cba6f435e95a80ad0283c048ba8cfc5b0c577a3e
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jaap-janandClaude Opus 5
|
16e0051e89 |
Draw the tags that have been storable and invisible since the domain landed
`Tag` has been a full item kind for three commits — a table, a migration, a codec, a merge, a cipher — and `HostSecret.TagIds` has merged per tag so two people tagging one host both keep theirs. Nothing drew a chip. The tags a client could store were ones nothing here could see. Chips on host rows, both heads, from names resolved through the tag list rather than ids: a tag that does not resolve is left out rather than drawn, because it means the tag was deleted elsewhere or belongs to a vault this session cannot read, and a host with one chip fewer is the honest answer where a host wearing a GUID is not. The id stays on the host, so the chip comes back if the tag does. The picker is chips that toggle, matching the chips on the row behind it. A list of names to tick would make the user match an entry to a chip they can see two inches away. The box under it creates a tag and puts it on straight away, because that is when a tag is usually wanted — while tagging a host and finding it does not exist yet. Unlike every other field in that editor it writes to the keychain immediately, since a host can only name an id that exists; cancelling therefore leaves the tag behind, which is honest rather than hidden. A name that already exists is used rather than repeated: two tags called "staging" are storable and must stay storable, because two people creating one offline is how it happens, but typing it into a box beside a chip of the same name is a slip. Renaming and deleting needed a home, or the picker fills with names nobody uses and never empties. That home is a TAGS category on the keychain screen, where every other item kind is managed — and renaming is the whole reason a tag is an item rather than a string repeated inside twenty payloads: it is one write, and no host is touched. The delete confirmation counts the hosts wearing it, which is the difference between a tidy-up and losing a filter somebody relies on. The desktop host editor now scrolls, and that is not a tidy-up. A picker's height is a chip per tag in the keychain, wrapped, so somebody with fifteen tags has an editor half again as tall as somebody with three; no fixed height holds that, and trimming other fields to buy room only moves the failure to whoever has sixteen. The layout suite caught it the moment its seeder grew tags — which is why the seeder now creates ten rather than three, enough to drive the pane onto its cap so the capped shape is what gets measured rather than one no real keychain produces. The cost is named where it is paid: the harness skips anything inside a ScrollViewer, so from here it certifies that pane fits the column rather than that every field in it does. Two smaller things fell out. Five buttons overflowed the keychain header by a few pixels, so GENERATE lost the word KEY — its tooltip carries what the word did. And TotalItemCount had been counting keys and credentials while ALL showed four kinds; it counts all five now, because a number under a chip that disagrees with the rows it opens is worse than no number. An adversarial review of this change found two defects it had introduced, both green against the full suite. NewTag filed into the "new items go to" picker while the tag list only ever holds the active vault's — so with a team vault selected a tag would be created, queued for push, reported as added, and then invisible, with no row, no count, no picker entry and nothing able to rename or delete it, because there is no active-vault switcher to go and find it with. The comment on the host editor's own create path states that exact rule; this was the one place that broke it, and NewObjectStore, whose list is likewise active-vault-only, already ignored the picker. And the tag editor was the only one of five that did not disarm a pending deletion when it opened, so arming a key's deletion and then pressing + TAG left a live DELETE for an item the user was no longer looking at, directly above the boxes they were typing into. Both are fixed, both have a test, and the first was checked against the broken version before being kept. The same review caught a doc comment that had been inserted between SnippetRowViewModel's summary and its declaration, silently taking it over. Verified by the whole suite on a clean build: 1413 tests over nineteen projects, none failing. Both heads build. The rectangles the layout suite cannot reach are phase 9 of docs/manual-checks.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
4925dcf179 |
Give the phone the + it was promised, and the editors behind it
Steps 5 and 6 of docs/adding-hosts-on-the-phone.md, which finishes it. The phone can now put things in a keychain rather than only read one. The floating + arrives three designs after it was first asked for. It was refused twice on the honest grounds that it would open an editor this head had not got — and that stopped being true when steps 1 to 4 landed. It raises a sheet rather than a form, because "add" on this screen has been two operations since groups existed: a host, or a group to file hosts under. Both editors are cards in the list's own row, swapped for the list rather than stacked over it, following SnippetsScreen and for the reason written there: a form on top of the list hides what it is about. There is still no dialog and no editor screen anywhere on this head. The port and username boxes may be left empty, and the greyed text inside each is what the host will actually use — following the group picker as it moves, so the form says what leaving a box blank will do rather than making it a guess. The back gesture gains a guard above the switch rather than a case inside it. An editor is not a screen and has no entry there, and it is strictly nearer: the sheet sits over the editor's own screen, so back lowers whatever is topmost before it considers moving between screens. A group editor needs a way in, and the phone draws no groups panel — so the heading in the host list gains a pencil. A + that adds groups with no way to correct one is the same strange thing to ship as one that adds hosts with no way to correct one, and worse: a group's defaults are what every host beneath it falls back to. Scouting step 6 turned up a bug worth more than the prose it was looking for. ReloadGroupsAsync read the active vault alone, which