main
78
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jaap-jan
|
10f80bded1 |
Merge pull request 'Colour the window's frame, inset Hosts like its neighbours, drop Pins' (#9) from claude/title-bar-color-windows-6d386c into main
Reviewed-on: #9 |
||
|
jaap-jan
|
25407756c3 |
Look for a newer build the moment the application starts
The first pass of the update loop waited two minutes. Every pass after it came six hours apart, which is the right interval for a product that ships rarely — but the delay in front of the first one quietly excluded a whole way of using this application. A client opened to reach one host and closed again is over before the two minutes are. Used that way, it never checks at all: not once, not slowly, never. That is precisely the machine ADR 0011 names as the real cost of distributing outside a store — quietly a year behind — and the galling part is that the mechanism to fix it was switched on the whole time and simply never reached. The delay's own argument is recorded in the diff it is being removed from, and it was not a bad one: nothing anybody does in their first two minutes depends on an update, and launch is already contending for the network with a schema migration, a resumed sign-in and a first sync, at the one moment somebody is watching the window. What it weighed was the cost of checking early against the benefit of checking early. It never weighed the cost of not checking at all. ◆ THE YIELD IS WHAT KEEPS THIS OFF THE LAUNCH PATH, AND IT IS NOT DECORATION. Start() is called from MainWindowViewModel.StartAsync ahead of the migration, so an inline first pass would run whatever the channel does before its own first await — Velopack reads the install layout from disk — between the user and their window. Yielding hands the rest of launch back and puts the check in a later turn, which is the same moment in every sense anybody can perceive and none of the cost. So the answer to the delay's argument is not that it was wrong; it is that a yield buys most of what two minutes bought. Task.Yield takes no token where Task.Delay did, so the loop body now observes cancellation at its head. Without that, an application closed during launch spends its last moment asking a release channel about a build it will not run. Two things deliberately not changed. The AUTOMATIC UPDATE CHECKS preference still gates the pass — "on start" means every start, not regardless of what the user asked for, and that setting is already on by default. And the data cost is unchanged rather than merely acceptable: a check is a few hundred bytes and the download only follows if something newer exists, so this moves the same traffic earlier without adding any. That matters most on the phone, where the same loop runs against AndroidUpdateChannel. TheFirstPassRunsAtStart_RatherThanOnADelay drives the real loop rather than CheckOnceAsync, which is the one thing that file otherwise avoids — and here it is the point, because the claim is about when the pass happens rather than what it does. It waits on the pass and not on a clock, so there is nothing to be flaky about: a regression that puts a delay back does not fail on a margin, it spins until the suite's own cancellation ends it. DisposingStopsTheLoop keeps its assertion and gains a note that it is now a race rather than a formality. §16.7 of the manual checks gains the sentence that reopening the application does what CHECK NOW does. It is the step somebody following that section would otherwise discover by accident. 447 App tests and 153 layout tests pass. |
||
|
jaap-jan
|
cec73010d3 |
Colour the window's frame, inset Hosts like its neighbours, drop Pins
Three things one pass over the shell's chrome turned up, none of them related to the others beyond having been looked at together. ◆ A PALE STRIP ACROSS THE TOP OF THE WINDOW ON WINDOWS, and it is not this application's titlebar. Avalonia's Win32 backend gives a BorderOnly window WS_BORDER | WS_THICKFRAME and then calls DwmExtendFrameIntoClientArea with one-pixel margins on all four sides — read out of WindowImpl.UpdateWindowProperties in 12.1.1 rather than guessed at. So DWM owns a hairline of every edge and fills it with the system's caption and border colours, which follow the user's personalisation settings: with "show accent colour on title bars and window borders" on, that is blue against a near-black shell. Nothing in the visual tree painted those pixels, which is why nothing in the visual tree could cover them. NativeWindowFrame sets DWMWA_BORDER_COLOR and DWMWA_CAPTION_COLOR to the window's own Background, so the hairline still exists — the resize grip is on it, the drop shadow hangs off it — and cannot be seen. Deliberately not DWMWA_COLOR_NONE, which removes the border outright and leaves a near-black window with no edge at all on a dark desktop. Windows 10 gets the dark-mode attribute and nothing else, because the two colour attributes are Windows 11 and DwmSetWindowAttribute simply answers E_INVALIDARG there. Called from OnOpened, not the constructor: there is no platform handle until the window is shown, and calling early is a silent no-op — which looks exactly like a fix that does not work. Verified on screen on Windows 11. ◆ THE HOSTS HEADER SAT A STEP LEFT OF AND ABOVE EVERY OTHER SCREEN'S. Keychain, Snips, Logs and Pins all frame their content with Margin="26"; Hosts was on 16 a side and 20 on top. It is 26 all round now, stated per row rather than once on the root, because the board's ScrollViewer is deliberately full-bleed so that its scrollbar rides the pane's edge, and because a root margin would also inset the drawer, which draws its own. That cost the cards ten pixels, and the layout suite is what said so: TheHostsGridKeepsTwoColumnsAtTheMinimumWithTheDrawerOpen failed, because Border.tile's 224 was derived from the board's old 16-pixel margins and the grid quietly collapses to one column at exactly the size this application guarantees. 224 becomes 214, with the arithmetic in App.axaml rewritten — it had also gone stale in a way that hid itself, still citing the 1016 minimum and 190 rail from before v5b, whose two changes happened to cancel. ◆ PINS LEAVES THE RAIL, and only the rail. KnownHostsScreen is still built and still one click away, from "Host keys" on the Keys screen's own header, which was always the second way in. The row was kept through v5b on the grounds that the mock has no screen for approved host keys — a reason for the screen to exist, and never a reason for a rail entry once the keychain had a door to the same place. Two rows landing on one screen is a rail that has to be read twice. MainWindowViewModel.IsKnownHostsShowing stays: it names a real shell state and ShellFlowTests still asserts on it. design-import-gaps.md recorded that row as a deliberate deviation and manual-checks.md Phase 1.1 walked the rail entry by entry; both are corrected, and the manual check now reaches the screen the way a user would. The layout suite's rail row count moves from six to five with it. 153 layout tests and 446 shell tests pass. The frame is confirmed by eye; the Hosts inset and the rail are covered by the layout suite but were not seen running, because the instance launched to check them came up locked. |
||
|
jaap-jan
|
ca081af209 | Merge branch 'main' into claude/macos-build-release-2a8a0d | ||
|
jaap-jan
|
890a5f2246 |
Give the desktop a macOS head, signed from the first release
The same application, the same Velopack and the same two-phase person-run release as Windows, with four things forced to differ. Signing is a precondition rather than an improvement: Gatekeeper refuses an un-notarized download outright instead of warning about it, so there was never the "unsigned for now" that ADR 0013 decision 8 argues for on Windows, and release-macos.sh refuses to start without the identities. The packaging split is narrower than it first looked, and the old claim at the foot of ci.yml is why it was worth checking rather than assuming. vpk cross-compiles when told to: 'vpk [osx] bundle' builds a real .app on any platform, and CI now publishes osx-arm64 and bundles it on every main and tag build, which is what catches a restore graph with no macOS native asset. There is no '[osx] pack' off a Mac, and that part is correct — pack drives codesign, notarytool and stapler, which exist nowhere else. The dylib signing loop in the script looks redundant beside vpk's own pass and is not. vpk signs with 'codesign --deep', which is the shape Apple documents as wrong for nested code, and platform-flags has recorded a notarization rejection that names no file since before any of this existed. Signing each native binary inside-out first leaves that pass nothing to get wrong. MacDeviceKeyStore reaches ADR 0007's conclusion through different hardware: a P-256 key in the Secure Enclave under an access control requiring user presence, so the platform enforces the gate rather than this process — which is the whole point of that ADR's amendment. The enclave holds no other kind of key, hence ECIES where Windows uses RSA-OAEP, and the shape that falls out is better than the Windows one: sealing needs only the public half and is silent, so only unlock prompts. IsSupported probes rather than infers, because three ordinary Macs answer no — an Intel machine without a T2, one with no login password, and every unsigned development build, since enclave keys need a signing identity. Two decisions worth stating because they are reversible. arm64 only: a second channel is small work and nobody here has an Intel Mac to walk Phase 18 on, and an x64 package would be the only artefact in this repository reaching users unverified. And the pack id stays DodoSSH.Desktop even though vpk names the bundle after it, so /Applications holds DodoSSH.Desktop.app: decision 2's reasoning binds harder here, because a pack id of DodoSSH would put Velopack's install root on top of ClientPaths.DataDirectory and let an uninstall take the user's un-synced outbox with it. CFBundleDisplayName puts the product name back in front of a person. Measured rather than assumed, since none of it is obvious: the publish and the bundle were both run, LSMinimumSystemVersion is 12.0 because that is the minos in the apphost's own LC_BUILD_VERSION, and vpk copies a custom Info.plist verbatim with no substitution at all — which is why the plist is a template the script renders and not a committed file. What is not done is the half that needs the hardware. There is no macOS runner, so nothing past "it bundles" has ever run. Phase 18 is the whole of the verification, and the two checks most likely to fail are the terminal against WKWebView and the enclave interop, neither of which has executed once. |
||
|
jaap-jan
|
9bc9069425 |
Post the terminal's focus return past the dispatch that steals it
The first fix handed Android's focus back from inside the keys' Click handlers — which fire inside the UP event's dispatch, and Avalonia's own view requests focus for itself after every handled touch dispatch returns (AvaloniaView.DispatchTouchEvent, decompiled from 12.1.1). So the platform's request ran after ours and undid it microseconds later, which is exactly what the phone showed: the terminal still lost focus. The return is now posted onto the main looper, landing one message after the dispatch that stole, and it is wired at the row for both halves of a press — DOWN steals too, and Click only exists for UP, so a keyboard detached at DOWN would otherwise stay detached for the whole length of the press. Check 11.10a now also says what a tolerable blink looks like against a failure that stays. |
||
|
jaap-jan
|
e936ab4646 |
Announce a session's end when it is actually over, and for closes too
The phone's notification kept saying '1 shell connected' after the shell was gone, and both close routes were at fault. A shell exiting on its own raised SessionEnded from inside its run's finally block — where the run task is by definition not yet complete, so the LiveSessionCount the keep-alive reads still counted the dead shell, and nothing fired later to correct it. A tab closed by hand announced nothing at all, by a recorded decision that assumed every subscriber was the closer; the keep-alive is not, and a close it never heard about left the notification claiming a shell over nothing. The end is now announced from a continuation after the run completes, and CloseSessionAsync announces after its own drain — every subscriber was already a reconcile-to-reality handler, so the echo the old remark feared costs nothing. Shutdown stays silent: it is dismantling the subscribers along with the sessions. |
||
|
jaap-jan
|
506d2803a2 |
Hand Android's own focus back to the terminal after an accessory key
Focusable=false was only ever half the fix, and its remark now says so: Avalonia's focus stays on the NativeWebView, but the touch that presses a key still hands Android's native focus to Avalonia's input view — the platform moves it before Avalonia decides anything. The WebView's input connection dies with it, the keyboard swaps to its no-input layout, and the inset churn parks it over the very row that was tapped. Each key now returns that focus once its byte is on the wire, through a sibling of SoftKeyboard that walks the decor view to the one WebView this application has. Free when nothing moved. Check 11.10a is the phone-in-hand proof. |
||
|
jaap-jan
|
3f5979d639 |
Record the renderer-reattach correction and its phone checks
