Public Access
c3dfa42108b0a56bd3d114fcc27e110b72620a52
16
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jaap-jan
|
f05deb4fbc |
Add port forwarding: local, remote and dynamic, per terminal session
A host can now carry port forwards (-L, -R, -D), saved inside its encrypted payload as RelayTicketRequest.PortForwardId already assumed, so they sync and merge per forward like tags and pinned paths. The host schema moves to version 8 only for hosts that carry forwards. ISshConnection gains StartForwardAsync over SSH.NET's forwarded ports. Every listener binds loopback and there is no bind-address field: a forward is something any member of a shared keychain can edit. A remote forward's target is resolved here, IPv4 first, rather than by SSH.NET's constructor, which takes the first DNS answer and can send ::1. Forwards start with every terminal opened to the host and stop with its connection; a reconnect starts them again. The session sidebar lists them with state, failure reason and an on/off switch, the status bar counts the listening ones, and the host editor and detail pane gain a PORT FORWARDS section. A forward that cannot start fails alone. The phone does not start forwards yet: it has no surface showing what is listening, and its More screen now says so. No byte counts, since SSH.NET keeps none. |
||
|
jaap-jan
|
9ead42171c |
Stop a flooding remote growing the process, and let an ended session go
The terminal's memory was bounded by an argument that is not true of the SSH library underneath it, and the whole of CreditWindow's remark was that argument: the pump stops reading when the renderer falls behind, SSH's own receive window closes, the remote sshd blocks on write, and the backpressure reaches the process producing the output. The middle step does not happen. Renci.SshNet's Channels.Channel.OnData calls its window adjustment before it raises DataReceived and re-opens the channel window as soon as it drops below one packet, and ShellStream's own handler copies the bytes into a System.Net.ArrayBuffer without blocking and without a ceiling — a buffer that doubles on demand and is not given back until the stream is disposed. So a reader that stopped reading slowed the remote down by nothing at all. It only chose whose buffer the flood landed in, and it chose the one nothing bounds. Measured against the container this repository already runs sshd in: a reader that reads nothing while `yes` runs leaves ShellStream holding 8.9 MB after one second, 26.8 MB after three and 44.3 MB after five, its capacity stepping 16 → 32 → 64 MB. That is the report of "a massive memory leak on Windows"; it is not a Windows fault, it is simply where long sessions with heavy output live. The fix is to read continuously, which is what keeps SSH.NET's buffer empty, and to put the bound where it can actually be enforced. OutputBacklog is that bound: a byte-capped queue of unsent output, 4 MiB by default, which drops its oldest bytes when full and counts what it discarded. Oldest rather than newest, because the tail of a flood is the prompt somebody is waiting for. The two bounds are now separate and each is enforced where it means something. The backlog bounds what is waiting to be sent. The credit window goes on bounding what has been sent and not yet drawn — the queue inside the WebView that nothing on this side can measure — and is reserved against in the flush loop rather than the read loop. Reading is part of neither, because reading was never what the remote was waiting on. Dropping is announced rather than silent. A terminal quietly showing a different transcript from the one the remote sent is worse than one that says it could not keep up, because the second can be believed. The line goes out under its own opcode, TerminalServerOpcode.OutputDropped, rather than spliced into the output stream: what this application says about the transcript is not part of the transcript, and keeping them apart is also what makes the arithmetic hold — every byte read is either in an Output payload or counted in BytesDropped. It opens with an SGR reset, because the cut lands at an arbitrary offset and whatever escape sequence the remote was in the middle of has been left half-said. Frames are now capped at 64 KiB and taken straight into the frame buffer. The cap is the large-object-heap threshold rather than a guess — a quarter-megabyte array allocated sixty times a second is collected only by a generation 2 pass — and the direct take removes an allocation and a copy of every byte the terminal shows. The second half is the one that made the first half's cost persist. Nothing gave a session back when the remote hung up: TerminalWorkspace kept the entry, and with it an undisposed ISshConnection — an authenticated socket, its cipher state, and a keep-alive putting a packet on the wire every thirty seconds — plus the pump and SSH.NET's read buffer at whatever size the session's busiest moment had grown it to, for as long as the tab stayed open. A tab somebody typed `exit` into an hour ago was indistinguishable from a live one in everything except what it drew. ReleaseAsync disposes both, from AnnounceEndedAsync and after the announcement: the tab is told first, because tearing down an SSH connection in front of that would be latency on the one thing the user is watching for. The dictionary entry stays, because LiveSessionCount, IsSessionLive and the tab's own ENDED and RECONNECT all read it. SendInputAsync therefore asks about liveness rather than presence, since the shell channel is gone the moment the remote is. Two faults introduced on the way here and fixed, both worth naming because neither would have been visible from the outside: The read loop left through a condition on its cancellation token, and RunAsync reads a read loop that returns as the remote having closed the channel. A tab the user closed would have reported itself as a shell that exited on its own. It throws instead. With the reader finished and a renderer that had stopped acknowledging, the flush loop span: output to send, no credit to send it with, and a wait for more output that returned at once because there was some. RunAsync never completed, so the tab was never told and the connection was never released — a session invisible and permanent. The loop now leaves for the drain as soon as the backlog is complete, and RunAsync resets the credit window alongside completing it so a flusher already parked on an acknowledgement