to a host in a group, because for an ungrouped host it would behave exactly like the first. Which found a real defect while the tests were being written. Filing an ungrouped host into a group silently pinned it to a typed password: the picker had no "Inherit" entry when it opened, so it sat on "Password (ask each time)", and saving wrote that as a decision — the host would have been pinned to a prompt nobody asked for and the group's key would never have reached it. Two guards now: the picker is rebuilt when the group changes, and BuildHost writes AsksForPassword only for a host that had the alternative on offer. The group editor is here too, and the plan never assigned it a step. Without it no group can carry a default, so every line above would have been unreachable. It grows a parent picker that leaves out the group itself and everything beneath it — a courtesy rather than the guarantee, since a cycle assembled from two offline re-parents was never offered that list — and three defaults beside the name, each of which may be left empty because "lend nothing" is an answer. Tags are stored and not editable. TagIds merges, encodes and resolves; no screen can set one yet, and the editor carries the set through a save untouched so a client that can set them does not lose them to somebody editing a port. Eight new tests, and they dial. That is the point of them: a resolved value that never reaches SshConnectionRequest is a label, and every one of these failures would be silent — a host connecting to the wrong port, or being asked for a password it does not need, with nothing on screen admitting it. Verified by the whole suite: 1390 tests over nineteen projects, none failing. Both heads build. Nothing on the phone has changed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
c00e5dbc5c |
Let the terminal's text be made bigger, and remember how big
Taking pinch-zoom off the phone left nothing in its place, and there was nothing on the desktop either. This is the replacement, and it is deliberately not the thing that was removed: zoom scales what has already been drawn, so the remote goes on wrapping to a width that is no longer on screen. Changing the font size refits the grid and reports the new column count, so the far end is told it has fewer columns. That round trip is the feature. The size is one number, owned by the shell. It has to be, for two reasons that pull the same way: it must survive a relaunch, and it must be reachable from a phone that has no Ctrl key to press. So the page asks and the host decides — a signed step over a new client opcode, answered with a size over a new server opcode. The phone's buttons and the desktop's chords arrive at the same place, and a size set by either is the size both remember. Stored in settings.json beside the cache rather than in it, and that is not laziness about a migration. The cache is encrypted and unreadable until a vault is unlocked, and the first terminal of a locked launch needs the size already. Nothing secret may go in that file; ClientSettings says so out loud, because the next person to add a preference is the one who needs to read it. Where it is reachable from differs per head, and only here. The phone gets A− and A+ on the connection line — not in the accessory row, which scrolls, and a control that fixes unreadable text must never be the thing that is off-screen. The desktop gets the three chords every terminal emulator has, answered by the page while a terminal has focus and by the window when it does not, plus a row in preferences that shows the current value and names the chords rather than replacing them. Someone whose terminal is too small to read is not in a position to go looking. Clamped 8 to 32. Below eight a monospace grid stops being legible and becomes a texture, and every column of it is still a column the remote is being told exists; above thirty-two a phone in portrait has too few columns to hold a prompt. The buttons disable at the ends rather than accepting presses that do nothing, which on a terminal reads as the application having stopped responding. The preferences screen's header comment claimed none of the design's terminal settings could be saved, and listed the three things that were missing to make one work. All three now exist, so it says which one is real and why the other five still are not. Verified with the protocol suite — including that the step byte round-trips signed, since read unsigned a step down arrives as 255 and clamps to the largest font, making "smaller" do the most dramatic available version of "larger" — a data-plane test that the chord is heard with no session registered, and five shell tests: the default matches the renderer's, both clamps hold, reset works, and a size chosen in one shell is there in a second one over the same profile directory. Layout suite and both heads build. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
ddf0dd6a2b |
Stop the transfer tests depending on which thread ran them first
Every test in TransferQueueingTests failed on the Linux runner with "The calling thread cannot access this object because a different thread owns it", and none of them had anything to do with the commits in that run. The class drained its rows through Dispatcher.UIThread.RunJobs(). That dispatcher is process-wide and belongs to whichever thread touched it first, and xunit runs each test class as its own parallel collection — so the moment a runner scheduled another class onto that thread ahead of this one, all nine died inside DispatcherOperation.Execute having asserted nothing about transfers at all. It passes locally and fails on a machine that schedules differently, which is the whole of why this took a CI run to find. TransfersViewModel now takes the poster it marshals through, defaulting to Dispatcher.UIThread.Post — the seam VaultViewModel's clipboard already is, for the same reason: a view model that reaches a process-wide UI object directly makes every test of it depend on a thread it does not choose. No head passes the parameter, so nothing about the running application changes. The test supplies a queue of its own and drains it, which is the same shape the dispatcher gave it. A poster that ran the action inline was tried first and is wrong: the transfer queue raises Changed from its pump thread as well as from the call that enqueued, so inline execution has a background thread adding rows to an ObservableCollection while the test reads it — it passed once and then failed a different test on the next run. Draining keeps every mutation on the thread doing the asserting, which is the one thing the dispatcher was providing that was worth keeping. One test added for the property that broke: queueing is reachable from any thread and must not care which. The class as a whole guards the seam — remove it and nothing drains, so every assertion about a row fails. Verified by reproducing the failure first: a throwaway probe that touched the dispatcher on one thread and posted and drained on another produced exactly the CI message. Then six consecutive Release runs of the app suite, all green, plus the layout suite, which builds a TransfersViewModel of its own. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
73c7e2a1e3 |
Point a release build at the hosted server, and a debug build at the clone
The shipped default was http://localhost:5233, which is the address the API serves under dotnet run and a machine an installed application is not running. Somebody who installs a release and accepts the field unread is signing in to nothing. Two defaults now, because the two audiences never overlap. A release build offers https://ssh.dodotech.cloud, so a first launch needs no address typed at all. A debug build keeps the loopback address, and that half matters as much: shipping the hosted address into a clone would point every development launch at production, and sign-in is the call that provisions an account there. The remark carries the reason the schemes differ, since the pair now looks like an oversight rather than the deliberate thing it is — the API's first launch profile is plaintext on 5233, and an HTTPS client meeting a plaintext port reports a TLS failure that reads like a certificate problem. The test spells out both branches rather than asserting the constant, which would pass however it were edited. What it is really guarding is that a release never ships a developer's loopback address and a debug build never points a clone at production, and it can only guard those by naming them. Verified by running the shell suite in Debug and in Release. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
jaap-jan
|
4300d917a8 |
Stop making people wait for a handshake, and give the host list a pointer
Connecting held the vault's busy gate, which meant a window that did nothing visible for as long as a machine took to answer — and against one that is merely asleep, that is the whole timeout. The gate is gone from that one command. A tab now appears in the strip in the same turn as the click, carrying "connecting…" rather than a pane, and the terminal's rectangle draws a card naming the host and the address being dialled. Every other screen stays usable, and two connections can be in flight at once. That splits the vault's one connection event into three, carrying an attempt id, because "which tab is this about" can no longer be answered by "the most recent one". The id also buys the two kinds of not-connecting their different endings: a refusal stays in the strip as a tab holding its reason, since by then the user is quite likely three screens away and a status line they are not looking at is not where a failure should end; a host key question takes the tab away and puts the window back on HOSTS, because the prompt is drawn there and a tab claiming failure would be competing with the thing about to resume it. ConnectAsync takes no CancellationToken any more, and that is load-bearing rather than tidying. A [RelayCommand] over a method that takes one generates a command that cancels the previous execution's token on every invocation — so asking for a second machine silently abandoned the first, measured as the first tab disappearing with "Cancelled." the instant the second was asked for. Giving up on a connection is closing its tab, and a session that lands after that is adopted rather than dropped: a shell running with nothing naming it cannot be closed at all. A tab is marked active on IsShowing rather than IsSelected. The selection survives navigating away — that is what makes the strip a way back to a terminal instead of a way to lose one — so a tab lit while preferences filled the window was a second "you are here" mark pointing at something nobody could see. The nav rail's own entries have always made this distinction. The host list grows the two gestures it looked like it already had. A right click selects the row under the pointer before opening a menu of Connect, Edit and Delete — the menu is on the list rather than in the item template, so its entries are the vault's own commands and not a row's, and it is cancelled outright over a group heading. Dragging a host onto a heading files it there, onto a host files it beside that one, and onto UNGROUPED takes it out of a group; the write is one field of one host through the same repository a save uses, refused while the editor is open because a drop is a gesture on the list and not on a half-typed form. Clicking a result in the palette connects, which is what a list of hosts under a search box looks like it does. It went through the shell's own command, so the pointer and Enter take one path. And the files screen's two pickers followed the vault's lists once, at unlock: a host or a bucket created afterwards could not be picked until the keychain had been locked and opened again, with nothing on screen explaining why the machine plainly in the host list was missing. They follow the collections now, re-finding the selection by id across the rebuild a sync pass causes every minute. 165 shell tests and 69 layout tests green, including the connecting tab, both failure endings, two connections at once, a connection in flight across a lock, and the right click acting on the row under the pointer rather than on the selection. The drag itself is in docs/manual-checks.md with the rest of phase 7 — headless Avalonia has no platform drag, and a test that claimed to have dropped something would pass while confirming nothing. |
||
|
jaap-jan
|
7a3a521c59 |
Give the phone the rest of its screens, and a way in