The port notes carry the third correction of this round: the data plane assumed a renderer that attaches once and lives forever, which no foreground service can make true of Android's separate WebView renderer process. Phase 11 gains the two checks a phone can run — close and reopen a connection, and a backgrounded shell surviving its renderer being killed, banner and all. |
||
|
jaap-jan
|
3977f68870 |
Record the keep-alive corrections in the port notes and the manual checks
The port doc's backgrounding decision now carries the four corrections rather than describing a wiring that was not true, and Phase 14 gains the checks a phone can actually run: a backgrounded shell surviving, an idle Files connection surviving, the permission ask arriving at the first thing worth showing, and a refusal costing the notification and nothing else. |
||
|
jaap-jan
|
dbf6ce1bcf |
Give the phone its pins: an editor section and chips on Files
The data was never the gap — HostSecret.PinnedPaths syncs and merges on both heads, and the desktop's drawer has staged it since v5 — the phone just had nowhere to add, remove or use a pin. Now it has both halves. The host editor page gains a QUICK ACCESS section over the same shared staging the drawer binds (EditorPinnedPaths, AddEditorPin, RemoveEditorPin), with the remove target at this head's 44dp touch floor rather than the desktop's 22-pixel close box, and no folder glyph because this head embeds no icon font for one. The page also gains a Status line of its own: the add command's five refusals speak through Status, and this page covers the screen that normally draws it — a refusal nothing shows is no refusal at all. The Files screen draws the connected host's pins as chips between the breadcrumb and the listing, each running GoRemoteCommand exactly as a crumb does. They are captured at connect, like ConnectedTo and the session facts before them; a bucket gets none, having no HostSecret to pin anything on. Covered headlessly in ShellFlowTests — connect populates, disconnect clears, a bucket stays empty — and by manual checks 8.18 and 8.19, whose phase preamble also stops claiming thirteen checks when it lists twenty-one. |
||
|
jaap-jan
|
009b35e069 |
Cover the mixed-keychain regroup refusal headlessly
The two-keychain branch of VaultViewModel.RegroupChosenHosts had no test: 7.6a's manual walk was the only thing asserting that a mixed set gets the sentence instead of the picker. A ShellFlowTests case now ticks a host in each of two vaults, reads the refusal off the status line, and shows the same command opening the picker once the set is one keychain's again. Check 7.6a cites the test and keeps only the popup wiring for the eye. |
||
|
jaap-jan
|
d32f5609e3 |
Rewrite checks 7.6/7.6a for the picker that replaced the drag
The drag onto a group card went with v5's flat sections; filing a set is the chosen-hosts menu's "Change group..." picker on both heads now. The two checks walk that route instead and say honestly what ShellFlowTests and ScreenLayoutTests already cover, what only a real popup can show, and that nothing automated raises the mixed-keychain refusal. The numbering preamble's example swaps to citations that still exist. |
||
|
jaap-jan
|
c59b517fdf | Record v5c in the design-import log, and true up the manual checks | ||
|
jaap-jan
|
422d5ca10e | Record v5b in the design-import log, and true up the manual checks | ||
|
jaap-jan
|
507cd9ff88 |
Choose more than one host card on the desktop, the way the phone already can
The chosen-hosts set has been in VaultViewModel since the phone's connect card became a contextual action bar: a set of entity ids, a tick on the row, and seven things that can be done to it. Only one head could fill it. The desktop's grid answered a press with one selection — the card the drawer, CONNECT and the context menu are about — so filing eleven imported machines under a heading was eleven drags, and clearing out a vault was eleven rounds of the deletion question. So the pointer gets three ways into the same set. Ctrl-clicks a card to tick it, Shift-clicks to tick the run between the anchor and the card, and drags a band out over the space between and below the cards to tick everything it touches. Esc, CLEAR, a plain click on a card and a click on the empty space each drop it, and Ctrl+A takes every card being drawn — VisibleHosts, so with something in the find box that is the ones on screen and not the ones it is hiding, which is the version of that shortcut whose result can be checked before Delete is pressed. TWO SELECTIONS ON ONE SCREEN, AND KEEPING THEM FROM DISAGREEING IS MOST OF THE CHANGE. Ctrl and Shift are answered on the tunnel and marked handled, so the ListBox never moves its own mark onto the card: a Ctrl-click that also selected would light the card it had just unticked and open the drawer on a machine somebody is removing from a set. A plain press drops the set unless it lands on a ticked card, and that case is deferred to the release, because the press may be the start of a drag of all of it. After any ordinary click exactly one card is in play, which is what makes every command on the screen unambiguous again. The context menu is where the seven live, and it is one markup with two halves gated on IsChoosingHosts. Connect, Browse files and Edit… are drawn only for a single ticked host, as the phone's sheet collapses them and for the same reason; the other four read better for a count. A right click on a card outside the set drops the set first, so a Delete… about the card under the pointer can never be offered while six sit ticked behind the menu — the same rule OnContextRequested has always enforced for the selection, reached from the other direction. No bar of buttons: the phone raises one because it has no other way to hold seven entries, and a strip repeating a menu that already exists would be a second home for the wording that matters most. What the desktop gains instead is a count beside the HOSTS heading, CLEAR, and a sentence saying where the actions are. A drag that starts on a ticked card carries every ticked card. The payload is a list rather than a row now, and a drop of more than one goes through FileChosenHostsUnder, which makes the refusals once — an open editor, and a group belonging to one keychain — and reports a count instead of forty status lines. Moving whichever card the pointer happened to be holding and leaving the other five where they are is a gesture that quietly does a fraction of what it looks like it does, and the five left behind look filed. The three panels the set's actions raise had never been drawn in a window: the vault picker with its key question, the group picker, and the deletion question. All three sit above the grid rather than over it, which is the arrangement the GROUPS section and the phone's list already use and for the reason written there — the ticked cards are the information the question exists to give, so the grid shortens instead. A DEFECT FOUND BEHIND IT, AND IT WAS ALREADY LIVE ON THE PHONE. The deletion question names a count and the run that answers it reads the set again, and nothing kept the two the same set: the panel is deliberately above a live list, so one more tick between "Delete these 6 hosts?" and pressing DELETE deleted seven, with the seventh named in nothing the user had read. It needed a deliberate act on a phone and a second's work with a band, which is what turned it up. VaultViewModel now remembers which hosts the question was asked about and drops the question when the set stops being them — the question rather than the set, because what somebody has just chosen is what they meant. It also covers the case nobody performs: a colleague's deletion arriving mid-question and shrinking the set under it. VERIFIED. 354 tests in App.Tests and 111 in App.Layout.Tests, build clean, no new warnings. Six gesture tests drive real pointer and key input through the headless window — the modifier click and what it must not do to the selection, the run and its re-measurement from the anchor, the band and the click that drops the set, Ctrl+A under a filter, and the menu's two halves — plus a DragOver carrying two hosts. Four layout tests measure the strip and the three panels at the window's minimum; the vault panel binds a key to its host first, or it would measure the short shape and certify the tall one. Two flow tests cover the multi-drop's write and its refusal, and the deletion question dropping itself. manual-checks gains 7.6a for dragging a set, which no test can see for the reason 7.6 gives, and 7.7a for the gestures — the rectangle actually being painted and the tick and the fill being legible together are the two things the harness cannot look at. |
||
|
jaap-jan
|
1e8a1f2e83 | Merge branch 'claude/trust-connect-popup-56abec' | ||
|
jaap-jan
|
4f9faa2fe3 |
Ask about a host key where the connection was made, not on the host list
The trust prompt was two banners at the top of the desktop's hosts screen, so the shell navigated there before letting a handshake raise one: Screen = Hosts, Surface = Page, in OnVaultConnectionFailed and again in the palette's own connect. The reason was sound — a connection can be started from Ctrl+K on any screen, and a question behind whatever somebody is looking at is a question nobody can answer — and it was answered the wrong way round. Rather than making the decision reachable from where the user is, it moved the user to where the decision was, and charged every screen for it. It is worst for the one connection that has no host at all. A machine typed into the phone's connect box is deliberately in no keychain, so a first contact from there judged it on a list it does not appear on, after taking the box that dialled it away. So both heads now draw the decision over the surface. HostKeyCard is the desktop's, and is the counterpart of the phone's HostKeySheet: a scrim with no press handler, because a question with two named answers must not be answerable by missing; the unknown key offering TRUST AND CONNECT, because judging a fingerprint against what an operator published is a decision a person is entitled to make and the only moment they can make it; and the changed key offering no way forward at all, because a button beside that warning is "continue anyway" with two clicks instead of one. The phone needed no new markup — its sheet was already a shell-level overlay, so deleting the navigation is what puts it over the Connections screen. IsHostKeyDecisionShowing is on the shell rather than on a screen because the answer decides an occlusion. A second connection can be refused while a first one is open, so this card is routinely raised over a live terminal, and that rectangle is a native child window: layered over it the card would be sliced at its left edge with TRUST AND CONNECT taking no clicks, which for the most safety-critical question in the product is the worst place for that class of bug to land. IsTerminalShowing gives the rectangle up instead. The banners are gone rather than copied. One prompt in two markups is two copies of the most safety-critical wording here, and the second is the one that goes stale. TWO DEFECTS FOUND BEHIND IT. VaultViewModel.RejectHostKey cleared only the pending key and never the mismatch, so the changed-key refusal had no working exit. That was invisible for as long as it was a banner nothing was drawn over — nothing was trapped, and the next attempt cleared it — and it was already live on the phone, where that refusal is an opaque full-screen panel whose one button runs this command: pressing it left the panel up over every screen the user went to next, including the host editor the panel tells them to open. TransfersViewModel.RejectHostKey has always cleared both; the vault's was the outlier. Its button said BACK TO HOSTS, which was wrong twice over, and now says BACK. And an assertion written for this change could not fail: the palette test asserted the renderer was collapsed in a scenario whose only tab had just been removed, so it was collapsed for want of a session whatever the occlusion rule said. It is gone, with a note pointing at the test that can fail on it. VERIFIED. 1580 tests, build clean, no new warnings, format clean. Three mutations each seen to fail and then seen green again: dropping !IsHostKeyDecisionShowing from IsTerminalShowing, caught by AChangedHostKey_CollapsesTheTerminalItIsRefusedOver; reverting RejectHostKey to clear one flag, caught by RefusingAHostKeyDecision_TakesItOffTheScreen(false) and by that same test; and dropping the two host-key arms from OnVaultPropertyChanged, caught by TheHostKeyDecision_IsAnnouncedToTheWindowWhenItArrivesAndWhenItGoes. That last one is the first test in this repository to watch PropertyChanged, and it is worth being the first: every other assertion about the flag reads it directly, and a direct read passes with the subscription deleted — while the card would never go away. The two layout tests moved with the prompts, from the hosts screen to the card. manual-checks gains 7.4a for the occlusion, 7.4b for getting out of a refusal and 11.7a for the hand-typed case, none of which a test can see; 1.5 and 7.4 are corrected rather than left describing a window that no longer moves. ONE ROUGH EDGE, DELIBERATELY LEFT. On the desktop, refusing a first contact whose tab was the only one leaves the terminal surface with no tabs — a blank rectangle under the strip's "no terminals open · press + or Ctrl+K", which is the one sentence near that rectangle Avalonia can draw. The alternative was falling back to the page, and on the phone that means the host list, which is the bug this commit is about. A desktop connect page would close it properly. |