that will never come is released. Four tests asserted the old contract and now assert its reverse, which is the point rather than a relaxation — WhenCreditRunsOut_ThePumpStopsReading is now WhenCreditRunsOut_ThePumpKeepsReadingAndTheBacklogHoldsTheLine, and has to prove both halves at once. The throughput harness gained a counting transport, because a consumer that copies every frame into a 32 MB list was the slowest thing in the pipeline and a harness whose consumer cannot keep up measures itself. The fake shell gained a pace, so "a renderer that keeps up loses nothing" can be asked of a producer a network could actually deliver rather than of one running at memory bandwidth. The test that would have caught this in the first place is ARunawayRemote_KeepsBeingReadAndStaysInsideTheBacklog, and it needs the real SSH.NET and the real sshd to say anything: a fake shell hands over bytes when it is asked, and a real channel hands them over when they arrive. Under the old code its BytesRead would have stopped at exactly WindowBytes. 121 terminal tests pass over three consecutive runs with no flakes, 105 against the container, and the app, session, layout and remaining suites are unchanged and green. Manual checks 1.10a and 1.10b cover the two symptoms a person can see: a working set that plateaus under `yes`, and a connection that goes when the shell does rather than when the tab does. |
||
  laurensandClaude Opus 5
|
1908189100 |
Make the terminal's right button copy and paste, and never open a menu
Selecting output and right-clicking it opened the WebView's own context menu with Copy on it, which is correct behaviour for a web page and wrong for a terminal. What a terminal's right button has meant since the Windows console got QuickEdit, and since PuTTY shipped, is this: with something selected it copies and drops the selection, with nothing selected it pastes. No menu, no second click. The gesture can only live in the page. The selection is drawn into a canvas the host never sees, and once a terminal has focus the host's window receives no input events at all — the same reason the Ctrl+plus chords are handled there. ◆ THE CLIPBOARD IS THE HOST'S IN BOTH DIRECTIONS, AND THE READING IS WHY. navigator.clipboard.readText() is gated behind the clipboard-read permission in every Chromium, and an embedded WebView with no PermissionRequested handler answers a permission request by putting a prompt on the screen. Trading a context menu for a permission dialog is not this change. So the page asks and the host answers, exactly as requestFontSizeStep does. Writing does not go the other way either, although navigator.clipboard.writeText would have worked from the page on Windows: a clipboard that is the host's in one direction and the page's in the other is two mechanisms to keep working across WebView2, WebKitGTK and Android's WebView. The host has owned a clipboard delegate since the keychain grew its COPY buttons, so each App.axaml.cs grows a ClipboardReader beside its ClipboardWriter and MainWindowViewModel takes it. Three opcodes: client ClipboardCopy and ClipboardPaste, server Clipboard. ◆ Clipboard IS NOT Paste, AND THE DIFFERENCE IS THE BRACKETING. Paste carries a snippet off the sidebar, and the page deliberately *types* a single-line one rather than bracketing it, because bash marks a bracketed paste as an active region and a snippet should read as though it had been typed. A clipboard paste is the case those markers are for — readline uses them to decide it has been pasted into — so Clipboard is always bracketed and never followed by an Enter. One opcode for both would have needed a flag meaning "which of the two kinds of paste is this", on a payload whose existing flag byte means something else. Both client frames are dispatched before the session lookup, which is what keeps the gesture working in a pane whose shell has just ended: squinting at the message a remote left behind is exactly when somebody copies the line. Dispatch was past MA0051's length once it grew a second such branch, so the frames no pump needs to see moved into Announce() and the font-size chord went with them. ◆ CAPTURED AND STOPPED, RATHER THAN MERELY PREVENTED. preventDefault alone suppresses the menu and still lets xterm's own contextmenu handler run, which moves its helper textarea under the pointer at z-index 1000 and leaves the selection sitting in it, selected. Both of those exist to serve the native menu. Taking the event in the capture phase on the pane and stopping it there is what keeps the gesture wholly the page's. rightClickSelectsWord is now false, which on macOS is a change of default rather than a restatement of it: xterm sets it true there alone, so a right-click would have selected the word under the pointer and copied that instead of pasting — wrong on one platform only, which is the worst way for it to be wrong. The renderer harness grows the pane it has been inviting since RendererReconnectionTests: a fake Terminal, the two addons, and a real UTF-8 codec, because both directions run through the page's own TextEncoder and TextDecoder and a Latin-1 stub would pass a test with an em dash in the selection. Its warning about declaring names terminal.js declares now covers the half that does not SyntaxError — a harness frame() was silently replaced by the page's frame() and failed six tests on a type error a long way from the cause. Manual checks 1.11 and 11.13 are what is left for a person: that a real contextmenu event reaches a capture listener, that no native menu is drawn once it is prevented, and that xterm's real paste() brackets. 11.13 also records what is unverified — whether Android's WebView delivers a pointer's secondary click as a contextmenu event at all. ClipboardReader is wired on that head regardless, because the alternative is a head where the paste half silently does nothing and nobody finds out; that head is not compiled here either, this machine having no android workload. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-jan
|
e2733e5cbc |
Notice when a shell ends, say which way it ended, and offer the way back
A terminal whose machine rebooted stayed green for ever. Not "went stale and
recovered late" — for ever: the tab claimed CONNECTED, the elapsed timer went
on counting, and the only thing that ever corrected it was closing the
application. That is the defect this fixes, and it turned out to be two
separate failures wearing one symptom.