was a cosmetic limitation while a group carried only a name — a teammate's host showed under UNGROUPED and nothing else was lost. Since a group began lending a port, a username and a binding, the same omission silently dropped all three: that host would dial 22 as nobody while the machine is on 2222 as deploy, with nothing on screen saying why. The resolution map now spans every readable vault. The editable list stays narrow, because a row shown across vaults needs a vault id for rename and delete and two vaults may hold groups with one name — but the map needs none of that, since it is only ever asked what an id says. An adversarial review of this change found something I had written a comment denying. The + was a child of the outer Panel rather than of the list's row, so it anchored to the bottom of the screen and sat squarely over the new EDIT button and the lower edge of CONNECT — and because a Panel hit-tests its last-declared child first, tapping the right end of EDIT would have raised the add sheet. The comment beside it claimed it was in the list's row precisely so that could not happen, and manual-checks 8.1 names that exact failure. It is in Grid.Row 2 now. The same pass caught a connect bar that was disabled rather than hidden while its own comment said hidden, a scrim that would have flashed its default pressed chrome across the screen, a fab comment claiming an accent fill no other button had when Button.primary has it, and a back-gesture remark naming two view-model properties that do not exist anywhere in the repo. That last one came from this plan, which invented IsVaultsSurface and IsConnectionsSurface, and pointed step 6 at a ConnectionsScreen.axaml that has never existed. Both are corrected in the plan rather than quietly worked around, along with a fourth "groups are flat" site in README.md that step 1 missed. The phone's rectangles are not measurable and structurally never will be: the layout suite is net10.0, the Android head is net10.0-android, and Avalonia's application is a one-shot process global — so a second head cannot share the process even if the reference were possible. Everything the sheet and both editors bind to is shared and is tested headlessly here; the pixels go to docs/manual-checks.md phase 8, nine checks, which is where this project already sends what it cannot assert. Tags remain the one thing asked for that did not ship. Tag is a full item kind and TagIds merges, encodes and resolves, but no screen draws a chip or offers to add one, so the tags a client can store are ones nothing here can see. Both editors carry the set through a save untouched so a client that can set them does not lose them. Recorded as half-shipped in docs/design-import-gaps.md rather than quietly left out. Verified by the whole suite: 1402 tests over nineteen projects, none failing. Both heads build. Nothing seen on a display — phase 8 is what that costs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
b7335743d9 |
Make a host take what its group lends it, everywhere it is read
Step 4 of docs/adding-hosts-on-the-phone.md. The domain could resolve a host against its groups; nothing asked it to. This is the wiring, and it is mostly one change repeated: read the resolved host, not the stored one. TryBuildAuthentication and TryBuildConnectionRequest now take the resolved value beside the stored one, which is where group context was being lost. It is the only authentication resolution in the product — both heads and both transports come through it — so a host inheriting its binding would otherwise have been offered a password prompt on every screen at once. The credential-username fallback becomes three levels, and Complete still refuses an empty username, but now only after the chain has been walked; refusing before it would refuse exactly the hosts inheritance exists to serve. HostRowViewModel carries its ResolvedHost, resolved once when the list is built. Address, Authentication and Dialled read it, so a row cannot disagree with itself about what it dials — and MainWindowViewModel.Rank searches Address, so a host inheriting 2222 that displayed 22 would have been unfindable by the port it actually answers on. HostsBoundTo counts over the resolved binding, which is the difference between a warning and a silence: a key bound once on a group and inherited by twenty hosts named nobody, would have been deleted, and would then have refused all twenty at connect time. HostFields.From is answered by a refusal rather than by threading a group list through the sync engine. A relay host may not inherit its port. The reason is stronger than the convenience: a plaintext column is a derived duplicate the client supplies when it pushes *this* host, so an inherited port would make it depend on another item — editing a group would change what the relay dials for every host beneath it, except that nothing re-pushes those hosts, so the server would keep dialling the old port until each was next touched for some unrelated reason. A stale wire on the relay path connects the user to the wrong service. The editor distinguishes unset from explicit in both directions. An empty port box means "take the group's" and shows what that will be as a placeholder, following the group picker as it moves — a pre-filled 2222 would have been indistinguishable from one the user typed, and saving would have pinned it. The authentication picker gains a fourth entry, offered only to a host in a group, because for an ungrouped host it would behave exactly like the first. Which found a real defect while the tests were being written. Filing an ungrouped host into a group silently pinned it to a typed password: the picker had no "Inherit" entry when it opened, so it sat on "Password (ask each time)", and saving wrote that as a decision — the host would have been pinned to a prompt nobody asked for and the group's key would never have reached it. Two guards now: the picker is rebuilt when the group changes, and BuildHost writes AsksForPassword only for a host that had the alternative on offer. The group editor is here too, and the plan never assigned it a step. Without it no group can carry a default, so every line above would have been unreachable. It grows a parent picker that leaves out the group itself and everything beneath it — a courtesy rather than the guarantee, since a cycle assembled from two offline re-parents was never offered that list — and three defaults beside the name, each of which may be left empty because "lend nothing" is an answer. Tags are stored and not editable. TagIds merges, encodes and resolves; no screen can set one yet, and the editor carries the set through a save untouched so a client that can set them does not lose them to somebody editing a port. Eight new tests, and they dial. That is the point of them: a resolved value that never reaches SshConnectionRequest is a label, and every one of these failures would be silent — a host connecting to the wrong port, or being asked for a password it does not need, with nothing on screen admitting it. Verified by the whole suite: 1390 tests over nineteen projects, none failing. Both heads build. Nothing on the phone has changed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