All seven screens of the design, plus the two it does not draw because it starts at an enrolled phone: naming a server, and choosing a passphrase. The five states docs/android-port.md worried about losing at 360dp are all here and none of them softened. The changed-key refusal is a full-screen panel rather than a bottom sheet, because a sheet is swipe-to-dismiss by convention and that screen must have no way forward. The recovery code raises FLAG_SECURE for its own state and lowers it afterwards, so the sentence about screenshots is true rather than decorative. The delete confirmations keep their counts and replace the row in place. Signing in works, and the seam it needed is worth more than the implementation: IAuthorizationCallback now sits between OidcClient and the loopback listener, so the two heads differ in where the response arrives and in nothing else. PKCE, the state check, discovery, the token exchange and the key binding stay one implementation — a second OIDC client would be a second place for a security bug to live. The phone registers a private-use scheme with the system rather than binding a loopback port, which on a shared device any other app can do first. The accessory key row needed TerminalWorkspace.SendInputAsync: ordinary typing goes from the renderer straight down the socket, and there was no way in for the keys a software keyboard does not have. Ctrl latches, because one thumb cannot chord, and the latch is drawn — a modifier that is on and does not look on is how somebody sends ^L to a database prompt believing they typed an l. 597 client tests green, including two new ones for the input path and one for the terminal surface command. Nothing has run on a device. |
||
|
jaap-jan
|
2caedd93ff |
Merge branch 'main' into the Android head
Main grew the screens the host-management plan called for — hosts, pins, snippets, logs, import, teams — plus the ObjectStore and Import projects behind two of them, and moved WindowsDeviceKeyStore into the desktop head's Platform folder. Five of those view models landed in a directory this branch had already moved, so they join the rest in DodoSSH.Client.Shell: git spotted the rename and put them there, and the namespaces followed. Shell picks up ObjectStore and Import as a result, which the Android head then gets transitively and will use neither of at first — scoped storage means there is no ~/.ssh/config to import, and file transfer is out of its first scope. Desktop suites green at 155 and 64. |
||
|
jaap-jan
|
fe9d7fc289 |
Give DodoSSH a phone, and a shared shell for both heads to drive
The Android head from docs/android-port.md, taken as far as its step 6. Step 3, the spike, is answered and its throwaway screen is gone: libsodium.so and libe_sqlite3.so are both in the arm64 APK, so NSec resolves its native half on Android despite shipping no Android build, and the local cache opens. Two findings the audit could not have had: Avalonia.Controls.WebView only ships net10.0-android36.0, which settles the open "which Android versions" question at targetSdk 36; and Android has blocked cleartext HTTP since API 28, so the terminal renderer needs a network security config scoped to 127.0.0.1 or the WebView loads nothing. DodoSSH.Client.Shell is new and is why the phone can exist: the view models, the terminal renderer files and the palette moved there so both heads drive one state machine and draw from one set of tokens. The desktop head is otherwise untouched and its 144 tests still pass. The platform pieces behind interfaces that already existed: the profile directory from filesDir, a device key wrapped by a StrongBox-backed key that a fingerprint releases, and a foreground service so a shell outliving a vault lock stays true on a platform that stops backgrounded processes. Sign-in is deliberately absent rather than approximated. It needs an app link, because reusing the desktop loopback listener is the attack RFC 8252 section 8.3 names. |
||
|
jaap-jan
|
5cbda59a34 |
Merge branch 'main' into claude/host-management-ui-plan-7f20ab
Seven files needed a hand. Most were two branches adding something in the same place, but three were one branch changing what the other had moved or renamed, and those are the ones worth reading. The shell keeps both new fields and both constructor lines: the connection recorder this branch built and the teams view model main did. Where main put a teams load inside OnScreenChanged, it now sits beside the logs refresh rather than inside RaiseSurfaceState — this branch extracted that notification block and it is called from two properties, so a screen-specific side effect in there would fire on every terminal switch as well. Main gave four row types a vault id and a vault name, and this branch had moved one of them — KnownHostRowViewModel — into its own file when the pinned keys became a screen. Git resolved that as "deleted here, modified there" and took the delete, which compiles as long as nobody looks: the moved copy still had the two-argument constructor and the call site had grown to four. Carried over by hand, along with the ordering the pins list now does on them. The status line's quiet rule was the subtle one. Main extracted it into IsWorthReporting; this branch had changed the same condition to read item counts rather than raw ones, because every user action queues a log entry a moment later and this machine reads its own entries back on the next pull. Take main's structure and the merge builds, passes, and silently restores a bug this branch existed partly to fix — every save's message overwritten a second after it appears. The method now reads PulledItems and PushedItems, with the reason in its remarks. Two conflicts were prose that had gone stale rather than code. The keychain screen's comment said team vaults are refused by the server's access service, which was true when it was written and is not now; main's replacement stands, in this branch's vocabulary. The design-gaps row for groups was claimed by both — real host groups here, per-vault headings there — and they are different things, so both rows stay and the difference is stated: a group is a shelf the user chose, a vault is who can read the item. One defect the tests found and the compiler could not. Generating a key opens the same editor as pasting one, but not through NewKey — so it never set the target vault main added, and a generated key was filed into whatever vault was edited last, or none. Both key-generation tests failed on it. Fixed where the editor opens, with the reason recorded there. One gap is left deliberately and is written down rather than half-built. Hosts, keys, credentials and pins are read across every vault this session holds a key for; groups are read from the active vault alone, so a host a teammate filed shows under UNGROUPED. Nothing is lost or misfiled — it is what the sidebar already shows for a group that has been deleted — but closing it needs a vault id on every group row for rename and delete, and a way to tell two vaults' identically-named groups apart under a layout with one heading per group. Both are worth doing and neither is a merge's business. It is in the remarks on ReloadGroupsAsync and in docs/design-import-gaps.md. dotnet build, dotnet test and dotnet format --verify-no-changes are all clean: 1282 tests, including the end-to-end suite against real containers. |
||
|
jaap-jan
|
d07b336868 |
Free the terminal from the Hosts screen, and fill the room it left
The WebView sat inside the Hosts grid, so navigating to Files or the keychain hid every open terminal and the strip that named them. A connection you had opened was invisible from four of the five screens. The window now has two surfaces rather than one: a nav rail that says which page you are on, and a terminal strip that is always there and switches the whole content area to a shell. Screen keeps meaning "which page" and never becomes a sixth kind of page, which is why this is two properties instead of one enum with a terminal member in it. Every screen lives inside one wrapper panel that collapses when a terminal is showing. That is not tidiness — the WebView hosts a Win32 child window that composites above everything Avalonia draws, so a screen left visible over its rectangle is a screen sliced in half, and this window has shipped that defect once already. One decision point, IsTerminalShowing, and a nested panel rather than five compound bindings nobody would remember to extend. The focus choreography is the part no test in this repo can see. Every reveal path now focuses in the same turn the WebView appeared, so all three of them post at DispatcherPriority.Loaded and let the native control re-push its bounds first. Going the other way had a real bug: the screen-changed branch called a bare Focus() where it had to release the keyboard from the native child, so switching from a terminal to Files silently ate the first keystrokes. Rare before this commit and the primary gesture after it. The tab strip grew a cross inside each tab, a plus that opens the quick-connect palette, and middle-click close. Nested buttons are correct here: Avalonia handles a left press on the cross and deliberately does not handle other buttons, which is exactly what lets middle-click bubble up from the cross as well as the tab. The test is PointerUpdateKind rather than IsMiddleButtonPressed, because the latter reports button state and is also true for a left press made while the middle button happens to be held. The handler is on the tab and not the strip, so the background closes nothing by construction. Plus opens the palette rather than a flyout, since a menu dropping into the WebView's rectangle may or may not composite above a child HWND and this repo does not make rendering claims it has not photographed. Everything a user reads now says keychain. The wire, the database and the cryptographic spec still say vault, deliberately: renaming those is a migration and a protocol change for a word. That split is written down rather than left to be rediscovered as an inconsistency. Four things that were squeezed into the keychain's category rail, or into nothing at all, now have screens. Pinned host keys get one, with fingerprints never truncated and a filter that matches them, because comparing what you have against what the operator published is the whole workflow; the approved date is read out of the item's UUIDv7 rather than added as a column, and says so, since it means first approval and not last use. Keys can be generated in the client, which needed the openssh-key-v1 container written by hand — there is no BCL or NSec helper, and the PKCS#8 route is unverified in the SSH library this uses. The armour carries no passphrase: encrypting it needs bcrypt_pbkdf, which is Blowfish with a swizzle, in a project whose crypto is otherwise entirely libsodium, for a protection the key's own remarks argue is redundant inside a vault. Generation fills the existing editor and stops, so SAVE stays the one thing that writes. ~/.ssh/config can be imported behind a preview that is ticked per row and writes nothing until the button; IdentityFile records the path and imports the key material only on an explicit opt-in, because reading somebody's private key into a vault is precisely the act this product exists to make deliberate. Match blocks and ProxyJump are reported rather than obeyed — one cannot be evaluated statically and the other has nothing behind it to route with, and a preview that implied otherwise would be worse than one that admits it. Files can be dragged in all four directions that are honestly available. Remote to Explorer does not ship and is not pretended to: the shell wants the bytes during the drop, which needs a virtual file and a native COM data object, outside what Avalonia offers. Note for the next person that Avalonia 12 replaced the drag model outright — DataObject and DataFormats are no-op stubs and IDataObject is not in the reference assembly, so every tutorial written for 11 does not compile here. Hosts can be grouped, flat and never nested. A parent id merged as a scalar lets two offline clients each re-parent A under B and B under A, producing a cycle inside an encrypted payload that no server can police and every reader would have to detect for ever. Membership lives in that payload rather than in the one plaintext concession ADR 0001 allows, whose test is that the relay cannot function without it — nothing on the server reads a group, so what plaintext would hand over is a clustering of the estate for nothing. The plaintext column reserved for it is dropped, provably always null, and the server now refuses a client that sends one; it was never populated, was copied on apply, and was not cleared on delete, so a group id would have outlived the host it described. Snippets insert through xterm rather than through the pump, because xterm is the only thing that knows whether the remote has bracketed paste on, and that is what makes a shell treat embedded newlines as text instead of as execute. The host process moves opaque bytes and never parses output, so it would have to guess, and guessing wrong runs every line. Running is off by default and the copy says the text goes into whatever is there — the terminal has no notion of being at a prompt, and may be in vi or at a password prompt with echo off, so the Enter the user presses themselves is the entire safety property. Connections and keychain changes are recorded as synced encrypted items, which is what makes them auditable by a team later and costs the server knowledge of connection rate and timing from row counts alone. ADR 0001 already concedes it cannot hide that class of metadata; the trade is now written into it rather than left implicit. A connection entry is written once, at close, which is what makes a synced log tractable: nothing to merge, one outbox row, no chance of colliding with itself. Live sessions come from memory, not from the log. The write is void by contract and posts to a bounded channel, because