◆ THE HANG IS IN SSH.NET, AND KEEP-ALIVE ALONE WOULD NOT HAVE FIXED IT.
ShellStream ends a blocked read from exactly two places: its channel being
closed, and the session raising Disconnected. A shell that exits gives the
first. But Session raises Disconnected from one method only — OnDisconnectReceived,
for a server that politely says goodbye — and a socket that simply fails goes
down a different path entirely: RaiseError fires the error event, sets the
disconnecting flag and disposes the socket, without ever raising Disconnected.
So the stream was never disposed, its Monitor.Wait was never pulsed, and the
read blocked until the process ended. The transport was gone, the client knew
the transport was gone, and nothing woke the one thread that was waiting.
That is why the first attempt at a test for this sat at thirty seconds and
failed. Both halves are needed and neither is sufficient:
- Keep-alive makes the failure HAPPEN. An idle SSH session is a socket
nobody writes to, and TCP has no way to discover that the far end has gone
without writing to it — nothing was asked, so nothing could fail. Thirty
seconds, matching OpenSSH's own ServerAliveInterval examples. It is the
write that matters and not a reply: SSH_MSG_IGNORE need not be answered,
so this is traffic rather than a heartbeat with a deadline, and there is
no timeout invented here to be wrong about a slow link.
- Disposing the stream from the error handler makes it ARRIVE. Queued to the
thread pool and not done inline, which is not tidiness: this runs on
SSH.NET's message-listener thread, and closing a channel waits for the
server's close — processed by that same thread — so an inline dispose is
the listener thread waiting on itself.
SFTP gets the keep-alive too. Its operations are request/response and bounded
by ConnectionInfo.Timeout already, so it needs no equivalent wake-up.
◆ exit AND reboot ARE TOLD APART BY A LATCH, BECAUSE THE OBVIOUS WAY IS A RACE.
Wait for the read to end and then ask whether the transport is still up, and
against a real server the answer is wrong about half the time: this was the
only channel on the connection, so sshd hangs up a millisecond after closing
it. By the time anything could ask, the transport is gone either way — and a
poll would report every ordinary `exit` as a dropped connection.
So ISshShellSession.TransportFailure is set at the moment SSH.NET raises the
failure, which its own ordering puts strictly before the disconnect that wakes
the read. A read that has just returned zero consults a settled value: set if
the transport failed, still null if the remote merely closed the channel. The
pump turns that into a TerminalSessionOutcome — RemoteClosed, ConnectionLost,
ClosedLocally — carried on SessionEnded, which used to hand over a session id
and nothing else. A subscriber cannot work this out afterwards; by the time it
hears, there is no transport left to interrogate.
Deliberately no fourth value for "the remote rebooted". Nothing on the wire
distinguishes a reboot from a cable being pulled, and a name this client
cannot check would be a guess dressed as a fact.
◆ WHAT IS DRAWN, AND WHY IT IS NOT DRAWN OVER THE PANE.
The status bar says DISCONNECTED or SHELL EXITED where it used to say NOT
CONNECTED for both — a word that is honest about a tab still dialling and
useless about one whose shell has stopped. Red for the first and grey for the
second: one is a machine that stopped answering and the other is work
finished, and crying wolf on the ordinary end of every session is its own bug.
The tab strip's dot gains the same fourth state, on both heads.
Under the terminal, a strip carrying the reason and two buttons. It takes its
own Auto grid row rather than overlaying the renderer, and that is forced
rather than chosen: the WebView is a native child view composited above
everything Avalonia draws, so the alternative is collapsing the terminal — and
the scrollback is precisely what the user wants to read, because the last
thing the remote said is usually why it went. terminal.js already writes the
same sentence into the pane; this is the copy that does not scroll away.
RECONNECT reuses the tab in place, which is what the word means to somebody
who pressed it: the terminal they were working in comes back, where it was.
It dials through the vault's ordinary connect path, so every refusal — a key
that has left the keychain, an unknown host key, a group default that has
changed since — is decided in the one place that already decides them; what
this adds is which tab the attempt belongs to. The old session is closed as
part of it, because a dead shell still holds an authenticated connection this
process has stopped reading, and its pane still holds an xterm, a scrollback
and a WebGL context, of which a browser hands out about sixteen.