||
|
jaap-jan
|
6d6edb02c1 |
Keep an open editor's pickers in step with the vault
The host editor's four pickers were snapshots taken when it opened, and the comment on EditorAuthenticationChoices said why: a picker whose contents move under somebody halfway through a form is worse than a list a minute stale, and only one editor could be open at a time anyway, so the only way to add a key was to close this one. The second half of that stopped being true when AHostEditorIsInTheWay was split from AVaultEditorIsInTheWay. The host editor is the Hosts screen's business and the keychain's editors are the Vault screen's; neither refuses the other now, which was the right split — it stopped three quarters of a screen going inert over an editor the user was not looking at — but it left the assumption those snapshots rested on false and nothing to notice. So the ordinary way of using the feature was the broken one. Somebody starts editing a host, finds there is no key to bind it to, goes to KEYS, makes one, and comes back to a picker that does not have it — with the fix being to throw the form away and start again. The same for a password, a tag, a group, and for a whole vault made on the Teams screen because the host being typed belongs to the team rather than to the person typing it: the vault they had just made for it was the one place they could not file it. RefreshOpenEditors refills whichever editor is open, and it hangs off ReloadAsync rather than off the twenty-odd commands that write to the vault. That is the choice worth stating, because it is what makes a sync count as well as a save: a key pulled from another machine reaches the open editor by the same path a key typed here does, and a place that wrote to the vault without refreshing the editor would be a bug nobody would find for months. What the old comment was protecting against is real, so every picker is put back onto what it was already showing, by id, and not one typed field is touched. An editor that reset its own bindings because a background sync landed would be a worse bug than the stale list this fixes — it would rebind a host as a side effect of somebody else's work. The placeholder entries go back too, which is the case 3.4 measures: a group deleted on another machine mid-edit still cannot unfile the host when the form is saved. The group editor gets the same treatment for the same reasons; it shares the drawer, and its default binding is lent to every host under it. The snippet editor's vault picker was the same copy of the same list and went stale the same way. It watches TargetVaults rather than the reload, because that screen has always been a wrapper over the vault's collections and has no reload of its own to hang off — which is how it already follows Snippets. The move panels are deliberately left alone. A vault arriving from a sync while one is open still will not appear in it, but a move panel is opened by the act that fills it and its picker resets its selection to the first entry on every rebuild, so refreshing it would move a destination somebody had chosen. Same class of bug, different answer, and not this change. Five tests, and four of them were checked failing with the RefreshOpenEditors call commented out: a key reaching the open host editor and binding when chosen, an item arriving without moving a selection that was already made, a tag arriving as an unworn chip, a key reaching the group editor, and a vault reaching the host and snippet editors without moving either. Manual check 7.12 sits beside 7.11, which is this same bug on the files screen's picker, and says what the worse failure would look like: a picker that moves rather than one that does not notice. |
||
|
jaap-jan
|
f1d6499bb5 |
Merge branch 'main'
Two of main's changes land in files this branch rewrote, and both needed carrying across by hand rather than by the merge. The phone's nav staying up on Connections with nothing running is a fourth input to RefreshChrome, which this branch had already given two more — whether hosts are ticked and whether the host editor is filling the screen. They compose: the rail and the bottom bar now ask (pages || connectPage) && !editing, so a page-shaped terminal surface keeps its way off the screen and the editor still takes the whole display. The key question under the host's move panel is the harder one, because this branch deleted the panel it was added to. The connect card is gone and the phone's only route to a move is the action bar, so leaving the merge to take this side would have removed a capability main had just shipped — silently, since nothing would fail to build. It is asked in the action bar's own picker instead, in two shapes fewer than the desktop's: one host, because which key to carry is a fact about one machine and a selection of six has six answers, and a move rather than a copy, because taking the key out from under an original that is staying put would leave that original unable to connect. BindingOfTheMovingHost splits into MovableBindingOf so both heads answer it the same way from different panels. Main also fixed a real trap in the same commit — a host that only inherited its key from its group arrived in the destination naming nothing at all, because the group stays behind — and the batch move had the same bug for the same reason. It goes through Detached now, which is where that fix lives. The carried host is written as the carry left it rather than being detached again, which is the one thing worth measuring: the key takes a new id over there, so a run that rebuilt the payload from the row would send the machine across naming a tombstone. Both directions are pinned, along with the rule about which shapes the question is asked in at all. |
||
|
jaap-jan
|
c882fa0cd3 |
Give the phone a selection instead of a card under the list
A long press on a host raised a connect card over the bottom of the list: a password box, CONNECT, EDIT, MOVE and DELETE. It was the right idea in the wrong place. It covered rows, it had room for five things and never a sixth, and every one of them was about exactly one machine — so filing eleven imported hosts under a group was eleven trips through a form, and there was nowhere to put a sixth action if anybody wanted one. A long press now chooses the host it landed on, and the actions move into a bar across the top of the screen, in the vault header's place rather than beside it. That is where Android has put them since contextual action bars existed, and it is the one strip a list can never grow into — but the real reason for it is that while it is up the screen is unambiguously about the ticked hosts and nothing else, which is what lets the count in the middle of it mean something. Left to right: the cross that leaves the mode, the count, the pencil, and a ⋯ holding Connect, Connect via SFTP, Move to vault, Copy to vault, Change group, Duplicate and Remove. A tap still connects and still raises nothing. Once anything is ticked it ticks and unticks instead, which is what every Android list does and is not merely a convention worth following: a tap that connected while five machines sat ticked would open a terminal on top of a selection somebody was halfway through building. Unticking the last host leaves the mode, so there are two ways out of it and the cross is only one of them. Both gestures now read the row from the element under the finger rather than from the list's selection, and that is a correctness change rather than tidying. A tap on a group heading moves the selection and the view model bounces it straight back to whichever host was chosen before — which answered "a host, or nothing" for free while a tap only ever connected. It stops answering it the moment a tap can tick one: the heading would tick a machine the user was not pointing at, into a set they are about to delete. Three of the seven entries are about one machine and are drawn only for one. A terminal, a file-transfer session and a form each have no reading over six, so they are collapsed rather than refused. The other four read better for a count than without one — it is the reason the set exists — and each of them says afterwards how many hosts it wrote and how many it left alone. Skipping beats refusing the whole run: a selection of eleven with one read-only row would otherwise do nothing at all and then report about the wrong ten. Copy to vault and Duplicate are new, and the difference between them is what each can safely carry. A copy crosses a key boundary, so it drops the group and the tags exactly as a move does — both are items of the vault being left, and a host arriving with either would point at something the destination does not contain, resolvable on the machine that sent it and dangling for everybody else. A duplicate stays in the same keychain, so everything it points at is still there and it keeps both. Change group is the write dragging a card onto a group already makes on the desktop, run over a selection; it refuses one spanning two keychains rather than half-filing it, which is the refusal a drop across that boundary already makes one host at a time. Connect via SFTP is the one action that leaves the vault. Which machine is a decrypted item and so is this object's business; the screen it leads to and the transfers view model behind it are the shell's — so it is an event, on the same division SessionOpened already draws for a shell. The host is re-found in that screen's own copy of the list, because the picker binds to rows in that copy and handing it the vault's object would select nothing. What is left of the card is the password box, and only because it had nowhere else to go: a host that authenticates with a typed password cannot be reached by a tap alone. That tap now raises a sheet rather than the bar, and the difference is that a sheet is up only while a question is on screen — the bar was raised by a long press and stayed, so it was a password box sitting over the list whether or not anything was being asked. Dismissing it empties the box, which is not tidiness either: a secret left behind would satisfy the emptiness check that decides whether to raise the sheet at all, so the next tap would dial with somebody else's password. The pencil moving into that bar takes the host editor with it. It was a card in the list's own row, under the search box and the sync line — twenty controls sharing a screen with two rows of chrome about the list it had replaced. It is a page now, and PhoneShell stands all four of its rows down for it, which is what "opens with all the options" means at 360dp. That needed a second subscription in that control: two of its flags are questions about the vault rather than about the shell, and the shell does not forward the vault's notifications. The ticks are held as entity ids rather than as rows, and written back onto the rows after every reload. Every row object in the list is replaced on every filter keystroke and every synchronisation pass, so a set of rows would empty itself once a minute under somebody choosing what to do with eleven machines. Ids that no longer resolve are dropped, so a colleague's deletion arriving mid-selection leaves a count that matches what is on screen. One caller had to change with it. ConnectToRecent opened the pane about a host, which was the desktop's drawer and the phone's card; the phone's answer is now a tick, and nothing on that list means "selected" any more — so arriving with the host merely selected would be arriving at a screen with nothing to press. Both are raised together, and the one the head in front of the user does not draw is inert. |
||
|
jaap-jan
|
69858f82d1 | Merge branch 'claude/vault-key-sync-sharing-d098aa' | ||
|
jaap-jan
|
185790fb14 |
Let a key move to another vault, and ask whether it goes with the host