8c04ba60b0 |
Build the three things the phone's + needs, before the + exists
Steps 1 to 3 of docs/adding-hosts-on-the-phone.md: the domain half. Nothing on either head has changed, which is deliberate — the plan orders these first because everything the editors will bind to has to exist and be merge-safe before a screen can offer it. HostGroupSecret gains a parent and four defaults, and the codec gains the version rule it never had. It stamped CurrentSchemaVersion unconditionally, which was harmless with one field and one version and stops being harmless here: upgrading one machine and renaming any group would have made that group uneditable on every machine still on the old build. It now emits the lowest version that loses nothing, so a flat group with no defaults still encodes at version 1, byte for byte, pinned against a literal. Tags become a real item over the reserved slot. Secret, codec, merge, cipher, repository, both registries, the EF entity and a generated AddTagItem migration. TagCipher names AadResourceType.Tag as a constant rather than casting the wire type, because Tag is 5 on the wire and 8 in the crypto enum and 5 there is Credential — a cast would seal every tag under the resource type for a password, encrypt and decrypt perfectly on the machine that wrote it, and only fail when another implementation refused the item, by which time the AAD is frozen into stored ciphertext. HostTag stays reserved and unused: the one thing the join buys over a set on the host is bought instead by merging TagIds per id. HostSecret grows TagIds and Port goes nullable, which is the change with the widest blast radius and the only one that loses an item rather than locking one. A host with no port of its own omits the property, an older build reads int Port as 0, and TryValidate refuses it — unreadable rather than read-only. That cost is confined to hosts which actually inherit, because the version is a maximum over the fields present; the alternative, writing 22 into every host, is the lie inheritance exists to stop telling. One decision the plan did not specify. "Three states where there were two" is four — key, credential, typed password, or the group's answer — and two nullable ids carry three. Naming neither id now means inherit, so AsksForPassword says "a typed password even under a group that lends a key" out loud. Only true is ever written and a decoded false folds back to null, so a host that never touched it encodes as it always did. Nothing already stored changed meaning: no group could lend a binding before this build, so every existing host resolves exactly as it did. HostInheritance is the resolver, and its visited set is load-bearing rather than defensive. Two clients can each re-parent A under B and B under A while offline; the merge sees one item against one item and the server sees ciphertext, so nothing upstream can refuse the pair. With inheritance the chain is walked at connect time, so an unguarded cycle is not an undrawable sidebar — it is a shell that never opens. Stopping at the first repeat degrades it to a group that reads as a root, and clearing the parent is the repair. A tag set turns out to be the one field on a host that can never ask the user anything. TagSet.ToIdMap keys by the value, so no key can hold two values, so the both-sides-moved-differently branch of the keyed merge is unreachable — asserted over the whole eight-row matrix. The conflict loop is kept anyway, because that proof is one edit from ceasing to hold and what it would cause is a discarded tag nothing records. Three guard tests failed by design and were fixed rather than relaxed: the ordered pull filter, the AAD pinning table, and the server's refusal of a plaintext parent — that last one survives with its reason rewritten, because the refusal now means "the parent is not the server's to hold" rather than "there is no such thing as a parent". The prose that said groups are flat is rewritten in all four places it appeared, not deleted. The five view-model sites that read Port directly now go through the resolver, which is a down payment on step 4 rather than the whole of it. HostFields.From still emits the stored port, and that is the one remaining place where an unresolved read would be a wrong wire rather than a wrong label. Verified by the whole suite: 1382 tests over nineteen projects, none failing. Both heads build. Nothing seen on a display, because nothing on a display has changed yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
jaap-janandClaude Opus 5
|
9629b7d938 |
Write down how the phone will add hosts, before it adds any
The + button the design has asked for twice needs three things that do not exist: a tag, a group's parent, and a group's defaults. Two of them are refused on the record — HostGroupSecret argues groups are flat, and the theme argues an unused style is a claim the control exists. So the plan goes in first, with the decisions and the reasons. Tags become a real item over the reserved slot, a host names them, and membership merges through ThreeWayMerge.Map rather than as a whole value, so two people tagging one host both keep theirs — which is what HostTag was going to buy. Group defaults inherit rather than copy, shown as the field's placeholder, which is what makes editing a group afterwards mean anything. A parent arrives with a visited-set walk, because with inheritance a cycle is no longer an undrawable sidebar — it is a shell that never opens. Also written down: that Port has to go nullable and everything that touches, the byte pin it will trip, and the schema-version branch whose absence would make an inheriting host unreadable rather than read-only on every client that has not been upgraded. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |