be012585b352cdec40d18f2aed01fceffbba9efd
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jaap-jan
|
4300d917a8 |
Stop making people wait for a handshake, and give the host list a pointer
Connecting held the vault's busy gate, which meant a window that did nothing visible for as long as a machine took to answer — and against one that is merely asleep, that is the whole timeout. The gate is gone from that one command. A tab now appears in the strip in the same turn as the click, carrying "connecting…" rather than a pane, and the terminal's rectangle draws a card naming the host and the address being dialled. Every other screen stays usable, and two connections can be in flight at once. That splits the vault's one connection event into three, carrying an attempt id, because "which tab is this about" can no longer be answered by "the most recent one". The id also buys the two kinds of not-connecting their different endings: a refusal stays in the strip as a tab holding its reason, since by then the user is quite likely three screens away and a status line they are not looking at is not where a failure should end; a host key question takes the tab away and puts the window back on HOSTS, because the prompt is drawn there and a tab claiming failure would be competing with the thing about to resume it. ConnectAsync takes no CancellationToken any more, and that is load-bearing rather than tidying. A [RelayCommand] over a method that takes one generates a command that cancels the previous execution's token on every invocation — so asking for a second machine silently abandoned the first, measured as the first tab disappearing with "Cancelled." the instant the second was asked for. Giving up on a connection is closing its tab, and a session that lands after that is adopted rather than dropped: a shell running with nothing naming it cannot be closed at all. A tab is marked active on IsShowing rather than IsSelected. The selection survives navigating away — that is what makes the strip a way back to a terminal instead of a way to lose one — so a tab lit while preferences filled the window was a second "you are here" mark pointing at something nobody could see. The nav rail's own entries have always made this distinction. The host list grows the two gestures it looked like it already had. A right click selects the row under the pointer before opening a menu of Connect, Edit and Delete — the menu is on the list rather than in the item template, so its entries are the vault's own commands and not a row's, and it is cancelled outright over a group heading. Dragging a host onto a heading files it there, onto a host files it beside that one, and onto UNGROUPED takes it out of a group; the write is one field of one host through the same repository a save uses, refused while the editor is open because a drop is a gesture on the list and not on a half-typed form. Clicking a result in the palette connects, which is what a list of hosts under a search box looks like it does. It went through the shell's own command, so the pointer and Enter take one path. And the files screen's two pickers followed the vault's lists once, at unlock: a host or a bucket created afterwards could not be picked until the keychain had been locked and opened again, with nothing on screen explaining why the machine plainly in the host list was missing. They follow the collections now, re-finding the selection by id across the rebuild a sync pass causes every minute. 165 shell tests and 69 layout tests green, including the connecting tab, both failure endings, two connections at once, a connection in flight across a lock, and the right click acting on the row under the pointer rather than on the selection. The drag itself is in docs/manual-checks.md with the rest of phase 7 — headless Avalonia has no platform drag, and a test that claimed to have dropped something would pass while confirming nothing. |
||
|
jaap-jan
|
04faef6597 |
Move files to and from a host over SFTP
M2's file transfer, built bottom-up: an SFTP session on the SSH layer, a transfer queue in a project of its own, and the two-pane browser the design asked for replacing the screen that said it did not exist. Remote listings carry names, sizes, modification times and a real drwxr-xr-x — nothing in this repository could render a POSIX mode before — and the queue moves one file at a time with progress, throughput and resume. The design import assumed this would be an SFTP subsystem channel on ISshConnection, beside the shell on a transport that is already up. SSH.NET does not offer that: SftpClient derives from BaseClient and owns its own transport, and there is no supported way to hand it an SshClient's session. So file transfer opens a second authenticated connection, and it is named for that rather than dressed up as a channel — OpenSftpAsync is on ISftpSessionFactory, not on a connection. The difference is visible to a user: the host records a second login, and a host whose password is typed each time asks for it again on this screen. It goes through the same host key gate, the same pin and the same two refusals a shell does, so a fingerprint approved for a terminal is approved here and one approved here reaches the other machines with the next sync. docs/design-import-gaps.md is corrected, and marked as the one row where what shipped differs from what it