Two refusals it makes rather than pretending: a host reached by typing an
address has no keychain entry to redial, and one that wants a password typed
goes to the keychain with the sheet raised rather than being dialled with an
empty box. Both say so on the strip where the button was pressed, not only in
the vault's status on a screen that surface is not.
TRY AGAIN appears on a refused connection for the same reason, and it is worth
as much: the commonest refusal is a host that was not up yet.
◆ WHAT IS ACTUALLY VERIFIED.
Two tests against a real sshd in a container. `exit` is reported as the remote
closing the session — the one a polling implementation fails, and a fake shell
cannot show it because a fake has no server behind it deciding to hang up. And
a live shell losing its transport is reported as a lost connection, produced
by dialling through a plain TCP relay the test owns and then cutting it; the
container is shared by the collection, so killing sshd was never an option.
The first draft of that second test used LoopbackProxyTests' SOCKS forward and
timed out: disconnecting the carrier of a ForwardedPortDynamic does not close
the loopback socket it accepted. Recorded in the test, because it is a
property of SSH.NET's forwarder rather than of anything here, and it is not
what a dying machine looks like.
What no test reproduces is the waiting. A relay that closes sends a FIN, so
the socket reports itself at once; a machine switched off sends nothing, and
finding that out is the keep-alive's business and the OS's retransmit budget's
— neither of which a test can hurry along without a clock this code does not
own. A reboot is prompt in practice because the machine comes back and RSTs.
Beside those: three pump outcomes, three workspace announcements, and seven
shell-flow tests covering the drop, the clean exit, reuse of the tab, retry
after a refusal, and both ways a reconnect can honestly come to nothing.
Also fixed in passing: SshNetShellSession.IsOpen read ShellStream.CanRead,
which is documented as always true — the stream stays readable after disposal
so buffered output can be drained — so it had answered "yes" for every shell
that ever existed. It reads CanWrite now. And MainWindowViewModel's session-
ended handler moved from Dispatcher.UIThread.Post to the injected post
delegate, which is what makes any of the shell half testable at all; the
remark listing the three unreachable posts is one shorter.
|
||
|
jaap-jan
|
8a77b7ca68 |
Say how far a connection has got while it is still being made
The connecting card set its status string once, when the tab was created, and never touched it again. Every connection therefore looked identical from the outside: one three seconds into a key exchange, one waiting out a fifteen-second timeout against a machine that is asleep, and one that had hung all drew the same "connecting…". The card now draws the five steps of getting there, each lit at the moment the handshake reports reaching it, over an amber track that fills as they finish. ◆ NOTHING ON THE LIST IS INVENTED. Every row changes state because a layer below it said so, at the instant the thing it names actually began. That is the whole reason it is worth showing, and it is why most of this commit is plumbing rather than XAML: there was no progress reporting anywhere in the stack to hook a step list onto, and a card animating plausible progress would have been indistinguishable from one that had stopped receiving any. SshConnectionPhase names four phases and deliberately not more. SSH.NET runs the entire handshake inside one ConnectAsync and raises exactly one event from the middle of it — HostKeyReceived, once the key exchange has produced a key to show — so that event is the only interior moment there is to report. Everything before it is Reaching and everything after it is Authenticating. A fifth phase in that assembly would have to be a timer, so there is not one. OpeningShell is reported by TerminalWorkspace instead, because that is where it happens: the factory's work ends with an authenticated connection, and asking for a pseudo-terminal on one is a separate round trip. The SFTP path passes null — a second connection opened behind an already-open shell has nobody watching a step list for it. The card's fifth step, "Starting the terminal", is the renderer wait and lives in the shell rather than in the SSH assembly, which has never heard of a renderer. On the first connection after a cold start it is a real wait with a real failure mode of its own — a missing WebView2 runtime — so a list that began at "reaching the host" would leave the one wait most likely to hang unnamed. Amber for the step in flight, and that follows the palette's rule rather than bending it. Green is what is true and purple is what you can press; a step still happening is neither, and it is exactly the caveat-worth-reading that amber exists for. Steps behind it go green as they become true. Nothing animates, which is the argument TransfersScreen.axaml already makes for its own track, reaching a screen with far more reason to want a spinner: a spinner is furniture invented to fill a state nobody measured, and these states are measured, so the track fills to what has finished and then waits there. A refusal keeps the step it stopped on, in red, with the ones behind it still green. That is the half a progress bar could not do, and it is the difference between "that host is not there" and "that host is there and would not have me" — a question the reason sentence alone frequently does not settle. The strip's dot goes amber while a tab is connecting, on both heads. It was grey, and so is a tab whose shell has exited: the two states in that strip with the least in common, one worth waiting for and one over. PhoneShell's own comment already recorded half of this — the dot stopped being green before anything had answered — and this is the other half. Progress is raised inline rather than through System.Progress<T>, which captures whatever synchronisation context it was constructed on and posts to it. That reads like a convenience and is really a second place the