Keys sync and keys are shared: SshKey is in the sync registry on both sides, the material rides in the sealed payload, and every generation of the vault key is wrapped to a new member. What was missing was the way in. Hosts and groups could move between vaults and keychain items could not, so a key typed into a personal vault before the team existed stayed there for good — and moving a host into the team's vault left it authenticating with something nobody else in that vault can read. The code said so and could do nothing about it: "the answer is usually to put a copy of that key in the destination vault", which meant pasting the private half into a second item and deleting the first. A private key on a clipboard, and two items nobody can tell apart afterwards. MoveAsync already existed on the generic repository and is now exposed for keys and passwords as it is for hosts and groups. What had to be built around it is the re-aim. An item re-sealed under another vault's key lands with an id of that vault's making, so every host bound to the old one and every group lending it as a default is left naming a tombstone — and a host bound to something its vault no longer holds refuses to connect rather than falling back to a typed password. A move without the re-aim would look like a success and break every machine on that key. It runs over every vault this session can write to, because a binding resolves across all of them, and it counts what it could not rewrite: an item from a newer client, or one in a vault this account may only read. Those are said in the sentence afterwards rather than swallowed. The host's move asks the question rather than deciding it. A binding resolves across vaults, so the moved host goes on working for the person who moved it whichever way this is answered; it is the colleagues they have just joined who hold one vault's key and cannot connect with a host whose key stayed behind. Unticked, and it stays that way on purpose: moving a key into a team's vault hands it to everybody holding that key, and this design does not default anybody into a disclosure. Under the box is the count of everything else that authenticates with that key, because a key twenty machines use is a different decision from one nothing else touches, and neither number is visible from the panel otherwise. The question is answered against the vault in the picker, so choosing a different destination re-asks it and a key already in the destination offers nothing. One thing fixed on the way. A host that inherited its key from its group arrived in the destination naming nothing at all — the group belongs to the vault it left — so a machine that connected before the move refused after it, with no sentence anywhere saying why. The resolved binding is now written onto the host as it crosses, and the stranded-binding warning reads the resolved binding too, which is the case where somebody is least likely to know a key is involved. MOVE is on both heads, for keys and passwords only: a tag, a bucket and a pin are read from the active vault alone, so "another vault" is not a question any of them has. Four tests cover the move and its re-aim, the host's move with the key brought and without it, and the inherited binding. |
||
|
jaap-jan
|
cddfeb1f55 |
Keep the phone's nav under Connections when nothing is running
The chrome stands down for a shell, and it was standing down for the whole terminal surface. Those parted company when that surface gained a connect page: with no tabs open it draws a box, a CONNECT button and the machines connected to before, which is a page in everything but which enum it is in. A third of the display is worth giving to a shell and is not worth giving to that. Worse, it is the one screen somebody arrives at by closing their last tab — so the state the collapsed bar was most likely to be seen in was the state where it left the system back gesture as the only route to Hosts or Settings. So RefreshChrome reads one more question. IsTerminalSurface with no tabs joins the pages in both flags, which keeps the rail and the bar in step: above 600dp the rail is the bar, and fixing only the narrow layout would leave an unfolded device on the same screen with the same nothing. The vault header is deliberately not part of it. The surface draws its own bar with back and the +, and a header above that is the second row of chrome this head exists to avoid. The Connections entry lights for the first time, on IsTerminalSurface. It was left unbound on the argument that the bar was never drawn while that surface was up, so a lit state was unreachable — that argument is now false, and the flag is unambiguous on a control that is only drawn in two situations: false on every page, true on the connect page, and never read while a shell is showing. A bar sitting under a screen it does not point at is the entry looking broken instead. Nothing here is testable on this head — the phone's rectangles have no coverage, for the reasons Phase 8 of manual-checks records — so 11.7 gains the check that the bar is there with Connections lit, and 11.1 keeps the one that it is gone with a shell up, which is the half that pays for the arrangement. |
||
|
jaap-jan
|
174ef7c420 | Merge branch 'claude/android-release' | ||
|
jaap-jan
|
af0e29a98b |
Give the desktop a nightly channel, the way the phone has one
ADR 0014 gave the phone a nightly and ADR 0013 rule 3 gave the desktop none, so the two heads had different answers to the same question — how does somebody try what is on main? — for no reason except the order the work happened in. This is the desktop's answer: CI publishes a build from main on every push, and it installs beside the release one rather than over it. The phone gets its separation from the platform. Android refuses an update signed by a different key, so its two channels cannot replace one another whatever anybody does. Nothing refuses anything here: Velopack applies what its feed serves and verifies no signature. So all of it is construction, and there are four separations because each closes a different door. A pack id each, so the two install in different directories and neither feed's package can be applied to the other's install. A Velopack channel each — win and win-nightly — so neither build ever reads the other's release index; the name reaches the wire as releases.win-nightly.json, which is why the constant in VelopackUpdateChannel and the argument in ci.yml have to agree or the channel answers nothing forever with no error. A prerelease flag, so the release channel cannot see the nightly even by accident. And a profile directory each, which is the one that is easy to skip and would hurt most: the cache schema is migrated on every launch, before unlock, so a shared profile means a nightly quietly upgrading a database the release build then opens. Both are installed at once by design, so that is an ordinary Tuesday rather than a corner case. The prerelease flag turns out to be load-bearing across heads as well. The phone's release channel reads releases/latest, which skips prereleases — so a desktop nightly published as a stable release would become the newest release in this repository and every phone on the release channel would start failing its check against a release carrying no Android manifest. Which build this is arrives as assembly metadata, the same mechanism and the same reasoning as the Android head: the updater needs the string rather than a branch, and a value baked into the assembly is one a crash report can be asked for. Three things read it — the feed, the prerelease flag, and the profile — and one more shows it: the titlebar says DodoSSH Nightly. Everything else that distinguishes the two is somewhere nobody is looking while typing a passphrase into one of them. The version needed a floor and it is applied to the whole build rather than to the packaging. MinVer answers 0.0.0-alpha.0.N until the first v* tag and vpk refuses anything below 0.0.1, so the job lifts the patch digit and keeps the height — through MinVerVersionOverride, so the assemblies carry the same number the installer does. Packing a version the assembly disagreed with would put one string on the preferences screen and another in the feed, which is the screen somebody reads when asked which nightly they are on. Two things found by running it rather than reading it. -t:MinVer needs a restore first, because the target arrives with the package and MSB4057 on a clean checkout reads like a typo in the workflow rather than a missing restore; the release script had the same gap and now restores before it reads. And vpk rejects an empty --packVersion loudly, which is how a broken version handoff announces itself rather than shipping a package called 1.0.0. Rule 3 is untouched. The release channel still has no job, no token and no runner, and the two channels cannot see each other. What a nightly costs is written where somebody reads it before installing one: whoever can write a release here can put a build on every nightly machine, which is fine for a build being tried and is not fine for a build holding somebody's infrastructure credentials. Verified by running the job's own steps against a clone in a Linux container: DodoSSH.Desktop.Nightly-win-nightly-Setup.exe, and an index naming pack id DodoSSH.Desktop.Nightly at 0.0.1-alpha.0.144. The upload itself is the one step not exercised — it needs a real forge and a write token, and check 16.10 is what walks the half no runner can. |
||
|
jaap-jan
|
ca7fee2358 |
Start the confirmation Android hands back, so an update can install
Pressing INSTALL closed the application, installed nothing and said nothing. That is two independent faults in one method, either of which breaks it on its own, and they hid each other: the first kills the process before the second can be observed, and the second is silent by construction. The pending intent handed to commit was implicit — an action string with no component behind it. A mutable pending intent may not wrap one of those from API 34, and this head targets 36, so every current phone threw IllegalArgumentException before commit was reached. Nothing caught it, so it left the command handler, passed the dispatcher and took the process with it. That is the closing. Below 34, where it did not throw, it still installed nothing. An application holding REQUEST_INSTALL_PACKAGES rather than the privileged INSTALL_PACKAGES gets no verdict back from a commit: what the platform answers first is STATUS_PENDING_USER_ACTION, carrying the activity that draws the dialogue in EXTRA_INTENT for the application to start. Android does not draw it on its own. The comment here asserted the opposite — that a pending intent is required whether or not anything listens, and that nothing needed to — so no receiver was ever written, and the session was written, committed and left staged forever. So there is a receiver now, not exported because the only sender is this application's own commit, and the intent naming it is explicit, which is the same change that stops the throw. Sessions are abandoned when anything fails, since one created and neither committed nor abandoned stays staged against a per-application cap — a repeating fault would have started failing at CreateSession instead, which is the same bug wearing a completely unrelated face. The reporting is the part worth keeping even after the cause is gone. Where applying ends the process an exception has nowhere to go; where it does not, which is this head's whole shape, it goes out through the dispatcher. RestartNowAsync now answers the way CheckNowAsync already did, and the regression test asserts the absence of a throw rather than the presence of one. ADR 0014 rule 6 gets the correction in place: "asks Android to ask" is one step longer than it reads. Check 17.5 needed no rewording — it asks for the installer appearing by name, which is exactly the thing that never happened — so what it gets instead is the two symptoms named, because both present as a dead button. It is the only thing in the project that can catch either, and it plainly was never run against a real pair of builds. Note for whoever takes the next nightly: a broken updater cannot install its own fix. The phone is running the code this commit replaces, so the first build carrying it has to be sideloaded by hand; the ones after that install normally. Compile-verified and manifest-verified — the receiver reaches the generated manifest — and 321 tests pass. Not run on a device, which is what 17.5 is for. |
||
|
jaap-jan
|
5cb361ea13 |
Lay the phone out like the desktop when the surface is not a phone
Three destinations in a bar and everything else behind SETTINGS is the right shape at 360dp, where a fourth entry costs the width of the three that are there. On a tablet, an unfolded foldable or a landscape phone it is the wrong one: there is room for every destination at once, and the hub becomes an extra tap between somebody and a screen they can already see space for. So at 600dp — Android's own boundary between a compact window and a medium one, in the density-independent units Avalonia lays out in — the bar stands down and PhoneRail takes the left edge with all nine on it. It is the desktop's NavRail arrangement rather than its file: the two heads cannot share a view, and this one draws the phone's destination set with the phone's palette and touch targets. The flags are computed in code rather than assembled in the markup because none of them is a single question any more, and Avalonia's bindings have no "and" — and the header's condition is an "or", which not even a wrapper can express. That header is the one worth reading twice: narrow it stands down behind SETTINGS, so the hub's screens can draw their own; wide there is no hub to be behind, so it stays up everywhere. Losing it on the keychain would be losing the only LOCK button on the surface. Removing the hub means removing the routes into it, and there were four kinds. The rail has no SETTINGS entry, because that screen is a menu of the rail. The five back arrows in the screens under it are hidden, since an arrow to a screen the layout removed is the one control on a header that leads nowhere. The system back gesture goes to Hosts instead. And unfolding while sitting on the hub moves to Hosts, rather than leaving somebody on a list of things now visible beside it. One bug fixed on the way: OnBodyResized returned early unless the keyboard was open, so a foldable would have opened to a phone layout until somebody typed something. The chrome is refreshed first and unconditionally; the early return belongs to the older job below it. What this does not do is use the width *inside* a screen — the host list is one column at any size. Two columns needs the row model to change, because that list is headings and hosts in one sequence and a heading has to span, and that model is shared with the desktop. Check 8.1 walks the rail; nothing here is covered by a test, for the reason 8.0 exists. |
||
|
jaap-jan
|
0c61ea3a97 |
