Give the file listings' columns their content back

The columns in both panes were fixed pixel widths, and measuring them against what they actually draw found them wrong at both ends of the range this screen gets. ◆ MODIFIED WAS TRUNCATED AT EVERY WIDTH THE APPLICATION HAS EVER BEEN DRAWN AT. It prints a sixteen-character timestamp, which needs 116 pixels, and it had 52. On a maximised window that read "2026-08" beside a NAME column with four hundred empty pixels in it. PERMS needs 60 for a ten-character mode and had 48; SIZE needs 58 for "999.9 GB" and had 56. ◆ AND AT THE SESSION SHELL'S OWN NARROWEST, NAME MEASURED ZERO PIXELS. Twenty for the glyph plus 56+52+48 for the numbers is 176 of the 180 a row has, so the remote pane drew sizes, timestamps and modes for rows whose names were not on screen at all. That is the same fault as the one above rather than a second one: the numbers were picked for the narrow budget, could not have fitted their own content there, and never grew anywhere else. Star columns with a MaxWidth answer both, because the cap is what makes "share the width" mean the right thing at each end. Wide, the three numeric columns stop growing at what their text needs and NAME keeps every remaining pixel. Narrow, nothing carries a MinWidth to overflow with, so all four give ground together and NAME — weighted heaviest — is the last to run out. MODIFIED takes the extra weight so it reaches its cap first, being the widest content and the column most often actually read; the local pane's NAME carries the remote's PERMS weight folded into it, which is what makes SIZE and MODIFIED come out the same width on both sides of the arrow column. Timestamps.Format already argued that both panes write a time the same way so the two can be read against each other, and two different widths would have made that argument for nothing. ◆ THE HEADINGS RAN TOGETHER, and that was visible as one word: SIZE ended on the pixel MODIFIED began at, so the row read "SIZEMODIFIED". They are right-aligned in their own columns, so the gap has to come from a left margin on each — which does not move the label and does stop the column before it reaching this one. The three now carry one, and ellipsize rather than clip where even the label has no room. ◆ TWO PLACEHOLDERS WERE CUT OFF MID-WORD, which reads as a rendering fault rather than as a hint. MKDIR's box drew "new directo" — 101 pixels of text in 74 pixels of room — and says "directory" now, since the button beside it carries the "new" half already. The pane header's path box drew a path ending mid-segment at the narrow budget and says "path": the only time that placeholder shows is on a pane with nothing connected, where the box is disabled and the invitation below is doing the explaining, and what the box is for is in its tooltip where there is room for it. FOUR COPIES OF THE COLUMN DEFINITIONS, one heading row and one row template per pane. Avalonia cannot share a ColumnDefinitions instance between two Grids — each mutates its own computed sizes — and SharedSizeGroup only applies to Auto columns, so what catches a copy that drifts is measurement rather than discipline: every cell is held against the width its own text needs when unconstrained, the headings against each other, and NAME against zero at the narrowest budget. Nothing asserts a number this file also wrote down, which is the failure mode a test of a layout most easily has. The roomy end is measured at the width a maximised 1843-pixel window leaves, which is where this was reported from; LayoutHarness.SessionScreenWidth cannot express it because that constant is pinned to the window's minimum, so the arithmetic is spelled out beside the test that uses it.
Type a path on the SFTP pane, and put a file right without deleting it
2026-08-21 14:01:45 +02:00 · 2026-08-21 12:05:33 +02:00 · 2026-08-14 14:13:28 +00:00 · 2026-08-14 15:44:03 +02:00 · 2026-08-14 15:09:43 +02:00 · 2026-08-14 09:13:16 +00:00
105 changed files with 8840 additions and 727 deletions
@@ -291,6 +291,7 @@ jobs:
      # so it is not done either. What reaches users is built, installed and walked through Phase 16
      # of docs/manual-checks.md by a person first.
      - name: package the windows desktop client
+        id: winpack
        if: github.event_name != 'pull_request'
        run: |
          set -euo pipefail
@@ -374,6 +375,93 @@ jobs:
          ls -la "$releases"
          echo "Packaged DodoSSH $packVersion for win-x64, from a build MinVer calls $version."

+          # Handed to the macOS step below rather than worked out again there. The floor logic above
+          # is thirty lines of reasoning about MinVer's pre-first-tag answer, and a second copy of it
+          # is a second thing to keep in step — while two desktop packages built from one commit
+          # carrying different version numbers is precisely the confusion this file spends that
+          # reasoning to avoid.
+          echo "packVersion=$packVersion" >> "$GITHUB_OUTPUT"
+
+      # ◆ AND THE macOS BUNDLE IS BUILT HERE, ON LINUX, AND IS ALSO THROWN AWAY.
+      #
+      # Same argument as the Windows step above, one platform along: the failures a release is most
+      # exposed to are the ones only the packager finds, and the person who would otherwise find them
+      # is the one midway through a release on the one Mac that can cut one.
+      #
+      # What this catches that the Windows step cannot: the osx-arm64 restore graph. A native package
+      # that resolves for win-x64 and has no osx-arm64 asset — libsodium and SkiaSharp both ship per
+      # RID — fails here, on every main build, rather than at the first `dotnet publish` of a release
+      # nobody can retry without a Mac.
+      #
+      # ◆ bundle, NOT pack, AND THE DIFFERENCE IS NOT A CHOICE.
+      #
+      # `vpk [osx]` cross-compiling from a non-Mac offers exactly one packaging verb: bundle, which
+      # builds the .app. There is no `[osx] pack` off a Mac, and that is correct rather than a gap —
+      # pack signs with codesign, submits to Apple with notarytool and staples the ticket, all of
+      # which is Apple tooling that exists on no other platform. So this proves the bundle and stops
+      # where the platform does.
+      #
+      # No --plist and no --icon either, deliberately. Both are proved by scripts/release-macos.sh on
+      # the machine that can also check the result; passing a rendered plist here would mean copying
+      # the substitution out of that script to no end, since nothing looks at what this produces.
+      #
+      # ◆ NOTHING IS UPLOADED, FOR THE REASON THE WINDOWS STEP GIVES.
+      #
+      # RUNNER_TEMP, dying with the job. ADR 0013 rule 3 puts the capability to ship somebody a build
+      # on a machine which is not a runner, and an unsigned .app is additionally something no Mac
+      # would open — so publishing it would be handing out a file whose only possible use is confusion.
+      - name: publish and bundle the macos desktop client
+        if: github.event_name != 'pull_request'
+        run: |
+          set -euo pipefail
+
+          # RestoreLockedMode=false for the RID, exactly as the win-x64 publish above does — see the
+          # long note there for why the committed lock files are deliberately RID-free. This runner's
+          # checkout is thrown away, so the lock files it rewrites go nowhere.
+          dotnet publish src/DodoSSH.Client.App/DodoSSH.Client.App.csproj \
+            --configuration Release --runtime osx-arm64 --self-contained true \
+            -p:RestoreLockedMode=false \
+            --output "$RUNNER_TEMP/osx-arm64"
+
+          # The apphost has no extension on macOS, so this is `DodoSSH` and not `DodoSSH.exe`. Named
+          # rather than globbed, because a publish that produced no apphost at all would otherwise
+          # bundle happily and produce an .app that launches nothing.
+          if [ ! -s "$RUNNER_TEMP/osx-arm64/DodoSSH" ]; then
+            echo "The osx-arm64 publish produced no apphost." >&2
+            ls -la "$RUNNER_TEMP/osx-arm64" >&2 || true
+            exit 1
+          fi
+
+          bundles="$RUNNER_TEMP/osx-bundle"
+
+          # The quotes around [osx] are load-bearing, exactly as they are on '[win]' above: unquoted,
+          # the shell reads it as a glob matching any one of o, s and x.
+          dotnet vpk '[osx]' bundle \
+            --skip-updates \
+            --packId DodoSSH.Desktop \
+            --packVersion '${{ steps.winpack.outputs.packVersion }}' \
+            --packDir "$RUNNER_TEMP/osx-arm64" \
+            --packTitle DodoSSH \
+            --packAuthors DodoTech \
+            --mainExe DodoSSH \
+            --bundleId dev.dodotech.dodossh \
+            --runtime osx-arm64 \
+            --channel osx \
+            --outputDir "$bundles"
+
+          # Asked for rather than inferred from an exit code, for the reason the Windows step gives.
+          # The Info.plist is the specific thing worth naming: a bundle missing it is a directory
+          # macOS will not treat as an application at all, and it is the one part of the .app that
+          # vpk composes rather than copies.
+          app="$bundles/DodoSSH.Desktop.app"
+          if [ ! -s "$app/Contents/Info.plist" ]; then
+            echo "vpk reported success and there is no Info.plist at $app/Contents/Info.plist." >&2
+            find "$bundles" -maxdepth 3 >&2 || true
+            exit 1
+          fi
+
+          echo "Bundled DodoSSH ${{ steps.winpack.outputs.packVersion }} for osx-arm64."
+
      # This includes the end-to-end suite, which starts PostgreSQL, Keycloak and an OpenSSH
      # server through Testcontainers and runs the API as a child process — so it needs a
      # Docker daemon and gets one here. That is why the tests run on ubuntu rather than
@@ -0,0 +1,68 @@
+<Project>
+
+  <!--
+    ◆ THE TRIMMER'S VERSION IS PINNED HERE BECAUSE OTHERWISE THE LOCK FILES ARE NOT LOCKED.
+
+    Microsoft.NET.ILLink.Tasks is not referenced by anything in this repository. The SDK adds it
+    on its own to any project that sets IsTrimmable or IsAotCompatible — DodoSSH.Contracts and
+    DodoSSH.Crypto do, and the Android head gets it from trimming being on by default there — and
+    the version it asks for is whatever the running SDK happens to bundle. That version lives in
+    the SDK's own Microsoft.NETCoreSdk.BundledVersions.props, as a KnownILLinkPack item.
+
+    Which makes it a dependency whose version is a property of the toolchain rather than of this
+    repository, and that is the whole problem: packages.lock.json records it as a Direct reference
+    with a requested range, so the lock file silently means "whichever SDK last ran a restore".
+    global.json says rollForward: latestMinor, so CI's setup-dotnet installs the newest 10.x SDK
+    that exists on the day it runs. The moment .NET ships a servicing release, CI's SDK asks for a
+    version the committed lock files do not have, and the locked-mode restore in ci.yml fails with
+    NU1004 before a single file is compiled.
+
+    That is not hypothetical. It closed the whole pipeline: main's run 125 and every open pull
+    request went red together, on
+
+        error NU1004: The package reference Microsoft.NET.ILLink.Tasks version has changed
+        from [10.0.10, ) to [10.0.11, ).
+
+    with nothing in any of those commits touching a package. .NET had shipped SDK 10.0.400, which
+    bundles ILLink 10.0.11 where 10.0.302 bundled 10.0.10, and setup-dotnet installed it the next
+    time anything ran.
+
+    Worse than the outage is the shape of the repair without this pin. Regenerating the lock files
+    holds only until the next servicing release, and it cannot be done from a machine whose newest
+    SDK is older than the runner's: a restore on 10.0.302 writes 10.0.10 straight back and re-breaks
+    CI, so the recorded version becomes a fact about whoever ran restore last rather than about this
+    repository. That is exactly the state locking exists to prevent, and it is not a hypothetical
+    either — every SDK installed on the machine this pin was written on tops out at 10.0.302.
+
+    Pinning it makes the recorded version a decision this repository made, reviewable in a diff
+    like every other version in Directory.Packages.props, and identical on every machine whatever
+    SDK it has. Moving it is then a deliberate edit here plus a regenerated lock file, which is the
+    same ceremony any other dependency bump gets.
+
+    It is an Update on the SDK's item rather than a PackageVersion in Directory.Packages.props, and
+    it has to be: the reference is implicit, so the SDK supplies the version itself and central
+    package management never gets asked. ProcessFrameworkReferences reads @(KnownILLinkPack) when
+    it runs, which is why this lives in Directory.Build.targets — the item does not exist yet while
+    Directory.Build.props is being evaluated.
+
+    Keep this within a patch or two of the runtime the SDK ships. It is the trimming analyzer and
+    the ILLink task, so a small skew is harmless, but a version far behind the framework being
+    analysed is a real way to miss a trim warning.
+  -->
+  <Target Name="PinTheILLinkPackVersion" BeforeTargets="ProcessFrameworkReferences">
+    <!--
+      Inside a target, and not for tidiness. The SDK ships one KnownILLinkPack per target framework
+      and they all share the identity "Microsoft.NET.ILLink.Tasks", so the TargetFramework metadata
+      is the only thing telling net10.0's entry from net8.0's. A condition on %(...) is item
+      batching, which MSBuild permits in a target and rejects during evaluation with MSB4191 — so
+      an ItemGroup at the top of this file cannot express "only the net10.0 one" at all, and the
+      unconditioned Update it would have to become rewrites every framework's entry.
+    -->
+    <ItemGroup>
+      <KnownILLinkPack Update="Microsoft.NET.ILLink.Tasks"
+                       Condition="'%(TargetFramework)' == 'net10.0'"
+                       ILLinkPackVersion="10.0.11" />
+    </ItemGroup>
+  </Target>
+
+</Project>
@@ -88,8 +88,12 @@
    -->
    <PackageVersion Include="NSec.Cryptography" Version="26.4.0" />
    <PackageVersion Include="libsodium" Version="1.0.22" />
-    <!-- Managed differential oracle for the crypto test suite only. -->
-    <PackageVersion Include="BouncyCastle.Cryptography" Version="2.6.2" />
+    <!--
+      Managed differential oracle for the crypto test suite only. Also what SSH.NET pulls in,
+      so central transitive pinning makes this pin its floor too: 2.7.0 is what SSH.NET
+      2026.0.0 asks for, and pinning below that is a downgrade error rather than a preference.
+    -->
+    <PackageVersion Include="BouncyCastle.Cryptography" Version="2.7.0" />
  </ItemGroup>
  <ItemGroup Label="Desktop client">
    <!--
@@ -98,8 +102,14 @@
      agent forwarding (needs an upstream change; de-scoped from v1) and being handed a
      pre-connected Stream — it performs its own socket connect, which is why the relay and
      ProxyJump both go through a loopback TCP bridge. See docs/adr/.
+
+      2026.0.0 is the fix for GHSA-q939-rpr3-3284, a path traversal in ScpClient.Download's
+      recursive mode that trusts server-supplied names (everything up to and including
+      2025.1.0 is affected). Nothing here uses ScpClient — transfers go through SftpClient —
+      so this was an upgrade on principle rather than an exposure, and the release notes
+      list no breaking changes over 2025.1.0.
    -->
-    <PackageVersion Include="SSH.NET" Version="2025.1.0" />
+    <PackageVersion Include="SSH.NET" Version="2026.0.0" />
    <!--
      The S3 client, for buckets as a remote in the file browser. First-party, Apache-2.0, and
      managed only — no native assets — which is the bar this file sets for anything that gets
@@ -211,5 +221,20 @@
      mistakes that cause real authorization holes.
    -->
    <PackageVersion Include="WireMock.Net" Version="2.13.0" />
+    <!--
+      A JavaScript interpreter, in managed code, so that terminal.js can be tested as the file that
+      ships rather than as a transcription of it into C#. Test-only and referenced by exactly one
+      project; nothing in src depends on it.
+
+      Chosen over shelling out to node, which is the obvious alternative and needs node present
+      wherever the suite runs — CI installs one already, but a test that only runs when a separate
+      command is remembered is a test that stops being run. Chosen over a headless browser for the
+      same reason several times over.
+
+      What it does not buy: Jint is not Chromium, so this proves the page's own logic and nothing
+      about how WebView2 or Android's WebView behave. That line is drawn in RendererPage's remark and
+      picked up by docs/manual-checks.md 1.10 and 11.12a.
+    -->
+    <PackageVersion Include="Jint" Version="4.16.0" />
  </ItemGroup>
 </Project>
@@ -80,6 +80,8 @@ docs/platform-flags.md     what differs off Windows, and the gotchas that have c
 docs/manual-checks.md      what no test can reach, and what to look for when checking by hand
 docs/android-port.md       the Android head: what was decided, what is built, what is left
 scripts/                   release-windows.ps1 — builds, packs and publishes the Windows client
+                           release-macos.sh   — the same, signed and notarized, on a Mac
+build/macos/               the entitlements and Info.plist template the macOS bundle is built from
 ```

 Everything under `src/DodoSSH.Client.*` except the two heads and `Shell` is deliberately free of Avalonia.
@@ -152,8 +154,32 @@ reinstalling asks for your passphrase rather than starting over. Use **Sign out*
 you want the machine to genuinely forget everything — an uninstall is not a sign-out, and does not withdraw
 this machine's device key from your account.

-Cutting a release is `scripts/release-windows.ps1`, run by a person on a Windows machine. Deliberately not a
-CI job; ADR 0013 decision 3 explains why, and it is not only that the runners are Linux.
+## Installing on macOS
+
+A `.pkg` on the same release page, for Apple Silicon. Everything above about where a client may come from,
+about the update check and about uninstalling applies unchanged; what differs is worth three short
+paragraphs.
+
+**It is signed and notarized, so there is no warning to click past.** That is not generosity — macOS refuses
+to open an un-notarized download outright rather than warning about it, so unlike the Windows build there
+was never an unsigned option. If you *do* see "cannot be opened because Apple cannot check it for malicious
+software", the file did not come from the project's release page, and that is worth taking literally.
+
+**Apple Silicon only for now.** An Intel package is a small amount of work and no one here has an Intel Mac
+to check it on, and this project does not ship desktop builds nobody has run — see
+[docs/manual-checks.md](docs/manual-checks.md). Under Rosetta the arm64 build will not run; there is no
+graceful version of that, and the honest answer is that the platform is not covered yet.
+
+**Touch ID can stand in for your passphrase**, on a Mac with a Secure Enclave. The key that unwraps your
+device key is generated inside the enclave and never leaves it, and the enclave — not DodoSSH — is what
+requires your fingerprint or login password before it will use it. Cancel the prompt and you get the
+passphrase screen, always. The application lives at `/Applications/DodoSSH.Desktop.app` and your vault cache
+at `~/Library/Application Support/DodoSSH`, which are deliberately two different places so that removing the
+first never touches the second.
+
+Cutting a release is `scripts/release-windows.ps1`, run by a person on a Windows machine, and
+`scripts/release-macos.sh` on a Mac. Deliberately not a CI job; ADR 0013 decision 3 explains why, and it is
+not only that the runners are Linux.

 ### The nightly desktop build

@@ -886,8 +912,18 @@ keychain plus a terminal — and the spike that gates all of it.
  [ADR 0013](docs/adr/0013-desktop-distribution-and-updates.md), and
  [Installing on Windows](#installing-on-windows) for what a user sees.

-  Still to do here: signing (the first release is unsigned, and the trigger for buying a certificate is the
-  first release aimed at strangers), and macOS and Linux packaging.
+  **The macOS half is built on the same machinery**, and signed from the start because Gatekeeper leaves no
+  choice: `scripts/release-macos.sh` publishes, signs every native library, notarizes with Apple and staples
+  the ticket before it will hand anything over, and refuses to upload until a person has installed it. The
+  device key is held in the Secure Enclave behind Touch ID. CI publishes `osx-arm64` and builds the `.app`
+  on every main build to prove it still packages, and uploads nothing. See
+  [ADR 0013](docs/adr/0013-desktop-distribution-and-updates.md) decision 10 and
+  [Installing on macOS](#installing-on-macos).
+
+  Still to do here: Windows signing (the first Windows release is unsigned, and the trigger for buying a
+  certificate is the first release aimed at strangers), macOS on Intel, Linux packaging, and Phase 18 of the
+  manual checks — the macOS build has never actually run, because there is no macOS runner in CI and
+  everything above is verified only as far as the bundle.
 - **M5 — multi-provider OIDC**, identity key rotation, per-item content keys.

 ## Licence
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  What the hardened runtime has to be asked to relax before a .NET application will run under it.