marshalling decision gets made: silently, differently under a test with no context, and out of order with respect to the failure that follows a phase. The shell marshals once, in one handler, through a new optional post parameter on MainWindowViewModel — the same seam TransfersViewModel already uses, and for the reason its own remark gives. The three Dispatcher.UIThread.Post calls that predate it are the ones this suite's comments record as out of reach; they are left alone rather than swept in here. Both heads draw the list. They differ in one place: Phone.axaml's mono class sets a colour and a size along with the family, so the caption rule names its own family instead of composing the two and asking two rules for one Foreground. The desktop's mono sets the family alone, which is why ConnectingCard does compose them. Each head also gains SHOW LOGS beside the button that gives up — the step list is this attempt and the log is every other one, which is what a connection taking too long actually raises. Seven tests, and the two that matter most run against the container rather than a fake: a real handshake reports its phases in order, and a host-key refusal never claims to have authenticated. A fake asserting what it was written to assert would have established nothing about either. The rest cover the tab advancing while the connection is gated, the step a refusal stops on, and a phase reported after the user has given up on the tab. 1,861 tests, none failing. The Android head's layout is not verified by anything. It compiles, and compiled bindings mean every new binding path resolves, but that project is not in DodoSSH.slnx, there is no test project for it and no device here — so unlike the desktop card, whose shapes the layout harness measures, these rows have not been drawn. Vertical fit is reasoned, not observed. |
||
|
jaap-jan
|
e936ab4646 |
Announce a session's end when it is actually over, and for closes too
The phone's notification kept saying '1 shell connected' after the shell was gone, and both close routes were at fault. A shell exiting on its own raised SessionEnded from inside its run's finally block — where the run task is by definition not yet complete, so the LiveSessionCount the keep-alive reads still counted the dead shell, and nothing fired later to correct it. A tab closed by hand announced nothing at all, by a recorded decision that assumed every subscriber was the closer; the keep-alive is not, and a close it never heard about left the notification claiming a shell over nothing. The end is now announced from a continuation after the run completes, and CloseSessionAsync announces after its own drain — every subscriber was already a reconcile-to-reality handler, so the echo the old remark feared costs nothing. Shutdown stays silent: it is dismantling the subscribers along with the sessions. |
||
|
jaap-jan
|
4d1f07f253 |
Replay the live sessions to a renderer that just attached
Each live session gets its credit window reset — the unacknowledged bytes died with the old page, and their acknowledgement is never coming — and its SessionOpened frame again, flagged as a replay so the page can tell a reattach from a genuinely new session. A session whose shell already ended gets nothing: its scrollback lived only in the page that is gone, and a frame implying otherwise would lie. RendererReattached is the seam for what the workspace has no business owning: the font size and the selected tab live in the shell, which re-pushes them from its own subscription. |
||
|
jaap-jan
|
8209f15741 |
Let a session's transport say what it negotiated
ISshConnection and ISftpSession both carry Cipher now — the server-to-client algorithm off SSH.NET's own ConnectionInfo, captured once because a rekey is not an event that library raises — and TerminalWorkspace.GetSessionFacts hands that plus the host key's algorithm back per session, without ever handing over the connection itself. Nothing reads either yet; the status bar that will is the next commit. |
||
|
jaap-janandClaude Opus 5
|
c00e5dbc5c |
Let the terminal's text be made bigger, and remember how big
Taking pinch-zoom off the phone left nothing in its place, and there was nothing on the desktop either. This is the replacement, and it is deliberately not the thing that was removed: zoom scales what has already been drawn, so the remote goes on wrapping to a width that is no longer on screen. Changing the font size refits the grid and reports the new column count, so the far end is told it has fewer columns. That round trip is the feature. The size is one number, owned by the shell. It has to be, for two reasons that pull the same way: it must survive a relaunch, and it must be reachable from a phone that has no Ctrl key to press. So the page asks and the host decides — a signed step over a new client opcode, answered with a size over a new server opcode. The phone's buttons and the desktop's chords arrive at the same place, and a size set by either is the size both remember. Stored in settings.json beside the cache rather than in it, and that is not laziness about a migration. The cache is encrypted and unreadable until a vault is unlocked, and the first terminal of a locked launch needs the size already. Nothing secret may go in that file; ClientSettings says so out loud, because the next person to add a preference is the one who needs to read it. Where it is reachable from differs per head, and only here. The phone gets A− and A+ on the connection line — not in the accessory row, which scrolls, and a control that fixes unreadable text must never be the thing that is off-screen. The desktop gets the three chords every terminal emulator has, answered by the page while a terminal has focus and by the window when it does not, plus a row in preferences that shows the current value and names the chords rather than replacing them. Someone whose terminal is too small to read is not in a position to go looking. Clamped 8 to 32. Below eight a monospace grid stops being legible and becomes a texture, and every column of it is still a column the remote is being told exists; above thirty-two a phone in portrait has too few columns to hold a prompt. The buttons disable at the ends rather than accepting presses that do nothing, which on a terminal reads as the application having stopped responding. The preferences screen's header comment claimed none of the design's terminal settings could be saved, and listed the three things that were missing to make one work. All three now exist, so it says which one is real and why the other five still are not. Verified with the protocol suite — including that the step byte round-trips signed, since read unsigned a step down arrives as 255 and clamps to the largest font, making "smaller" do the most dramatic available version of "larger" — a data-plane test that the chord is heard with no session registered, and five shell tests: the default matches the renderer's, both clamps hold, reset works, and a size chosen in one shell is there in a second one over the same profile directory. Layout suite and both heads build. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
jaap-jan
|
7a3a521c59 |
Give the phone the rest of its screens, and a way in
All seven screens of the design, plus the two it does not draw because it starts at an enrolled phone: naming a server, and choosing a passphrase. The five states docs/android-port.md worried about losing at 360dp are all here and none of them softened. The changed-key refusal is a full-screen panel rather than a bottom sheet, because a sheet is swipe-to-dismiss by convention and that screen must have no way forward. The recovery code raises FLAG_SECURE for its own state and lowers it afterwards, so the sentence about screenshots is true rather than decorative. The delete confirmations keep their counts and replace the row in place. Signing in works, and the seam it needed is worth more than the implementation: IAuthorizationCallback now sits between OidcClient and the loopback listener, so the two heads differ in where the response arrives and in nothing else. PKCE, the state check, discovery, the token exchange and the key binding stay one implementation — a second OIDC client would be a second place for a security bug to live. The phone registers a private-use scheme with the system rather than binding a loopback port, which on a shared device any other app can do first. The accessory key row needed TerminalWorkspace.SendInputAsync: ordinary typing goes from the renderer straight down the socket, and there was no way in for the keys a software keyboard does not have. Ctrl latches, because one thumb cannot chord, and the latch is drawn — a modifier that is on and does not look on is how somebody sends ^L to a database prompt believing they typed an l. 597 client tests green, including two new ones for the input path and one for the terminal surface command. Nothing has run on a device. |
||
|
jaap-jan
|
d07b336868 |
Free the terminal from the Hosts screen, and fill the room it left
The WebView sat inside the Hosts grid, so navigating to Files or the keychain hid every open terminal and the strip that named them. A connection you had opened was invisible from four of the five screens. The window now has two surfaces rather than one: a nav rail that says which page you are on, and a terminal strip that is always there and switches the whole content area to a shell. Screen keeps meaning "which page" and never becomes a sixth kind of page, which is why this is two properties instead of one enum with a terminal member in it. Every screen lives inside one wrapper panel that collapses when a terminal is showing. That is not tidiness — the WebView hosts a Win32 child window that composites above everything Avalonia draws, so a screen left visible over its rectangle is a screen sliced in half, and this window has shipped that defect once already. One decision point, IsTerminalShowing, and a nested panel rather than five compound bindings nobody would remember to extend. The focus choreography is the part no test in this repo can see. Every reveal path now focuses in the same turn the WebView appeared, so all three of them post at DispatcherPriority.Loaded and let the native control re-push its bounds first. Going the other way had a real bug: the screen-changed branch called a bare Focus() where it had to release the keyboard from the native child, so switching from a terminal to Files silently ate the first keystrokes. Rare before this commit and the primary gesture after it. The tab strip grew a cross inside each tab, a plus that opens the quick-connect palette, and middle-click close. Nested buttons are correct here: Avalonia handles a left press on the cross and deliberately does not handle other buttons, which is exactly what lets middle-click bubble up from the cross as well as the tab. The test is PointerUpdateKind rather than IsMiddleButtonPressed, because the latter reports button state and is also true for a left press made while the middle button happens to be held. The handler is on the tab and not the strip, so the background closes nothing by construction. Plus opens the palette rather than a flyout, since a menu dropping into the WebView's rectangle may or may not composite above a child HWND and this repo does not make rendering claims it has not photographed. Everything a user reads now says keychain. The wire, the database and the cryptographic spec still say vault, deliberately: renaming those is a migration and a protocol change for a word. That split is written down rather than left to be rediscovered as an inconsistency. Four things that were squeezed into the keychain's category rail, or into nothing at all, now have screens. Pinned host keys get one, with fingerprints never truncated and a filter that matches them, because comparing what you have against what the operator published is the whole workflow; the approved date is read out of the item's UUIDv7 rather than added as a column, and says so, since it means first approval and not last use. Keys can be generated in the client, which needed the openssh-key-v1 container written by hand — there is no BCL or NSec helper, and the PKCS#8 route is unverified in the SSH library this uses. The armour carries no passphrase: encrypting it needs bcrypt_pbkdf, which is Blowfish with a swizzle, in a project whose crypto is otherwise entirely libsodium, for a protection the key's own remarks argue is redundant inside a vault. Generation fills the existing editor and stops, so SAVE stays the one thing that writes. ~/.ssh/config can be imported behind a preview that is ticked per row and writes nothing until the button; IdentityFile records the path and imports the key material only on an explicit opt-in, because reading somebody's private key into a vault is precisely the act this product exists to make deliberate. Match blocks and ProxyJump are reported rather than obeyed — one cannot be evaluated statically and the other has nothing behind it to route with, and a preview that implied otherwise would be worse than one that admits it. Files can be dragged in all four directions that are honestly available. Remote to Explorer does not ship and is not pretended to: the shell wants the bytes during the drop, which needs a virtual file and a native COM data object, outside what Avalonia offers. Note for the next person that Avalonia 12 replaced the drag model outright — DataObject and DataFormats are no-op stubs and IDataObject is not in the reference assembly, so every tutorial written for 11 does not compile here. Hosts can be grouped, flat and never nested. A parent id merged as a scalar lets two offline clients each re-parent A under B and B under A, producing a cycle inside an encrypted payload that no server can police and every reader would have to detect for ever. Membership lives in that payload rather than in the one plaintext concession ADR 0001 allows, whose test is that the relay cannot function without it — nothing on the server reads a group, so what plaintext would hand over is a clustering of the estate for nothing. The plaintext column reserved for it is dropped, provably always null, and the server now refuses a client that sends one; it was never populated, was copied on apply, and was not cleared on delete, so a group id would have outlived the host it described. Snippets insert through xterm rather than through the pump, because xterm is the only thing that knows whether the remote has bracketed paste on, and that is what makes a shell treat embedded newlines as text instead of as execute. The host process moves opaque bytes and never parses output, so it would have to guess, and guessing wrong runs every line. Running is off by default and the copy says the text goes into whatever is there — the terminal has no notion of being at a prompt, and may be in vi or at a password prompt with echo off, so the Enter the user presses themselves is the entire safety property. Connections and keychain changes are recorded as synced encrypted items, which is what makes them auditable by a team later and costs the server knowledge of connection rate and timing from row counts alone. ADR 0001 already concedes it cannot hide that class of metadata; the trade is now written into it rather than left implicit. A connection entry is written once, at close, which is what makes a synced log tractable: nothing to merge, one outbox row, no chance of colliding with itself. Live sessions come from memory, not from the log. The write is void by contract and posts to a bounded channel, because putting an encrypt-and-write on the teardown path of every session is how closing the application comes to take four seconds. A ticket opened before a lock still closes afterwards, since a shell outlives the vault. The activity log hooks the one generic repository every kind writes through, so it cannot miss a caller — which is also why the log kinds themselves declare they are not audited, or the first entry would write an entry about writing an entry. It records the names of the fields that changed and never their values; a log with an old password in it would be a plaintext credential store with no vault around it. Retention is 90 days or 5,000 entries, whichever bites first, pruned on the sync loop rather than on a second timer. That log traffic then broke the status line, which is worth recording because the fix is a shape and not a patch: background sync counted its own log rows as pushed items, so the quiet rule stopped being quiet and every action's message was overwritten a second later by a sync report. The report now separates log rows from user items and the rule reads the latter. S3 buckets appear as a remote in the file browser, behind the same interface an SFTP session implements, so the queue and both panes did not have to learn what they are talking to. Uploads go through a pipe, because the queue wants to write and the SDK wants to read; memory is then bounded by the part size instead of buffering a file to disk twice. Finally, the Windows device key store moved out of the session project, which was the one thing keeping it from being portable — everything else in it is platform-neutral, and a Windows CNG dependency in the middle of the vault code meant a second head could not reference it without dragging Windows along. The seam that made the move free was already there. docs/android-port.md is the audit behind that: what ports, what does not, in order of cost, the four decisions taken, and an inventory of every screen and state the interface has to carry, written so a design can be made from it directly. dotnet build, dotnet test and dotnet format --verify-no-changes are all clean: 1240 tests at zero warnings, including the end-to-end suite against real containers. The manual checks that headless Avalonia cannot make — the drag from Explorer, a generated key against a real host, twelve tabs at the minimum window width — are listed in docs/manual-checks.md and are still outstanding. |
||
|
jaap-jan
|
9a76eced14 |
Give hosts and terminals their own screen, and the rest of the vault another
Rebuilds the client's shell from an imported design: a titlebar and nav rail it draws itself, real multi-session tabs over the one WebView, a Ctrl+K host search, and a vault screen that merges keys, passwords and pinned host keys into one table. Hosts left the vault column for their own screen beside the terminal, which is what the design asks for and turned out to be the better split anyway. Two screens the design shows have nothing behind them yet — file transfer and teams — and say so plainly rather than rendering invented data; every other gap between the design and this build is recorded in docs/design-import-gaps.md. |
||
|
jaap-jan
|
586cb303d5 |
Merge branch 'claude/gallant-brahmagupta-1f8244'
Writes down that locking the vault leaves shells running, and shows the count on the unlock screen rather than leaving it to be inferred. Conflict resolution: - ShellFlowTests' fixture keeps main's FakeSshConnectionFactory. The branch added an IdleSshConnectionFactory for exactly what main's fake already does — a shell that is open, silent and never closes on its own — so FakeSshConnections.cs is dropped rather than merged, leaving one fake SSH stack in the suite instead of two that would drift apart. - MainWindowViewModel and TerminalWorkspace: both sides added their own members, so both are kept. - TerminalWorkspaceTests was added by both branches, with the renderer gate on one side and session lifetime on the other. Merged into one class over one set of helpers; the gate tests now use FakeConnectionFactory rather than an NSubstitute stub, since the suite already has the fake. gallant's polling Timeout constant is PollTimeout, which no longer reads as the renderer's. - platform-flags.md keeps main's measured focus section and drops the short "nothing hands the terminal keyboard focus" entry the branch still carried, which that section supersedes. One genuine disagreement between the branches, left visible rather than flattened: this branch measured that a collapsed WebView cannot be typed into and attributed it to a hidden WS_CHILD window being ineligible for keyboard focus, while main's focus work measured Win32 focus still held by that hidden window and added a lock path that moves the keyboard off it. Both results stand; the mechanism sentence now defers to the focus entry, which makes the input barrier something the lock path maintains rather than something the platform guarantees. Full suite green, including the container-backed SSH tests. |
||
|
jaap-jan
|
d459dac600 |
Stop a dead WebView2 hanging Connect with the busy flag stuck
VaultViewModel.ConnectAsync awaited TerminalWorkspace.WaitForRendererAsync
with no timeout and no token, and RunAsync clears IsBusy only after the
work returns. Whether the renderer attaches at all depends on a runtime
this application does not install: with a missing or policy-blocked
Evergreen runtime, or an AppContainer that cannot reach loopback, the
socket never arrives — so Connect never returned, the window stayed
disabled on "Connecting…" for the rest of the session, and nothing on
screen said why. Left out of
|
||
|
jaap-jan
|
5a899afd78 |
Decide what Lock does to a running shell, and say it
Pressing Lock nulled and disposed the vault view model and touched nothing else. TerminalWorkspace is injected from App.axaml.cs and outlives every lock, so the SSH connection, the pty and the pump all kept running while the window said "Unlock your vault" — and since |
||
|
jaap-jan
|
5fccd53824 |
Add the Avalonia app and the xterm renderer, and fix two real bugs
The terminal works end to end. A new integration test drives a real sshd in a container through a real PTY, the real pump, the real loopback WebSocket with its token and origin checks, and a ClientWebSocket standing in for the page: the login banner arrives, typed input round-trips, and `stty size` reports the 100x30 the session asked for. The only untested link left is xterm drawing bytes it was handed. The WebView is de-risked on Windows, which was the plan's largest risk. Not by assertion: with the app running there is an established TCP connection from msedgewebview2 to the data plane port, so WebView2 launched, navigated to the loopback page, executed terminal.js, and completed the WebSocket handshake against the real token and origin checks. Linux remains unproven and the package's own release notes now corroborate the concern -- Linux uses a WPE backend, and it ships a NativeWebDialog described as useful where embedded WebViews may be unavailable. Two bugs found by building it, both of which would have shipped: - ShellStream.Write buffers and needs an explicit Flush. Without one a keystroke is accepted, reported as written, and never reaches the remote: the terminal displays output perfectly and simply stops responding to input. SSH.NET's own WriteLine flushes, which is why the earlier spike never hit it. Found by isolating the pump against real SSH and reading BytesRead=51 -- banner and prompt through, nothing after. - The Windows app manifest needs a supportedOS list, or Avalonia's native control host fails outright and the terminal never starts. Also fixed a genuinely flaky test I happened to catch: SyncCursorTests tampered with the *last* base64url character, whose low bits the decoder ignores when the input length is not a multiple of three -- so a tampered cursor sometimes decoded to identical bytes and verified. It failed roughly one run in thirty, depending on a random key. Now tampers the penultimate character, which is fully significant at every length; 40 consecutive runs are clean. xterm 6.0.0 plus the fit and webgl addons are vendored as UMD bundles rather than built with npm, so a clean clone needs only the .NET SDK. Provenance and licences are recorded next to them, along with the UMD global names terminal.js depends on -- a bundle that switched to ES modules would load without error and leave Terminal undefined. The renderer acknowledges output from term.write's completion callback, not on receipt. Acknowledging early would return flow-control credit for bytes the screen has not caught up with, which is the one thing the credit window exists to measure. TerminalWorkspace moved into DodoSSH.Client.Terminal: it has no Avalonia dependency, and having it there is what let the end-to-end test exist at all. 404 tests pass, zero warnings on a clean rebuild, format clean. |