Let a vault be shared from the phone, not only read there
This screen's own comment argued ADD out: an address typed into a box, a directory lookup, a role picker and a paragraph saying what adding somebody did not do, for an act a colleague at a desktop is already performing. That was a cost argument and it was wrong about who is holding what. The person who needs to let somebody into a vault is often the one away from their desk, and answering them with "go and find a desktop" is the thing this head exists to stop doing. Making a vault was already here on exactly that reasoning. Nothing shared changed — AddMemberCommand, the role and the chips are the same members the desktop binds — so what this is, is markup and the argument it reverses. Four rows under the members list: the box, three role chips rather than a picker because the answer is one of three short words, ADD, and the paragraph. Gated on being able to administer the vault, so a plain member sees nothing rather than a button whose only outcome is a 403. The paragraph is not the optional part. Adding somebody changes what the server will serve and nothing else; the key is still wrapped by a machine that holds one — which on an unlocked phone is this one, in the same press. A screen that offered the first and stayed quiet about the second would imply the server can hand out access, which is the single claim this product is built to refuse. What the phone still does not draw is anything that takes access away. REMOVE and WITHDRAW KEY act on the first press, and an irreversible revocation under a thumb with its explanation in a tooltip no touch screen can show is the wrong trade — which is the line this file already drew and this does not move. Check 12.4 walks it, including the locked-keychain case: the membership is made and the line says the key could not be wrapped, which is a state somebody can act on rather than silence. |
||
|
jaap-jan
|
dc1ebf6afa |
Let the recovery code be copied, and give the phone a clipboard to copy to
Both screens had made the code selectable and both said why: a person who cannot get it out of the box photographs the screen, and a screenshot is a worse home for it than a clipboard. This finishes that argument. Selecting 64 characters of letter-spaced monospace with a thumb is the version of "possible" people give up on halfway — and on the phone the screen blocks screenshots, so the honest remaining options were retyping it or losing it. It is the one secret this application deliberately offers to a clipboard, and the contrast with the keychain's copy is the whole argument rather than an inconsistency. There, copying the private half is refused outright, because installing a key means pasting the public one and the private one has no business leaving the vault. Here there is no better route: the code exists for one screen, is stored nowhere, and has to reach a password manager. The clipboard is the intended destination rather than a way round the design. The sentence afterwards matters as much as the copy, and is asserted: a clipboard is a staging post, this screen is the only place the code exists, and the next thing copied replaces it. Somebody who copies and does nothing has not saved it. The phone had no clipboard delegate at all — the desktop passed one and this head passed null — so COPY PUBLIC KEY on the keychain answered "this machine has no clipboard" on a device that plainly has one. Nothing about that was platform shaped: Android has a clipboard and Avalonia surfaces it through the same TopLevel. Wiring it fixes that copy too. The test fixture built its shell without a clipboard, which modelled the bug rather than the product, so it has one now and the public-key test asserts what lands there instead of the refusal. The refusal keeps its own test, on a shell built without one, because the view model reads the delegate's absence rather than an empty result — and because a button that silently does nothing on this screen is worse than one that refuses. |
||
|
jaap-jan
|
253c72d2b7 |
Name the organisation the repository actually lives in
It moved to DodoTech-Public, and every address in the product still said DodoTech. That looked like it worked, which is the part worth writing down: Gitea leaves a 301 at the old path and HttpClient follows a redirect on a GET, so both update channels would have kept polling through it. What a 301 does not survive is a POST. `vpk upload gitea` publishes the desktop release by POSTing to that URL, so the stale address would have failed at the one step the whole feature depends on — and a redirect is a thing an operator can delete, which turns "works today" into the same silent outage this session has already spent two commits on. So both channel constants, both release scripts, the workflow's REPO, the image's source label and the curl in phase 16 all name the live path. The local remote too, which had been printing a redirect warning on every push. Measured after the move: the org, the repo and the nightly release all answer 200 anonymously, and that release now carries both assets — the manifest and a 54 MB APK. The upload going through also answers the open question about the reverse proxy's body-size limit, which nothing local could test. |
||
|
jaap-jan
|
23f1db9dc8 |
Stop the terminal's accessory keys taking the keyboard off it
Ctrl, Esc, Tab, the arrows and the two text-size keys were ordinary Avalonia buttons sitting over a NativeWebView. An ordinary button takes focus on tap, which takes it off the WebView — and the package's own OnLostFocus then calls the adapter's ResignFocus(). So pressing Tab handed the terminal one byte and took the keyboard away from it, and everything typed afterwards went nowhere. What makes it worth more than a one-line fix is the symptom. The row goes on working, because its keys are pressed rather than typed into, so what you see is a terminal that answers the buttons and ignores the keyboard — which reads as the session having died rather than as anything to do with focus. Focusable = false is what a toolbar button is: these keys are an extension of the keyboard, not a place it should go. The focused element then never changes, so nothing resigns and nothing has to be handed back — which matters, because the hand-back is the direction platform-flags already records as the hard one. The flags file gains the phone's half of that entry, and check 11.10 is the measurement: this needs a paired hardware keyboard and there is no test on this head that could stand in for one. |
||
|
jaap-jan
|
33d4c3ff48 |
Check the organisation as well, because in Gitea the organisation wins
Setting the repository public changed nothing: /api/v1/orgs/DodoTech answers 404, and a Gitea org's own visibility gates everything under it — a public repository inside a Limited or Private org is invisible to anyone not signed in. So 16.0 now checks both, and says which answer means which. It also names the signal that tells this apart from an instance requiring sign-in for everything: /explore/repos answering 200, which this one does, so what is hidden is hidden on purpose rather than by policy. |
||
|
jaap-jan
|
e0655dbb31 |
Look the host list up by name, rather than off a field that is never assigned
Nightly 0.0.0-alpha.0.133 died before its first frame. The long press I added attached itself in HostsScreen's constructor through the field the Avalonia name generator declares for `x:Name` — and that field is assigned by the generated InitializeComponent, which no view in this repository calls. Every one of them loads its XAML directly. So the field compiles, resolves in the editor, and is null at run time; PhoneShell builds this control on the way up, so the NullReferenceException took the launch rather than the hosts screen. PhoneShell and TerminalScreen both use FindControl, and PhoneShell carries a <remarks> saying exactly this and naming exactly this consequence. I read neither and wrote the field. So the rule is in docs/platform-flags.md now as well. A comment on the control that already got it right is not where somebody writing a new one is looking, which is the whole of why two correct examples and one warning were not enough. And phase 8 opens with "it launches at all". Nothing on this head is covered by a test — no test project, no headless surface — so a view that throws while being built takes the launch with it and no gate anywhere says so. Thirty seconds, and it would have caught this one before it was published. |
||
|
jaap-jan
|
9a7e3bbd5c |
Let a failed update check say so, instead of reporting good news
The phone reported every build as current because the release repository is private. Gitea answers 404 rather than 403 for a repo you cannot see, the client reads that address anonymously, and AndroidUpdateChannel caught the failure and returned null — which IUpdateChannel documented as meaning "this build is the latest". The check had never once succeeded on any phone and nothing anywhere said so. Two faults, and the second is why the first lasted. The seam said null was the honest answer for an unreachable channel, on the reasoning that the caller does the same thing either way. That is true of the six-hourly pass and false of CHECK NOW. UpdateViewModel already draws the line correctly — silent on the timer, the exception's message on the button — and it could only ever draw the first half, because nothing was ever thrown at it. The desktop's channel does not catch, so the interface described neither implementation. So CheckAsync throws now, and null means one thing. A release that is reachable but missing its manifest or the APK it names throws too: "you are up to date" about a half-published feed is the same lie in a smaller costume, and the self-healing that argument protected is untouched, since the timer still swallows everything. The precondition is written down where somebody would look, rather than left as a sentence about where a token could live. ADR 0013 §4 already said a private release repository was incompatible with this design; nobody checked which side of it this repository was on. It is one curl, and manual-checks phase 16 now opens with it — pointedly not against /api/v1/version, which answers 200 from a forge that is up whatever is readable on it, and which is what made this look like nothing was wrong. Phone check 17.4 was the one that passed all along. It now presses CHECK NOW with the network off as well as on, because two different answers are the whole of what makes the first one worth reading. |
||
|
jaap-jan
|
ca07d63585 |
Offer to bring the keys an ssh_config points at
An import that recorded a key path and left every host asking for a password was an import whose result did not connect. The answer to that was a manual paste per key, which is the sort of thing people do once and then stop importing. So there is a tick, and it starts off. With it off nothing changes: an IdentityFile becomes a note and the host asks for a password. With it on, IMPORT reads each host's first IdentityFile out of ~/.ssh, stores it in the vault encrypted like any other key, and binds the host to it. Three things about how it is drawn are load-bearing rather than tidy. It is a default nobody arrives at by accident. The sentence beside it names the directory rather than saying "your keys", because that is what somebody is agreeing to. And nothing is read during SCAN — tick it, read what it says, untick it, and no private key has been opened. This is the only place the application opens key material out of a directory the user did not point at file by file, and the whole of what makes that acceptable is that it took a deliberate press. One vault key per file, however many entries named it: an ssh_config pointing twelve hosts at one id_ed25519 is the ordinary shape, and twelve copies would be twelve things to rotate and eleven to forget. A file whose material is already in the keychain is bound to rather than stored again, which is what makes running the import twice harmless. What cannot be read off a disk is a passphrase, so a protected key arrives without one — and the report under the button names those files rather than leaving a host to fail at connect time with a message about a malformed key. Telling them apart means decoding for OpenSSH's own container, whose cipher name is the first field inside the base64 rather than anything in the armour, and that is the format ssh-keygen has written by default for years. The 88 base64 characters it decodes need 66 bytes, not 64: with the smaller span every protected key came back unprotected, which the tests now pin. A path that is not on this machine leaves its host imported and unbound, exactly as it would have been with the tick off, and is named in the same report. A config carried from another machine is the ordinary case, not an error. |
||
|
jaap-jan
|
746711da9d |
Let a tap on the phone's host list mean connect
Choosing a machine raised the connect bar over the bottom of the list: a password box, CONNECT, EDIT, MOVE and DELETE. Five controls in the way of the one thing a tap on a machine's name obviously means. So the gestures split. A tap connects. A long press raises the bar, with all five. The pencil in the phone's header — its only persistent chrome — edits whichever host is chosen, which is the one of the five common enough to be worth a control that is always in the same place. The flag doing it is the desktop's own IsHostPaneOpen rather than a second one. That head made exactly this move when a selection stopped opening its drawer, and the question both are asking is "has somebody asked about this host" — answering it twice is how two heads come to disagree about what a selection means. One tap cannot finish: a host that authenticates with a typed password has nowhere on a list to be given one. That tap raises the bar with the box in it and says so, and a second tap with the box filled in connects. The branch is in the view model rather than in the head, because "can this machine be reached without asking for anything" is the same question the bar's own password box answers, and a copy of it in a view would be a second reading of a binding chain that has one. Two mechanics worth knowing. Avalonia raises Tapped on release whatever the press lasted, so a long press would open the bar and then connect — one touch firing both gestures — which is why HostsScreen tracks the hold and swallows the tap it precedes. And Holding only fires once IsHoldingEnabled is set, so that and the handler are attached together rather than one in markup and one in code. ConnectToRecent now opens the pane rather than selecting the row. On the phone it has to: a selection alone raises nothing now, so going back to a recent machine would land on a screen with nothing to press. |
||
|
jaap-jan
|
69bc9e270b |
Let a team be joined only by somebody who is already here
An invitation decided access from an assertion about an address. Everything else
in this model decides it from something a person did — an admin naming an
account, a key holder wrapping a vault key to a key they verified — and this was
the one place a token's email claim was the thing that let somebody in.
It was guarded as tightly as that can be guarded: the claim was refused outright
on an unverified or absent `email_verified`, with no setting to relax it. But the
guard and the risk were the same shape. The whole defence was one boolean sent by
a system the deployment does not control.
So `POST /teams/{id}/members` is the only way in, and an address with no account
is refused with `no-such-account` — which is now the end of the road rather than
the signal to invite. Both clients say the remedy: that person signs in here
once, which is what creates the account, and then they can be added. The desktop
leaves the address in the box, because a message telling you to come back later
is one you act on later.
Gone with it: the `team_invitation` table, the claim hook in the sign-in path,
and `Oidc:EmailVerifiedClaim`, which that hook was the only reader of. Nothing in
the server now reads the email claim to decide anything.
Pending invitations are dropped rather than converted. Converting one would mean
creating a membership because an address matched, which is the property being
removed — and an invitation to an address that did have an account here had
already been claimed by the hourly sweep, so what is left is offers to people who
never arrived.
Two tests carry the property rather than the feature: the endpoint inventory
asserts the three routes are absent, and the API suite adds an address that has
no account, watches the refusal, then signs that address in and checks it joined
nothing. Without the second half, a server that merely renamed the deferred path
would pass.
|
||
|
jaap-jan
|
b4a6c19ac1 |
Let the phone replace itself, and give CI a channel it may sign
The Android head had no updater and no release path, and the two are one problem: Android refuses an update signed by a different key, and CI generates a fresh debug key in every container. An APK released from a workflow could be installed once and never updated again — each new one an uninstall, which on this product means losing the cache, the outbox and the device key. So there are two channels, and they are two applications because the platform gives no third option. dev.dodotech.dodossh is cut from a v* tag by a person running scripts/release-android.ps1 with the key ADR 0011 rule 1 keeps off runners. dev.dodotech.dodossh.nightly is cut from main by CI and signed with a keystore committed here in the open — a key everybody has cannot be stolen and grants nothing by being held, which is why putting it in CI does not touch the rule. Neither can update the other, by construction. See ADR 0014. The android job assumed an image with a JDK and an Android SDK on it, which is what a GitHub runner is and what this project's is not. It now installs a JDK, fetches Google's command-line tools, accepts the licences and installs API 36 — each a no-op where it is already satisfied, and each cached by the persistent runner's own disk rather than by an action that would move a quarter of a gigabyte to rebuild a directory that never left. The client reads a small JSON manifest beside the APK, the counterpart of releases.win.json, and compares Android's versionCode rather than a version name: that integer is what the platform itself uses to accept or refuse an install, so comparing anything else would offer updates the phone then rejects. It fetches, and then asks Android to ask — the system draws its own confirmation, and from API 26 will not draw even that until unknown sources is on for this application. IUpdateChannel gained ApplyingEndsTheProcess. On Windows applying replaces the files and restarts, so the shell disposes the vault first and that is what zeroes the keys. On the phone the install is a request and the answer may be no, so disposing first would answer "not now" with a locked keychain and every shell closed — a punishment for declining an update. Two measured bugs found on the way, both older than this work and both invisible to a -getProperty check. ApplicationDisplayVersion is read by the Android targets in a top-level PropertyGroup, so the target setting it from MinVer ran after the only thing that reads it: every APK ever built here said versionName 1.0.0. And nothing found so far varies the launcher name per channel — four mechanisms tried, all of them recorded in platform-flags, none of them reaching the label the launcher shows. The two channels share an icon name for now and are told apart by package name, version, and what the preferences screen says. |
||
|
jaap-jan
|
50fa6fba38 |
Let the phone delete a host, and move or remove a group
The desktop gained three things the phone did not follow: moving a group to another vault, the second question asking whether a group's deletion takes its hosts with it, and — since long before either — deleting a host at all. What that left was a head whose v3 + can fill a keychain and whose editors can correct one, with no way to empty either. The commands could not simply be bound. DeleteGroup and MoveGroup aim at GroupTarget, which is the selected card or the open group, and the phone has neither: its list draws headings, and a heading's selection deliberately bounces back to the host. Called bare on that head they would have returned having done nothing — a DELETE that appears to have been pressed and has not. Both now take the row and fall back to GroupTarget for the desktop's menu, and ConfirmMoveGroupAsync resolves from the panel's own movingGroupId rather than from the selection, which is also the honester answer on the desktop: what moves is the shelf the panel was opened on. The heading's pencil became a menu. Three icons after a chevron, a name, a vault badge and a count is what would be left of the name at 360dp, so the ⋯ raises the add sheet's shape carrying Edit, Move to another vault, a rule, and Delete — the desktop's card menu, in the one idiom this screen already has. It does not carry Open: the desktop's grid holds one level of the group tree and this list holds all of it flattened, so there is nowhere to open a group into. DELETE under a host sits on a row of its own beneath EDIT and MOVE rather than beside them. A phone has no hover and no tooltip, so where a thumb lands is the only thing separating a destructive control from an ordinary one. Both questions take the controls that asked them — ShowsConnectControls, which is the phone's half of the rule ShowsHostPaneActions already carries for the desktop's drawer — so DELETE cannot be pressed a second time underneath its own confirmation. Preferences gained the running version, and the sentence saying this head does not replace itself and that no DodoSSH server will ever offer one. It reads Updates.CurrentVersion off the same view model the desktop's UPDATES section does, over the null channel that reports itself unsupported. Nothing was needed for the realtime push: it is composed in ServerConnection, which both heads use. Seven tests, all phone-shaped — a group acted on with nothing selected, the menu waved away leaving nothing armed, the ungrouped heading raising none, and the bar's three states. The rectangles remain unmeasurable for the reason phase 8 gives; the checks for them are 8.10 to 8.13 and 13.6. |
||
|
jaap-jan
|
3ead865f01 |
Merge branch 'main' into the desktop updater, and give way on two numbers
Main landed a realtime push feature while this branch was building the updater, and the two collided in three places. Every one of them resolves the same way: main got there first, so this branch moves. **Two ADRs were both numbered 0012.** Main's is realtime push; this one is now [ADR 0013](docs/adr/0013-desktop-distribution-and-updates.md). Git did not call this a conflict — the filenames differ — so it would have merged quietly and left the directory with two 0012s and every cross-reference ambiguous. Renumbered here along with the nine places that point at it. **Two manual-check phases were both numbered 15**, and that one git did catch. Main's "Changes that arrive without a timer" keeps 15; installing and updating the desktop client becomes Phase 16, with its checks and every reference to them renumbered. The file's own rule is that a number is for life, which is exactly why the one that had not been pushed is the one that gives way. **The merge rewrote several files with CRLF**, and `.editorconfig` asks for LF on everything except `*.ps1`. That is not cosmetic here: IDE0055 is an error and `EnforceCodeStyleInBuild` is on, so it failed the build on three lines of App.axaml.cs whose only change in this branch was an ADR number in a comment. Forty-six files normalised back to LF; the release script keeps CRLF, which is what `.gitattributes` and `.editorconfig` both already say for a PowerShell file. Nothing else conflicted. The updater does not touch the sync loop or the event stream, and the one file both sides edited heavily — MainWindowViewModel — merged without a hunk in common. Verified after merging: the solution restores locked and builds clean, and 304 shell, 100 layout, 54 session, 28 client-api and 25 contracts tests pass. The first two counts are higher than before the merge because main's own tests came with it and pass alongside these. |
||
|
jaap-jan
|
780f4bf892 |
Merge branch 'main' into the group's move and its deletion question
Main took the group's EDIT and DELETE off the GROUPS heading while this branch was adding a MOVE beside them, so the conflict was about the same six pixels from both directions. Main's answer wins outright, and it is the better one for the reason its own message gives: a button beside a heading has no card under a pointer to mean, and had to work its subject out from the selection or from the trail. Moving a group had that problem worst of all — the thing it takes with it is everything on the shelf, and "which shelf" is not a question a button there could answer plainly. So the MOVE button is gone and the menu entry it was drawn beside is the whole of it. That entry was already in this branch, above the separator DELETE sits below, and it needed no change: the card menu selects whatever was right-clicked before it runs anything, which is exactly the aiming a group move wants. Three things went with the button. ShowsGroupActions, which main deleted because hiding buttons was all it did, and which this branch had extended to hide them for the move panel as well. CanMoveGroupTarget, which existed to answer whether that button was worth drawing — CanMoveSelectedHost stays, because the phone really does leave the host's MOVE out rather than offer a refusal, and a menu whose entries came and went would be a menu whose items move. And the two test assertions that read them, which were describing the button rather than the behaviour; what they were guarding is that the two panels never share the moment, and IsConfirmingGroupDeletion says that directly. The move panel and the deletion question both keep their place under the heading, which is where the buttons were and is now simply where that section puts things. They still exclude each other, by disarming rather than by a visibility flag: MoveGroup clears a pending deletion and DeleteGroup folds the move panel away. Manual checks 3.3 was rewritten by main for the menu and by this branch for the tick, and now says both; 3.3a is new and walks a two-level shelf across a vault boundary, which is the half of this feature no headless test can watch land. |
||
|
jaap-jan
|
6728a0a597 |
Let the desktop client replace itself, and give the repository one version
Packaging for Windows, and the updater that only exists once something is
packaged. Velopack, win-x64, fed from the project's own forge — never from the
deployment a client signs in to, which is ADR 0011 rule 2 carried over
unchanged and is why the feed address is a constant in the code rather than a
setting. See docs/adr/0012-desktop-distribution-and-updates.md.