putting an encrypt-and-write on the teardown path of every session is how closing the application comes to take four seconds. A ticket opened before a lock still closes afterwards, since a shell outlives the vault. The activity log hooks the one generic repository every kind writes through, so it cannot miss a caller — which is also why the log kinds themselves declare they are not audited, or the first entry would write an entry about writing an entry. It records the names of the fields that changed and never their values; a log with an old password in it would be a plaintext credential store with no vault around it. Retention is 90 days or 5,000 entries, whichever bites first, pruned on the sync loop rather than on a second timer. That log traffic then broke the status line, which is worth recording because the fix is a shape and not a patch: background sync counted its own log rows as pushed items, so the quiet rule stopped being quiet and every action's message was overwritten a second later by a sync report. The report now separates log rows from user items and the rule reads the latter. S3 buckets appear as a remote in the file browser, behind the same interface an SFTP session implements, so the queue and both panes did not have to learn what they are talking to. Uploads go through a pipe, because the queue wants to write and the SDK wants to read; memory is then bounded by the part size instead of buffering a file to disk twice. Finally, the Windows device key store moved out of the session project, which was the one thing keeping it from being portable — everything else in it is platform-neutral, and a Windows CNG dependency in the middle of the vault code meant a second head could not reference it without dragging Windows along. The seam that made the move free was already there. docs/android-port.md is the audit behind that: what ports, what does not, in order of cost, the four decisions taken, and an inventory of every screen and state the interface has to carry, written so a design can be made from it directly. dotnet build, dotnet test and dotnet format --verify-no-changes are all clean: 1240 tests at zero warnings, including the end-to-end suite against real containers. The manual checks that headless Avalonia cannot make — the drag from Explorer, a generated key against a real host, twelve tabs at the minimum window width — are listed in docs/manual-checks.md and are still outstanding. |
||
|
jaap-jan
|
23eca3a21b |
Merge branch 'main' into claude/m3-implementation-57f9d7
ci / build and test (push) Failing after 2s
Three files conflicted, and two of the resolutions are more than a choice of side. QuickConnectTests had both branches fixing the same build break — main's M2 merge left the shell's constructor with an ISftpSessionFactory nobody passed. Main's version wins because it carries a comment saying why the palette never needs a session. VaultSession's conflict is adjacent edits: main added the remembered sign-in members and this branch changed SyncAsync's summary from "the active vault" to "one vault". Both kept. VaultViewModel is the one that matters. Main taught the background pass to report a sync that had to start over, on the grounds that a machine which silently re-read a whole vault has had something happen to it; this branch turned a pass into one report per readable vault. Taking either side alone would have lost the other, so ResyncedFromStart is now one of the conditions IsWorthReporting checks, per vault. Merging also broke something neither branch could have caught alone, and the build would not have said a word. SyncOnceAsync cleared LastSyncFailed unconditionally, which was right while a pass was one vault and a failure was an exception that never reached that line. A failure is now a report — one unreachable team vault must not stop the others syncing — so the flag was being cleared over a vault that had just failed, lighting the titlebar SYNCED. It is computed from the report instead, in the one place both callers go through, so the manual command gets it as well as the loop. The background pass still swallows the message and keeps the fact, which is what AnAutomaticPassThatFails_LeavesTheStatusAlone is there to hold it to. Two comments the auto-merge left describing a world with one vault in it: the SCOPES rail's, which said team vaults are refused by the access service, and the host sidebar's "One heading, for one vault". |
||
|
jaap-jan
|
95816de0c5 |
Share a vault with a team, without the server holding a key
M3's teams, sharing and ACLs. Teams with roles, a public-key directory, the append-only key log served for clients to check it against, team-owned vaults, and vault key grants wrapped by a client and stored opaquely by the server. VaultAccessService resolves team membership to PermissionFlags, so a viewer may pull and may not push; the desktop client reads and syncs every vault it holds a key for, and a real TEAMS screen replaces the one that said it did not exist. No migration: team, team_membership, vault.team_id and vault_key_grant have all been there since the first one, which is what carrying two unused tables bought. Membership is authorisation. A grant is access. The obvious model is one concept — "access", with a role attached, handed out by the server — and this architecture cannot implement it: a vault key is sealed to each member's X25519 key, and only a client holding the plaintext can seal it for somebody else. So "give Bob access" decomposes into a database write and a wrap, which happen on different machines. Adding a member makes the server serve them the vault; it cannot make it readable. VaultSummary.WrappedVaultKey is null in the meantime and the vault appears in their list saying it is waiting for a key, because hiding it until a grant existed would have been tidier and would have implied the server was the thing granting access. The screen says the same thing after every add, in the status line. ADR 0009 records the whole decision. Sharing verifies or refuses. A directory lookup is a claim by the server about a third party's public key, and wrapping to an unverified claim hands the vault to whoever made it — no amount of transport security helps, because the server is inside the threat model. KeyLogAudit reads the whole log, recomputes every entry's hash from its own contents, checks the chain from genesis, and refuses unless the offered key appears in it unchanged. There is no override flag: one that exists gets used on the day the log is briefly unreachable, and the resulting grant is indistinguishable from a correct one afterwards. What it still cannot promise is that the key is the right person's, so the fingerprint comes back for an out-of-band comparison and the success message says so every time. A test corrupts the fake server's log by one byte and watches the client refuse rather than warn. The roles are only the ones that are enforceable. There is no ConnectOnly, despite the design asking for one and TeamRole having room: SSH terminates on the client, so a session needs the credential's plaintext on that machine, and "may connect but may not read the key" cannot be enforced here. Shipping it as an option in a dropdown would have been a lie. Connect rides along with Read and is documented as an interface hint. Removal is named for what it does — it revokes grants and flags the vault for rekey, and claims nothing about what is already on somebody's laptop. Three things are deliberately absent, and each is a refusal rather than an omission. The rekey itself, because re-wrapping every item's data key under a new vault key needs a client holding the current one; the server records that a rotation is owed and the interface reports it, which is more honest than a button that only appears to do it. Ownership transfer, because allowing an owner to be removed without one leaves a team nobody can administer. And cross-vault host key trust: a pin in a team vault is listed but not consulted at connect time, because any member with Write could otherwise pre-approve a fingerprint another member's client then trusts silently for a host in their own vault. Scoping trust properly needs a scope on the SSH connect path, which IKnownHostStore has not got; until then the narrow direction is the safe one and the cost is in the README rather than hidden. Reading now spans vaults and writing still does not. Every list on the vault and hosts screens covers each vault the keyring opened, rows carry the vault they came from, and an edit goes back to that vault rather than to the active one — writing it to the active vault would fork the item and only show up when a colleague wondered why their change never arrived. A new item goes wherever a picker says, defaulting to the personal vault and never moving on its own, because an item filed into a team's vault is visible to that team and moving it back means deleting and retyping. The sidebar heading stops naming one vault once there are two, and each row names its own. The server checks what it can and nothing it cannot. It will not record a grant for a key its recipient no longer holds, for a superseded generation, or for somebody who is not in the team — each of those would otherwise surface days later at the far end as a tag failure indistinguishable from corruption. It does not verify the wrap or the signature, and the grant service says so: that would be a convenience and never the boundary, and would put an asymmetric implementation on a machine that is supposed to hold no keys. Two bugs the tests found. TeamsViewModel's busy gate blocked its own reload, so a team created a moment earlier was missing from the list it had just been added to. And syncing every vault turned a failure from an exception into a report, which made a background pass announce an unreachable vault once a minute — the exact behaviour AnAutomaticPassThatFails_LeavesTheStatusAlone exists to prevent. The fact is recorded and the message swallowed, as it was before; pressing Sync still names the vault and the reason. Also fixes a build break this branch started with: QuickConnectTests was never updated when M2 added ISftpSessionFactory to the shell's constructor, so nothing built at all. |
||
|
jaap-jan
|
91438fb382 |
Ask before deleting, and connect a host by double-clicking it
DELETE on a host, an SSH key, a stored password or a file on the host now puts a question where the button was, and only answering it deletes anything. It is a state rather than a dialog, which is the arrangement signing out already had and for the same reason: this is the moment that has to be able to say what is about to go before it goes. What the question says is counted rather than generic, because a confirmation that only asks whether you are sure is a click to train people out of. A key names the hosts that authenticate with it and says they will refuse to connect afterwards rather than falling back to a typed password, which is what the connect path actually does. A host discloses a terminal open on it, because deleting the host does not close the session. Every vault deletion says how far it travels and whether this machine can push the tombstone yet or is queuing it. Deleting on the host carries the strongest warning of the four on purpose: everything else here is a tombstone against a copy the server still holds, and a file on somebody's machine is bytes with nothing behind them — so that one names the full path, since a bare name identifies nothing. The armed request carries the item's entity id, so nothing that moves the selection between the question and the answer can redirect it, and answering about something that has since gone says so instead of doing nothing quietly. Disarming compares ids rather than rows, which is the subtle half: a reload replaces every row object, so the naive rule would have let the pass that runs every minute take the card away from somebody halfway through reading it. Forgetting a pinned host key is deliberately still unguarded. It costs one fingerprint check on the next connection and it is the safe direction to be wrong in — the dangerous button there is the one that adds trust, and that one is already a prompt at connect time. Discarding a stopped transfer is likewise unguarded: it removes a resumable part file and leaves the source alone. Double-clicking a host in the sidebar connects to it, wired as a gesture in the control exactly as the transfers screen opens a directory. CONNECT stays, since it is the button with the password box beside it. Ten existing delete call sites now go through arm-and-confirm helpers, and eight new flow tests cover asking first, cancelling, the counted warning, disarming on a selection change and on an editor opening, surviving a sync, and the stale-item guard. Three layout tests measure the new shapes — the sidebar card is the one card in the application a user cannot scroll — and one of them also asserts the card renders its text, because a card whose compiled bindings did not resolve would lay out perfectly as empty rows. The double-click test performs the real gesture and proves it reached the connect command through a refusal that never touches a network. dotnet build, dotnet test and dotnet format --verify-no-changes are all clean: 853 tests, including the end-to-end suite against real containers. |
||
|
jaap-jan
|
240aadb746 |
Merge branch 'main' into claude/vault-unlock-logout-autosync-a84c35
ci / build and test (push) Failing after 3s
Four files needed a hand, and all four were two branches adding something in the same place rather than either changing what the other did. The shell's constructor now takes both new parameters: main's SFTP session factory, which it must have because it builds the transfers view model, and this branch's optional resume handler, which stays last so every existing test that constructs a shell without one still gets a shell that can only be online because somebody signed in during this run. App.axaml.cs, ShellFlowTests and QuickConnectTests pass the pair; the layout suite keeps both of its new fields. Signing out now detaches the transfers screen exactly as locking does, and the confirmation says that an open transfer session survives it. That is the same policy both sides already argue for their own case: signing out destroys this machine's copy of the vault, not work that authenticated before it. QuickConnectTests did not compile on main — the SFTP commit added a constructor parameter and the quick-connect suite, merged from a parallel branch just before it, was still calling the old one. Fixed here rather than worked around, since the merged tree has to build. dotnet build, dotnet test and dotnet format --verify-no-changes are all clean: 980 tests, including the end-to-end suite against real containers. |
||
|
jaap-jan
|
0b261c4d39 |
Stay signed in, come back online by itself, and let a machine be given up
Three things a machine that has been set up could not do. Unlock now takes Enter, which is the gesture everybody makes after typing a password and which did nothing until they found the button. Signing in survives a relaunch. The refresh token is kept in the local cache, sealed under the vault's own cache key, so a later launch resumes the session through the refresh grant with no browser and nobody present — and because it is sealed under that key, only an unlocked vault can resume it. A locked client therefore cannot reach the server at all, which is a consequence worth stating rather than working around; docs/crypto.md §3.2 records it. Every sync pass asks the shell for a connection rather than reading one captured at unlock, so a laptop that unlocked on a train is online within a minute of finding a network, with nothing pressed. Unlocking itself still never waits on a socket. Signing out empties this machine: the profile, the cached items, the outbox and this machine's device key, with the account's row withdrawn when the server can be reached. It asks first and says what it costs — the outbox count when the vault is open, an admission that it cannot be counted when it is not, and the shells that keep running either way. The vault is on the server and is untouched, which is what makes the same button the only honest answer to a forgotten passphrase, so it is on the unlock screen as well as in preferences. It cannot end the session at the identity provider, and says so. Two defects surfaced on the way. The synchronisation pass that runs when the vault opens never ran at all: the loop is started from inside the unlock command, so the busy flag it yields to was raised by that command — the first sync was a minute late on every launch. And signing in from preferences while unlocked threw an unlock screen over an open vault whose keys were still in memory. The unlock card and the new confirmation live in their own controls because MainWindow cannot be laid out headless, so markup left inside it is markup no test can measure; both are now measured at the window's minimum size in the shapes that grow. What is still unverified is the composed window itself. |
||
|
jaap-jan
|
04faef6597 |
Move files to and from a host over SFTP
M2's file transfer, built bottom-up: an SFTP session on the SSH layer, a transfer queue in a project of its own, and the two-pane browser the design asked for replacing the screen that said it did not exist. Remote listings carry names, sizes, modification times and a real drwxr-xr-x — nothing in this repository could render a POSIX mode before — and the queue moves one file at a time with progress, throughput and resume. The design import assumed this would be an SFTP subsystem channel on ISshConnection, beside the shell on a transport that is already up. SSH.NET does not offer that: SftpClient derives from BaseClient and owns its own transport, and there is no supported way to hand it an SshClient's session. So file transfer opens a second authenticated connection, and it is named for that rather than dressed up as a channel — OpenSftpAsync is on ISftpSessionFactory, not on a connection. The difference is visible to a user: the host records a second login, and a host whose password is typed each time asks for it again on this screen. It goes through the same host key gate, the same pin and the same two refusals a shell does, so a fingerprint approved for a terminal is approved here and one approved here reaches the other machines with the next sync. docs/design-import-gaps.md is corrected, and marked as the one row where what shipped differs from what it predicted. Nothing is written at its final name until it is complete. Every transfer goes to a .dodossh-part file beside its destination and is renamed into place at the end, so an interrupted transfer can never be mistaken for a finished one — which matters most for what this screen is actually for, which is copying a build artefact onto a server and then running it. A destination that already exists is refused outright rather than overwritten: the queue has no way to ask, and silently replacing a file somebody's process is serving is the worse of the two failures. The remote pane has DELETE and MKDIR so that refusal is not a dead end. A test against the container pins the assumption underneath all of this — that SFTP's rename does not clobber. Resume works within a run of the application and not across a restart, and the limit is deliberate rather than unfinished. Nothing records which source wrote a part file, and resuming one on the strength of its name matching is how a corrupt artefact gets delivered with nothing reporting a failure; a part file found at startup is started over. Making it survive a restart needs the preferences store this client still has not got. The offset a resume starts at is the part file's own length rather than the transfer's recorded progress: a cancellation can land between a write completing and the counter moving, and only one of those two is a fact about the bytes that are there. The queue and its connection outlive a lock, as shells do. LockAsync already argues that locking must not destroy work in flight — it is what somebody does when they walk away from the machine, which is exactly when a long transfer is most likely to be running — so TransfersViewModel is created once and the vault is attached on unlock and detached on lock. What locking takes is the host list, and it has to: those rows carry decrypted secrets. DodoSSH.Client.Transfer is a new project rather than more of Client.Ssh. The two answer different questions — one is about reaching a host, the other about moving bytes and what to do when moving them stops halfway — and this is the only client project that deliberately touches the local filesystem. Three defects the tests found, none of which review would have. SftpPath.Name answered an empty string for the root. NavigateRemoteAsync wrapped itself in the busy guard, so navigating from inside another command did nothing at all and the remote pane simply stayed empty after connecting, with no failure anywhere to explain it. And opening an SFTP session per test made two handshakes per test — this client learns a host key by being refused — which pushed the SSH assembly past sshd's MaxStartups and failed a different few unrelated tests each run; the session is shared through the fixture now, with the reason written where the next person will hit it. 1004 tests green across 18 projects, 24 of them new: the SFTP subsystem against the OpenSSH container, the queue against a real temporary directory and a fake host, and three more layout measurements because a screen this window has never laid out is a screen never checked. Not verified: the screen has not been looked at running. The layout harness measures it at the window's minimum in three shapes, which is the class of defect that has shipped here before, but reaching it in the application needs the compose stack, the migrations, the API and a browser sign-in. What is still absent — the status bar's transfer count, dragging between the panes, transferring a directory, and sftp over a bastion — is in docs/design-import-gaps.md. |
||
|
jaap-jan
|
94e11f5e38 | update packages | ||
|
jaap-jan
|
9a76eced14 |
Give hosts and terminals their own screen, and the rest of the vault another
Rebuilds the client's shell from an imported design: a titlebar and nav rail it draws itself, real multi-session tabs over the one WebView, a Ctrl+K host search, and a vault screen that merges keys, passwords and pinned host keys into one table. Hosts left the vault column for their own screen beside the terminal, which is what the design asks for and turned out to be the better split anyway. Two screens the design shows have nothing behind them yet — file transfer and teams — and say so plainly rather than rendering invented data; every other gap between the design and this build is recorded in docs/design-import-gaps.md. |
||
|
jaap-jan
|
d162271a45 |
Show the host keys this vault has approved
Trust was created by the connect prompt and withdrawn from one host's editor, so a pin for a host that had since been deleted or re-addressed was unreachable from the interface entirely. It went on refusing connections and nothing in the application would admit it was there. Two of the four recorded debts were really this one: leftover pins, and no list to see them in. A fourth section in the vault column, and the first that adding one has been cheap for — three edits and two layout tests, which is what #8 and #9 were for. No editor and no Add, which makes it the only section with neither. A pin is not something anybody writes: it appears when somebody approves a fingerprint at the moment of connecting, which is the one place a person can actually check it against what the operator published. A form for typing one in would be a form for pasting whatever a man in the middle just offered. So the section exists to show and to withdraw, which is exactly what was missing. The fingerprint is shown in full, wrapped, in a monospace line. The only thing anybody does with one is compare it against a fingerprint an operator published, and half of one cannot be compared — it can only be glanced at, which is the habit pinning exists to replace. Nothing here is secret; a host key fingerprint is published on purpose. A pin no host in this vault dials is badged rather than hidden or deleted. That is the leftover the debt was about, and keeping it is still right: the address may be reached by something without a bookmark, and trust is about the endpoint rather than the bookmark. The badge is a hint and not a verdict, which is why nothing acts on it. Matched case-insensitively, because a host name is, and because a list that called DB.internal unused next to a host saved as db.internal would be inviting somebody to delete trust they rely on. Forgetting goes through the same ForgetAsync as the host editor's button, which withdraws every pin for the address rather than the selected row. Deliberate: somebody who has stopped trusting a machine has not decided to keep trusting one of its keys, and a second pin under another algorithm would go on being offered at the next handshake — which reads as a withdrawal that did not work. The status line says how many went, and the change is pushed immediately, because the other machines are the ones still refusing to connect to a rebuilt server. The list is read through the repository rather than through VaultKnownHostStore, whose snapshot is shaped for the SSH handshake: one pin per endpoint, deduplicated, no entity ids. This list has to show duplicates, because a duplicate is one of the things worth seeing. Two mutations, both caught: calling every pin dialled (3 tests), and defaulting the selection to the first row (1) — the same hazard as the credential list, since Forget acts on the selection. The selector now holds four buttons in 340 pixels, and TheSelectorIsBigEnoughToClick measures how much of that they use rather than leaving a fifth section to discover it as "a button falls outside the window". 936 tests green across 16 projects, 6 of them new. Zero warnings, format clean. Not verified: how the section looks. It joins the list in outstanding item #7. |
||
|
jaap-jan
|
f86791e817 |
Finish revoking a device, instead of half of it
ForgetDeviceAsync stopped this machine unlocking without a passphrase and left
the server's row exactly where it was, so the account went on listing a device
nobody could account for. ADR 0007 recorded that as a deliberate gap needing an
endpoint. This is the endpoint, and the two things that turned up behind it.