+
+  The hardened runtime is not optional: notarization refuses a Developer ID submission without it,
+  and Gatekeeper refuses an un-notarized download. So every entitlement below is the price of being
+  distributable at all, and each one is a hole in a wall that is otherwise worth having. They are
+  listed one at a time, with what breaks without each, because the temptation when notarization
+  fails at eleven at night is to paste in a longer list from somewhere and stop thinking.
+
+  ◆ WHAT IS DELIBERATELY NOT HERE.
+
+  com.apple.security.app-sandbox. Developer ID distribution outside the App Store does not require
+  the sandbox, and turning it on would break the product outright: the terminal's data plane is a
+  loopback WebSocket (see DodoSSH.Client.Terminal/TerminalDataPlane.cs), and a sandboxed process
+  needs com.apple.security.network.server to listen at all, plus network.client to reach any host
+  the user asks for. This is the same shape of decision as ruling out MSIX on Windows, which was
+  ruled out for the same loopback reason — docs/platform-flags.md.
+
+  com.apple.security.cs.debugger. Would let this process attach to others. Nothing here debugs
+  anything, and it is the entitlement most worth not having.
+-->
+<plist version="1.0">
+<dict>
+  <!--
+    CoreCLR compiles IL to machine code at runtime and then executes the pages it just wrote. The
+    hardened runtime's default is that no page is both writable and executable, so without this the
+    process does not start — it dies during runtime initialisation, before any of this application's
+    code runs, which means before anything exists that could report it.
+  -->
+  <key>com.apple.security.cs.allow-jit</key>
+  <true/>
+
+  <!--
+    The broader form of the same permission, and it is needed as well as allow-jit rather than
+    instead of it. allow-jit covers pages mapped through the MAP_JIT convention; CoreCLR also
+    allocates executable memory outside that path — stubs, precode, and the write-xor-execute
+    fallback it uses when MAP_JIT is unavailable. With only the first, startup gets further and
+    still fails.
+  -->
+  <key>com.apple.security.cs.allow-unsigned-executable-memory</key>
+  <true/>
+
+  <!--
+    Library validation requires every loaded dylib to be signed by the same team as the main
+    binary. This bundle carries native libraries built by other people — libsodium, libSkiaSharp,
+    libHarfBuzzSharp, libe_sqlite3, libAvaloniaNative — and the release script signs each of them
+    with this Developer ID, which would in principle satisfy validation.
+
+    It is disabled anyway, and the reason is the updater. Velopack replaces the bundle in place and
+    relaunches it, and the process doing the replacing is not always signed by the same team as the
+    process being replaced during the changeover. Leaving validation on makes the failure mode of a
+    bad update "the application will not start", with no way to recover except a reinstall the user
+    would have to be told about through some other channel.
+  -->
+  <key>com.apple.security.cs.disable-library-validation</key>
+  <true/>
+
+  <!--
+    The runtime reads DYLD_ variables while resolving its own native dependencies, and Velopack's
+    update path sets them. Without this the hardened runtime strips them silently and the failure
+    surfaces later as a library that cannot be found, naming a file that is plainly present.
+  -->
+  <key>com.apple.security.cs.allow-dyld-environment-variables</key>
+  <true/>
+</dict>
+</plist>
@@ -0,0 +1,125 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  The Info.plist for the macOS bundle, with the version left as a placeholder.
+
+  ◆ A TEMPLATE RATHER THAN A FILE, BECAUSE vpk COPIES A CUSTOM PLIST VERBATIM.
+
+  Measured, not assumed: `vpk [osx] bundle --plist` performs no substitution of any kind. It logs
+  "Bundle using provided Info.plist" and copies the bytes. That is also why it refuses --plist and
+  --bundleId together — with a plist supplied, every key is the caller's problem.
+
+  So a committed Info.plist would carry whatever version it was written with into every release
+  afterwards, and the failure is quiet in the worst way: Velopack's own release index would carry the
+  right version, the updater would compare correctly and update correctly, and only the About window,
+  Finder's Get Info panel and any crash report would claim the build was something else. Nobody
+  reads those on the day of a release. scripts/release-macos.sh substitutes @VERSION@ into a copy
+  and passes that.
+
+  ◆ WHY A CUSTOM PLIST AT ALL, WHEN vpk WRITES A PERFECTLY GOOD ONE.
+
+  Three keys it does not write, each of which is a real defect without it:
+
+    CFBundleDisplayName    The bundle on disk is DodoSSH.Desktop.app, because the pack id must not
+                           be DodoSSH — see scripts/release-macos.sh for the directory collision
+                           that rule prevents. On Windows the pack id is invisible; on macOS it
+                           names the thing in /Applications and in the Dock. This key is what puts
+                           "DodoSSH" back in front of a person while the bundle keeps the id.
+
+    LSMinimumSystemVersion Without it macOS will happily launch this on a release the runtime was
+                           never built for, and the user gets a dyld crash rather than a sentence.
+
+    NSHumanReadableCopyright  Shown in the About panel. Absent, the panel shows a blank line.
+-->
+<plist version="1.0">
+<dict>
+  <!--
+    CFBundleName is what the menu bar shows and is capped at 15 characters by convention;
+    CFBundleDisplayName is what Finder and the Dock show. Both say DodoSSH, and the bundle
+    directory does not. See the note above.
+  -->
+  <key>CFBundleName</key>
+  <string>DodoSSH</string>
+
+  <key>CFBundleDisplayName</key>
+  <string>DodoSSH</string>
+
+  <!--
+    Reverse-DNS under the domain this project actually controls. It is the identity Gatekeeper,
+    the notary service and the keychain all key off, so it is as irreversible as the Windows pack
+    id: changing it makes an update a different application, and it orphans anything the previous
+    identifier stored — including the Secure Enclave key MacDeviceKeyStore holds, which is scoped
+    to this identifier and cannot be migrated because its whole point is that it never leaves the
+    enclave.
+  -->
+  <key>CFBundleIdentifier</key>
+  <string>dev.dodotech.dodossh</string>
+
+  <!--
+    The apphost the publish produced, named for the product by <AssemblyName> in the csproj rather
+    than for the project. Must match --mainExe or the bundle launches nothing.
+  -->
+  <key>CFBundleExecutable</key>
+  <string>DodoSSH</string>
+
+  <!--
+    Both version keys take the numeric core only — 1.2.3 and never 1.2.3-rc.1 — because Apple
+    defines them as one to three dot-separated integers and notarization rejects what it cannot
+    parse. The full version, prerelease suffix and all, is in Velopack's release index, and that
+    is the one the updater compares. These two are for Finder and for Gatekeeper.
+
+    They are the same value rather than the usual marketing/build split, because there is no build
+    counter here that a release does not already bump.
+  -->
+  <key>CFBundleShortVersionString</key>
+  <string>@VERSION@</string>
+
+  <key>CFBundleVersion</key>
+  <string>@VERSION@</string>
+
+  <!--
+    The file name inside Contents/Resources, which is where --icon puts it. With a custom plist
+    nothing rewrites this key, so a rename of the asset that forgets this line produces a bundle
+    showing the generic application icon and no error anywhere.
+  -->
+  <key>CFBundleIconFile</key>
+  <string>dodossh.icns</string>
+
+  <key>CFBundlePackageType</key>
+  <string>APPL</string>
+
+  <!--
+    12.0, and it is read off the binaries rather than off a support matrix. The apphost and
+    libcoreclr.dylib in a net10.0 osx-arm64 publish both carry LC_BUILD_VERSION with minos 12.0.0,
+    so 12.0 is the oldest release these bytes are built to load on.
+
+    Microsoft's *support* statement for .NET 10 is higher than this, and that difference is
+    deliberate rather than overlooked: this key decides whether macOS refuses to launch the app at
+    all, and refusing on a release where it would in fact have run is the worse of the two errors.
+    A user on an unsupported-but-working macOS gets the application; the support matrix governs
+    what gets fixed if it misbehaves there, which is a different question.
+  -->
+  <key>LSMinimumSystemVersion</key>
+  <string>12.0</string>
+
+  <!--
+    Without this the window is drawn at 1x and scaled up, which on a Retina display turns the
+    terminal — the one surface in this application that is nothing but small text — into a blur.
+  -->
+  <key>NSHighResolutionCapable</key>
+  <true/>
+
+  <key>NSPrincipalClass</key>
+  <string>NSApplication</string>
+
+  <!--
+    False, and stated rather than left out. An agent application has no Dock icon and no menu bar;
+    this one is an ordinary windowed application and the default is already false, but the key
+    being absent is indistinguishable from somebody having removed it.
+  -->
+  <key>LSUIElement</key>
+  <false/>
+
+  <key>NSHumanReadableCopyright</key>
+  <string>© DodoTech. MIT licensed.</string>
+</dict>
+</plist>
@@ -1,4 +1,4 @@
-# ADR 0007 — What protects the device key on Windows
+# ADR 0007 — What protects the device key on the desktop

 **Status:** accepted, 2026-07-30
 **Supersedes nothing. Constrains** the device-unlock work described in the client roadmap.
@@ -141,6 +141,14 @@ would have become false under DPAPI alone. A gesture is still something the atta
 - **A TPM is not always there.** A machine without one gets a store that reports itself unavailable, so
  unlock keeps asking for the passphrase and neither affordance appears in the interface. The passphrase path
  is therefore required, not a nicety.
+- **macOS reaches the same decision through different hardware, and the argument transfers intact.**
+  `MacDeviceKeyStore` puts the wrapping key in the Secure Enclave under an access control requiring user
+  presence, so Touch ID or the login password is a condition of *using* it and the enforcement is the
+  platform's rather than the process's — which is the entire point of the 2026-07-30 amendment above, and
+  the thing a self-drawn prompt over a protected file would fail to be. The mechanical differences are
+  incidental: P-256 with ECIES because the enclave holds no other kind of key, and no prompt when sealing
+  because the public half needs no consent. See docs/platform-flags.md for the three ordinary Macs where the
+  probe answers no, one of which is every unsigned development build.
 - **The stored key must be treated as losable at any time** — a reset PIN, a cleared TPM, a replaced key.
  Every loss degrades to a passphrase prompt and never to a locked-out vault, which is why every failure in
  the store returns null rather than throwing and why the three unlock statuses all end in the same advice.
@@ -228,6 +228,44 @@ changes.
 token, and it puts a compellable third party in the signing path — which is ADR 0011 rule 3's shape one
 layer down, declined there for reasons that do not stop applying because the vendor changed.

+**This rule is Windows-only, and macOS gets the opposite one.** See decision 10: there is no "unsigned for
+now" available on that platform at any price, because Gatekeeper refuses rather than warns.
+
+### 10. macOS is a second desktop platform on the same machinery, signed from the start
+
+The macOS head is the same application, the same Velopack, and the same two-phase person-run release. Four
+things differ, and each is forced rather than chosen.
+
+**Signing is a precondition, not an improvement.** Decision 8's whole argument — one dialog per user per
+lifetime, buy a certificate when a stranger is invited to install — has no macOS equivalent. An
+un-notarized download is refused outright, so the Developer ID certificate and the notarization round trip
+are the price of the package existing. `scripts/release-macos.sh` therefore refuses to run without the
+signing identities, where the Windows script refuses nothing.
+
+**The channels are `osx` and `osx-nightly`, and they are separate for decision 9's reason.** Four channels
+now publish to one repository, and the only thing keeping a Mac from being offered a Windows package is
+that it never reads that index. The macOS nightly channel is named and has no publisher: CI builds and
+bundles the macOS head to prove it still builds, and uploads nothing, exactly as it does for the Windows
+release channel.
+
+**The pack id is shared with Windows, and on macOS it is visible.** vpk names the bundle after the pack id,
+so `/Applications` holds `DodoSSH.Desktop.app`. Decision 2's reasoning applies with more force here rather
+than less: a pack id of `DodoSSH` would put Velopack's install root on `~/Library/Application
+Support/DodoSSH`, which is `ClientPaths.DataDirectory`, and an uninstall would take the user's un-synced
+outbox with it. `CFBundleDisplayName` puts the product name back in front of a person; the directory keeps
+the id.
+
+**arm64 only, because the check is the scarce thing.** Velopack keys a channel to one architecture, and an
+Intel package would be the only artefact in this repository reaching users without somebody having walked
+Phase 18 against it. The engineering for a second channel is small and is described in the release script;
+what is missing is an Intel Mac to verify on, and shipping blind is the thing this project's manual-check
+discipline exists to refuse.
+
+**And one thing that does not differ, which is worth saying because it is the expensive half.** The
+capability to publish still lives on a person's machine and never in CI. Notarization does not change that:
+Apple's ticket says this build came from this developer account, and says nothing about whether the build
+should have been made. Velopack clients still apply what their feed serves. Rule 3 is untouched.
+
 ### 9. There is a second desktop channel, published by CI, and it is a second application

 [ADR 0014](0014-android-updates.md) gave the phone a nightly channel and rule 3 above gives the desktop
@@ -348,6 +348,16 @@ runtime or the receipt is silently invisible — the service still runs, but not
 to show, at most once, with no result read back: a refusal costs the notification and nothing else, which is
 what the manifest's own comment on the permission says.

+**And a fourth correction, found by the notification refusing to come down.** "1 shell connected" outlived
+the shell, both ways a shell can close. A shell exiting on its own announced `SessionEnded` from inside its
+run's own finally block — where the run task is by definition not yet complete, so the
+`LiveSessionCount` the keep-alive reads from that event still counted the session that had just ended, and
+nothing fired afterwards to correct it. A tab closed by hand announced nothing at all, by a recorded
+decision that assumed every subscriber was the closer. Both reversed in `TerminalWorkspace`: the end is now
+announced from a continuation after the run has actually completed, and `CloseSessionAsync` announces too,
+after its own drain — the event's remark carries the reversal, and `SessionEnded`'s subscribers were all
+already "reconcile to reality" handlers for which a second announcement is harmless.
+
 ### Phone first

 About 360dp wide. The tablet route was cheaper — a landscape tablet is close to the existing 880×560 minimum
@@ -300,7 +300,7 @@ the chrome, hosts and terminals, file transfer, the vault, teams, and preference
 > | The status bar's negotiated cipher, host-key algorithm and key/credential name | ◆ **Shipped, on both surfaces, with three honest deviations.** `ISshConnection` and `ISftpSession` now both carry `Cipher` — the server-to-client algorithm off SSH.NET's own `ConnectionInfo.CurrentServerEncryption`, captured once at construction because a rekey is not an event SSH.NET raises — and `TerminalWorkspace.GetSessionFacts` hands the cipher and the host key's algorithm back to the shell the moment a session opens; `VaultViewModel.TryBuildAuthentication` now threads the authenticating key's or credential's own `Label` into `HostAuthentication.IdentityLabel`, all the way to `MainWindowViewModel`'s surface-aware `SessionCipher`, `SessionHostKeyAlgorithm` and `SessionIdentityLabel`, composed into one `SessionIdentityText` run for the status bar. Three deviations from the mock, not omissions: the algorithm prints exactly as negotiated (`ssh-ed25519`), not the design's shortened `ed25519`, because trimming it would be an edit to a string this client did not choose; the run is plain text rather than the design's clickable element, because there is no pin-details modal for a session that is already open, and drawing a click target for a screen that does not exist would itself be a fabrication; and a typed-password session — nothing filed in the keychain to name — shows the host-key algorithm alone, with no `·` after it, because there is no item behind the dot. |
 > | S3 dimmed in the design's own switcher | **Enabled.** The mock leaves S3 as future work; this application already has bucket browsing, so SSH, SFTP and S3 are a true three-way segment, wired to `IsSshShowing`, `IsTransfersShowing` and `IsBucketsShowing` exactly alike. |
 > | The S3/Buckets screen | **Did not get the session shell in v5b.** `TransfersScreen` serves both SFTP and S3 today and only the SFTP usage in `MainWindow.axaml` sat inside the new tab row/header/status bar/sidebar; the S3 usage was unchanged at the time. **v5c gives it the shell's own look without the machinery** — a 26-pixel padded, bordered, radius-12 container and nothing past that, since a bucket has no tab to close, no host to head a card with and no pin for a sidebar to show; see the v5c section, below. |
-> | No pins destination in the design at all | **Kept anyway.** The rail still carries Pins — `KnownHostsScreen` — because the mock has no screen for approved host keys and this application's has to stay reachable. |
+> | No pins destination in the design at all | **The rail agrees with the design now.** `KnownHostsScreen` is still built and still reachable — from **Host keys** on the Keys screen's own header, which was always the second way in — but the rail's Pins row is gone. It was kept through v5b on the grounds that the mock has no screen for approved host keys, which is a reason for the screen to exist and was never a reason for a rail entry once the keychain had a door to the same place. Two rail rows landing on one screen is a rail that has to be read twice. |
 > | The popover's Settings and Preferences rows, and the design's own Settings-* family of screens | **Landed in v5c.** What was two doors to one room in v5b — Settings and Preferences both opening the same bare `Preferences` screen — is now two of three doors onto their own settings pages: Settings opens General, Preferences opens Preferences, and a third row, Vaults, opens Vaults. All three are real, distinct pages inside one settings mode; see the v5c section, below. |
 > | `· Org` after the user chip's name, and a `Primary` tag on a vault row in the popover | Neither. There is no organisation concept behind a vault — only the vault itself — and no vault is distinguished as primary; the popover's vault rows are the existing shown-vaults toggles, restyled. |
 > | The design's titlebar, which has nowhere for a sync indicator | `SYNCED` stays, on the titlebar's right side, ahead of the window's own minimise/maximise/close buttons — the one thing this titlebar keeps that the design's own does not draw at all. |
@@ -720,3 +720,24 @@ grid of cards with a drawer — see above. The split it describes did not change
 running, so a tab list rebuilt per unlock would lose track of sessions that are still connected — the very
 sessions the unlock screen already counts. `TerminalWorkspace` gained `SessionActivated` on the wire,
 `IsSessionLive`, and a `SessionEnded` event so a tab can stop claiming to be connected.
+
+---
+
+## v5c-4 — two more, asked for after living with v5b
+
+**The session shell's host header is gone, and it is a deliberate departure from the design.**
+`Terminal.dc.html` and `SFTP.dc.html` both draw a 60-pixel row above the pane carrying the address on the
+left and a cross-surface button on the right, and v5b shipped it as `SessionHeader.axaml`. Both of the two
+facts it held now live at the head of the sidebar beside the pane — the address as its own line, and the
+button stretched across the column under it — and the pane is 60 pixels taller for it. The reasoning is the
+one the design cannot see from a mock: this is a window somebody keeps a terminal open in all day, and a
+full-width strip repeating an address the tab already names was the cheapest 60 pixels in the layout to give
+back. `LayoutHarness.SessionScreenHeight` no longer subtracts a header, for the same reason it stopped
+subtracting the retired window-wide tab strip.
+
+**The sidebar closes, which the design has no state for.** 300 pixels of a 1081-pixel minimum is a lot to
+spend on a list that is often two rows long, so `MainWindowViewModel.IsSessionSidebarOpen` folds the column
+to a 34-pixel rail carrying the chevron that brings it back — a rail rather than nothing, because a panel
+that vanishes without trace is one people report as lost. The choice is written through to
+`ClientSettings.SessionSidebarOpen` rather than held for the session: it is a decision about how much of the
+window a terminal gets, and one that had to be made again on every launch would not really be on offer.
@@ -28,8 +28,9 @@ a phase had nothing left for a person to do, which is the good outcome rather th

 ### 1.1 No screen is sliced at the WebView's left edge · **the important one**

-Open two terminals, then visit every nav rail entry in turn — Hosts, Keys, Pins, Snips, Logs — and both of
-the switcher's other two segments, SFTP and S3, at the rail's own head.
+Open two terminals, then visit every nav rail entry in turn — Hosts, Keys, Snips, Logs — and both of
+the switcher's other two segments, SFTP and S3, at the rail's own head. The pins screen is no longer a rail
+entry; reach it from **Host keys** on the Keys screen's header and check it the same way.

 **Pass:** each screen draws whole, its buttons all clickable, and the nav rail stays up the left edge for
 every one of them. Since v5b's chrome pass the rail is permanent furniture — it no longer collapses for
@@ -170,6 +171,32 @@ bound to the same side of `IsImportOpen`. SettingsNav lighting a different row w
 over the importer would be a guard added to `OnKeyDown` for `IsSettingsMode` that the design never asked for
 and this application's own quick-connect card was built to reach past.

+### 1.10 A terminal left alone for a long time is still a terminal · **needs an hour, or a debugger**
+
+Open a shell, leave the terminal for another screen — HOSTS, FILES, anything — and leave the application
+alone for long enough that the window has been in the background for the better part of an hour. Locking the
+machine or letting it sleep counts and is the easier way to get there. Come back and click the session's
+tab.
+
+**Pass:** the pane is exactly where it was and takes input straight away. If anything is shown at all it is
+`Reconnecting the terminal view…` for a moment, in the second or so before the socket is back — never a
+status that is still there after that.
+
+**Both of the page's own rules here are covered by `RendererReconnectionTests`**, which runs `terminal.js`
+itself in a fake browser — so a failure of this check is more likely to be the WebView behaving unlike that
+fake than the page's logic being wrong. That is exactly the division: the test owns the logic, this owns the
+platform.
+
+**Failure means:** a banner that stays up is the page's retry not running. It is a `setTimeout` chain, and a
+chain is what a WebView is entitled to throttle or freeze while nobody is looking at the page; `terminal.js`
+answers that with wake-ups on `visibilitychange`, `focus` and `online`, none of which can be throttled,
+plus a watchdog for a handshake that never finishes. A banner that flickers on and off every second or two
+instead is the opposite fault — a reconnect loop, in which each attempt displaces the socket before it
+through `TerminalDataPlane.UpgradeAsync`'s takeover and the displaced socket's close schedules the next.
+That is what the "is this still the page's socket" guard in `connect()` exists to stop. A pane that takes no
+input while the banner is *clear* is neither: the socket is open and dead, which nothing on this page can
+currently see — see the note at the end of 11.12a.
+
 ---

 ## Phase 2 — Known Hosts as its own page
@@ -400,6 +427,82 @@ surface. Use the ← button, or drag the file to the local pane first.

 ---

+## Phase 2b — The path box, and what can be done to a remote row
+
+The rules are automated — `SftpPath.Resolve` in `RemotePathTests`, the three questions and the automatic
+refresh in `ShellFlowTests`, both new shapes measured in `ScreenLayoutTests`. What is left here is what
+those cannot reach: a real server's own refusals, and a soft keyboard.
+
+Connect the SFTP page to a host first.
+
+### 2.20 Typing a path
+
+Click into the path in the remote pane's header, type `/var/log`, press Enter. Then type `..`, Enter. Then
+`~`, Enter.
+
+**Pass:** each one lists, the breadcrumb underneath follows, and the box ends up showing the absolute path
+that was actually reached rather than what was typed.
+
+### 2.21 Escape puts the path back
+
+Type nonsense into the box without pressing Enter, then press Escape.
+
+**Pass:** the box goes back to the directory the pane is showing.
+
+### 2.22 A path the server refuses
+
+Type a path that does not exist, and one that exists but is not readable by this account.
+
+**Pass:** the pane stays where it was, the status line at the foot of the screen carries the server's own
+message, and the box still holds what was typed so it can be corrected.
+
+### 2.23 Rename
+
+Select a file, press the rename button, change the name, press RENAME.
+
+**Pass:** the listing comes back with the new name and the row still selected. Then try a name that another
+file in the directory already has: **the server refuses it and says so, and nothing is overwritten** — this
+is the one that matters, because the whole queue's "nothing lands at its final name until it is complete"
+promise rests on the same server behaviour.
+
+### 2.24 Move
+
+Select a file, press the move button, type a directory — try an absolute one and a relative one — and press
+MOVE.
+
+**Pass:** the file leaves the listing and is in the directory that was typed.
+
+Then try one across a filesystem boundary on the same host — `/tmp` to a path on a separate mount is the
+usual pair. **Pass:** the server refuses with its own message about a cross-device link. This cannot be
+faked in a test and is the refusal somebody will eventually meet.
+
+### 2.25 The listing refreshes itself after an upload
+
+Upload a file into the directory showing.
+
+**Pass:** it appears in the remote listing without REFRESH being pressed. Then upload into a *different*
+directory: nothing on screen changes. Then download a file into the folder the local pane is showing, and
+that one appears on the left the same way.
+
+### 2.26 A transfer that lands while a question is open
+
+Start an upload into the directory showing, and while it runs select a row and press DELETE so the question
+is up when the transfer finishes.
+
+**Pass:** the listing does not move while the question is on screen, and refreshes the moment the question
+is answered or cancelled.
+
+**Failure means:** the row the question was asked about is not necessarily the row that gets acted on.
+
+### 2.27 The phone's GO button
+
+On Android, connect on the Files screen, type a path into the box above the breadcrumb and press GO.
+
+**Pass:** it lists. The keyboard's own return key may or may not commit — that is the IME's choice, which is
+why GO exists — but GO always must.
+
+---
+
 ## Phase 3 — Host groups and snippets

 Two synced item kinds, two ways of drawing a group — the desktop's grid of cards, one level at a time, and
@@ -1745,6 +1848,24 @@ is a terminal that answers the buttons and ignores the keyboard: it reads as the
 Worth doing on the software keyboard too, where the same fault shows as the keyboard closing on the first
 tap of an arrow key.

+### 11.10a The accessory keys do not cost the terminal its *software* keyboard either
+
+With a shell open and the software keyboard up, tap **esc**, **tab** or an arrow on the accessory row, then
+keep typing on the software keyboard.
+
+**Pass:** the keyboard settles back unchanged — same layout, same suggestion strip, same height — and
+everything typed after the tap still reaches the terminal. The accessory row stays visible above the
+keyboard throughout. A blink during the press itself is tolerable: the platform takes the focus on both
+halves of every touch and the return is posted right behind each theft, so the connection can visibly flap
+for the press's own duration — what it must never do is *stay* swapped after the finger lifts.
+
+**Failure means:** Android's own view focus stayed on Avalonia's input view after the tap instead of being
+handed back. This is the half `Focusable = false` cannot reach — the platform requests focus for its own
+view after dispatching every handled touch — and the symptom chain is the keyboard swapping to its no-input
+layout and the inset churn parking it over the very row that was tapped. The first fix for this failed by
+timing alone: it handed focus back from inside the very dispatch the platform re-steals it after. See
+`TerminalFocus` in the Android head's Platform folder for both the mechanism and the fix's shape.
+
 ### 11.11 Closing a connection and opening a new one both take you somewhere real

 Open a shell, close its tab, then open a different one from HOSTS.
@@ -1778,6 +1899,29 @@ worse than saying nothing: the banner exists so this is never silently wrong. If
 banner is there, the session's credit window was not reset on reattach and the shell is frozen behind it —
 see `TerminalWorkspace.ReplayAfterAttachAsync`.

+### 11.12a Coming back to a terminal screen left alone for a long while
+
+The same shape as 11.12 and a different trigger: rather than backgrounding the app, stay in it. With a shell
+open, leave the terminal for HOSTS, FILES or MORE — which collapses the renderer to GONE, so the page is
+hidden by Chromium's reckoning — and leave the phone alone for at least ten minutes with the screen off.
+Then come back to the app and to the terminal.
+
+**Pass:** the pane is there and takes input at once, or reconnects visibly within about a second of the
+screen appearing. `Reconnecting the terminal view…` on the way in is fine; still being there once the
+terminal has been on screen for a couple of seconds is not.
+
+**Failure means:** the page's retry did not survive being hidden. A hidden WebView has its timers throttled
+— once a minute after five minutes hidden — and a renderer that was frozen or reclaimed runs none of them,
+which is why `terminal.js` does not rely on the timer alone: `visibilitychange` is the event that says the
+screen is back, and it reconnects immediately rather than waiting to be asked twice. Ten minutes is chosen
+to clear the five-minute threshold with room to spare.
+
+**Not covered by either check, and worth knowing:** a socket that is *open and dead* — the connection gone
+without either end noticing, which a suspended renderer can leave behind — shows no banner at all, because
+`readyState` still reads OPEN and nothing on this page probes further. The symptom is a terminal that looks
+connected and swallows what is typed. If that is ever seen, it is a different bug from this one and needs a
+liveness probe rather than a faster retry.
+
 ---

 ## Phase 12 — Shared vaults: the operations that span two accounts
@@ -2115,13 +2259,19 @@ foreground service is protecting), wait thirty seconds with the shell doing noth
 **Pass:** the notification stayed up the whole time, and the shell is exactly where it was — same scrollback,
 same prompt — with typing reaching the host immediately. Exit the shell.

-**Pass:** the notification goes with it, once nothing else is open.
+**Pass:** the notification goes with it, once nothing else is open. Open another shell and close it from the
+shells strip's ✕ instead of exiting — the notification comes down for that route too, which is the route
+that used to leave it up: a deliberate close announced nothing to the keep-alive at all, and a shell exiting
+on its own was announced while the count still included it.

 **Failure means:** an upload that stalls with the screen off is the count not reaching
 `SessionForegroundService`, and Android has stopped the process mid-transfer. A notification left up
 afterwards is `ActivityChanged` not being subscribed — the other end of the same wire. A shell that has
 disconnected on return is `MainWindowViewModel.TerminalSessionOpened` never reaching `SessionKeepAlive` — the
-service only ever heard about a shell *ending*, so it never came up for one in the first place.
+service only ever heard about a shell *ending*, so it never came up for one in the first place. A
+notification still saying "1 shell connected" after the shell is gone — by either route — is
+`TerminalWorkspace.SessionEnded` firing before the run completed, or a close not announcing; see
+`AnnounceEndedAsync` and the event's own remark.

 ### 14.6a A Files connection with nothing moving still survives backgrounding

@@ -2399,7 +2549,9 @@ script warns rather than failing when that is legitimate, which is the first rel
 ### 16.7 The update arrives, and the restart lands in it · **the whole point of the work**

 With v0.1.0 installed and running, a vault unlocked, a host change made, and **a terminal open**, publish
-v0.1.1 (`-Upload`). Then press CHECK NOW on Settings → General rather than waiting six hours.
+v0.1.1 (`-Upload`). Then press CHECK NOW on Settings → General rather than waiting six hours. Closing and
+reopening the application does the same thing without the button: the first pass of the loop runs at launch,
+so a client started after a release finds it without anybody asking.

 **Pass:** the progress bar moves, the banner appears above the status bar, and — the part to actually watch
 — the terminal **reflows cleanly rather than being sliced**, with the remote seeing the smaller row count.
@@ -2572,3 +2724,120 @@ package manager will not offer to.

 **Failure means:** the channels are not separate, and a public key is signing the application people keep
 their credentials in.
+
+## Phase 18 — Installing the macOS client, and being updated by it
+
+The macOS counterpart of phase 16, and it needs a Mac with a Secure Enclave — an Apple Silicon machine or
+an Intel one with a T2. Every check here is structurally unreachable by a test for the reasons phase 16
+gives, plus one this platform adds: **CI has no macOS runner at all**, so this phase is the only place the
+suite and the application ever run on macOS. Anything `docs/platform-flags.md` marks as unverified on macOS
+is verified here or nowhere.
+
+Run `bash scripts/release-macos.sh` first. It stops after packing and notarizing, on purpose, so that
+everything below happens before anything reaches a user. Phase 16.0 — the feed being readable without
+credentials — applies unchanged and is not repeated.
+
+### 18.1 Gatekeeper accepts it on a machine that did not build it · **do this one first**
+
+The Mac that signed a package trusts it locally whatever happened, so the build machine cannot answer this
+question about itself. Copy the `.pkg` to a second Mac — or at minimum download it through a browser, which
+is what applies the quarantine attribute — and open it.
+
+**Pass:** it installs with no warning beyond the ordinary installer prompts.
+
+**Failure means:** "cannot be opened because Apple cannot check it for malicious software" is notarization
+that did not happen or a ticket that did not staple. The script's `spctl --assess` and `xcrun stapler
+validate` should have caught it before this point, so reaching here means one of those two checks was
+removed or skipped. Do not distribute the package.
+
+### 18.2 The Dock shows the product and not the pack id
+
+Look at the installed application in `/Applications`, in the Dock, and in the menu bar while it runs.
+
+**Pass:** the menu bar says **DodoSSH**. Finder shows **DodoSSH**. The bundle on disk is
+`DodoSSH.Desktop.app` and that is expected — see the pack id note in `scripts/release-macos.sh`.
+
+**Failure means:** "DodoSSH.Desktop" in the menu bar is `CFBundleName` not reaching the bundle, which means
+the rendered `Info.plist` did not get used. Since vpk copies a custom plist verbatim and substitutes
+nothing, check the same bundle's `CFBundleShortVersionString` — if it reads `@VERSION@`, the template was
+passed through unrendered.
+
+### 18.3 The icon is the mark, at every size
+
+Look at it in the Dock, in Finder's icon view at a large size, and in `⌘I` Get Info.
+
+**Pass:** the accent tile and the `>_` mark, crisp at 1024, with the same air around it that Finder and
+Safari have.
+
+**Failure means:** a generic application icon is `CFBundleIconFile` naming a file that is not in
+`Contents/Resources`. An icon that fills its square edge to edge, larger than its neighbours, is
+`New-MarkPng` having been called with the Windows tile fraction — see `dodossh-icon.ps1`.
+
+### 18.4 Touch ID guards the device key, and the enclave enforces it
+
+Register a device key from the security settings page, then lock the vault and unlock it again.
+
+**Pass:** registering shows **no** prompt at all — sealing uses only the public half — and unlocking raises
+the system Touch ID sheet saying DodoSSH is trying to *unlock your DodoSSH vault*. The vault opens on a
+successful touch.
+
+**Failure means:** a prompt at registration is not a failure of correctness but says the key was not created
+in the enclave; check that `kSecAttrTokenID` reached the attributes. **No prompt at unlock, with the vault
+opening anyway, is the serious one** — it means the key is a software key and the access control did nothing,
+which is precisely the "a gate inside the process is not a gate" mistake `WindowsDeviceKeyStore` documents.
+
+### 18.5 Declining the fingerprint falls back to the passphrase
+
+Repeat 18.4 and cancel the Touch ID sheet.
+
+**Pass:** the unlock screen asks for the passphrase, and it works.
+
+**Failure means:** an error dialog, or a stuck screen, is `TryLoadAsync` throwing rather than answering
+null. Every failure it can meet — cancelled, timed out, key invalidated by a password reset — is meant to
+be indistinguishable and to land on the passphrase.
+
+### 18.6 A development build offers no device key at all
+
+Run the application with `dotnet run` rather than from the installed bundle, and open the security settings
+page.
+
+**Pass:** registering a device key is not offered.
+
+**Failure means:** being offered it is `IsSupported` having inferred availability from the OS rather than
+probing. An unsigned build cannot create an enclave key, so accepting the offer would put a wrap on the
+server that nothing can ever open and list a capability this machine does not have.
+
+### 18.7 The terminal works, which is the WKWebView question
+
+Connect to a host and use the shell: type, run something that scrolls, resize the window.
+
+**Pass:** the terminal attaches within a second or two and behaves as it does on Windows.
+
+**Failure means:** a blank pane that reports a renderer timeout after fifteen seconds is the loopback
+WebSocket not reaching WKWebView. This is the check that most needs walking, because the data plane has
+never run against this backend — see `TerminalDataPlane`. If it fails, the App Sandbox is the first thing to
+rule out: the entitlements deliberately do not enable it, and a sandboxed process cannot listen on loopback
+without `com.apple.security.network.server`.
+
+### 18.8 An update is offered, downloaded and applied
+
+With the release installed, cut a second release with a higher version and publish it, then leave the first
+running.
+
+**Pass:** the banner appears, downloads, and on applying the application closes and reopens on the new
+version. The vault's contents and the known hosts survive.
+
+**Failure means:** an update that never arrives is usually the channel — `osx` here and `osx` in
+`VelopackUpdateChannel.MacReleaseChannel`, with no error anywhere when they disagree. An update that
+downloads and fails to apply, leaving the application unable to restart, is library validation: check that
+`com.apple.security.cs.disable-library-validation` survived into the entitlements.
+
+### 18.9 Uninstalling does not take the vault with it
+
+Register a device, sync something, then remove the application.
+
+**Pass:** `~/Library/Application Support/DodoSSH` still holds the cache and the outbox afterwards.
+
+**Failure means:** an empty directory is the pack id having been changed to `DodoSSH`, which puts Velopack's
+install root on top of `ClientPaths.DataDirectory` and makes an uninstall delete a user's un-synced work.
+This is the single reason the bundle is named `DodoSSH.Desktop.app`.
@@ -3,8 +3,18 @@
 Things known or suspected to behave differently outside Windows, plus deployment gotchas that
 have already cost time once. Development is Windows-first, but **the full test suite now runs on
 Linux in CI on every change**, so a Linux claim here is usually a measurement now rather than a
-suspicion. **macOS is still untested**, and anything marked *unverified* has not run on the platform
-in question and must not be assumed to work.
+suspicion. Anything marked *unverified* has not run on the platform in question and must not be
+assumed to work.
+
+**macOS now builds and packages, and has still never run.** The distinction matters more here than
+anywhere else on this page, because the two halves are verified in completely different places. The
+build is measured on every main and tag build: CI publishes `osx-arm64` and runs `vpk [osx] bundle`
+on a Linux runner, which is enough to catch a restore graph with no macOS native asset and an `.app`
+that will not compose. Everything past that — whether the window draws, whether the terminal's
+loopback WebSocket reaches WKWebView, whether the Secure Enclave holds a device key — is verified
+only by a person walking Phase 18 of [manual-checks.md](manual-checks.md) on a Mac, because **there
+is no macOS runner in CI**. Treat every macOS runtime claim below as unverified unless it says
+otherwise.

 Each entry says what the risk is, why it matters, and what to do about it. Delete an entry when it
 has been verified or made moot — not when it merely stops being convenient.
@@ -17,6 +27,19 @@ docs/crypto.md §1. *Already mitigated* — but if a BCL AEAD path is ever added
 **must** gate on `IsSupported` rather than assuming availability, or the client will fail to open
 any vault on macOS.

+**The Secure Enclave holds P-256 keys and nothing else**, which is why `MacDeviceKeyStore` wraps the
+device key with ECIES rather than with the RSA-OAEP the Windows store uses. It will not hold an RSA
+key at any size, so this is not a preference. The useful consequence is that the macOS shape is
+*better* than the Windows one: `SecKeyCopyPublicKey` works on an enclave key without prompting, so
+registering a device is silent and only unlock asks — where Windows raises a dialog at key creation
+too. *Unverified:* no enclave call in this repository has ever run.
+
+**Three ordinary Macs have no usable enclave**, and `IsSupported` probes rather than infers for that
+reason: an Intel machine without a T2, a machine with no login password set, and — the one that
+surprises people — **any build that is not code signed**, because enclave key creation needs a
+signing identity. So `dotnet run` correctly offers no device key at all. Do not "fix" this by
+checking the OS instead; the offer would then put a wrap on the server that nothing can ever open.
+
 **Argon2id timings are measured on one Windows machine only.** 256 MiB with t=4 took 323 ms here.
 The floor and ceiling in `EnrollmentLimits` were chosen against that number. *Unverified
 elsewhere:* recalibrate on the slowest target platform before recommending a default profile,
@@ -26,7 +49,11 @@ and the parameters are stored per user at enrollment, so a bad default is a per-
 **libsodium ships native binaries per RID.** This complicates single-file and AOT publishing, and
 on macOS every native library (`libsodium`, `libSkiaSharp`, `libHarfBuzzSharp`, `libe_sqlite3`)
 must be signed **individually** with `--options runtime --timestamp` before the bundle is signed,
-or notarization fails with an error that does not name the offending file.
+or notarization fails with an error that does not name the offending file. *Mitigated* in
+`scripts/release-macos.sh`, which signs every `.dylib` and `createdump` in a loop before vpk touches
+anything — vpk's own pass uses `codesign --deep`, which is the shape Apple documents as wrong for
+nested code and is the likeliest source of that unnamed rejection. The loop looks redundant next to
+`--deep` and is not; do not delete it because a release once succeeded without it.