**Nothing is ever installed while somebody is using it.** A newer build is found
on a six-hourly pass, downloaded in the background, and then waits — for a
restart the user presses, or for the next launch they were going to do anyway.
That is a policy rather than caution: this application argues at length that
locking keeps shells running, because a lock that destroyed work would stop
being used, and a restart does not keep them. Having taught that, it owes the
user the choice at the one moment it stops being true, and the sentence saying
so counts the shells it would close.
**The version is now derived from the v* tag**, by MinVer, for everything. There
was no version before this — no property anywhere, so every assembly reported
the SDK's 1.0.0 and the API served that string as its serverVersion to every
client that asked. The tag was already the version of record for the container
image; this makes it the version of record full stop. MinVer's failure mode is
answering plausibly rather than failing, and here a wrong version is a client
that never updates, so it is guarded twice: fetch-depth 0 on every checkout, and
a step that fails a tag build when the tag and the computed version disagree.
**The pack id is DodoSSH.Desktop and not DodoSSH**, which is the one decision
here that would have destroyed data. Velopack installs to %LOCALAPPDATA%\<packId>
and removes that whole directory on uninstall, and %LOCALAPPDATA%\DodoSSH is
where ClientPaths keeps the encrypted cache, the outbox of changes not yet
pushed, and the device key. The obvious id would have had the uninstaller
silently delete work the server has never seen — the thing the application
refuses to do without a counted confirmation. Velopack's own advice to move user
data to roaming %APPDATA% is declined for the reason ClientPaths already gives.
**Releases are cut by a person, and CI gains no job that could.** The tempting
argument is that a forge write token is not a signing key. It does not survive
contact with what the token does: Velopack clients trust their feed and do not
verify a package signature when they apply one, so whoever can write a release
can ship an update every install runs. That is the capability ADR 0011 rule 1
puts on a machine which is not a runner, reached through a different door. The
mechanical objection — vpk needs Windows and the runners are Linux — is the
smaller of the two and is recorded beside it, because somebody will fix one and
believe they are done.
Unsigned for now, deliberately and with the cost stated where a user reads it:
SmartScreen warns once per person, on Setup.exe, because Mark-of-the-Web is
applied by the browser that downloaded it. In-app updates are fetched by the
application and applied from a local file, and never trip it.
The banner is a fourth row of the window rather than an overlay. Anything drawn
in the terminal's rectangle is sliced by the native child window that composites
above it — the defect this window has shipped once — and a sibling row is the
arrangement TitleBar and StatusBar already prove works.
----
Three defects surfaced on the way, none of them in the feature being built.
**A settings key absent from the file came back as the CLR default, not the
declared one.** The JSON source generator builds a record through a synthesised
parameterised constructor and assigns every property from its argument array, so
a property initializer runs and is then overwritten by a default for anything the
file did not contain. A settings.json of {} read back a font size of 0, clamped
up to the 8px floor rather than the 13px the renderer draws at. It could not bite
while there was one setting, because that setting was written on every save and
so was never absent; adding a second would have turned automatic update checks
off for every existing profile, silently, the opposite of the documented default.
Reflection-based deserialisation of the same JSON answers correctly, which is why
every way of checking it by hand agrees except the one that ships. The defaults
now live on the constructor parameters, which is the only place the generator
reads them from.
**Declaring a RuntimeIdentifier on the desktop head broke the server's image
build.** It is the obvious way to let a self-contained publish restore under
locked mode, and it writes a net10.0/win-x64 target into the lock file of every
project the head references transitively — including DodoSSH.Contracts and
DodoSSH.Crypto, which the API builds too. The Dockerfile restores those with no
RID and fails NU1004. Found by running docker build rather than by reading. The
RID stays out of the committed state; the two commands that need one ask for it
unlocked, and the release script puts the lock files back.
**A Docker ARG named VERSION silently sets MSBuild's Version.** An ARG is an
environment variable for the rest of the stage, MSBuild reads environment
variables as properties, and property names are case-insensitive. With the
workflow passing main-<short sha> on a main build the publish died with
NETSDK1018 pointing at DodoSSH.Contracts, a project nobody had touched. The build
stage's argument is ASSEMBLY_VERSION now, empty except on a tag build.
All three are in docs/platform-flags.md, which is where the next person will look.
----
Verified: the whole solution builds and restores locked; 289 shell, 93 layout and
54 session tests pass, including the regression test for the settings defect and
a measurement of the banner at the window's minimum width. vpk pack runs end to
end and reports "Verified VelopackApp.Run()" against Program.Main. The API image
builds correctly both as a main build and as a tag build, carrying 1.0.0 and
0.1.0 respectively.
Not verified, and it needs a published release to be: installing, updating and
uninstalling on a real machine. That is Phase 15 of docs/manual-checks.md, and
the pack id and the WebView2 profile fix are reasoned and commented but only
proved by walking it. Two things to watch at the first upload — the reverse
proxy's body-size limit for a 64 MB asset, and whether vpk upload gitea is happy
with Gitea 1.27.1.
|
||
|
jaap-jan
|
6fad84c484 | Merge branch 'claude/remove-group-edit-delete-buttons-3d38ec' | ||
|
jaap-jan
|
d02d103569 |
Take the group's EDIT and DELETE off the heading row
A pair of buttons sat at the end of the GROUPS heading, and the card's own right-click menu arrived later offering the same two things. Two controls for one job, and the buttons were the harder of the two to read: a button beside a heading has no card under a pointer to mean, so it had to work its subject out — the selected card, or failing that the group the trail ends with, which once a group is open is not a card on screen at all. The menu never has that problem, because opening it is what aims it. The menu is the whole of Edit and Delete on the desktop now. ShowsGroupActions went with the buttons, since hiding them was all it did. GroupTarget stays: the menu's two entries read it after the code-behind has selected whatever was right-clicked, and its fallback to the open group is what makes + NEW HOST open on the group somebody is standing in rather than on none. One case changes shape. Opening a group with nothing inside it folds the card grid away, so from in there nothing can be right-clicked — renaming that group means pressing the trail back one level, to where it has a card of its own. The buttons used to cover it through the fallback. The trail was already the way out of an empty group, and 3.2a says so now. The test that pressed EDIT through its binding is replaced by one holding that no button on the screen commands either of them, which is the failure worth catching: a button coming back is not a compile error, and it would draw itself in place, aimed at the group the trail ends with. What that test covered — a command that has to accept an empty parameter, and act on the card the pointer was on — the two menu tests beside it already do. |
||
|
jaap-jan
|
589300253d | Merge branch 'claude/vault-realtime-push-d64c61' | ||
|
jaap-jan
|
4b706bc3c3 |
Say when a vault has moved, so nobody waits out the minute
The delta pull was cheap enough to run on a timer and the client did, once a minute. That is fine for a machine and wrong for two people: an edit a colleague makes is up to a minute stale, which is long enough for both of them to make it and produce a conflict neither needed to have. Shortening the interval is the obvious answer and the wrong one — it costs a request per client per interval whether or not anything happened, and it converges on a busier server that is still late. So the server now says so. A client holds a WebSocket open at GET /api/v1/events, subprotocol dodossh.events.v1, and gets a line down it when something it can read has changed. ADR 0012 has the reasoning; three parts of it are worth repeating here, because they are what everything else rests on. **What crosses the socket is a notice, never data.** A frame names a vault and how far its change log has got. No item, no ciphertext, not even which item it was. The client's answer is the delta pull it would have run anyway, so there is still exactly one code path that applies a change to a keychain, and it is not this one. Pushing the items themselves would save a round trip and fork that path in two, with the cursor, the merge and the tombstone rules duplicated across both — ADR 0003 put every mutation through one write path for that reason, and this keeps every read on one for the same one. It also makes a dropped notice harmless, which is what lets the fan-out below be as simple as it is. **Polling stays, and is what guarantees a pass.** The minute timer is unchanged. A network that eats WebSockets, a server with Events:Enabled off, an older server, a proxy that will not upgrade, a notice dropped under backpressure — every one of those leaves a client behaving exactly as it did before this commit. Nothing is reachable only over the socket and nothing is meant to become so; VaultViewModel's AutoSyncInterval remark now says that where somebody changing it will read it. **The bearer token authorises the upgrade, unlike the relay's ticket.** Not an inconsistency with ADR 0004: the relay's socket is a byte pipe whose whole authorization decision — which host, which IPs, which port — is made before it opens and never revisited, and it is the extraction seam for a process that must hold no ACL code. This one is a view of the caller's own vault list and has to keep answering "what may this account read" for as long as it is held. A ticket would carry that answer in a token and be wrong the moment the account's access changed. The two bounds that arrangement needs are met rather than waved at: the socket is closed at the token's exp with close code 4401 and the client comes straight back with a fresh one, and the vault set is re-resolved every few minutes as well as on the changes known to affect it. Both bound *metadata*, because a notice contains nothing else and reading a vault still needs a key this server has never held. **The fan-out.