predicted. Nothing is written at its final name until it is complete. Every transfer goes to a .dodossh-part file beside its destination and is renamed into place at the end, so an interrupted transfer can never be mistaken for a finished one — which matters most for what this screen is actually for, which is copying a build artefact onto a server and then running it. A destination that already exists is refused outright rather than overwritten: the queue has no way to ask, and silently replacing a file somebody's process is serving is the worse of the two failures. The remote pane has DELETE and MKDIR so that refusal is not a dead end. A test against the container pins the assumption underneath all of this — that SFTP's rename does not clobber. Resume works within a run of the application and not across a restart, and the limit is deliberate rather than unfinished. Nothing records which source wrote a part file, and resuming one on the strength of its name matching is how a corrupt artefact gets delivered with nothing reporting a failure; a part file found at startup is started over. Making it survive a restart needs the preferences store this client still has not got. The offset a resume starts at is the part file's own length rather than the transfer's recorded progress: a cancellation can land between a write completing and the counter moving, and only one of those two is a fact about the bytes that are there. The queue and its connection outlive a lock, as shells do. LockAsync already argues that locking must not destroy work in flight — it is what somebody does when they walk away from the machine, which is exactly when a long transfer is most likely to be running — so TransfersViewModel is created once and the vault is attached on unlock and detached on lock. What locking takes is the host list, and it has to: those rows carry decrypted secrets. DodoSSH.Client.Transfer is a new project rather than more of Client.Ssh. The two answer different questions — one is about reaching a host, the other about moving bytes and what to do when moving them stops halfway — and this is the only client project that deliberately touches the local filesystem. Three defects the tests found, none of which review would have. SftpPath.Name answered an empty string for the root. NavigateRemoteAsync wrapped itself in the busy guard, so navigating from inside another command did nothing at all and the remote pane simply stayed empty after connecting, with no failure anywhere to explain it. And opening an SFTP session per test made two handshakes per test — this client learns a host key by being refused — which pushed the SSH assembly past sshd's MaxStartups and failed a different few unrelated tests each run; the session is shared through the fixture now, with the reason written where the next person will hit it. 1004 tests green across 18 projects, 24 of them new: the SFTP subsystem against the OpenSSH container, the queue against a real temporary directory and a fake host, and three more layout measurements because a screen this window has never laid out is a screen never checked. Not verified: the screen has not been looked at running. The layout harness measures it at the window's minimum in three shapes, which is the class of defect that has shipped here before, but reaching it in the application needs the compose stack, the migrations, the API and a browser sign-in. What is still absent — the status bar's transfer count, dragging between the panes, transferring a directory, and sftp over a bastion — is in docs/design-import-gaps.md. |
||
|
jaap-jan
|
dbddbcd711 |
Hand the terminal the keyboard on connect, and take it back on lock
After a successful connect the first keystrokes went to the shell's UI rather
than the remote shell. The page's own term.focus() focuses the textarea inside
the document, which does nothing while the window's keyboard focus is still on
the Connect button, so the terminal had to be clicked before it would accept
anything.
The obvious guess about the fix — that reaching a native child window needs
SetFocus through P/Invoke — is backwards, and measuring it first is what kept
this small. NativeWebView overrides Focusable to true and its OnGotFocus calls
the adapter's Focus(), which on Windows is
ICoreWebView2Controller::MoveFocus(PROGRAMMATIC). So a plain Avalonia
Terminal.Focus() really does move Win32 focus into WebView2. Measured in a
standalone harness with no DodoSSH code, on the same 340,* grid as the shell,
reporting GetFocus() and the page's own document.hasFocus() at each step: focus
lands on the Chrome_WidgetWin_1 child and the page reports hasFocus: true.
It is the return trip the package does not implement. OnLostFocus calls the
adapter's ResignFocus(), and on Windows that method body is empty, so Avalonia's
focus and Win32's diverge: after textBox.Focus() the focused element is the text
box while the keyboard is still on WebView2 — a caret that silently receives
nothing. Window.Activate() and Window.Focus() were both measured and neither
recovers it, so the hand-back is a SetFocus on the top-level, in
Views/NativeKeyboardFocus.cs. A real mouse click does recover it, because
Avalonia's window sets focus on pointer input, which is why this is invisible to
anyone who clicks before typing.
That turned up a worse defect than the one being fixed, and it shipped in
|