 ## Desktop client

@@ -361,11 +388,55 @@ agent of our own plus ProxyJump covers the real use cases.
 **The SSH suite pulls `linuxserver/openssh-server` from Docker Hub**, which is rate-limited for
 unauthenticated pulls. If CI starts failing on image pulls rather than on tests, that is why.

+**That suite has an intermittent `The connection was closed by the remote host`**, on whichever test
+connects first, within tens of milliseconds. Seen in CI and reproducible locally. *Mitigated, not
+solved:* `SshServerFixture` now raises sshd's `MaxStartups` from its compiled-in `10:30:100`, which
+refuses connections at random past ten unauthenticated ones in flight — reachable because xUnit runs
+test classes in parallel and most of them connect. The fixture comment carries the full argument and
+is explicit that the cure is unproven.
+
+**And the reason it is unproven is a measurement trap worth not falling into twice.** Docker
+throughput on the Windows development machine swings enough to swamp the effect: the identical
+unmodified suite ran 85/85 clean and, an hour later, failed 13 runs out of 15. Any before/after flake
+comparison taken there is noise. Measure this class of thing in CI, or make the server say why —
+raise sshd's `LogLevel`, disable Ryuk so the container outlives the run, and read `docker logs`.
+
 **MSIX packaging is ruled out, not merely deprioritised.** A packaged app runs WebView2 in an
 AppContainer where loopback connections are blocked without a `CheckNetIsolation` exemption. The
 terminal data plane *is* a loopback WebSocket, so MSIX would break the product outright. Velopack
 for Windows/macOS/AppImage; Flatpak and deb/rpm defer updates to the package manager.

+**The App Sandbox is ruled out on macOS for the same reason, and the entitlements say so.** A
+sandboxed process cannot listen on loopback without `com.apple.security.network.server`, and the
+terminal is that listener. Developer ID distribution outside the App Store does not require the
+sandbox, so this costs nothing today — but it does mean the Mac App Store is closed to this
+application without solving the data plane differently first. See
+`build/macos/DodoSSH.entitlements`.
+
+**The hardened runtime is not optional and .NET needs four holes punched in it.** Notarization
+refuses a Developer ID submission without it, and CoreCLR will not start under it without
+`allow-jit` and `allow-unsigned-executable-memory` — both, not either, because the runtime allocates
+executable memory outside the `MAP_JIT` path as well. `disable-library-validation` and
+`allow-dyld-environment-variables` are needed for Velopack's updater rather than for the runtime.
+Each is argued individually in the entitlements file; the failure mode for a missing one is a
+process that dies during runtime initialisation, before anything exists that could report it.
+
+**`vpk` cross-compiles to macOS only as far as the bundle.** `vpk [osx] bundle` runs anywhere and
+produces a real `.app`; there is no `[osx] pack` off a Mac, because pack drives `codesign`,
+`notarytool` and `stapler`. So CI can prove the bundle builds and only a Mac can produce something
+installable. Note this is the *opposite* of the Windows story, where `vpk [win] pack` builds the
+whole installer on Linux — the asymmetry is Apple tooling, not a Velopack limitation.
+
+**A custom `Info.plist` is copied verbatim by vpk, with no substitution whatsoever.** That is why
+`--plist` and `--bundleId` are mutually exclusive, and why `build/macos/Info.plist.template` is a
+template the release script renders rather than a committed file. A committed plist would carry one
+version into every release afterwards, and the symptom is silent: Velopack's index would still be
+right, the updater would still work, and only Get Info and any crash report would disagree.
+
+**macOS app icons live on an 824-in-1024 grid.** An icon that bleeds to the edge of its canvas is
+not bolder, it is the one icon in the Dock that is too big. `dodossh-icon.ps1` draws the `.icns` at
+that fraction and the `.ico` at full bleed, from one geometry.
+
 *Checked rather than assumed, now that Velopack is actually wired up:* its Windows path does not
 reintroduce the thing MSIX was ruled out for. `Setup.exe` is an ordinary Win32 executable that unpacks a
 directory under `%LOCALAPPDATA%` and creates shortcuts — there is no `AppxManifest`, no package identity,
@@ -641,6 +712,30 @@ The lasting hazard is the first paragraph and not the fix. Any change to a share
 to a lock file this repository cannot verify from a machine without the Android workload, and it will go
 on being noticed later than every other one.

+**A lock file can go stale with nothing in this repository changing, because `Microsoft.NET.ILLink.Tasks`
+is versioned by the SDK and `global.json` lets the SDK float.** The reference is implicit — nothing in any
+`.csproj` asks for it — and its version tracks the runtime patch band, while `global.json` pins only
+`10.0.100` with `rollForward: latestMinor`. So `setup-dotnet` installs whatever the newest 10.x SDK is on
+the day, and the moment that SDK's band moves, locked-mode restore stops:
+
+```
+error NU1004: The package reference Microsoft.NET.ILLink.Tasks version has changed
+from [10.0.10, ) to [10.0.11, ).
+```
+
+It named `DodoSSH.Client.Android`, `DodoSSH.Contracts` and `DodoSSH.Crypto` — the three lock files that
+carry the entry — on a commit that touched none of them and no dependency at all.
+
+The fix is `--force-evaluate` on those three, **from a machine whose SDK is at least as new as the
+runner's**, which is the part that is easy to get wrong: a `--force-evaluate` from an older SDK rewrites
+the lock at the older version, changes nothing, and looks like it worked. Check `dotnet --version` against
+the version in the error before believing a regeneration.
+
+This will recur on every SDK patch that moves the band. It is the accepted cost of letting the SDK float:
+the alternative is pinning an exact SDK in `global.json`, which trades a recurring lock-file bump for a
+recurring toolchain bump and makes every contributor install one specific SDK. Neither is free, and this
+repository has chosen the floating side deliberately.
+
 **.NET for Android cannot be built on a musl host, and this project's runner is Alpine. Every message the
 toolchain produces on the way to saying so names a missing file that is present.** Three CI rounds went
 into this and the first two fixed symptoms, so the messages are worth reading in the order they arrive.
@@ -0,0 +1,404 @@
+#!/usr/bin/env bash
+#
+# Builds, packages and publishes the macOS desktop client.
+#
+# The counterpart of scripts/release-windows.ps1, and deliberately the same shape: run by a person, on a
+# Mac that is not a CI runner, in two phases with the upload withheld until somebody has installed what
+# phase one built and walked the manual checks. docs/adr/0011-android-distribution.md rule 1 puts the
+# capability to ship somebody a build on a machine which is not a runner, and
+# docs/adr/0013-desktop-distribution-and-updates.md explains why the token that writes a Gitea release is
+# that capability: Velopack clients trust their feed and do not verify a package signature when they apply
+# it, so whoever can write a release can ship an update every install runs.
+#
+#   1. Without --upload: builds, signs, notarizes, packs, and stops. Nothing has left this machine
+#      except the notarization submission, which Apple sees and users do not.
+#   2. With --upload: asks for the forge token and publishes what phase one produced. It does not
+#      rebuild, so the bytes that reach users are the bytes that were installed and checked.
+#
+# ◆ WHAT IS DIFFERENT FROM THE WINDOWS SCRIPT, AND WHY.
+#
+# Signing is not optional here. On Windows an unsigned installer costs a SmartScreen dialog once per
+# user, which is why that script has no --signParams and says so. On macOS an un-notarized download is
+# refused outright by Gatekeeper — not warned about, refused — so the Developer ID certificate and the
+# notarization round trip are the price of the package being installable at all, not an improvement to
+# be bought later.
+#
+# ◆ CREDENTIALS COME FROM THE KEYCHAIN AND THE ENVIRONMENT, NOT FROM THIS FILE.
+#
+# Three values are read from the environment, and none of them is itself a secret — they name things the
+# keychain holds, and the keychain is what guards the private key and the App Store Connect credentials:
+#
+#   DODOSSH_SIGN_APP_IDENTITY      e.g. "Developer ID Application: DodoTech (TEAMID)"
+#   DODOSSH_SIGN_INSTALL_IDENTITY  e.g. "Developer ID Installer: DodoTech (TEAMID)"
+#   DODOSSH_NOTARY_PROFILE         the profile name given to `xcrun notarytool store-credentials`
+#
+# `security find-identity -v -p codesigning` lists the first two exactly as codesign wants them. The
+# third is created once per machine:
+#
+#   xcrun notarytool store-credentials DodoSSH \
+#     --apple-id you@example.com --team-id TEAMID --password <app-specific-password>
+#
+# The forge token is the one real secret, and it is prompted for rather than read from a file or the
+# environment, and only in the phase that needs it — for the reason the Windows script gives: the fewer
+# minutes a credential that can publish an update spends in a shell's memory the better.
+#
+# Usage:
+#   bash scripts/release-macos.sh
+#   bash scripts/release-macos.sh --upload
+#   bash scripts/release-macos.sh --skip-tests
+
+set -euo pipefail
+
+UPLOAD=0
+SKIP_TESTS=0
+
+for arg in "$@"; do
+    case "$arg" in
+        --upload)     UPLOAD=1 ;;
+        --skip-tests) SKIP_TESTS=1 ;;
+        *)
+            echo "Unknown argument: $arg" >&2
+            echo "Usage: bash scripts/release-macos.sh [--upload] [--skip-tests]" >&2
+            exit 1
+            ;;
+    esac
+done
+
+# ---- The contract with every installed client ---------------------------------------------------------
+
+# Velopack's identity for this application, and it is effectively irreversible for the reasons the Windows
+# script states — it is what an installed client matches an update against.
+#
+# ◆ THE SAME PACK ID AS WINDOWS, AND ON THIS PLATFORM IT IS VISIBLE.
+#
+# vpk names the bundle after the pack id, so this produces DodoSSH.Desktop.app rather than DodoSSH.app,
+# and that is what somebody sees in /Applications. It is kept anyway, because the alternative is worse:
+# a pack id of DodoSSH would put Velopack's install and its uninstall on ~/Library/Application Support/
+# DodoSSH, which is exactly where ClientPaths keeps the encrypted cache, the outbox of changes not yet
+# pushed and the device key. Sharing that directory would mean an uninstall silently taking a user's
+# un-synced work with it. The same reasoning, and the same conclusion, as the Windows script.
+#
+# What a person actually reads is CFBundleDisplayName, which build/macos/Info.plist.template sets to
+# DodoSSH. So the bundle keeps the id and the Dock shows the product.
+PACK_ID='DodoSSH.Desktop'
+PACK_TITLE='DodoSSH'
+PACK_AUTHORS='DodoTech'
+
+# The project's own forge. Never a DodoSSH deployment — ADR 0011 rule 2. The same URL is a constant in
+# VelopackUpdateChannel, and the two have to agree or the client polls somewhere nothing is published.
+# The owner is part of it: Gitea left a 301 at the old organisation's path, which a GET follows and an
+# upload does not.
+REPO_URL='https://git.dodotech.cloud/DodoTech-Public/DodoSSH'
+
+# A contract with VelopackUpdateChannel.MacReleaseChannel. Velopack's macOS default is also "osx", so
+# leaving it unsaid on both sides would work — but unsaid here and stated there is how a feed goes quiet
+# with no error at all: the client checks, finds nothing, and reports itself up to date forever.
+CHANNEL='osx'
+
+# ◆ ARM64 ONLY, AND THAT IS A DECISION RATHER THAN AN OVERSIGHT.
+#
+# Velopack keys a channel to one architecture, so shipping Intel too means a second channel, a second
+# publish, a second set of deltas and a second thing to keep in step with the client's channel picker.
+# That is all affordable. What is not currently affordable is testing it: nobody here has an Intel Mac,
+# and docs/manual-checks.md exists because this project does not ship desktop builds no one has run.
+# An x64 package built blind and published beside a checked arm64 one would be the only artefact in this
+# repository that reached users unverified.
+#
+# Adding it later is this constant, a second channel name in VelopackUpdateChannel, and a picker keyed on
+# RuntimeInformation.ProcessArchitecture — which reports X64 for a build running under Rosetta, so an
+# Intel build correctly stays on the Intel feed. The work is small; the check is the part that is missing.
+RUNTIME='osx-arm64'
+
+REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
+PROJECT="$REPO_ROOT/src/DodoSSH.Client.App/DodoSSH.Client.App.csproj"
+SOLUTION="$REPO_ROOT/DodoSSH.slnx"
+PUBLISH_DIR="$REPO_ROOT/publish/$RUNTIME"
+RELEASES_DIR="$REPO_ROOT/Releases"
+ICON="$REPO_ROOT/src/DodoSSH.Client.App/Assets/dodossh.icns"
+ENTITLEMENTS="$REPO_ROOT/build/macos/DodoSSH.entitlements"
+PLIST_TEMPLATE="$REPO_ROOT/build/macos/Info.plist.template"
+
+write_step() { printf '\n\033[36m==> %s\033[0m\n' "$1"; }
+stop_with()  { printf '\n\033[31m%s\033[0m\n' "$1" >&2; exit 1; }
+
+# ---- Is this machine able to do the job at all? -------------------------------------------------------
+
+if [ "$(uname -s)" != 'Darwin' ]; then
+    # codesign, notarytool and stapler are Apple tooling and exist nowhere else. The build and even the
+    # .app bundle cross-compile fine from Windows or Linux — `vpk [osx] bundle` does exactly that, and
+    # ci.yml uses it to prove the bundle still builds — but a signed, notarized, installable package
+    # cannot be produced anywhere but here.
+    stop_with 'This builds a signed macOS package and has to run on macOS.'
+fi
+
+for tool in dotnet git xcrun codesign; do
+    command -v "$tool" >/dev/null 2>&1 || stop_with "$tool is not on PATH."
+done
+
+# Checked before anything is built rather than at the step that uses them. Notarization is the last thing
+# this script does and the slowest, and discovering there that a profile name was never exported means
+# throwing away a full build and test run.
+for required in DODOSSH_SIGN_APP_IDENTITY DODOSSH_SIGN_INSTALL_IDENTITY DODOSSH_NOTARY_PROFILE; do
+    if [ -z "${!required-}" ]; then
+        stop_with "$required is not set. See the header of this script for what the three are and how to make them."
+    fi
+done
+
+cd "$REPO_ROOT"
+
+# ---- What is being released ---------------------------------------------------------------------------
+
+# Restored before the version is read, and both halves are load-bearing — the same two traps the Windows
+# script documents. -t:MinVer, because -getProperty alone evaluates the project and runs no targets, while
+# MinVer sets Version from inside one, so the read would answer the SDK's default 1.0.0 regardless of the
+# tag. And a restore first, because naming a target that arrives with a package fails MSB4057 on a clean
+# clone where obj/ has no MinVer targets to import yet.
+write_step 'Restoring the desktop head, so the version can be read'
+dotnet restore "$PROJECT" --locked-mode || stop_with 'Restore failed.'
+
+VERSION="$(dotnet msbuild "$PROJECT" -getProperty:Version -t:MinVer -nologo | tr -d '[:space:]')"
+[ -n "$VERSION" ] || stop_with 'Could not read the version from MSBuild.'
+
+TAG="v$VERSION"
+
+# Apple's two version keys take one to three dot-separated integers and nothing else, so a prerelease
+# version has to have its suffix removed before it reaches the plist. 1.2.3-rc.1 becomes 1.2.3.
+#
+# The full version, suffix and all, is what vpk packs and what the release index carries, so the updater
+# still tells an rc from the release it precedes. These two keys are for Finder and Gatekeeper, which
+# care that the string parses and not what it says. See build/macos/Info.plist.template.
+PLIST_VERSION="${VERSION%%-*}"
+PLIST_VERSION="${PLIST_VERSION%%+*}"
+
+write_step "DodoSSH $VERSION  ($PACK_ID, channel $CHANNEL, $RUNTIME)"
+
+# ---- Phase 2: publish what phase 1 built --------------------------------------------------------------
+
+if [ "$UPLOAD" -eq 1 ]; then
+    # The installer package is the artefact a person downloads, so its absence is the honest test of
+    # whether phase one ever ran. A directory holding only a .nupkg is a pack that failed part way.
+    if ! ls "$RELEASES_DIR"/*.pkg >/dev/null 2>&1; then
+        stop_with "Nothing to upload: $RELEASES_DIR has no .pkg. Run this without --upload first."
+    fi
+
+    echo "About to publish the contents of $RELEASES_DIR to $REPO_URL as $TAG."
+    echo 'Only do this once you have installed it and walked Phase 18 of docs/manual-checks.md.'
+
+    # -s so the token is never echoed and never lands in the shell's history.
+    printf 'Gitea token (write:repository): '
+    read -r -s TOKEN
+    echo
+
+    [ -n "$TOKEN" ] || stop_with 'No token given.'
+
+    # --merge because Gitea already has a release entry for the pushed tag — and on this platform it may
+    # also already hold the Windows package for the same tag, which is the case --merge is really doing
+    # the work for: without it the second platform to publish a given version fails on a release that
+    # exists, and with it the two sit side by side under one tag. --channel keeps the indexes apart.
+    UPLOAD_ARGS=(
+        upload gitea
+        --repoUrl "$REPO_URL"
+        --token "$TOKEN"
+        --outputDir "$RELEASES_DIR"
+        --channel "$CHANNEL"
+        --releaseName "$TAG"
+        --tag "$TAG"
+        --merge
+        --publish
+    )
+
+    # Mirrors the rule the docker image job and the Windows script already apply to the same tag, so a
+    # release candidate is a prerelease in every channel or in none.
+    case "$VERSION" in
+        *-*) UPLOAD_ARGS+=(--pre) ;;
+    esac
+
+    write_step 'Uploading'
+    dotnet vpk "${UPLOAD_ARGS[@]}" || stop_with 'vpk upload failed.'
+
+    write_step "Published $TAG."
+    exit 0
+fi
+
+# ---- Phase 1: build, sign, notarize, pack -------------------------------------------------------------
+
+[ -z "$(git status --porcelain)" ] || stop_with 'The working tree is not clean. A release is cut from a commit, not from a desk.'
+
+HEAD_TAG="$(git describe --exact-match --tags HEAD 2>/dev/null || true)"
+[ -n "$HEAD_TAG" ] || stop_with "HEAD is not tagged. Tag it $TAG first, or change the version and tag that."
+
+# Cannot happen while MinVer is deriving the version from this very tag, and checked anyway: the day
+# somebody pins a version by hand this is the guard that notices.
+[ "$HEAD_TAG" = "$TAG" ] || stop_with "HEAD is tagged $HEAD_TAG but the computed version is $VERSION."
+
+write_step 'Restoring tools'
+dotnet tool restore || stop_with 'dotnet tool restore failed.'
+
+write_step 'Restoring packages (locked, exactly as CI does)'
+dotnet restore "$SOLUTION" --locked-mode || stop_with 'Restore failed. A lock file that only works on Linux fails here.'
+
+write_step 'Building'
+dotnet build "$SOLUTION" --no-restore --configuration Release || stop_with 'Build failed.'
+
+if [ "$SKIP_TESTS" -eq 0 ]; then
+    # The end-to-end suite starts containers and takes minutes. It is run here anyway rather than taken
+    # on trust from CI, because a tag is the one build nobody is watching — and on this platform there is
+    # a second reason: CI has no macOS runner, so this is the only place the suite ever runs on a Mac at
+    # all. Everything docs/platform-flags.md lists as unverified on macOS is verified here or nowhere.
+    write_step 'Testing'
+    dotnet test "$SOLUTION" --no-build --configuration Release || stop_with 'Tests failed.'
+fi
+
+write_step "Publishing $RUNTIME"
+rm -rf "$PUBLISH_DIR"
+
+# Self-contained, and not single-file, for the reasons the Windows script gives: the native libraries ship
+# per RID and a self-extracting bundle breaks delta updates.