** VaultEventHub is a singleton holding the sockets this node accepted; publishing walks them and asks each whether it cares, rather than keeping a vault-to-subscriber index that every re-subscription would have to move entries between under a lock publishing also takes. At a few hundred sockets per node and an event rate bounded by how often people edit keychains, the walk is not measurable and its races are obvious. Per-connection queues are bounded and drop the *oldest*: a notice means "pull vault X, which is at least at sequence N", so the newest subsumes what it displaces and the client's answer is identical either way — which is what lets the publish path be void, never block, and never fail. Announced from the endpoint rather than from SyncService, and that placement is the point: by then the push has committed and released the per-vault advisory lock. From inside it would name a sequence no reader can see yet and would hold the lock that serialises writers across a socket write. Only the highest *applied* sequence, so a batch of pure conflicts announces nothing, and a duplicate — already announced when it first landed — announces nothing either. Grants and membership publish too, and those take the *recipient* rather than the actor. This is what AdmitNewVaultsAsync has been apologising for since sharing shipped — "the recipient is handed nothing, there is no push channel" — and the README with it. A vault shared with somebody now turns up as it is shared. The comment and the README paragraph both say what is true now, and both keep saying that the pass is what *discovers* the vault, because a client with no socket has to arrive at the same place. **On the client**, VaultEventStream is really a reconnection policy wrapped round a ClientWebSocket: a dropped socket is the ordinary case here — laptops sleep, proxies time out, tokens expire, servers are redeployed — so nothing in it treats a failure as exceptional, and every path ends in "wait, then dial again". A connection that lived long enough to say hello resets the backoff, so a laptop that woke, worked, and lost its network an hour later does not inherit a minute-long wait it has already proved it need not take. A 4401 close skips the backoff entirely and asks the token provider again, which is the whole reason that close code is distinct. A server that does not advertise the events feature gets IdleVaultEventStream, which never delivers — so IVaultServer.Events is never null and every caller stays on one shape, because the correct behaviour without a socket is the behaviour with a silent one. The shell's background loop now selects between the timer and a notice, and both waits are held across iterations. That is load-bearing rather than tidy: PeriodicTimer permits one outstanding WaitForNextTickAsync and throws on a second, and an abandoned channel read stays registered and consumes the next notice written. Either defect leaves the first notice working and every one after it silently lost, which is why NoticesKeepWakingTheLoop_NotJustTheFirst pushes three and not one. Notices are coalesced over a quarter of a second, so one person's save — a host and its log entry are two items — and a colleague clearing a folder each cost one pass rather than a dozen. **The kind is a string, not an enum**, and that is a compatibility decision. UseStringEnumConverter throws on a value it does not know, so a newer server sending a kind an older client had never heard of would not add an unreadable frame — it would break that client's socket outright. A string is ignored instead. ProblemCodes is the same shape for the same reason. **Tested on both sides, through the real pipeline.** The endpoint suite opens a genuine socket against TestServer and proves a push produces a notice, that another account's push does not reach it, that a ping is answered, and that a frame this server cannot parse does not end the connection. Two of those assert on *ordering* rather than on absence within a timeout — the stranger's write goes first, so a socket that leaked would have announced it before the one the test waits for — because "nothing arrived in two seconds" is a test that passes on a slow machine for the wrong reason. And ANoticeCarriesNoCiphertext asserts on the bytes that crossed the wire rather than on the record's fields, since the latter would only prove that this type has no payload member, which is a tautology; the former is what catches a field added later without anybody thinking about disclosure. The client suite drives VaultEventStream through an injected connector, because the one thing a test cannot do to a real network is make it fail on cue — and failure is the entire subject. The shell suite proves a notice produces a pull inside ten seconds against a sixty-second timer, so the timer cannot be what caused it. **Two limits, stated rather than left to be discovered.** Fan-out is in-process, so a deployment running more than one API replica only pushes for writes its own replica handled and the rest arrive on the timer. IVaultEventPublisher is the seam a PostgreSQL LISTEN/NOTIFY backplane implements and it is deliberately not implemented: an untested backplane is worse than a documented gap, and multiple replicas degrade to the behaviour before this commit rather than breaking. And a client is notified of its own writes; it pushed, so it already pulled, and the extra pass finds nothing. Suppressing that echo correctly needs a per-device identity on the socket, and the same user's other machines must still be told. Manual checks phase 15 covers what no test here can reach, which is the network in between: a proxy that will not upgrade, one that drops an idle socket without telling either end, a laptop lid, a token expiring. Every one of those is invisible inside a test host, and every check there passes only if the change arrives quickly *and* still arrives with the socket taken away. ADR 0012 also fixes one thing about the shared terminal session this is the transport for, so it need not be renegotiated later: session data will be binary frames on this same socket, because base64 in a JSON envelope is the wrong shape for the one payload here that is continuous rather than occasional. Two questions it explicitly does not answer by implication — whether those bytes go through the API at all, and what end-to-end encryption means when the second party watches a stream rather than holding a key — are ADR 0001 questions and get their own decision. 1512 tests pass. DodoSSH.SystemTests was not run — it needs the whole compose stack — so the end-to-end path is unverified for this change beyond what the manual checks describe. |
||
|
jaap-jan
|
0258ec3029 |
Merge branch 'claude/groups-vault-sharing-e4b154'
# Conflicts: # src/DodoSSH.Client.Shell/ViewModels/VaultViewModel.cs |
||
|
jaap-jan
|
c39df3f51e |
Share the shelf as well as what is on it, and ask a group which vault
A group is where hosts are filed and what lends them a port, a username and a key, and until now it could only ever be made in the vault this machine files new items into. So sharing a vault shared the machines and not the arrangement: a colleague opened four hosts filed under a group they could read the name of and nothing else, and the group a teammate made had no card, no heading and no way to be corrected from the screen looking straight at the hosts inside it. Recorded as half shipped in docs/design-import-gaps.md, and this is the other half. The list stopped being the active vault's. It was narrow for two stated reasons — a row shown across vaults has to carry which vault it lives in, because rename and delete both need it, and two vaults may hold a "production" each, which a layout with one heading per group cannot tell apart — and both are now paid for rather than avoided. Every row carries its vault, the badge beside the name says which, and the two cards sit side by side saying what they are. The three shapes of the group read are now deliberately different sizes. The list is what a person looks at, so a hidden vault's groups leave it: a card that cannot be opened onto anything is worse than no card. The per-vault lists are what a picker offers, because a picker is always asking about one vault. The map is what a host's GroupId resolves through, and it stays widest of all — including over hidden vaults, since a group lends a port and hiding a vault must never change what one of its hosts dials. RebuildGroups is the one place hiding is applied, which is what keeps those answers apart. The editor asks which vault on the terms the host editor's picker set: while adding only, hidden where there is one writable vault, and never offered afterwards, because the two are encrypted under different keys and moving an item is a delete and a retype. Its parent picker is that vault's alone, for the reason the host editor's group picker is one level down — a parent in another vault is a level half the key holders cannot resolve, and their hosts would inherit from nothing. + NEW GROUP inside an open group departs from NewHost and takes that group's vault rather than the standing preference: a group made inside another is in its parent's vault by construction, and answering "inside PLATFORM" with a group elsewhere and no parent would drop the one thing the button said. Two smaller things follow from the cards spanning vaults. Dragging a host onto a group card in another vault is refused with both names, because the write it would make is exactly the id-nobody-can-resolve the host editor's picker was fixed to prevent, and treating it as "no group" would unfile a host somebody was plainly filing. And a group being renamed says its vault in the drawer's header, since the picker is not drawn for an existing one and renaming a colleague's shelf without being told whose it is is the edit most worth naming. The save target is a nullable field behind a property that falls back to the standing preference. The group name box is bound whether or not anything raised an editor over it — that is what the desktop's group bar was, and typing a name into it and pressing ADD is still a way to make a group, which would otherwise have written to no vault at all. 1575 tests pass, five more than before: a group filed into a shared vault is listed and renamed there, the editor's picker does not move the keychain screen's, the parent picker offers only its own vault, a cross-vault drop is refused, and hiding a vault takes the cards without changing what its hosts dial. |
||
|
jaap-jan
|
be012585b3 |
Let a group be right-clicked, as a host already can
The host cards have had a menu since the grid replaced the sidebar; the group cards above them had a double-click and two buttons beside the heading, and nothing that named the card under the pointer. Open, Edit and Delete are on them now, drawn and aimed the same way. On the list rather than in the item template, for the reason the host grid's is: the three commands are the vault's, and a ContextMenu inside a DataTemplate has the row for its data context, so every binding in it would silently resolve to nothing. The code-behind selects whatever was right-clicked before the menu opens, and that is what makes one menu act on the card under the pointer rather than on whichever was selected before. **Cancelled over the space around the cards, and here that guard is doing more than the host grid's.** GroupTarget falls back to the group whose contents are on screen when no card is selected — the right answer for a pair of buttons beside the heading, which would otherwise have no subject the moment a group with nothing inside it is opened, and the wrong one for a menu that opened on a card. Without the guard, right-clicking the gap beside the cards would offer to delete the group the trail ends with: a question about something the user is not pointing at, in the one menu where the answer is a deletion. Only Open takes a parameter, and it has to. OpenGroupCommand's null is a real argument rather than a missing one — it is the trail's first crumb, ALL HOSTS — so an entry with no parameter would not open the card, it would leave the group the user right-clicked and go back to the top level. Two tests beside the two the host menu already had. What they hold that a build cannot is the CommandParameter binding: a path that resolves to nothing compiles and draws, and the entry would then quietly do the opposite of what it says. The popup itself is still the platform's, so manual-checks 7.9 gained the group half of the same check. |