DELETE /api/v1/me/devices/{id}. The device row is not the dangerous half: a
kind=device wrap is the user's identity bundle sealed to a key somebody may be
holding, and that is what has to go. It goes on the foreign key's cascade rather
than a second statement, and RevokeDevice_TakesItsWrapWithIt asserts the cascade
rather than trusting the configuration to keep saying so.
Scoped to the caller's own account, which is the only authorisation check there
is. The id is an unguessable v7 GUID, but unguessable is not a permission —
without the scope one user could withdraw another's device key by pasting an id
they saw once, and the victim's next launch would ask for a passphrase with no
explanation. 404 rather than 403 for somebody else's device, so a stranger does
not learn the id exists.
Never refused for being the last device. ADR 0001 makes an enrolled device a
recovery path, so removing the last one does cost the user something — but the
machine being revoked is most likely the one they have just lost, and a server
that argued about it would be refusing the one request that has to work
immediately. The passphrase wrap is untouched either way, which
RevokeDevice_LeavesThePassphraseWrapAlone pins.
--- Two things found on the way ---
Registering twice from one machine left two devices on the account. The server
is idempotent on the public key, but the client generates a fresh key pair every
call and the keystore holds one — so the second registration orphaned a wrap
whose private half had just been overwritten, which is precisely the leftover
this change exists to remove. Registering now withdraws the previous device.
Found by a test that asserted the property and failed.
And the fakes were lying about it. FakeAccountServer's comment claimed the real
service's idempotence while handing back a fresh Guid on every call, which is
invisible until something revokes by id — at which point a test would be
revoking an id the server never issued, and passing. Both fakes now issue one id
per public key and drop the wrap with the device, as the cascade does.
--- Reachable at all ---
ForgetDeviceAsync had exactly one caller and it was a test, so "Stop unlocking
here" now sits in the account bar where "Use Windows Hello here" was. Its own
flag rather than the negation of that one: a machine with no TPM and a machine
that is already registered are both "cannot register", and only the second has
anything to take back.
No confirmation prompt, deliberately. The cost of pressing it by accident is one
passphrase and one re-registration; the cost of a dialog is a moment's
hesitation at the point somebody has realised a machine is in the wrong hands.
Offline it does the local half and says so rather than refusing. Whether this
machine may unlock itself is decided entirely by the local cache and the local
keystore — the unlock path never asks the server — so forgetting here is what
actually revokes, and "you are offline, so this machine will go on unlocking
itself" would be the worst available answer. DeviceRevocation.LocalOnly is what
the interface reports and the status line explains what is left to do.
The local half runs first for the same reason, and the keystore call is the
first thing in the method that can yield: on Windows it raises a consent dialog,
and a dialog wants the thread it was called from. That ordering is currently
load-bearing and shakier than it looks — see the open device-unlock hang.
Four mutations, all caught: dropping the user scope from the server query
(1 test), skipping the stale-device revoke on re-registration (2), skipping the
server call in ForgetDeviceAsync (2), and the earlier version of the client that
never called it at all.
930 tests green across 16 projects, 13 of them new. Zero warnings, format clean.
|
||
|
jaap-jan
|
da7462e41f |
Show one kind of vault item at a time, and let the vault hold passwords
Outstanding items #8 and #9, in one commit rather than two. They are separable as work and were built in that order, but not as a diff: the section enum has three members, the one-editor guard has three arms, and the picker offers keys and credentials from the same list. Reconstructing an #8-only state would mean hand-writing an intermediate version of VaultViewModel that never existed and that no test has ever run. One honest commit beats two invented ones. --- #8, the type selector --- The column showed two lists and two editors stacked in 340 pixels, and only just: the key list needed a MaxHeight and had to hide itself whenever its editor opened, both to stop the host list above it pushing the buttons off the bottom edge. Credentials would not have fitted at all. It now shows one kind at a time, chosen by a selector at the top, and both workarounds are gone because a section owns the whole column. Three departures from the plan, each with a reason found while building it. The selector is plain Buttons and a parameterised command, not a TabControl, a TabStrip or a ListBox. All three of those hold the selection themselves, so a click moves the highlight before the view model can refuse it — and this column does refuse, while an editor is open. A selector lit on a section the column is not showing is worse than the refusal it would be hiding. Buttons carry no state and cannot disagree with the vault. The one-editor-at-a-time rule survives with its justification replaced. That rule was a workaround for the sizing problem above, and sections dissolved it: the editors are in different sections and only one section is ever laid out. BothEditorsAtOnce_DoNotFit_WhichIsWhyTheRuleExists is now BothEditorsOpen_NowFit_BecauseOnlyOneSectionIsLaidOut — the same test, inverted, because its own comment said that if it ever started passing the rule had become unnecessary. It has. The rule stays for a better reason: an open key editor holds a pasted private key in a bound string, and letting the column move on would leave key material in a form nobody can see, with nothing on screen to say it is there. A sizing hack became a rule about not hiding a secret from the person holding it. KeyEditorIsInTheWay and HostEditorIsInTheWay are one AnEditorIsInTheWay, called by the section switch and by every editor-opening command. And releasing the keyboard from the terminal has never worked. MainWindow takes Win32 focus off the WebView's child window and then calls Focus() on VaultColumn.KeyboardTarget — and a ListBox is not focusable by default in Avalonia, which leaves focus to its items. So the call returned false, the window ended up with nothing focused, and the keystrokes went nowhere: exactly the state that method's own comment says its second half exists to prevent. Found by writing the test to assert focus was taken rather than that the right control was named — the cheap assertion was already passing. Fixed with Focusable="True" on every list. --- #9, credentials --- Credentials have synced since they were added and could not be created. They can now, and the sync layer needed no change at all: fourth item type, same result, which is the item-kind seam working as intended. One picker for all three ways a host authenticates, which is what makes the illegal combination unrepresentable rather than merely invalid. SshKeyChoice became AuthenticationChoice carrying an AuthenticationKind, and BuildHost reads both SshKeyId and CredentialId off that single selection, so a host naming a key and a credential — which HostSecret.TryValidate refuses — cannot be expressed. Two pickers would have expressed it and then rejected it at save time. The kind travels with the id in three places and none is padding: Missing takes it, the placeholder lookup matches on kind as well as id, and Bound(kind) returns null unless the selection is that kind. Drop any one and a dangling credential comes back as a dangling key, which saves as a key binding to an id no key has. A credential's username had to reach the SSH request, not just its password. TryBuildCredential returned only the secret and the connect path read the username off the host, so a stored credential would have gone out under the wrong account — wrong in a way a server only reports as "authentication failed". It is now TryBuildAuthentication returning a (Username, Credential) pair. The no-username refusal moved, and had to. It ran before anything looked at the binding, which made a credential's username unreachable in the one case it is most useful: a host somebody never filled a username in for. It is now the last thing every branch agrees on, so such a host is perfectly usable through a credential that carries one, and a host with neither still refuses and now says where to put one. --- What the measurements cost --- Ten mutations, all caught. Two are worth naming. Removing a section's IsVisible is caught by OnlyOneSectionIsOnScreenAtOnce and by nothing else: two visible sections overlap in the row they share rather than clip, so every fit test still passes while the column shows one list through another. Defaulting the credential selection to the first row is caught by ReloadingKeepsACredentialSelectionButNeverInventsOne, and the property is a safety one rather than tidiness — Delete acts on the selection, so a list that picked a row on every background sync would aim a one-click password deletion at something nobody chose. The key list has the same property, and its comment cited a method that has not existed for some time; both now name the delete command they actually protect. One test of mine could not fail, and the mutation pass is what found it. AHostBoundToACredential_SendsItsPasswordAndItsUsername gave the credential and the host the same username, so it passed whichever one the code read. An override is only tested when the two values differ. Two shipped statements went false and were corrected rather than left: the class remark saying passwords were "not yet" in the vault, and the terminal column's "Keys are in the vault; passwords are not yet." That column's hint is now a tooltip on the password box rather than a sentence in the row, which was measured the hard way — by looking. At the window's 820px minimum the column gets 480, and a 220px box plus Connect plus any sentence does not fit; the row has shipped clipped for as long as it has had a hint in it. That strip is the one part of the window nothing can measure, because MainWindow cannot be laid out headlessly at all. Extracting it into its own control, as the vault column was extracted for exactly this reason, is what would fix that, and is not done here. 911 tests green, 30 of them new. Zero warnings, dotnet format clean. Seen by a person, which is how the two defects above were found. Still open from that pass: unlocking with the device key raises its consent dialog and then never returns, while registering one works — the difference is which thread the CNG call lands on, and diagnosing it properly is its own change. |
||
|
jaap-jan
|
573f5d5668 |
Keep the device key in the TPM, behind a consent Windows enforces