+#
+# RestoreLockedMode=false, and the lock files put back straight afterwards. A RID-specific publish resolves
+# a graph the committed lock files do not describe, because they are deliberately kept RID-free —
+# declaring a RID on the head writes a net10.0/<rid> target into every project it references transitively,
+# including DodoSSH.Contracts and DodoSSH.Crypto, and the API's Dockerfile then restores those with no RID
+# under locked mode and fails NU1004. Packaging the desktop client would have broken the server's image
+# build. The gate that matters is the locked solution restore above, which is untouched.
+dotnet publish "$PROJECT" \
+    --configuration Release \
+    --runtime "$RUNTIME" \
+    --self-contained true \
+    --output "$PUBLISH_DIR" \
+    -p:RestoreLockedMode=false \
+    || stop_with 'Publish failed.'
+
+# An unlocked restore rewrites the lock files it walked. Left there, the next commit would carry exactly
+# the change that breaks the image build. Safe to do bluntly because this script refuses to run on a dirty
+# tree, so anything modified here is its own.
+git checkout -- '*packages.lock.json' || stop_with 'Could not restore the lock files after publishing.'
+
+# Checked rather than assumed. A publish directory without Velopack.dll would pack into an installer for an
+# application that never checks for updates — which looks completely normal until the next release goes out
+# and nobody receives it.
+for required in DodoSSH Velopack.dll; do
+    [ -e "$PUBLISH_DIR/$required" ] || stop_with "$required is missing from $PUBLISH_DIR."
+done
+
+echo "  $(du -sh "$PUBLISH_DIR" | cut -f1) in $(find "$PUBLISH_DIR" -type f | wc -l | tr -d ' ') files"
+
+# ---- Signing the native libraries, before vpk signs anything ------------------------------------------
+
+# ◆ THIS LOOP IS WHY NOTARIZATION SUCCEEDS, AND IT LOOKS REDUNDANT.
+#
+# vpk signs the finished bundle itself, with `codesign -f -v --timestamp --options runtime --entitlements
+# <file> --deep`, and --deep is documented by Apple as the wrong way to sign nested code. Apple's guidance
+# is inside-out: sign each nested binary first, then the bundle around it. --deep does the reverse in one
+# pass and applies the outer entitlements to everything it touches.
+#
+# In practice --deep alone is where the failure recorded in docs/platform-flags.md comes from — a
+# notarization rejection that does not name the offending file, on a submission that took its time getting
+# there. Signing each dylib properly first means vpk's pass has nothing left to get wrong, and re-signing
+# an already correctly signed binary with -f is a no-op in effect.
+#
+# No --entitlements here, and that is the difference that matters. Entitlements belong on the main
+# executable; a dylib carrying allow-jit is at best meaningless and at worst a rejection.
+write_step 'Signing native libraries'
+
+# createdump is a Mach-O executable the runtime ships and it is signed like the libraries: a nested
+# executable that is not signed fails notarization exactly as an unsigned dylib does, and it is the one
+# people forget because it has no extension to grep for.
+NATIVE_COUNT=0
+while IFS= read -r -d '' binary; do
+    codesign --force --verbose=0 --timestamp --options runtime \
+        --sign "$DODOSSH_SIGN_APP_IDENTITY" "$binary" \
+        || stop_with "codesign failed on $binary"
+    NATIVE_COUNT=$((NATIVE_COUNT + 1))
+done < <(find "$PUBLISH_DIR" \( -name '*.dylib' -o -name 'createdump' \) -type f -print0)
+
+[ "$NATIVE_COUNT" -gt 0 ] || stop_with "No native binaries found under $PUBLISH_DIR, which cannot be right for a self-contained publish."
+echo "  signed $NATIVE_COUNT native binaries"
+
+# ---- The bundle's Info.plist --------------------------------------------------------------------------
+
+# Rendered rather than committed, because vpk copies a custom plist verbatim and substitutes nothing —
+# so a committed one would carry whatever version it was written with into every release afterwards.
+# See the header of build/macos/Info.plist.template.
+write_step "Rendering Info.plist for $PLIST_VERSION"
+RENDERED_PLIST="$(mktemp -t dodossh-plist)"
+trap 'rm -f "$RENDERED_PLIST"' EXIT
+
+sed "s/@VERSION@/$PLIST_VERSION/g" "$PLIST_TEMPLATE" > "$RENDERED_PLIST"
+
+# The placeholder is the whole mechanism, so its absence is checked rather than hoped for. A template
+# somebody edited into a literal version would otherwise sail through and pin every future release to it.
+grep -q '@VERSION@' "$PLIST_TEMPLATE" || stop_with "$PLIST_TEMPLATE has no @VERSION@ placeholder left in it."
+! grep -q '@VERSION@' "$RENDERED_PLIST" || stop_with 'Substitution into the rendered Info.plist did not take.'
+
+mkdir -p "$RELEASES_DIR"
+
+# The previous release, so a delta can be built against it. Tolerated when it finds nothing: the first
+# macOS release has no predecessor, and a hard failure here would make cutting it impossible.
+write_step 'Fetching the previous release, for deltas'
+if ! dotnet vpk download gitea --repoUrl "$REPO_URL" --outputDir "$RELEASES_DIR" --channel "$CHANNEL"; then
+    echo '  Nothing came down. This package will be full-only, which is right for a first release.'
+fi
+
+# ---- Pack, sign, notarize, staple ---------------------------------------------------------------------
+
+# One command does the rest, and it is worth knowing what it is doing on your behalf, because the slow
+# part is not local: it builds the .app from the published files, signs it with the Developer ID
+# certificate and the entitlements below, submits it to Apple with `xcrun notarytool submit --wait`,
+# staples the resulting ticket to the package, and then builds the .pkg installer and the release index.
+#
+# The notarization wait is the reason this step can take a quarter of an hour and occasionally much
+# longer — it is a queue at Apple, not a computation here, and vpk's own message says so.
+#
+# --signInstallIdentity is a different certificate from --signAppIdentity, and the pair is not
+# interchangeable: "Developer ID Application" signs the bundle, "Developer ID Installer" signs the .pkg.
+# Passing one where the other belongs fails with a message about an identity that cannot be found, which
+# reads like a keychain problem rather than like the wrong certificate.
+write_step 'Packing, signing and notarizing (the notarization wait is Apple queueing, not this machine)'
+
+dotnet vpk pack \
+    --packId "$PACK_ID" \
+    --packVersion "$VERSION" \
+    --packDir "$PUBLISH_DIR" \
+    --packTitle "$PACK_TITLE" \
+    --packAuthors "$PACK_AUTHORS" \
+    --mainExe 'DodoSSH' \
+    --icon "$ICON" \
+    --plist "$RENDERED_PLIST" \
+    --entitlements "$ENTITLEMENTS" \
+    --signAppIdentity "$DODOSSH_SIGN_APP_IDENTITY" \
+    --signInstallIdentity "$DODOSSH_SIGN_INSTALL_IDENTITY" \
+    --notaryProfile "$DODOSSH_NOTARY_PROFILE" \
+    --runtime "$RUNTIME" \
+    --channel "$CHANNEL" \
+    --outputDir "$RELEASES_DIR" \
+    || stop_with 'vpk pack failed.'
+
+# ---- Did the notarization actually take? --------------------------------------------------------------
+
+# Asked rather than assumed, and this is the check worth having above all the others. A package whose
+# ticket did not staple is indistinguishable from a good one on the machine that built it — the Mac that
+# signed something trusts it locally — and reveals itself only on somebody else's machine, as a refusal
+# to open at all. spctl assesses it the way Gatekeeper will on a machine that has never seen this
+# certificate.
+write_step 'Verifying the notarization the way another Mac will'
+
+PKG="$(ls -t "$RELEASES_DIR"/*.pkg 2>/dev/null | head -n 1)"
+[ -n "$PKG" ] || stop_with 'vpk pack reported success but produced no .pkg.'
+
+if ! spctl --assess --type install --verbose=4 "$PKG"; then
+    stop_with "Gatekeeper rejects $PKG. It is signed but the notarization ticket is missing or stale; do not upload it."
+fi
+
+xcrun stapler validate "$PKG" || stop_with "The notarization ticket is not stapled to $PKG."
+
+write_step 'Built, notarized, and deliberately not uploaded'
+
+ls -lh "$RELEASES_DIR" | tail -n +2
+
+cat <<EOF
+
+Next:
+  1. Install the .pkg above and walk Phase 18 of docs/manual-checks.md.
+  2. Then: bash scripts/release-macos.sh --upload
+EOF
@@ -46,8 +46,11 @@ internal sealed class SessionKeepAlive : IDisposable
        this.activeTransfers = activeTransfers;
        this.holdsFileSession = holdsFileSession;

-        // Raised on whatever thread the pump unwound on, which is fine: starting and stopping a service is
-        // a binder call and needs no particular thread. Nothing here touches the interface.
+        // Raised on whatever thread the workspace announced from — a continuation of the ended run, or the
+        // closer's own — which is fine: starting and stopping a service is a binder call and needs no
+        // particular thread. Nothing here touches the interface. That the announcement waits for the run to
+        // actually complete, and comes for deliberate closes too, is what makes reading LiveSessionCount
+        // from it honest — the event's own remark carries the stuck notification that taught us both.
        workspace.SessionEnded += OnSessionEnded;
    }

@@ -0,0 +1,79 @@
+using global::Android.Views;
+
+namespace DodoSSH.Client.Android.Platform;
+
+/// <summary>
+/// Hands native focus back to the terminal's WebView after Avalonia chrome took it.
+/// </summary>
+/// <remarks>
+/// <para>
+/// <b>The sibling of <see cref="SoftKeyboard"/>, and it exists for the same reason that one does:</b> the
+/// keyboard over a terminal belongs to the WebView's own native view, which Avalonia's focus manager does
+/// not own. The accessory row's keys are already <c>Focusable=false</c> — see TerminalScreen — so Avalonia's
+/// idea of focus never leaves the terminal when one is tapped. What still moves is <em>Android's</em>:
+/// <c>AvaloniaView.DispatchTouchEvent</c> (decompiled from Avalonia.Android 12.1.1) ends every handled
+/// touch — DOWN and UP alike — with a <c>RequestFocus()</c> for Avalonia's own view. The WebView's input
+/// connection dies with its focus, the keyboard swaps to the layout it shows an editor that takes no text,
+/// and the inset churn that follows can leave it sitting on top of the very row that was tapped.
+/// </para>
+/// <para>
+/// <b>Posted, not called — the posting is the fix's second attempt, and the first one's failure is why.</b>
+/// The first version called <c>RequestFocus()</c> from the keys' own Click handlers, which fire
+/// <em>inside</em> the UP event's dispatch — and the platform's own request runs <em>after</em> dispatch
+/// returns, so it undid ours a few microseconds later and the terminal stayed unfocused. A posted runnable
+/// runs on the next main-looper message, after the platform has taken its turn, so ours is the request that
+/// sticks. The focus check lives inside the posted runnable for the same reason: the answer at call time is
+/// about to be made stale by the very mechanism this exists to counter.
+/// </para>
+/// <para>
+/// The page inside the WebView never noticed any of this — its own DOM focus never moved — so regaining
+/// native focus re-establishes the same input connection and the keyboard settles back to what it was.
+/// </para>
+/// <para>
+/// Found by walking the decor view rather than asked of the <c>NativeWebView</c> control, because the
+/// control does not expose its platform child and this application only ever has the one WebView — the
+/// walk's first match is necessarily the terminal. Every step is allowed to be absent, exactly as
+/// <see cref="SoftKeyboard.Hide"/>'s are: no activity while backgrounded, no WebView while the terminal
+/// surface has never been shown, and nothing to do in either case.
+/// </para>
+/// </remarks>
+internal static class TerminalFocus
+{
+    public static void Return()
+    {
+        if (PhoneEnvironment.CurrentActivity?.Window?.DecorView is not ViewGroup decor)
+        {
+            return;
+        }
+
+        if (FindWebView(decor) is not { } webView)
+        {
+            return;
+        }
+
+        webView.Post(() =>
+        {
+            if (!webView.IsFocused)
+            {
+                webView.RequestFocus();
+            }
+        });
+    }
+
+    private static View? FindWebView(ViewGroup parent)
+    {
+        for (var i = 0; i < parent.ChildCount; i++)
+        {
+            switch (parent.GetChildAt(i))
+            {
+                case global::Android.Webkit.WebView webView:
+                    return webView;
+
+                case ViewGroup child when FindWebView(child) is { } found:
+                    return found;
+            }
+        }
+
+        return null;
+    }
+}
@@ -116,11 +116,27 @@
    <Setter Property="FontWeight" Value="SemiBold" />
  </Style>

-  <!-- A row in a list: the whole row is the target, and it is 54 tall because a thumb is not a mouse. -->
+  <!--
+    A row in a list: the whole row is the target, and it is 54 tall because a thumb is not a mouse.
+
+    ◆ VerticalContentAlignment, because that height is the whole point of this class and Avalonia's default
+    for content alignment is Stretch — so the content presenter stretched the caption to the full row and a
+    TextBlock draws its line at the TOP of what it is given. Most rows here never showed it, having a
+    StackPanel or a Grid of already-centred children in them, which is what made the four that did look
+    like four unrelated mistakes: the breadcrumb chips and the up-one-directory button on FilesScreen, and
+    TerminalScreen's CLOSE THIS TAB, each a bare TextBlock in a row 36 or 44 tall with no vertical padding.
+    Measured at those numbers, the caption sat flush against the top edge with 21 to 33 pixels below it.
+
+    The desktop head's App.axaml carries the same setter on its own shapes for the same reason, and excludes
+    two of them — see the remark on Button.ghost there. Nothing is excluded here: no row's content depends
+    on being stretched, there being no full-height strip inside any of the thirty-three, and the Grids that
+    stop filling hold only children that already centre themselves, so they land where they always did.
+  -->
  <Style Selector="Button.row">
    <Setter Property="MinHeight" Value="54" />
    <Setter Property="HorizontalAlignment" Value="Stretch" />
    <Setter Property="HorizontalContentAlignment" Value="Stretch" />
+    <Setter Property="VerticalContentAlignment" Value="Center" />
    <Setter Property="Background" Value="Transparent" />
    <Setter Property="BorderThickness" Value="0" />
    <Setter Property="CornerRadius" Value="10" />
@@ -420,6 +436,20 @@
    <Setter Property="Fill" Value="{StaticResource Live}" />
  </Style>

+  <!--
+    Amber, and it does not contradict the remark above. That one says green is a fact about a host rather
+    than an accent, and this is the colour for a fact that is not settled yet: green is what is true, purple
+    is what you can press, and a connection still being made is neither. The palette's own rule gives amber
+    to the caveat worth reading, which is exactly what this is.
+
+    Only the tab strips use it, and only for a tab with no shell behind it yet — the same amber, from the
+    same brush, as the track and the running step on the connecting screen, so that a tab and the screen it
+    opens agree about what is happening. See TerminalScreen.axaml.
+  -->
+  <Style Selector="Ellipse.dot.connecting">
+    <Setter Property="Fill" Value="{StaticResource Warn}" />
+  </Style>
+
  <!-- Every label, count, address and fingerprint in this design is monospace. See Palette.axaml. -->
  <Style Selector="TextBlock.mono">
    <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
@@ -48,7 +48,7 @@
    the refusal has no continue button here either.
  -->

-  <Grid RowDefinitions="Auto,Auto,Auto,Auto,Auto,*,Auto">
+  <Grid RowDefinitions="Auto,Auto,Auto,Auto,Auto,Auto,*,Auto">

    <!-- ============ header ============ -->
    <Grid Grid.Row="0" ColumnDefinitions="Auto,Auto,*,Auto" Height="56" Margin="8,0">
@@ -174,8 +174,31 @@
      </StackPanel>
    </Border>

+    <!-- ============ ◆ typing where to go ============ -->
+    <!--
+      The breadcrumb below reaches only what is under the directory already listed, so crossing a host's
+      filesystem was a tap and a round trip a level and a path somebody already knew could not be entered at
+      all. This is the way in for one that is: absolute, relative to the directory showing, or starting at
+      ~. See SftpPath.Resolve.
+
+      GO is a real button rather than only the keyboard's own action key, and that is a phone decision: a
+      software keyboard's return key is whatever the IME decided to draw, this application does not set the
+      IME action, and a path box whose only commit was a key that may say "newline" would be a box nothing
+      could be submitted from. The Enter binding stays for the hardware keyboards this head does meet.
+    -->
+    <Grid Grid.Row="3" ColumnDefinitions="*,8,Auto" Margin="14,0,14,6" IsVisible="{Binding IsConnected}">
+      <TextBox Grid.Column="0" Classes="field" Text="{Binding RemotePathDraft}"
+               PlaceholderText="/path/to/somewhere">
+        <TextBox.KeyBindings>
+          <KeyBinding Gesture="Enter" Command="{Binding GoToTypedRemotePathCommand}" />
+        </TextBox.KeyBindings>
+      </TextBox>
+      <Button Grid.Column="2" Classes="secondary" Height="44" Padding="16,0" Content="GO"
+              Command="{Binding GoToTypedRemotePathCommand}" />
+    </Grid>
+
    <!-- ============ where we are ============ -->
-    <ScrollViewer Grid.Row="3" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Disabled"
+    <ScrollViewer Grid.Row="4" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Disabled"
                  IsVisible="{Binding IsConnected}" Margin="0,0,0,4">
      <StackPanel Orientation="Horizontal" Spacing="4" Margin="14,0" VerticalAlignment="Center">
        <Button Classes="row" MinHeight="36" Padding="9,0" CornerRadius="10"
@@ -215,7 +238,7 @@
      answers: an empty scrolling strip under the breadcrumb would read as a loading row rather than as
      "this host has nothing pinned".
    -->
-    <ScrollViewer Grid.Row="4" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Disabled"
+    <ScrollViewer Grid.Row="5" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Disabled"
                  IsVisible="{Binding HasConnectedPins}" Margin="0,0,0,4">
      <ItemsControl ItemsSource="{Binding ConnectedPinnedPaths}">
        <ItemsControl.ItemsPanel>
@@ -240,7 +263,7 @@
    </ScrollViewer>

    <!-- ============ the listing ============ -->
-    <Panel Grid.Row="5">
+    <Panel Grid.Row="6">

      <TextBlock Classes="body" IsVisible="{Binding !IsConnected}" Margin="24,12"
                 VerticalAlignment="Top" Text="{Binding Status}" />
@@ -306,7 +329,7 @@

    <!-- ============ what to do with the chosen entry ============ -->
    <!-- DeepChrome rather than Chrome, since v5 — see the remark on PhoneShell's vault header. -->
-    <Border Grid.Row="6" IsVisible="{Binding IsConnected}" Background="{StaticResource DeepChrome}"
+    <Border Grid.Row="7" IsVisible="{Binding IsConnected}" Background="{StaticResource DeepChrome}"
            BorderBrush="{StaticResource Border}" BorderThickness="0,1,0,0" Padding="12,10">
      <StackPanel Spacing="9">

@@ -328,6 +351,36 @@
          </StackPanel>
        </Border>

+        <!--
+          ◆ Renaming and moving, in the place the deletion question already occupies and never at the same
+          time as it. One form for both — see RemoteMoveRequest for why the two questions share a shape and
+          differ only in their words — and no danger colours on it, because a rename is undone by renaming
+          back and the deletion above is the one thing here that nothing can walk back.
+        -->
+        <Border IsVisible="{Binding IsMovingRemote}" Background="{StaticResource Raised}"
+                BorderBrush="{StaticResource Border}" BorderThickness="1" CornerRadius="12"
+                Padding="13,11">
+          <StackPanel Spacing="6">
+            <TextBlock Classes="mono" FontSize="12" TextWrapping="Wrap"
+                       Text="{Binding PendingRemoteMove.Question}" />
+            <TextBlock Classes="detail" TextWrapping="Wrap" Text="{Binding PendingRemoteMove.FullPath}" />
+            <TextBox Classes="field" Text="{Binding RemoteMoveTarget}"
+                     PlaceholderText="{Binding PendingRemoteMove.FieldHint}">
+              <TextBox.KeyBindings>
+                <KeyBinding Gesture="Enter" Command="{Binding ConfirmMoveRemoteCommand}" />
+              </TextBox.KeyBindings>
+            </TextBox>
+            <TextBlock Classes="body" Text="{Binding PendingRemoteMove.Note}" />
+            <Grid ColumnDefinitions="*,8,*" Margin="0,4,0,0">
+              <Button Grid.Column="0" Classes="primary" Height="44"
+                      Content="{Binding PendingRemoteMove.ConfirmLabel}"
+                      Command="{Binding ConfirmMoveRemoteCommand}" IsEnabled="{Binding !IsBusy}" />
+              <Button Grid.Column="2" Classes="secondary" Height="44" Content="CANCEL"
+                      Command="{Binding CancelMoveRemoteCommand}" />
+            </Grid>
+          </StackPanel>
+        </Border>
+
        <!--
          ◆ The queue, above the actions and only when it has something in it. Bounded and scrolling rather
          than growing: five files queued must not push the buttons off the bottom of the screen, which on a
@@ -386,20 +439,32 @@
          save picker names one destination. CanDownload is the desktop's own flag for the same question —
          a file is selected and something is connected — and is reused rather than restated here.
        -->
-        <Grid ColumnDefinitions="*,8,*" IsVisible="{Binding !IsConfirmingRemoteDeletion}">
+        <Grid ColumnDefinitions="*,8,*" IsVisible="{Binding !IsAskingAboutRemoteEntry}">
          <Button Grid.Column="0" Classes="primary" Height="44" Content="ADD FILES" Click="OnAddFiles" />
          <Button Grid.Column="2" Classes="secondary" Height="44" Content="SAVE FILE" Click="OnSaveFile"
                  IsEnabled="{Binding CanDownload}" />
        </Grid>

-        <Grid ColumnDefinitions="*,8,*" IsVisible="{Binding !IsConfirmingRemoteDeletion}">
+        <!--
+          ◆ The two that put a file right rather than taking it away, above the row DELETE is on and away
+          from it. Both open a form in place of these buttons — see the card above — because a phone has
+          nowhere to put a text field except where something else already was.
+        -->
+        <Grid ColumnDefinitions="*,8,*" IsVisible="{Binding !IsAskingAboutRemoteEntry}">
+          <Button Grid.Column="0" Classes="secondary" Height="44" Content="RENAME"
+                  Command="{Binding RenameRemoteCommand}" IsEnabled="{Binding CanRenameRemote}" />
+          <Button Grid.Column="2" Classes="secondary" Height="44" Content="MOVE"
+                  Command="{Binding MoveRemoteCommand}" IsEnabled="{Binding CanMoveRemote}" />
+        </Grid>
+
+        <Grid ColumnDefinitions="*,8,*" IsVisible="{Binding !IsAskingAboutRemoteEntry}">
          <Button Grid.Column="0" Classes="secondary" Height="44" Content="DELETE"
                  Command="{Binding DeleteRemoteCommand}" IsEnabled="{Binding CanDeleteRemote}" />
          <Button Grid.Column="2" Classes="secondary" Height="44" Content="CLOSE"
                  Command="{Binding DisconnectCommand}" />
        </Grid>

-        <TextBlock Classes="body" IsVisible="{Binding !IsConfirmingRemoteDeletion}"
+        <TextBlock Classes="body" IsVisible="{Binding !IsAskingAboutRemoteEntry}"
                   Text="ADD FILES picks documents to send. SAVE FILE asks where the selected file should be kept — the file is created there when you choose it, so a transfer that fails leaves it empty." />

        <TextBlock Classes="detail" Foreground="{StaticResource TextDim}" TextWrapping="Wrap"
@@ -1029,6 +1029,48 @@
            </ComboBox.ItemTemplate>
          </ComboBox>

+          <!--
+            Making a credential without leaving the host, as on the desktop and on the same reasoning: the
+            moment one is wanted is while deciding how a host authenticates, and this head has no keychain
+            editor for credentials at all — so without this a phone could bind a host to a credential but
+            never make one. Writes to the keychain the instant ADD is pressed, exactly as the new-tag box
+            below does and for the same reason: a host can only name an id that exists.
+          -->
+          <Button Classes="secondary" Content="+ NEW CREDENTIAL" HorizontalAlignment="Left"
+                  MinHeight="40" Padding="14,0"
+                  IsVisible="{Binding !IsAddingEditorCredential}"
+                  Command="{Binding BeginEditorCredentialCommand}" />
+
+          <Border CornerRadius="12" Background="{StaticResource Field}"
+                  BorderBrush="{StaticResource Border}" BorderThickness="1" Padding="12"
+                  IsVisible="{Binding IsAddingEditorCredential}">
+            <StackPanel Spacing="8">
+              <TextBlock Classes="label" Text="NEW CREDENTIAL" />
+              <TextBox Classes="field" Text="{Binding EditorNewCredentialLabel}"
+                       PlaceholderText="name" />
+              <!--
+                Optional, and what makes a credential its own item: one account on twenty machines is
+                rotated in one place. Left blank, this host's own username is used.
+              -->
+              <TextBox Classes="field" Text="{Binding EditorNewCredentialUsername}"
+                       PlaceholderText="username (blank: this host's own)" />
+              <TextBox Classes="field secret" Text="{Binding EditorNewCredentialPassword}"
+                       PlaceholderText="password" />
+              <TextBox Classes="field" Text="{Binding EditorNewCredentialNotes}"
+                       PlaceholderText="notes" />
+              <TextBlock Classes="detail" TextWrapping="Wrap"
+                         Text="Added to the keychain as soon as you press ADD, so it stays even if you leave this host without saving." />
+              <Grid ColumnDefinitions="*,8,*">
+                <Button Grid.Column="0" Classes="primary" Content="ADD" MinHeight="44"
+                        HorizontalAlignment="Stretch" HorizontalContentAlignment="Center"
+                        Command="{Binding AddEditorCredentialCommand}" />
+                <Button Grid.Column="2" Classes="secondary" Content="CANCEL" MinHeight="44"
+                        HorizontalAlignment="Stretch" HorizontalContentAlignment="Center"
+                        Command="{Binding CancelEditorCredentialCommand}" />
+              </Grid>
+            </StackPanel>
+          </Border>
+
          <!--
            ◆ WHICH VAULT THIS HOST WILL LIVE IN. Drawn only while adding and only where there is more than
            one vault that can be written to, exactly as on the desktop — an existing host's vault is not a
@@ -320,8 +320,14 @@
                        which was true when a tab could not exist without a session; one can now —
                        connecting opens the tab first — and a dot that was green before anything had
                        answered would be the one thing on this strip claiming something untrue.
+
+                        Amber while it is being made, which is the other half of that correction. Not being
+                        green stopped the dot lying, but it left a tab still dialling drawn exactly like a
+                        tab whose shell has exited — the two states on this strip with the least in common,
+                        one worth waiting for and one over. See Phone.axaml.
                      -->
-                      <Ellipse Classes="dot" Classes.live="{Binding IsLive}" Width="6" Height="6"
+                      <Ellipse Classes="dot" Classes.live="{Binding IsLive}"
+                               Classes.connecting="{Binding IsConnecting}" Width="6" Height="6"
                               VerticalAlignment="Center" />
                      <TextBlock Classes="mono" FontSize="11" Text="{Binding Label}" />
                    </StackPanel>
@@ -33,6 +33,85 @@
    gesture does the same thing the arrow does.
  -->

+  <UserControl.Styles>
+
+    <!--
+      ── the connecting step list ─────────────────────────────────────────────────────────────────────
+      The same five rows the desktop's ConnectingCard draws, from the same reported phases, in this head's
+      own sizes. Kept here rather than in Phone.axaml because nothing else on this head has a step list —
+      the theme file is for what more than one screen shares, and a rule that exists for one control is
+      easier to read beside it.
+
+      Amber for the step in flight, green behind it, red where it stopped. That is the palette's rule
+      rather than an exception to it: green is what is true and purple is what you can press, and a step
+      still happening is neither. See ConnectingCard.axaml for the longer version of this argument, and
+      Palette.axaml for the rule itself.
+
+      A phone needs this more than a desktop does, which is the same thing the connecting block below
+      already says about itself: mobile links are slower and drop more often, so the stretch this describes
+      is longer here and more likely to end badly.
+    -->
+    <!--
+      Its own FontFamily rather than the row also carrying the mono class, which is this head's convention
+      and not a stylistic preference: Phone.axaml's mono sets a colour and a size along with the family, so
+      a caption wearing both classes would be asking two rules for one Foreground and settling it on style
+      ordering. Every other text class here — body, label, title, detail — names its own family for exactly
+      that reason. The desktop's mono sets the family alone, which is why ConnectingCard composes the two
+      and this does not.
+    -->
+    <Style Selector="TextBlock.stepcaption">
+      <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
+      <Setter Property="Foreground" Value="{StaticResource TextFaint}" />
+      <Setter Property="FontSize" Value="11" />
+      <Setter Property="VerticalAlignment" Value="Center" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.done">
+      <Setter Property="Foreground" Value="{StaticResource TextDim}" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.running">
+      <Setter Property="Foreground" Value="{StaticResource WarnText}" />
+      <Setter Property="FontWeight" Value="SemiBold" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.stopped">
+      <Setter Property="Foreground" Value="{StaticResource DangerText}" />
+    </Style>
+
+    <!-- Fixed width and centred: four different characters on a ragged edge is a list that looks broken. -->
+    <Style Selector="TextBlock.stepmark">
+      <Setter Property="Foreground" Value="{StaticResource BorderMid}" />
+      <Setter Property="FontSize" Value="11" />
+      <Setter Property="Width" Value="13" />
+      <Setter Property="TextAlignment" Value="Center" />
+      <Setter Property="VerticalAlignment" Value="Center" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.done">
+      <Setter Property="Foreground" Value="{StaticResource Live}" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.running">
+      <Setter Property="Foreground" Value="{StaticResource Warn}" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.stopped">
+      <Setter Property="Foreground" Value="{StaticResource Danger}" />
+    </Style>
+
+    <!--
+      4 rather than the desktop's 5, which is the only deliberate difference between the two heads here:
+      this bar sits in a column 24 from each edge of a 360dp screen rather than under a 460-wide card, so
+      the same height reads as a heavier rule across a narrower span.
+    -->
+    <Style Selector="ProgressBar.steptrack">
+      <Setter Property="Height" Value="4" />
+      <Setter Property="MinHeight" Value="4" />
+      <Setter Property="CornerRadius" Value="2" />
+      <Setter Property="Background" Value="{StaticResource Chip}" />
+      <Setter Property="Foreground" Value="{StaticResource Warn}" />
+    </Style>
+    <Style Selector="ProgressBar.steptrack.stopped">
+      <Setter Property="Foreground" Value="{StaticResource Danger}" />
+    </Style>
+
+  </UserControl.Styles>
+
  <Panel>

  <Grid RowDefinitions="Auto,*,Auto">
@@ -97,8 +176,12 @@
                            Command="{Binding $parent[views:TerminalScreen].((vm:MainWindowViewModel)DataContext).SelectTabCommand}"
                            CommandParameter="{Binding}">
                      <StackPanel Orientation="Horizontal" Spacing="7" VerticalAlignment="Center">
-                        <!-- Green only while there is a shell behind it; see the same dot in PhoneShell. -->
-                        <Ellipse Classes="dot" Classes.live="{Binding IsLive}" Width="6" Height="6"
+                        <!--
+                          Green only while there is a shell behind it, amber while one is being made; see
+                          the same dot in PhoneShell, and Phone.axaml for why amber is not a rule broken.
+                        -->
+                        <Ellipse Classes="dot" Classes.live="{Binding IsLive}"
+                                 Classes.connecting="{Binding IsConnecting}" Width="6" Height="6"
                                 VerticalAlignment="Center" />
                        <TextBlock Classes="mono" FontSize="12" FontWeight="SemiBold"
                                   Text="{Binding Label}" />
@@ -284,11 +367,70 @@
        <TextBlock Classes="title" FontSize="13" Text="{Binding SelectedTab.Label}" />
        <TextBlock Classes="detail" FontSize="11" Foreground="{StaticResource TextDim}"
                   TextWrapping="Wrap" Text="{Binding SelectedTab.Address}" />
-        <TextBlock Classes="body" Text="{Binding SelectedTab.Status}" />
-        <Button Classes="row" MinHeight="44" Padding="14,0" HorizontalAlignment="Left"
-                Command="{Binding CloseTabCommand}" CommandParameter="{Binding SelectedTab}">
-          <TextBlock Classes="label" FontSize="9" Text="CLOSE THIS TAB" />
-        </Button>
+
+        <!--
+          Where a single unchanging "connecting…" used to be. The track counts steps that really finished
+          against the five there are — StepsDone over StepCount, never a percentage, because the arithmetic
+          that makes a percentage is the arithmetic that starts inventing one. See TerminalTabViewModel.
+
+          Drawn for both states rather than once per state: a refused connection has the same five rows and
+          the same track, and the only differences are that one row is red and the track stops where it got
+          to. Two templates kept identical for the sake of a colour is how the two drift apart.
+        -->
+        <ProgressBar Classes="steptrack" Classes.stopped="{Binding SelectedTab.IsFailed}"
+                     Minimum="0" Maximum="{Binding SelectedTab.StepCount}"
+                     Value="{Binding SelectedTab.StepsDone, Mode=OneWay}" />
+
+        <ItemsControl ItemsSource="{Binding SelectedTab.Steps}">
+          <ItemsControl.ItemsPanel>
+            <ItemsPanelTemplate>
+              <StackPanel Spacing="6" />
+            </ItemsPanelTemplate>
+          </ItemsControl.ItemsPanel>
+          <ItemsControl.ItemTemplate>
+            <DataTemplate x:DataType="vm:ConnectionStepViewModel">
+              <StackPanel Orientation="Horizontal" Spacing="9">
+                <TextBlock Classes="stepmark"
+                           Classes.done="{Binding IsDone}"
+                           Classes.running="{Binding IsRunning}"
+                           Classes.stopped="{Binding IsStopped}"
+                           Text="{Binding Mark}" />
+                <TextBlock Classes="stepcaption"
+                           Classes.done="{Binding IsDone}"
+                           Classes.running="{Binding IsRunning}"
+                           Classes.stopped="{Binding IsStopped}"
+                           Text="{Binding Caption}" />
+              </StackPanel>
+            </DataTemplate>
+          </ItemsControl.ItemTemplate>
+        </ItemsControl>
+
+        <!--
+          Only for a refusal now. While a connection is being made this used to be the whole of what this
+          screen said, and it is now the step list's running row said twice — so it is shown for the one
+          state the list cannot put into words: why it stopped.
+        -->
+        <TextBlock Classes="body" Text="{Binding SelectedTab.Status}"
+                   Foreground="{StaticResource Danger}"
+                   IsVisible="{Binding SelectedTab.IsFailed}" />
+
+        <!--
+          Two 44-high targets side by side rather than one, and the second is the logs: the step list is
+          this attempt and the log is every other one, which is the question a connection that is taking too
+          long on a mobile link actually raises — has this machine ever worked from here. Reached the
+          ordinary way, through ShowScreenCommand, exactly as the rail and MORE reach it.
+        -->
+        <StackPanel Orientation="Horizontal" Spacing="8" HorizontalAlignment="Left">
+          <Button Classes="row" MinHeight="44" Padding="14,0"
+                  Command="{Binding CloseTabCommand}" CommandParameter="{Binding SelectedTab}">
+            <TextBlock Classes="label" FontSize="9" Text="CLOSE THIS TAB" />
+          </Button>
+          <Button Classes="row" MinHeight="44" Padding="14,0"
+                  Command="{Binding ShowScreenCommand}"
+                  CommandParameter="{x:Static vm:ShellScreen.Logs}">
+            <TextBlock Classes="label" FontSize="9" Text="SHOW LOGS" />
+          </Button>
+        </StackPanel>
      </StackPanel>

      <!--
@@ -139,48 +139,18 @@ internal sealed partial class TerminalScreen : UserControl
    {
        var row = this.FindControl<StackPanel>("AccessoryKeys")!;

+        // Both halves of a press steal Android's own focus — the platform requests it for Avalonia's view
+        // after dispatching every handled touch, DOWN and UP alike; TerminalFocus carries the decompiled
+        // citation. Countered at the row rather than inside each key's Click, and for two reasons: Click
+        // only exists for the UP half, so a keyboard detached at DOWN would stay detached for the whole
+        // length of the press; and the Return is posted past the current dispatch, so its ordering against
+        // the key's own handler does not matter — which is what lets one pair of handlers cover ten keys.
+        row.AddHandler(PointerPressedEvent, (_, _) => TerminalFocus.Return(), RoutingStrategies.Tunnel);
+        row.AddHandler(PointerReleasedEvent, (_, _) => TerminalFocus.Return(), RoutingStrategies.Tunnel);
+
        foreach (var (label, bytes, latches) in Keys)
        {
-            var key = new Button
-            {
-                Content = new TextBlock
-                {
-                    Text = label,
-                    FontFamily = (FontFamily)Application.Current!.FindResource("MonoFont")!,
-                    FontSize = 11,
-                    HorizontalAlignment = HorizontalAlignment.Center,
-                    VerticalAlignment = VerticalAlignment.Center,
-                },
-
-                // 44 wide, and that is the number that matters: the design draws these flexed across the
-                // width, which at 360dp with ten keys is 32 pixels each — under every thumb-target
-                // guideline there is. The height came down with the row it sits in, from 38 to 30, and it
-                // costs nothing a width does: the keys are a single row with the terminal above and the
-                // system's gesture bar below, so there is no neighbour a short press can land on instead.
-                MinWidth = 44,
-                Height = 30,
-                Padding = new Thickness(10, 0),
-                CornerRadius = new CornerRadius(9),
-                Background = Palette("Panel"),
-                BorderBrush = Palette("BorderMid"),
-                BorderThickness = new Thickness(1),
-                Foreground = Palette("TextDim"),
-                HorizontalContentAlignment = HorizontalAlignment.Center,
-
-                // ◆ NOT FOCUSABLE, AND THAT IS THE WHOLE CONTROL RATHER THAN A DETAIL.
-                //
-                // These keys are an extension of the keyboard, not a place the keyboard should go. As
-                // ordinary buttons they took Avalonia's focus on tap, which takes it off the NativeWebView
-                // — and the package's own OnLostFocus then calls the adapter's ResignFocus(). So pressing
-                // Tab or an arrow handed the terminal one byte and took the keyboard away from it: the next
-                // thing typed on a hardware keyboard went nowhere, and the row went on working because its
-                // buttons are pressed rather than typed into, which is what makes it look like the terminal
-                // had died instead.
-                //
-                // Focusable=false is what a toolbar button is, and it means the focused element never
-                // changes: the WebView is still it, so nothing resigns and nothing has to be handed back.
-                Focusable = false,
-            };
+            var key = CreateKey(label);

            if (latches)
            {
@@ -196,6 +166,57 @@ internal sealed partial class TerminalScreen : UserControl
        }
    }

+    /// <summary>One key of the accessory row, before its click is wired.</summary>
+    /// <remarks>Split from <see cref="BuildAccessoryRow"/> for length rather than for reuse.</remarks>
+    private static Button CreateKey(string label) =>
+        new()
+        {
+            Content = new TextBlock
+            {
+                Text = label,
+                FontFamily = (FontFamily)Application.Current!.FindResource("MonoFont")!,
+                FontSize = 11,
+                HorizontalAlignment = HorizontalAlignment.Center,
+                VerticalAlignment = VerticalAlignment.Center,
+            },
+
+            // 44 wide, and that is the number that matters: the design draws these flexed across the
+            // width, which at 360dp with ten keys is 32 pixels each — under every thumb-target
+            // guideline there is. The height came down with the row it sits in, from 38 to 30, and it
+            // costs nothing a width does: the keys are a single row with the terminal above and the
+            // system's gesture bar below, so there is no neighbour a short press can land on instead.
+            MinWidth = 44,
+            Height = 30,
+            Padding = new Thickness(10, 0),
+            CornerRadius = new CornerRadius(9),
+            Background = Palette("Panel"),
+            BorderBrush = Palette("BorderMid"),
+            BorderThickness = new Thickness(1),
+            Foreground = Palette("TextDim"),
+            HorizontalContentAlignment = HorizontalAlignment.Center,
+
+            // ◆ NOT FOCUSABLE, AND THAT IS THE WHOLE CONTROL RATHER THAN A DETAIL.