The last of ADR 0007's three pieces, and it does not implement what that ADR originally decided — because writing it exposed a flaw in the decision. The ADR said "a Windows Hello gesture gating a protected blob". That does not deliver what the rest of the document claims for it: a gate inside the process is not a gate. A store that showed a prompt and then read a DPAPI blob would be bypassed by malware that skipped the prompt, read the file and called CryptUnprotectData itself — which is exactly the attacker the whole decision was made against, and exactly the reason DPAPI alone was rejected. The presence requirement has to be a condition of using the key, enforced below the application, or it is decoration. So the device key is encrypted to an RSA key created in the Microsoft Platform Crypto Provider — the TPM — under CngUIProtectionLevels.ProtectKey. Windows requires consent to use that key, so the prompt is not something this code can be talked out of showing. Malware can ask for the key; it cannot answer the dialog. That is strictly stronger than the ADR described, and most of what option D was being saved for: the wrapping key genuinely never leaves hardware. The X25519 device key still lands in memory to open the wrap, because DSH1 fixes that wrap at a curve the TPM cannot do — the remaining gap, and now a smaller step than it was. CngKey is in-box, so this needed no WinRT projection and no Windows target framework. Which is worth stating plainly because the opposite was planned: the piece was scoped as "where the Windows TFM lands", and it turned out a platform guard on one class was enough. Client.App and its two test projects stay on net10.0. Two things were measured on real hardware rather than assumed, and the second changed the shape of the work. The platform provider works here and holds an RSA key — confirmed by creating and deleting one before writing anything that depended on it. And ProtectKey prompts at key *creation*, not only at use. The comment in the first draft of this file said the opposite, with a confident explanation: sealing uses only the public half, so it should be silent. It is not. CngKey.Create blocks on a dialog, because the policy means "protect this key with a PIN" and Windows asks the user to set that up there and then. Found by writing tests around save and forget and watching the suite hang for ten minutes waiting for somebody to type one. That has two consequences worth knowing before touching this file. SaveAsync is user-facing code — it belongs on a UI thread, behind a button somebody pressed, never on a background pass. And almost nothing in the store can be covered automatically: two tests remain, availability and the empty-blob case, both of which provably reach no dialog. Disabling the UI policy to make the rest testable would remove the one property worth having. The interface offers two things and hides both where they cannot work. "Use Windows Hello" appears on the unlock screen only when this machine has a cached wrap and a keystore still willing to release the key; "Use Windows Hello here" appears in the account bar only when the machine can keep a key and has not already registered one, so it is spent once used. Absent rather than disabled, in both cases: a greyed-out button on a machine that never had a TPM reads as something broken, and the passphrase box beside it is not a fallback — it is the ordinary way in. Both unlock paths now share AdoptAsync rather than each opening the known-host store, building the vault and starting auto-sync. The ordering in there is load-bearing and a second copy would be a second chance to get it wrong. The shell's tests drive a fake keystore. Not for speed: the real one prompts on every save and load, so a suite using it would block forever. What the shell has to get right is which buttons appear and what happens when one is pressed, and a fake answers exactly that. It is shared from Client.Session.Tests by source link rather than reimplemented. 882 tests green, 6 of them new. Zero warnings, dotnet format clean. Not verified, and not verifiable here: the dialogs. Whether the consent prompt appears at the right moments, reads sensibly, and returns to a usable window when declined needs the application run by a person on a machine with a TPM. That is the remaining half of outstanding item #7, and it is now the only thing between this feature and being finished. |
||
|
jaap-jan
|
db4a8ed3d3 |
Let an already-enrolled account register a device key
The first of the three pieces ADR 0007 needs, and the one that was a discovery rather than a plan. EnrollmentService.AddDevice runs only during enrollment, so without an endpoint the device-unlock feature would have reached accounts created after it shipped and no others — which is to say none of the ones that exist. The code even said so: "the devices endpoint sets it properly when it lands." POST /api/v1/me/devices takes a name, an X25519 public key and the bundle sealed to it, and writes a device row plus a UserKeyWrapKind.Device wrap. Possession is proved by construction, so there is no challenge. The wrap is the secret bundle sealed to the supplied public key, and only something that has opened that bundle can produce it. A caller who seals the wrong bytes registers a device that cannot unlock, which harms nobody else; the server cannot tell the difference and must not pretend to, because it holds no key that opens either. That is also why the client must be unlocked to call this at all. It is the one endpoint in the /me group that requires enrollment, and it says so itself rather than relying on the group. The group deliberately does not: GET / and POST /enrollment are how a client discovers it needs to enroll and then does so, and gating those on enrollment would make enrollment unreachable. Adding the stricter policy to this route alone means an unenrolled caller is told "enrollment-required" by the authorization handler rather than getting a 400 about the shape of a request that was fine. Idempotent on the public key, and 200 rather than 201 for the reason enrollment gives: a retry of an identical request returns the same body, so there is no single moment of creation to point a Location header at. A second row for one key would mean a device list with a duplicate in it and two wraps to revoke instead of one. Mutation tested — removing the lookup fails RegisterDevice_TwiceWithTheSameKey_ReturnsTheSameDeviceAndAddsNoSecondWrap and nothing else. That test also found a real defect, in the way these usually surface: two timestamps that print identically and are not equal. TimeProvider reports 100-nanosecond ticks and PostgreSQL's timestamp with time zone keeps microseconds, so the first call returned a value that no later read of the row would ever produce, and the idempotent retry answered with a different timestamp for the same device. Nothing breaks, which is what makes it worth fixing: the service now truncates to the precision the column actually holds, so the response is the same value every time it is asked for. The repo already had a precedent for this class of thing in KeyLogChain.TruncateTimestamp; it just had not been applied here. The platform is deliberately not carried on the wire, which leaves Device.Platform unreported and the stale comment corrected rather than fulfilled. It would be a display-only field, and a Contracts enum mirroring the domain's DevicePlatform is exactly the shape of duplication that has produced three self-consistent bugs in this repository. A device list that wants it can add a mapping table and a test pinning the two together, which is what the sync entity types already do. Its own problem code and exception rather than reusing enrollment's, whose rules it largely shares. Registering a device is not enrolling, and a client showing "your enrollment was rejected" because somebody set up a fingerprint reader would be describing the wrong thing. The validation shares the limit constants — MaximumWrapBytes, MaximumDeviceNameLength, PublicKeySize — and not the four-line guards, which would have had to be parameterised over which exception to throw for less than they cost. Both in-memory fakes implement it properly rather than throwing: they record the wrap so a test can assert it arrived, and refuse before enrollment as the real endpoint's policy does. A fake that answered where the server refuses is a fake that can make a real bug pass. 866 tests green, 8 of them new. Zero warnings, dotnet format clean. Still to come: the protector seam with the wrap cached locally so device unlock works offline, then the Windows Hello implementation and the unlock-screen UI — which is where the Windows target framework lands and where automated testing stops. |
||
|
jaap-jan
|
211eba0666 |
Keep host key trust in the vault, and make it withdrawable
A fingerprint approved once is now approved on every machine and survives a
restart, because host key trust is a vault item type rather than a dictionary
that dies with the process. InMemoryKnownHostStore was what shipped, so the user
was asked to verify a fingerprint on every single connection — which is the gap
most likely to train somebody to click through the one warning that actually
matters. A warning that appears when nothing is wrong teaches that nothing is
ever wrong.
The fourth item type, and like the third it cost no sync logic: a row, an EF
configuration, a migration, a server kind; a secret, a codec, a merge, a cipher,
a repository facade and a session property. One row in the client registry. The
reconciler, the mirror, the repository, the outbox and the pull filter were not
touched. SyncEntityType.KnownHostKey and AadResourceType.KnownHostKey were
already reserved, so neither the contract nor docs/crypto.md changed.
One item per (host, port, algorithm), because a server legitimately offers
several host keys and which one gets negotiated is not ours to predict. Pinning
per endpoint would make an algorithm change indistinguishable from an attack.
The label is derived rather than stored, which is the one place this type
departs from the other three. A user never names a pin — there is nothing to
name it after but the three fields it already has — and a stored label is a
second copy of data that can disagree with the first after a merge. Relabel
returns the secret unchanged, and says why.
The store answers the handshake without touching the disk. SshNetConnectionFactory
calls FindAsync from inside SSH.NET's synchronous HostKeyReceived event, over
.GetAwaiter().GetResult(), which cannot be avoided; doing SQLite I/O plus an AEAD
open per lookup there would put the handshake behind the cache. So decryption
happens in OpenAsync and RefreshAsync — on unlock and after each sync pass,
exactly where the host and key lists already reload — and FindAsync is a
dictionary read under a lock with no await inside it.
That snapshot is where the one real bug in this change lived. Install originally
merged the live pins over the freshly loaded snapshot, to protect a TrustAsync
that had landed while the read was in flight. It would also have resurrected
every pin the user had just forgotten, and stopped a withdrawal made on another
machine from ever taking effect — the store would have healed the deletion back
into existence on every refresh. Replacing wholesale and discarding the read
instead is correct because writes are the rare case: every write bumps a
generation counter, and a refresh whose stamp is stale throws itself away rather
than winning. Nothing found this but reading the method again; it is the kind of
mistake that passes every test written before it, because the test that catches
it is the one the bug tells you to write.
Forgetting is new, and persistence is what made it mandatory rather than
convenient. A mismatch is a hard refusal with no way to continue — deliberately,
and that stays — so pinning a key permanently is also a way to make a
legitimately rebuilt server permanently unreachable. Before this change the pin
died at exit and the problem solved itself; now it does not.
ForgetAsync drops every algorithm for an endpoint, and it is reachable from the
host editor rather than from the warning. Putting it on the mismatch banner would
have made it two clicks from "this may be an attack" to "connect anyway", which
is the affordance the hard refusal exists to deny. The banner already promised
the key could be removed in the host's settings; that promise is now true and
points at the button.
Trust recorded on another machine becomes visible at the next sync pass, not
immediately, and that is a decision rather than an oversight. The failure it
produces is a first-contact prompt for a host a colleague approved a minute ago:
answerable, and self-correcting on the next pass. The opposite trade — polling
the vault on the handshake thread to close a one-minute window — buys nothing
and costs the property above. The dangerous direction is not reachable at all: a
pin recorded here enters the snapshot as part of recording it, so a refresh can
never discard a local trust decision.
The server learns nothing, and this is the item type where the temptation was
real. A plaintext host column would let a known-hosts screen sort and page
without decrypting anything, and it would hand the operator the map of every
user's estate — assembled, as these things are, out of facts that are each
individually harmless. A host row concedes an address only when relay is
switched on and the database refuses to store one otherwise (ADR 0004); there is
no equivalent excuse here. The table has no column to put one in, and the EF
configuration says so where somebody adding it would be standing.
Two things about the migration in this commit are worth knowing, because both
came out of getting it wrong.
It was hand-written first, including its .Designer.cs, and that version is not
what is here. Verifying it turned up something that had been quietly assumed:
Migration_AppliedCleanly_WithNoPendingModelChanges does not check the model
snapshot. It asserts that migrations applied and that none are pending, which a
wrong snapshot satisfies perfectly — the snapshot only matters as the diff base
for the *next* migrations add, so an incorrect one passes the whole suite and
corrupts the following migration instead. The real check is to generate a
throwaway migration and confirm its Up and Down come out empty. They did, and
the generated designer was byte-identical to the transcribed one across all 1255
lines, so the hand-written work was in fact correct.
Then dotnet ef migrations remove --no-build deleted the wrong migration. With
--no-build the tool reads the previously compiled assembly rather than the files
on disk, and the probe had just changed which migration was last, so it removed
AddKnownHostKeyItem and reverted the snapshot. That turned out to leave exactly
the right diff base, so the migration here is EF's own output rather than a
transcription — a better outcome than the one that was interrupted, arrived at
by accident. Never pass --no-build to migrations remove.
Mutation tested, all three sabotages detected: dropping the algorithm from
KnownHostIdentity.For, merging instead of replacing in Install, and pointing
KnownHostKeyCipher at PortForward — which is what a cast from the wire enum's 10
would silently produce. Each is caught both by an assertion about the mechanism
and by a behavioural test that never mentions it; the resource-type sabotage is
caught by the table from
|
||
|
jaap-jan
|
70b3290a77 |
Bind an SSH key to a host instead of picking one per connection
A host now names the key it authenticates with, or none, as a field in its encrypted payload — so the choice follows the host to every machine rather than being made again each time somebody connects. The per-connection "Use key" switch it replaces was a stopgap for not having this, and keeping both would have left two mechanisms answering one question. This is the first payload schema version bump, and it does not work the obvious way. A host is written at the *lowest* schema version that can represent it: one that binds a key is written at 2, one that does not is still written at 1, byte for byte as it was before the field existed. The version is what makes an older client refuse to edit an item, so stamping 2 unconditionally would mean upgrading a single machine and renaming a single host made that host uneditable on every machine that had not upgraded yet. Confining the cost to the hosts that actually use the field is the difference between a team noticing a bump and a team being blocked by one. HostSecretCodec states the rule so the next field added follows it, and a test pins the version-1 bytes against a literal rather than against the codec, because the claim is about history: every host already in every vault has to re-encode to what it encoded before, or the first sync after an upgrade would push the whole vault as changed. A binding is an item id, not a copy of the key — a second copy of a private key is one that goes stale — which means the reference can dangle when the key is deleted on another machine. Both places that meets are handled the same way, by refusing rather than falling back: - Connecting to a host whose key is gone is refused outright. A host somebody deliberately set up for key-only access must not quietly start offering a password. - Opening such a host in the editor keeps the binding, selected, labelled as missing. The quieter version of the same failure is someone editing the port and saving, silently converting the host to password authentication with nothing ever having said so. Two things this found by being falsified: - The merge was untested for the new field, and "just take the server's value" passed the entire suite — a local binding change would have been discarded with no conflict recorded. HostSecretMergeTests already had a test written for exactly this class of omission; it simply had not been extended. - Adding a nullable field exposed a defect in HostSecretMerge.Field: it short-circuited when the discarded value was null, so the formatter never ran for the one case where null is a value rather than an absence, and a field whose absence has a name could not report it. Now the formatter always runs, and "no key" appears in the conflict log where an empty string used to. Also fixes eight nullable warnings in SyncEndpointTests left by the server-side SSH key commit, which had omitted the null-forgiving operator the rest of that file uses. They were invisible until an unrelated change forced the project to recompile. The end-to-end slice now binds its host to its key, so a schema-version-2 payload goes through the real API, the real PostgreSQL and back out on a second machine. 745 tests green. Zero warnings, dotnet format clean. |
||
|
jaap-jan
|
e3fd3e1728 |
Sync and authenticate with SSH keys on the client
Completes the client half of SSH keys: they sync alongside hosts, appear in their own list, and can be selected to authenticate a connection instead of typing a password. The reconciler and the repository were Host-typed throughout, so the choice was to generalise them or to keep a second copy per item type. Generalised, because ItemReconciler's whole premise is that the pull and the push paths must answer the same collision the same way — two copies would drift the first time one of them was fixed. What is genuinely per-type now arrives through IItemKind<TSecret>: the cipher, the merge, the plaintext columns, and the noun to use when telling a person what happened to their item. Generic where the server's IItemKind is not, and for the reason that reverses there — the client needs the concrete type, because it merges field by field. The pull filter is derived from the same registry that builds the reconcilers. That is the specific failure being designed out: an item type that encrypts, merges and lists perfectly and is never once requested from the server, so it works on the machine that made it and exists nowhere else. No client cache migration. The item table's primary key and the outbox's unique index already carry the entity type, and AadResourceTypes already mapped SshKey — so a host and a key may share an id and never see each other's rows, which SshKeySyncTests now arranges deliberately. A key hands the server nothing in plaintext. There is a public_key_fingerprint column and it would be accepted; leaving it null is deliberate. A fingerprint is not secret but it is a stable identifier for a key pair, so filling it would let an operator tell which of their users hold the same key and correlate one across vaults, for a column nothing reads. The design allows itself one plaintext concession — the relay address, which the relay cannot work without — and this is not that. A key is chosen per connection rather than bound to a host, which works the way ssh -i does. Binding one needs a field on HostSecret and therefore a payload schema bump, which makes every host written afterwards read-only on an older build; worth doing deliberately rather than as a side effect of adding keys. Three things this found, all of them by being falsified rather than by review: - Making the reconciler generic silently turned a record comparison into reference equality, because == on a type parameter is not value equality. The effect would have been a conflict recorded on every pass for an unacknowledged create that had in fact landed. Sabotaging the fix left all 73 tests passing — nothing covered that branch — so ConflictMatrixTests now has AnUnacknowledgedCreateThatDidLand_IsDroppedQuietly, which fails without it. - A test asserting that a blank passphrase reaches SSH.NET as null was vacuous: it exercised the editor, not the credential path, and passed with the guard deleted. Resolved by making SshKeySecret.Passphrase normalise an empty string to null, so there is one spelling of one state — which also keeps two clients from producing different payload bytes for an identical key. That exposed a wider gap: SshKeySecret, its codec and its merge had no direct unit tests at all. They have 25 now. - The reason first given for that normalisation was false. It claimed SSH.NET rejects a passphrase supplied for an unprotected key; measured against a real sshd it ignores it and authenticates anyway. Corrected everywhere it was stated and recorded in docs/platform-flags.md. The same test file also closes a real hole: SshPrivateKeyCredential had never been exercised against a server, because the existing key test builds SSH.NET's auth method directly and bypasses the path a vault-held key actually takes. Only one editor may be open at a time. Both sit in the same 340-pixel column as Auto rows and their heights together exceed it at the window's minimum size, so two open editors put the lower one's Save and Cancel past the bottom edge — the same failure this window already shipped once with the setup screens. Expressed as a state rule because that is the only form of it this repository can check: nothing here loads a .axaml. The refusal keeps what was typed, since in the key editor that is a pasted private key the user may have nowhere else. The end-to-end slice now carries a key as well as a host, so both item types go through the real API, the real PostgreSQL and the real crypto in one pass — the three hand-kept mappings between enums that do not line up are the reason that is worth doing rather than trusting the unit suites. 735 tests green, including the container-backed SSH and end-to-end suites. Zero warnings, dotnet format clean. |
||
|
jaap-jan
|
586cb303d5 |
Merge branch 'claude/gallant-brahmagupta-1f8244'
Writes down that locking the vault leaves shells running, and shows the count on the unlock screen rather than leaving it to be inferred. Conflict resolution: - ShellFlowTests' fixture keeps main's FakeSshConnectionFactory. The branch added an IdleSshConnectionFactory for exactly what main's fake already does — a shell that is open, silent and never closes on its own — so FakeSshConnections.cs is dropped rather than merged, leaving one fake SSH stack in the suite instead of two that would drift apart. - MainWindowViewModel and TerminalWorkspace: both sides added their own members, so both are kept. - TerminalWorkspaceTests was added by both branches, with the renderer gate on one side and session lifetime on the other. Merged into one class over one set of helpers; the gate tests now use FakeConnectionFactory rather than an NSubstitute stub, since the suite already has the fake. gallant's polling Timeout constant is PollTimeout, which no longer reads as the renderer's. - platform-flags.md keeps main's measured focus section and drops the short "nothing hands the terminal keyboard focus" entry the branch still carried, which that section supersedes. One genuine disagreement between the branches, left visible rather than flattened: this branch measured that a collapsed WebView cannot be typed into and attributed it to a hidden WS_CHILD window being ineligible for keyboard focus, while main's focus work measured Win32 focus still held by that hidden window and added a lock path that moves the keyboard off it. Both results stand; the mechanism sentence now defers to the focus entry, which makes the input barrier something the lock path maintains rather than something the platform guarantees. Full suite green, including the container-backed SSH tests. |
||
|
jaap-jan
|
74341d41e0 |
Merge branch 'claude/distracted-ritchie-53fc70'