+            //
+            // These keys are an extension of the keyboard, not a place the keyboard should go. As
+            // ordinary buttons they took Avalonia's focus on tap, which takes it off the NativeWebView
+            // — and the package's own OnLostFocus then calls the adapter's ResignFocus(). So pressing
+            // Tab or an arrow handed the terminal one byte and took the keyboard away from it: the next
+            // thing typed on a hardware keyboard went nowhere, and the row went on working because its
+            // buttons are pressed rather than typed into, which is what makes it look like the terminal
+            // had died instead.
+            //
+            // Focusable=false is what a toolbar button is, and it means the focused element never
+            // changes: the WebView is still it, so nothing resigns and nothing has to be handed back.
+            //
+            // At the Avalonia layer, that is. Android keeps a focus of its own, and the touch that
+            // presses one of these keys hands it to Avalonia's input view regardless of what Avalonia
+            // decides about its element — taking the keyboard's input connection off the terminal and
+            // swapping its layout mid-typing. The row's own pointer handlers in BuildAccessoryRow hand
+            // that half back; see TerminalFocus for the whole story, including why the handing back has
+            // to be posted rather than done inline.
+            Focusable = false,
+        };
+
    private void ToggleControl()
    {
        controlLatched = !controlLatched;
@@ -74,9 +74,9 @@
      },
      "Microsoft.NET.ILLink.Tasks": {
        "type": "Direct",
-        "requested": "[10.0.10, )",
-        "resolved": "10.0.10",
-        "contentHash": "f5VCIE7AJpd5YvzNTeMGVzQIgyE9tX+AreTYwQF+REbu+DZo/2Ae+jNSwhPEYrVz6RRkd7y8ubXjk6Nn6Ka+Cg=="
+        "requested": "[10.0.11, )",
+        "resolved": "10.0.11",
+        "contentHash": "IBf7lbovvjGWVWXZX5cJ/cO0WXbId0Zq4BuSeT94mGZuOAP66oMeH9PTBZ9Jpp3Jb6jtK0qm/NyUbPRo1gC/wQ=="
      },
      "MinVer": {
        "type": "Direct",
@@ -984,7 +984,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -1044,9 +1044,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -1140,11 +1140,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -153,6 +153,7 @@
      <Setter Property="CornerRadius" Value="6" />
      <Setter Property="Padding" Value="6,2" />
      <Setter Property="MinHeight" Value="0" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
      <Setter Property="Foreground" Value="{StaticResource TextDim}" />
      <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
      <Setter Property="FontWeight" Value="Medium" />
@@ -463,6 +464,7 @@
      <Setter Property="Padding" Value="13,7" />
      <Setter Property="HorizontalAlignment" Value="Stretch" />
      <Setter Property="HorizontalContentAlignment" Value="Left" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
      <Setter Property="CornerRadius" Value="12" />
    </Style>
    <Style Selector="Button.navuser /template/ ContentPresenter#PART_ContentPresenter">
@@ -473,26 +475,56 @@
      <Setter Property="Background" Value="{StaticResource Track}" />
    </Style>

+    <!--
+      The user popover itself: the panel the rail's chip opens, in this window's own idiom rather than the
+      theme's. The shared MenuFlyoutPresenter rule further down this file gives every popup Chrome and a
+      4-pixel radius, which is right for a context menu and wrong for this one — the design draws the account
+      menu as a rounded card, the same radius-12 shape as every other floating surface here. Reached with
+      FlyoutPresenterClasses from NavRail.axaml rather than by widening that rule, so a right-click menu two
+      screens away does not quietly become a card as well.
+    -->
+    <Style Selector="FlyoutPresenter.poppanel">
+      <Setter Property="Background" Value="{StaticResource Raised}" />
+      <Setter Property="BorderBrush" Value="{StaticResource BorderMid}" />
+      <Setter Property="BorderThickness" Value="1" />
+      <Setter Property="CornerRadius" Value="12" />
+      <Setter Property="Padding" Value="8" />
+    </Style>
+
    <!--
      A row inside the user popover: a vault switch, "New vault", Settings, Preferences, Vaults, Logout. All
      six share one shape — flat, a track fill under the pointer, 8 pixels of rounding — because the popover
      draws them as one list and a row that looked different from its neighbours would read as a separator
      that is not one.
+
+      ◆ FLAT MEANS SAYING SO, which this rule did not. It set a corner radius and a padding and left the
+      Background alone, so every row wore the Fluent theme's own button fill and its border: six raised pills
+      stacked in a menu, where the design draws six lines of text that light up under the pointer. The hover
+      rule below was already right and was simply invisible against a fill that was there all along. Set on
+      the ContentPresenter as well as on the Button, the same as Button.flat does and for the same reason —
+      the theme's template binds its own brush there, and a Background set only on the control loses to it.
    -->
    <Style Selector="Button.poprow">
      <Setter Property="HorizontalAlignment" Value="Stretch" />
      <Setter Property="HorizontalContentAlignment" Value="Stretch" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
      <Setter Property="Padding" Value="11,4" />
      <Setter Property="CornerRadius" Value="8" />
      <Setter Property="MinHeight" Value="20" />
+      <Setter Property="Background" Value="Transparent" />
+      <Setter Property="BorderThickness" Value="0" />
    </Style>
    <Style Selector="Button.poprow /template/ ContentPresenter#PART_ContentPresenter">
+      <Setter Property="Background" Value="Transparent" />
      <Setter Property="BorderThickness" Value="0" />
      <Setter Property="CornerRadius" Value="8" />
    </Style>
    <Style Selector="Button.poprow:pointerover /template/ ContentPresenter#PART_ContentPresenter">
      <Setter Property="Background" Value="{StaticResource Track}" />
    </Style>
+    <Style Selector="Button.poprow:pressed /template/ ContentPresenter#PART_ContentPresenter">
+      <Setter Property="Background" Value="{StaticResource Track}" />
+    </Style>

    <!--
      The check square beside a shown vault in the popover — magenta rather than the accent, because the
@@ -591,10 +623,13 @@
    </Style>

    <!--
-      ── v5b: THE HOST HEADER'S "OPEN SFTP" / "OPEN TERMINAL" GHOST BUTTON ───────────────────────────────
+      ── v5b: THE "OPEN SFTP" / "OPEN TERMINAL" GHOST BUTTON ─────────────────────────────────────────────
      A ghost button distinct from <c>Button.ghost</c> above: this one's resting border is <c>BorderHover</c>
      rather than <c>BorderMid</c> — the mock's own inset ring for this one control — and the design gives it
-      no filled hover, only the border turning to the accent. See <c>SessionHeader.axaml</c>.
+      no filled hover, only the border turning to the accent.
+
+      Named for the host header it was drawn for, which v5c-4 retired; the button itself moved intact to the
+      head of the session sidebar and is stretched across that column there. See <c>SessionSidebar.axaml</c>.
    -->
    <Style Selector="Button.headerghost">
      <Setter Property="Height" Value="32" />
@@ -640,6 +675,30 @@
      <Setter Property="Background" Value="{StaticResource Track}" />
    </Style>

+    <!--
+      ── v5c-4: THE SIDEBAR'S OWN CLOSE AND REOPEN ────────────────────────────────────────────────────────
+      One class for both, because they are one control in two states — a 26-pixel square carrying a chevron,
+      at the head of the column when it is open and at the head of the rail when it is not. Square rather
+      than the 33-tall rows below it: it is chrome belonging to the panel, not an entry in the list the panel
+      is holding, and matching the rows' shape would have offered it as one.
+    -->
+    <Style Selector="Button.sidebargrip">
+      <Setter Property="Width" Value="26" />
+      <Setter Property="Height" Value="26" />
+      <Setter Property="MinWidth" Value="0" />
+      <Setter Property="MinHeight" Value="0" />
+      <Setter Property="HorizontalAlignment" Value="Center" />
+      <Setter Property="HorizontalContentAlignment" Value="Center" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
+      <Setter Property="CornerRadius" Value="8" />
+    </Style>
+    <Style Selector="Button.sidebargrip /template/ ContentPresenter#PART_ContentPresenter">
+      <Setter Property="CornerRadius" Value="8" />
+    </Style>
+    <Style Selector="Button.sidebargrip:pointerover /template/ ContentPresenter#PART_ContentPresenter">
+      <Setter Property="Background" Value="{StaticResource Track}" />
+    </Style>
+
    <!--
      The "+ Pin folder" / "+ Add Snip" row at the foot of each section: 30 tall rather than 33, and its own
      quieter foreground — the mock draws these as the same greyed-out "add" idiom in both sections.
@@ -671,6 +730,7 @@
    -->
    <Style Selector="Button.choice">
      <Setter Property="Padding" Value="10,5" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
      <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
      <Setter Property="FontSize" Value="10.5" />
      <Setter Property="LetterSpacing" Value="0.5" />
@@ -768,6 +828,41 @@
      <Setter Property="BorderThickness" Value="1.5" />
    </Style>

+    <!--
+      ◆ THE FILE PANE'S PATH BOX, which used to be a TextBlock.
+
+      The SFTP pane's header printed where it was and gave no way to say where to go: reaching a directory
+      the breadcrumb could not see meant walking to a common ancestor and back down, one round trip a level,
+      and a path somebody already knew could not be typed at all. It is a real TextBox now, and this style
+      is the whole of what keeps it looking like the label it replaced — no fill and no border until it is
+      pointed at, the same mono weight and colour the TextBlock carried, and the same height, so a header
+      that gained an input did not gain a control that shouts about being one.
+
+      Declared after the base TextBox rules and after .address for the reason this file keeps restating:
+      Avalonia has no specificity, so an exception written before the rules it overrides does nothing.
+    -->
+    <Style Selector="TextBox.pathbox">
+      <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
+      <Setter Property="FontSize" Value="13.5" />
+      <Setter Property="FontWeight" Value="Medium" />
+      <Setter Property="Foreground" Value="{StaticResource TextDim}" />
+      <Setter Property="MinHeight" Value="26" />
+      <Setter Property="Padding" Value="6,2" />
+      <Setter Property="CornerRadius" Value="6" />
+    </Style>
+    <Style Selector="TextBox.pathbox /template/ Border#PART_BorderElement">
+      <Setter Property="Background" Value="Transparent" />
+      <Setter Property="BorderBrush" Value="Transparent" />
+    </Style>
+    <Style Selector="TextBox.pathbox:pointerover /template/ Border#PART_BorderElement">
+      <Setter Property="Background" Value="{StaticResource Field}" />
+      <Setter Property="BorderBrush" Value="{StaticResource BorderMid}" />
+    </Style>
+    <Style Selector="TextBox.pathbox:focus /template/ Border#PART_BorderElement">
+      <Setter Property="Background" Value="{StaticResource Field}" />
+      <Setter Property="BorderBrush" Value="{StaticResource AccentSoft}" />
+    </Style>
+
    <!--
      Lists. The rows in this design are drawn by their own templates and marked as selected with an accent
      strip down the left edge, so the theme's rounded blue selection block has to go — it would sit behind
@@ -853,18 +948,30 @@
      into a grid: equal columns, and a card that grew a third line of tags is taller than its neighbours
      rather than narrower.

-      ◆ 224 IS DERIVED, and the arithmetic is written out because getting it wrong is invisible. The grid's
-      column at the window's minimum is 1016 less the rail's 190 and the drawer's 320, which is 506. The
-      scrolling stack inside it takes 16 of margin on each side, and the vertical scrollbar takes its own —
-      call the usable width 474. A WrapPanel fits floor(474 / (Width + 10)) per row, so two columns needs
-      Width no more than 227.
+      ◆ 214 IS DERIVED, and the arithmetic is written out because getting it wrong is invisible. The grid's
+      column at the window's minimum is 1081 less the rail's 255 and the drawer's 320, which is 506. The
+      scrolling stack inside it takes 26 of margin on each side, and the vertical scrollbar takes its own —
+      call the usable width 454. A WrapPanel fits floor(454 / (Width + 10)) per row, so two columns needs
+      Width no more than 217, and 214 is that with the same few pixels of slack the previous number kept.

-      The first number here was 248, from the same reasoning with the two margins left out. It laid out
-      cleanly and the layout harness passed it, because the harness asks whether a control is inside the
-      window and not how many of them fit on a line — so the grid quietly became one column wide at exactly
-      the size this application guarantees, which is the shape the cards exist to avoid. The second was 232,
-      derived the same way against the drawer's own 304; v5 widened the drawer to 320 for the ADDRESS field's
-      breathing room, which narrowed the budget this number is drawn from and had to move it down in step.
+      Every number here has moved at least once, and always because something beside the cards did:
+
+      · 248, from this reasoning with the two margins left out. It laid out cleanly and the layout harness
+        passed it, because the harness asks whether a control is inside the window and not how many of them
+        fit on a line — so the grid quietly became one column wide at exactly the size this application
+        guarantees, which is the shape the cards exist to avoid.
+      · 232, derived against the drawer's own 304, which v5 widened to 320 for the ADDRESS field's breathing
+        room — narrowing the budget this number is drawn from and moving it down in step.
+      · 224, which is what that gave. The stated arithmetic still said 1016 and 190 by then: v5b's rail took
+        190 to 255 and the window's minimum 1016 to 1081 in the same pass, so the two changes cancelled and
+        the answer stayed right while the working went stale.
+      · 214, now that HostsScreen's board is inset 26 a side rather than 16 — see that file's own remark on
+        why every screen frames its content the same way. Twenty pixels of board is twenty pixels the cards
+        no longer have, and this is where they come from.
+
+      ◆ THE TEST THAT CATCHES THIS IS NOT THE HARNESS. See
+      ScreenLayoutTests.TheHostsGridKeepsTwoColumnsAtTheMinimumWithTheDrawerOpen, which counts columns
+      because that is the thing this number exists to buy and the thing no fit assertion can see.
    -->
    <Style Selector="Border.tile">
      <Setter Property="Background" Value="{StaticResource Raised}" />
@@ -872,7 +979,7 @@
      <Setter Property="BorderThickness" Value="1" />
      <Setter Property="CornerRadius" Value="12" />
      <Setter Property="Padding" Value="12,10" />
-      <Setter Property="Width" Value="224" />
+      <Setter Property="Width" Value="214" />
      <Setter Property="Margin" Value="0,0,10,10" />
    </Style>
    <Style Selector="ListBoxItem:pointerover Border.tile">
@@ -1120,6 +1227,7 @@
    <Style Selector="Button.panechip">
      <Setter Property="Padding" Value="8,4" />
      <Setter Property="MinHeight" Value="0" />
+      <Setter Property="VerticalContentAlignment" Value="Center" />
      <Setter Property="FontFamily" Value="{StaticResource MonoFont}" />
      <Setter Property="FontSize" Value="11" />
      <Setter Property="FontWeight" Value="Medium" />
@@ -1164,6 +1272,16 @@
      <Setter Property="Fill" Value="{StaticResource Live}" />
    </Style>

+    <!--
+      Amber, and it does not contradict the rule above it. Green is what is true and this is not yet true;
+      purple is what you can press and a dot is not pressable. What is left is the caveat colour, which is
+      exactly what a connection still being made is. The same amber the connecting card's track uses, from
+      the same brush, so that the tab and the card the tab opens agree.
+    -->
+    <Style Selector="Ellipse.dot.connecting">
+      <Setter Property="Fill" Value="{StaticResource Warn}" />
+    </Style>
+
    <!--
      The accent strip a selected row carries, drawn by the row template rather than by the item, because the
      item's presenter is the thing the theme keeps repainting.
@@ -1,13 +1,18 @@
-# Regenerates dodossh.ico from the same geometry the Android launcher icon draws.
+# Regenerates dodossh.ico and dodossh.icns from the same geometry the Android launcher icon draws.
 #
 # The phone's mark is a vector — Resources/drawable/ic_launcher_foreground.xml — and the whole
 # reason it is a vector is that there is then one geometry to change and no set of PNG densities
-# to forget one of. Windows will not take a vector: <ApplicationIcon> wants an .ico and nothing
-# else, and Window.Icon wants a bitmap. So the raster exists, and this script is how it stays
-# honest: the numbers below are the ones in that XML, and regenerating is the whole edit.
+# to forget one of. Neither desktop platform will take a vector: <ApplicationIcon> wants an .ico
+# and nothing else, Window.Icon wants a bitmap, and vpk wants an .icns for the macOS bundle. So
+# the rasters exist, and this script is how they stay honest: the numbers below are the ones in
+# that XML, and regenerating is the whole edit.
 #
 #     pwsh -File src/DodoSSH.Client.App/Assets/dodossh-icon.ps1
 #
+# Both outputs are written every run, deliberately. Two scripts, or one script with a switch,
+# is how the two files come to be drawn from different geometry — which nobody would notice,
+# because no one person looks at a Windows taskbar and a macOS Dock on the same afternoon.
+#
 # Coordinates are the launcher's 108-unit viewport, mapped so the middle 72 fills the canvas.
 # That 72 is not an arbitrary crop: it is the part of an adaptive icon a launcher actually shows,
 # the outer 18 on each edge being what it eats for masking and parallax. Rendering the whole 108
@@ -30,29 +35,49 @@ $ink = [System.Drawing.ColorTranslator]::FromHtml('#FFFFFF')     # AccentInk
 # the gap, and its downsampler is not kind to a hairline.
 $sizes = @(16, 20, 24, 32, 40, 48, 64, 128, 256)

-function New-MarkPng([int]$size)
+# $tileFraction is how much of the canvas the accent tile fills, and it is the one number that
+# differs between the two platforms.
+#
+# Windows passes 1.0: the tile bleeds to the edge, because Windows draws application icons at
+# whatever size they come in and every other icon on the taskbar does the same.
+#
+# macOS passes 0.8047, and that is not taste. Apple's icon grid puts a rounded-rect app icon in
+# an 824-pixel square inside a 1024-pixel canvas — 824/1024 — with the remaining hundred pixels a
+# side left as air for the Dock's shadow and its magnification. An icon that ignores the grid and
+# bleeds to the edge does not read as bold; it reads as the one icon in the Dock that is too big,
+# because it sits beside Finder and Safari which do not.
+function New-MarkPng([int]$size, [double]$tileFraction = 1.0)
 {
    $bitmap = New-Object System.Drawing.Bitmap($size, $size, [System.Drawing.Imaging.PixelFormat]::Format32bppArgb)
    $g = [System.Drawing.Graphics]::FromImage($bitmap)
    $g.SmoothingMode = [System.Drawing.Drawing2D.SmoothingMode]::AntiAlias
    $g.PixelOffsetMode = [System.Drawing.Drawing2D.PixelOffsetMode]::HighQuality

+    # The tile, and the inset that centres it when it does not fill the canvas.
+    $tile = [double]$size * $tileFraction
+    $inset = ([double]$size - $tile) / 2.0
+
    # The accent tile, rounded as a launcher mask rounds it. A square-cornered tile would be the
    # one icon on the taskbar with corners, which reads as unfinished rather than as deliberate.
-    $radius = [double]$size * 0.22
+    #
+    # 0.22 of the tile rather than of the canvas, so the corner keeps its proportion to the shape
+    # it is rounding instead of growing as the air around it does. It is also within a whisker of
+    # the 185/824 Apple's own grid specifies, which is why one radius serves both files.
+    $radius = $tile * 0.22
    $d = $radius * 2.0
    $path = New-Object System.Drawing.Drawing2D.GraphicsPath
-    $path.AddArc(0.0, 0.0, $d, $d, 180, 90)
-    $path.AddArc($size - $d, 0.0, $d, $d, 270, 90)
-    $path.AddArc($size - $d, $size - $d, $d, $d, 0, 90)
-    $path.AddArc(0.0, $size - $d, $d, $d, 90, 90)
+    $path.AddArc($inset, $inset, $d, $d, 180, 90)
+    $path.AddArc($inset + $tile - $d, $inset, $d, $d, 270, 90)
+    $path.AddArc($inset + $tile - $d, $inset + $tile - $d, $d, $d, 0, 90)
+    $path.AddArc($inset, $inset + $tile - $d, $d, $d, 90, 90)
    $path.CloseFigure()
    $brush = New-Object System.Drawing.SolidBrush($accent)
    $g.FillPath($brush, $path)

-    # 108-viewport units to pixels, with the outer 18 dropped on each edge.