Bounds the renderer wait, so a WebView2 that never initialises reports itself instead of hanging Connect with the busy flag stuck. Conflict resolution, all of it in the App test suite, which main had changed under the branch when sleepy-chebyshev landed: - The workspace fixture keeps main's fake SSH factory and its FakeRenderer-aware page, and takes the branch's RendererTimeout on top. One second rather than the branch's 250 ms, because the timeout now also bounds FakeRenderer's own wait for the attach it just made. - FakeRenderer arrived on main after the branch was cut and still called the no-argument WaitForRendererAsync. Both sides merged cleanly and left the build broken; it now passes its own token. - ConnectingWithNoRenderer's remark claimed the suite never starts the workspace and never attaches a renderer. Both are false here, so it now says what is true of the test: it is the one connect test that attaches no renderer. |
||
|
jaap-jan
|
9270d0cba5 | Merge branch 'claude/sleepy-chebyshev-cda68d' | ||
|
jaap-jan
|
d459dac600 |
Stop a dead WebView2 hanging Connect with the busy flag stuck
VaultViewModel.ConnectAsync awaited TerminalWorkspace.WaitForRendererAsync
with no timeout and no token, and RunAsync clears IsBusy only after the
work returns. Whether the renderer attaches at all depends on a runtime
this application does not install: with a missing or policy-blocked
Evergreen runtime, or an AppContainer that cannot reach loopback, the
socket never arrives — so Connect never returned, the window stayed
disabled on "Connecting…" for the rest of the session, and nothing on
screen said why. Left out of
|
||
|
jaap-jan
|
c6fc19bbbd |
Sync the vault automatically instead of only on a button press
Three triggers: once when the vault opens, straight after any local change, and every minute while it stays open. The Sync button stays, because someone just handed a credential wants to know now rather than within the minute, but nothing depends on it being pressed any more. A background pass is deliberately not the button's code path. Routing it through RunAsync would raise the busy flag every minute — disabling Connect and Save for the duration — and repaint the status line over whatever the user was reading. So it is quiet: the status changes only when a pass actually moved an item or produced something needing attention, and a pass is skipped outright while a command is running rather than queueing behind it. Both guards are covered; removing either fails a test. A shared semaphore serialises every pass, taken with a zero timeout rather than awaited — a pass arriving while another runs has nothing to add by waiting, and queueing them would turn a slow server into a backlog of identical work. Failures are swallowed, which is right in exactly this one place: a laptop closed all afternoon would otherwise replace the status line with a socket error once a minute. It is quiet rather than hidden — the account bar already shows when there is no connection, and pressing Sync reports the real reason. What earns that is the outbox: a test proves a change left queued by a failed pass is still sent by the next sync, so quiet never means lost. Two existing tests asserted the opposite behaviour — that a save queued and pushed nothing until Sync was pressed — and were rewritten rather than deleted; the local-first guarantee they were really protecting is that the list updates with no server, which the offline test still covers. Two things the tests caught in my own work. ReloadAsync had to be split out of LoadAsync because rebuilding the list repainted the status line unconditionally, which made "the background pass is quiet" false on the one path that mattered. And the yields-to-a-command test was vacuous as first written: saving pushes, so there was no pending change left and the assertion held with the guard deleted. It now fails the automatic push first to arrange a real queue. |
||
|
jaap-jan
|
5a899afd78 |
Decide what Lock does to a running shell, and say it
Pressing Lock nulled and disposed the vault view model and touched nothing else. TerminalWorkspace is injected from App.axaml.cs and outlives every lock, so the SSH connection, the pty and the pump all kept running while the window said "Unlock your vault" — and since |
||
|
jaap-jan
|
dbddbcd711 |
Hand the terminal the keyboard on connect, and take it back on lock
After a successful connect the first keystrokes went to the shell's UI rather
than the remote shell. The page's own term.focus() focuses the textarea inside
the document, which does nothing while the window's keyboard focus is still on
the Connect button, so the terminal had to be clicked before it would accept
anything.
The obvious guess about the fix — that reaching a native child window needs
SetFocus through P/Invoke — is backwards, and measuring it first is what kept
this small. NativeWebView overrides Focusable to true and its OnGotFocus calls
the adapter's Focus(), which on Windows is
ICoreWebView2Controller::MoveFocus(PROGRAMMATIC). So a plain Avalonia
Terminal.Focus() really does move Win32 focus into WebView2. Measured in a
standalone harness with no DodoSSH code, on the same 340,* grid as the shell,
reporting GetFocus() and the page's own document.hasFocus() at each step: focus
lands on the Chrome_WidgetWin_1 child and the page reports hasFocus: true.
It is the return trip the package does not implement. OnLostFocus calls the
adapter's ResignFocus(), and on Windows that method body is empty, so Avalonia's
focus and Win32's diverge: after textBox.Focus() the focused element is the text
box while the keyboard is still on WebView2 — a caret that silently receives
nothing. Window.Activate() and Window.Focus() were both measured and neither
recovers it, so the hand-back is a SetFocus on the top-level, in
Views/NativeKeyboardFocus.cs. A real mouse click does recover it, because
Avalonia's window sets focus on pointer input, which is why this is invisible to
anyone who clicks before typing.
That turned up a worse defect than the one being fixed, and it shipped in
|
||
|
jaap-jan
|
0500e43e02 |
Stop the terminal's WebView painting over the setup screens
The shell layered its setup and unlock screens over the terminal, which does not work: NativeWebView attaches a real Win32 child HWND through NativeControlHost, and a child window composites above everything its parent paints regardless of visual-tree z-order. The cards rendered sliced at the terminal column's left edge; at the window's default width every one of their buttons fell inside the WebView's rectangle, so the flow could only be completed by keyboard, and a click in that region handed Win32 focus to WebView2 so the text boxes silently stopped accepting keystrokes. The WebView is now collapsed while the vault is not unlocked. The comment that previously forbade this — hiding it means never realising it — was wrong: NativeControlHost creates the native attachment on attach to the visual tree, never consulting layout or visibility, and NativeWebView replays a Source assigned before its adapter exists. A collapsed WebView still starts WebView2, loads the page and lets the renderer attach. Confirmed: 35 msedgewebview2 processes with the control collapsed. What the first connection after unlocking actually depends on is the existing await on WaitForRendererAsync, since the data plane drops frames when no renderer is attached. Also fixes the second visible defect: the default server URL was https://localhost:7217, the API's *second* launch profile, while the README, its appsettings and a plain `dotnet run` all use http://localhost:5233 — so nothing was listening, and an HTTPS client against a plaintext port reports "The SSL connection could not be established", which reads as a certificate problem. The default now matches, a missing scheme is rejected by name instead of parsing as scheme "localhost", and that specific TLS failure now suggests http://. Both new tests fail when the fixes are reverted. Corrections to claims I made earlier and should not have: - docs/platform-flags.md asserted the opposite of the mechanism above and cited an established msedgewebview2 connection as verification. That observation was taken while the overlay was showing but, because of this very bug, the WebView was uncovered and in plain view — so it confirmed only that a visible WebView is realised. A process-level check cannot verify a rendering claim. The entry was also filed under "Local cache". - ITerminalHost was documented as the live seam the app plugs into, with a stub standing in for headless tests. It has no implementation anywhere and no test uses it; the view navigates the control directly. It also counted Avalonia.Controls.WebView and NativeWebView as two interchangeable backends when they are one component, with the Linux backend backwards. - The README claimed the shell's whole path was covered by tests. Its state machine is; its layout is covered by nothing, and a headless test could not have caught this — headless has no native window, so it would have rendered correctly and confirmed the wrong belief. Verified by screenshotting the running app: the card renders complete and centred at the default size, with the button clickable. |
||
|
jaap-jan
|
49f617b450 |
Wire the Avalonia shell to the vault
The host list now comes from the vault instead of from a form. A fresh machine takes a server URL, signs in through the browser, enrolls, and from then on opens with the passphrase alone. DodoSSH.Client.Session is the composition layer: where a profile lives, how it unlocks, and how a machine gets one. ClientPaths picks a non-roaming per-OS directory — %LOCALAPPDATA% and never %APPDATA%, because a SQLite cache that roams between two machines is a corrupt one, and each machine's outbox is its own. SessionOpener needs no transport at all and could not reach one if it wanted to; that is the offline unlock, asserted rather than asserted about. A wrong passphrase, a stale KDF and a grant revoked by a rekey are three different answers, because the remedies are three different things and telling someone to retype a passphrase that was never the problem is worse than saying nothing. The shell's states are the onboarding story. The recovery code gets its own state that cannot be clicked past: it exists for one moment, losing it with the passphrase loses the vault, and there is no server-side reset by design. It is dropped from memory on confirmation rather than merely hidden. Sign-in is a delegate over IVaultServer, so the whole state machine runs in a test against an in-memory server — no browser, no identity provider, no toolkit. The view models are plain observable objects, which is what makes that possible. What it does not cover is whether the XAML binds to the right names; that needs a rendered tree and Avalonia.Headless, and is its own piece of work. Three things found by doing it rather than by reading it: - Pooled SQLite connections keep the database file open after the last context is disposed. On Windows that means locked, so the application could never replace its own cache — and a test could not clean up after itself, which is how it surfaced. Dispose now clears the pool. - EF's SQLite provider puts the database in WAL mode, so the cache is three files. A comment in ClientCacheFactory claimed the opposite; reading PRAGMA journal_mode off a real launch settled it. WAL is the right mode here — a sync pass writes while the interface reads — so the comment was wrong on the merits as well as on the fact. - Enrolling a device key with nowhere to keep the private half would put a wrap on the server nobody can open and make the device list claim this machine can unlock without a passphrase. Device binding is now optional and the shell declines it until the OS keystore is wired. Verified on Windows: the client created %LOCALAPPDATA%\DodoSSH\cache.db and migrated it on first launch, and msedgewebview2 held an established connection to the data plane while the unlock overlay covered it — which is the point of covering the WebView rather than collapsing it, since a NativeWebView that is never laid out is never realised. 630 tests, up from 593. The recovery-code gate and the offline unlock were each verified by breaking them and watching the right test fail. Still to do for M1's actual definition of done: the manual run against the real API and a real Keycloak. Credentials are not a synced entity type yet, so a connection still asks for a password, and the interface says so rather than implying otherwise. |