-    $scale = [double]$size / 72.0
-    function P([double]$x, [double]$y) { New-Object System.Drawing.PointF((($x - 18.0) * $scale), (($y - 18.0) * $scale)) }
+    # 108-viewport units to pixels, with the outer 18 dropped on each edge. Scaled to the tile and
+    # offset by the inset, so the glyph keeps its place within the tile at either fraction.
+    $scale = $tile / 72.0
+    function P([double]$x, [double]$y) { New-Object System.Drawing.PointF((($x - 18.0) * $scale + $inset), (($y - 18.0) * $scale + $inset)) }

    # A stroke thinner than a pixel renders as a grey suggestion of itself, which at 16px is the
    # difference between a mark and a smudge. The phone's file already bumps this width for the
@@ -117,3 +142,86 @@ $target = Join-Path $PSScriptRoot 'dodossh.ico'
 $w.Dispose(); $out.Dispose()

 Write-Output "Wrote $target ($($sizes.Count) sizes, $((Get-Item $target).Length) bytes)"
+
+# ---- dodossh.icns, for the macOS bundle ----------------------------------------------------------
+#
+# Written here rather than by `iconutil` on a Mac, and that is the point of doing it the long way.
+# iconutil is the documented tool and it exists only on macOS, so an icon that needed it could not
+# be regenerated on the machine this project is developed on — the geometry above would change and
+# the .icns would quietly keep the old mark until somebody next opened a Mac. The container format
+# is a magic word, a length and a run of typed PNG chunks, which is little enough to own.
+#
+# ◆ EVERY LENGTH IN THIS FILE IS BIG-ENDIAN, AND BinaryWriter IS NOT.
+#
+# The one thing that will catch anybody editing this. A .icns written little-endian is not rejected
+# with an error — Finder and vpk both just show the placeholder icon, because the first chunk claims
+# a length of about two billion and the parser walks off the end and gives up. Hence Write-BE32.
+#
+# Type codes are Apple's, and the pairs are not redundant. ic08 and ic13 are both 256 pixels because
+# one is "256 at 1x" and the other is "128 at 2x", and a Retina display asked for the second will not
+# accept the first. Same for ic09/ic14 at 512. iconutil emits both from an .iconset for this reason,
+# so this does too.
+$icnsTypes = @(
+    @{ Type = 'ic11'; Size = 32 }    # 16@2x
+    @{ Type = 'ic12'; Size = 64 }    # 32@2x
+    @{ Type = 'ic07'; Size = 128 }   # 128@1x
+    @{ Type = 'ic13'; Size = 256 }   # 128@2x
+    @{ Type = 'ic08'; Size = 256 }   # 256@1x
+    @{ Type = 'ic14'; Size = 512 }   # 256@2x
+    @{ Type = 'ic09'; Size = 512 }   # 512@1x
+    @{ Type = 'ic10'; Size = 1024 }  # 512@2x
+)
+
+# Apple's icon grid: an 824-pixel shape centred in a 1024-pixel canvas. See New-MarkPng.
+$macTileFraction = 824.0 / 1024.0
+
+# Rendered once per distinct pixel size rather than once per type code, so the two 256s and the two
+# 512s are byte-identical and the file does not carry the same image twice over at different
+# compression. It also halves the drawing, which at 1024 is not nothing.
+$rendered = @{}
+foreach ($size in ($icnsTypes.Size | Sort-Object -Unique))
+{
+    [byte[]]$png = New-MarkPng $size $macTileFraction
+    $rendered[$size] = $png
+}
+
+$icns = New-Object System.IO.MemoryStream
+
+function Write-BE32([System.IO.Stream]$stream, [uint32]$value)
+{
+    $bytes = [System.BitConverter]::GetBytes($value)
+    if ([System.BitConverter]::IsLittleEndian) { [array]::Reverse($bytes) }
+    $stream.Write($bytes, 0, 4)
+}
+
+function Write-Ascii([System.IO.Stream]$stream, [string]$text)
+{
+    $bytes = [System.Text.Encoding]::ASCII.GetBytes($text)
+    $stream.Write($bytes, 0, $bytes.Length)
+}
+
+# The header's length field covers the whole file including the header, so it is written last —
+# eight bytes of nothing now, seeked back to and filled in once the total is known.
+Write-Ascii $icns 'icns'
+Write-BE32 $icns 0
+
+foreach ($entry in $icnsTypes)
+{
+    $payload = $rendered[$entry.Size]
+    Write-Ascii $icns $entry.Type
+
+    # Length includes this chunk's own eight-byte header, which is the off-by-eight everybody
+    # writes once.
+    Write-BE32 $icns ([uint32]($payload.Length + 8))
+    $icns.Write($payload, 0, $payload.Length)
+}
+
+$total = [uint32]$icns.Length
+$icns.Position = 4
+Write-BE32 $icns $total
+
+$icnsTarget = Join-Path $PSScriptRoot 'dodossh.icns'
+[System.IO.File]::WriteAllBytes($icnsTarget, $icns.ToArray())
+$icns.Dispose()
+
+Write-Output "Wrote $icnsTarget ($($icnsTypes.Count) entries, $((Get-Item $icnsTarget).Length) bytes)"
@@ -66,6 +66,21 @@
    -->
    <DodoChannel Condition="'$(DodoChannel)' == ''">release</DodoChannel>

+    <!--
+      For the macOS keychain interop in Platform/, and for nothing else.
+
+      Set on this project rather than in Directory.Build.props deliberately. The frameworks that hold a
+      Secure Enclave key take CFDictionaries of raw pointers, so building one means pinning arrays and
+      taking their addresses — see MacDeviceKeyStore. Every other project here is managed code with no
+      business doing that, and a solution-wide flag would quietly permit it everywhere, including in the
+      crypto project where a stray pointer is the last thing anybody wants to have been allowed.
+
+      The alternative — GCHandle.Alloc with GCHandleType.Pinned — needs no flag and was considered. It
+      would replace each `fixed` with an allocate/free pair that has to be balanced by hand across the
+      early returns those methods are full of, which trades a compiler-checked scope for a manual one.
+    -->
+    <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
+
    <!--
      False here, unlike every server project. The root Directory.Build.props sets it true because
      the API is container-hosted, UTC-only and has no business formatting anything for a human.
@@ -0,0 +1,598 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+using System.Text;
+using DodoSSH.Client.Session;
+using static DodoSSH.Client.App.Platform.MacSecurity;
+
+namespace DodoSSH.Client.App.Platform;
+
+/// <summary>
+/// Keeps the device key encrypted to a Secure Enclave key whose use requires the user's presence.
+/// </summary>
+/// <remarks>
+/// <para>
+/// The macOS counterpart of <see cref="WindowsDeviceKeyStore"/>, and the same argument holds it up:
+/// <b>the consent is enforced by the platform, not by this class</b>. The unwrapping key is generated
+/// inside the Secure Enclave and never leaves it — there is no code path, privileged or otherwise, that
+/// turns it into bytes — and it is created under an access control requiring
+/// <see cref="AccessControlFlags.UserPresence"/>, so Touch ID or the login password is a condition of
+/// <em>using</em> it. Malware running as the user can ask for a decryption; it cannot answer the prompt,
+/// and the attempt is visible.
+/// </para>
+/// <para>
+/// A store that showed its own prompt and then read a protected file would be trivially bypassed, which
+/// is the mistake ADR 0007 originally described and the Windows store's comment corrects. The correction
+/// applies here unchanged.
+/// </para>
+/// <para>
+/// <b>P-256 and ECIES, where Windows uses RSA-OAEP, and the difference is not a preference.</b> The
+/// Secure Enclave holds exactly one kind of key: a 256-bit key on the NIST P-256 curve. It will not hold
+/// an RSA key at any size. So the wrap is <c>eciesEncryptionCofactorX963SHA256AESGCM</c> — an ephemeral
+/// agreement against the enclave's public half, X9.63-KDF to an AES-GCM key, and the ephemeral public
+/// key carried in the output. The framework does all of that; what matters here is that the input is 32
+/// bytes and there is no size limit worth worrying about.
+/// </para>
+/// <para>
+/// <b>Sealing is silent and unsealing prompts, which is better than the Windows shape rather than merely
+/// different.</b> On Windows, <c>CngKey.Create</c> with <c>ProtectKey</c> raises a dialog at creation as
+/// well, because the policy means "protect this key with a PIN" and Windows sets that up there and then.
+/// Here <see cref="SecKeyCopyPublicKey"/> works on an enclave key without any prompt, so registering a
+/// device shows nothing and only unlock asks. <see cref="SaveAsync"/> is therefore not user-facing on
+/// this platform — but it is still called from where the Windows one has to be, and relying on that
+/// difference would make the shared caller platform-specific for no gain.
+/// </para>
+/// <para>
+/// <b>What this cannot be tested against, and what follows from that.</b> Every method except
+/// <see cref="IsAvailableAsync"/> and the empty case of <see cref="TryLoadAsync"/> needs an interactive
+/// login session and real enclave hardware, so none can be exercised by an automated test — the same
+/// line the Windows store draws. It also means <see cref="IsSupported"/> must probe rather than infer:
+/// see its remarks for the three ordinary machines that have no usable enclave and must degrade to the
+/// passphrase rather than fail at unlock.
+/// </para>
+/// </remarks>
+[SupportedOSPlatform("macos")]
+public sealed partial class MacDeviceKeyStore : IDeviceKeyStore
+{
+    /// <summary>
+    /// The keychain tag this application's enclave key is filed under.
+    /// </summary>
+    /// <remarks>
+    /// Versioned for the reason the Windows key name is: a future change of curve or wrap algorithm can
+    /// create a new key beside the old one rather than failing to open blobs written by a previous
+    /// build. A device that cannot be opened falls back to the passphrase, which is survivable — but
+    /// silently, and a user would only notice their fingerprint had stopped working.
+    ///
+    /// Prefixed with the bundle identifier because the keychain is shared across every application the
+    /// user runs, unlike a CNG key name, which is scoped to the user's key store already.
+    /// </remarks>
+    private const string KeyTag = "dev.dodotech.dodossh.devicekey.v1";
+
+    /// <summary>
+    /// Shown in the Touch ID prompt, so it has to read as a sentence to a person.
+    /// </summary>
+    /// <remarks>
+    /// macOS composes it into "DodoSSH is trying to ...", so this is a verb phrase and not a sentence of
+    /// its own. The same words the Windows consent dialog uses.
+    /// </remarks>
+    private const string ConsentPrompt = "unlock your DodoSSH vault";
+
+    private readonly ClientPaths paths;
+
+    /// <summary>Creates the store.</summary>
+    public MacDeviceKeyStore(ClientPaths paths)
+    {
+        ArgumentNullException.ThrowIfNull(paths);
+        this.paths = paths;
+    }
+
+    /// <summary>
+    /// Whether this Mac has a Secure Enclave that will hold a key for this build.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// Probed by creating a throwaway key and deleting it, rather than by asking whether the hardware
+    /// exists. Three ordinary situations answer "no" here and would otherwise only be discovered at the
+    /// moment somebody tried to unlock:
+    /// </para>
+    /// <para>
+    /// <b>An Intel Mac with no T2.</b> Apple Silicon and T2 machines have an enclave; earlier Intel
+    /// models do not, and there is no single attribute that says so.
+    /// </para>
+    /// <para>
+    /// <b>A build that is not code signed.</b> Enclave key creation requires a signing identity, so
+    /// every <c>dotnet run</c> and every build from an IDE fails here with a missing-entitlement error.
+    /// That is the correct answer rather than a nuisance: a development build should keep asking for the
+    /// passphrase, and this is what makes it do so without a platform check somewhere else.
+    /// </para>
+    /// <para>
+    /// <b>A machine with no login password set.</b> <see cref="AccessControlFlags.UserPresence"/> has
+    /// nothing to demand, and the framework refuses the access control object rather than silently
+    /// creating a key anybody could use.
+    /// </para>
+    /// <para>
+    /// The probe uses its own tag and no UI policy, so nothing prompts and nothing collides with the
+    /// real key. It is deleted immediately; a probe key left behind would accumulate one per launch.
+    /// </para>
+    /// </remarks>
+    internal static bool IsSupported()
+    {
+        try
+        {
+            var probe = $"{KeyTag}.probe.{Guid.CreateVersion7():N}";
+
+            using var scope = new CoreFoundationScope();
+
+            var symbols = MacSymbols.Resolve();
+
+            if (!symbols.Complete)
+            {
+                return false;
+            }
+
+            var key = CreateEnclaveKey(scope, symbols, probe);
+
+            if (key == IntPtr.Zero)
+            {
+                return false;
+            }
+
+            // Discarded deliberately. The question this method answers is whether the enclave will make a
+            // key, and it demonstrably just did; a failure to clean the probe up afterwards leaves one
+            // stray keychain item and does not make the answer no.
+            _ = DeleteKey(symbols, probe);
+
+            return true;
+        }
+        catch (Exception exception) when (exception is DllNotFoundException
+                                              or EntryPointNotFoundException
+                                              or BadImageFormatException)
+        {
+            // A macOS without these frameworks is not a thing that exists, so this is really the guard
+            // for the case that does: a future release renaming or removing one of them. The answer is
+            // the same as for hardware that is absent — no device key, ask for the passphrase.
+            return false;
+        }
+    }
+
+    /// <inheritdoc />
+    public ValueTask<bool> IsAvailableAsync(CancellationToken cancellationToken) =>
+        ValueTask.FromResult(IsSupported());
+
+    /// <inheritdoc />
+    public async ValueTask SaveAsync(
+        ReadOnlyMemory<byte> devicePrivateKey,
+        CancellationToken cancellationToken)
+    {
+        var sealedKey = Seal(devicePrivateKey.Span)
+            ?? throw new InvalidOperationException(
+                "The Secure Enclave would not seal the device key. Check IsAvailableAsync before offering to register one.");
+
+        paths.EnsureCreated();
+
+        await File.WriteAllBytesAsync(paths.DeviceKeyFile, sealedKey, cancellationToken)
+            .ConfigureAwait(false);
+    }
+
+    /// <inheritdoc />
+    public async ValueTask<byte[]?> TryLoadAsync(CancellationToken cancellationToken)
+    {
+        if (!File.Exists(paths.DeviceKeyFile))
+        {
+            return null;
+        }
+
+        var sealedKey = await File.ReadAllBytesAsync(paths.DeviceKeyFile, cancellationToken)
+            .ConfigureAwait(false);
+
+        return Unseal(sealedKey);
+    }
+
+    /// <inheritdoc />
+    public ValueTask ForgetAsync(CancellationToken cancellationToken)
+    {
+        if (File.Exists(paths.DeviceKeyFile))
+        {
+            File.Delete(paths.DeviceKeyFile);
+        }
+
+        var symbols = MacSymbols.Resolve();
+
+        if (symbols.Complete)
+        {
+            // Discarded, and that is deliberate: there is nothing a caller could do about a failure here,
+            // and the file deleted above is the half that decides whether unlock will try at all. A key
+            // left in the enclave with no ciphertext to open is inert.
+            _ = DeleteKey(symbols, KeyTag);
+        }
+
+        return ValueTask.CompletedTask;
+    }
+
+    /// <remarks>
+    /// Silent: it uses only the public half. Null on every failure, and the caller's answer to all of
+    /// them is the same — do not offer a device unlock.
+    /// </remarks>
+    private static byte[]? Seal(ReadOnlySpan<byte> devicePrivateKey)
+    {
+        try
+        {
+            using var scope = new CoreFoundationScope();
+
+            var symbols = MacSymbols.Resolve();
+
+            if (!symbols.Complete)
+            {
+                return null;
+            }
+
+            // Created on first use rather than at registration, so that a device key re-registered after
+            // a ForgetAsync gets a key again without anything having to notice that it had gone.
+            var privateKey = FindKey(scope, symbols, KeyTag, prompt: null);
+
+            if (privateKey == IntPtr.Zero)
+            {
+                privateKey = CreateEnclaveKey(scope, symbols, KeyTag);
+            }
+
+            if (privateKey == IntPtr.Zero)
+            {
+                return null;
+            }
+
+            var publicKey = scope.Keep(SecKeyCopyPublicKey(privateKey));
+
+            if (publicKey == IntPtr.Zero)
+            {
+                return null;
+            }
+
+            var plaintext = Data(scope, devicePrivateKey);
+
+            if (plaintext == IntPtr.Zero)
+            {
+                return null;
+            }
+
+            var ciphertext = scope.Keep(
+                SecKeyCreateEncryptedData(publicKey, symbols.EciesAlgorithm, plaintext, out var error));
+
+            scope.Keep(error);
+
+            return ciphertext == IntPtr.Zero ? null : ToArray(ciphertext);
+        }
+        catch (Exception exception) when (exception is DllNotFoundException
+                                              or EntryPointNotFoundException
+                                              or BadImageFormatException)
+        {
+            return null;
+        }
+    }
+
+    /// <remarks>
+    /// <para>
+    /// This is the call that prompts. Every failure becomes null, and the set is wider than it looks:
+    /// the key may be gone, the user may have cancelled or let the prompt time out, the enclave may have
+    /// invalidated it after the login password was reset, or the blob may predate a key that has since
+    /// been replaced. None of them are distinguishable to a user and all have the same remedy, so none
+    /// are worth telling apart here — see <c>UnlockStatus.DeviceKeyUnavailable</c>.
+    /// </para>
+    /// <para>
+    /// Blocking, and it blocks on a person. The prompt is modal to the application, so this must not run
+    /// on a thread that is also expected to draw the window behind it.
+    /// </para>
+    /// </remarks>
+    private static byte[]? Unseal(byte[] sealedKey)
+    {
+        try
+        {
+            using var scope = new CoreFoundationScope();
+
+            var symbols = MacSymbols.Resolve();
+
+            if (!symbols.Complete)
+            {
+                return null;
+            }
+
+            var privateKey = FindKey(scope, symbols, KeyTag, ConsentPrompt);
+
+            if (privateKey == IntPtr.Zero)
+            {
+                return null;
+            }
+
+            var ciphertext = Data(scope, sealedKey);
+
+            if (ciphertext == IntPtr.Zero)
+            {
+                return null;
+            }
+
+            var plaintext = scope.Keep(
+                SecKeyCreateDecryptedData(privateKey, symbols.EciesAlgorithm, ciphertext, out var error));
+
+            scope.Keep(error);
+
+            return plaintext == IntPtr.Zero ? null : ToArray(plaintext);
+        }
+        catch (Exception exception) when (exception is DllNotFoundException
+                                              or EntryPointNotFoundException
+                                              or BadImageFormatException)
+        {
+            return null;
+        }
+    }
+
+    /// <summary>
+    /// Generates a key inside the Secure Enclave, filed under <paramref name="tag"/>. Owned by the scope.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The attribute dictionary is the whole security decision, so it is worth reading rather than
+    /// pattern-matching. <c>TokenID = SecureEnclave</c> is what puts the private half in hardware;
+    /// without it this silently generates an ordinary software key that behaves identically in every
+    /// visible way and protects nothing.
+    /// </para>
+    /// <para>
+    /// <c>AccessibleWhenUnlockedThisDeviceOnly</c> rather than any of the migratable classes, because a
+    /// device key that could be restored onto another machine from a backup would no longer mean "this
+    /// machine". The enclave already makes that impossible; saying it as well means the intent survives
+    /// a future change of storage.
+    /// </para>
+    /// <para>
+    /// <c>UseDataProtectionKeychain</c> is the macOS-specific one and the easiest to omit. Without it,
+    /// macOS routes this to the older file-based keychain, which does not understand access control
+    /// objects or the enclave, and the call fails with a parameter error that says nothing about the
+    /// missing key.
+    /// </para>
+    /// </remarks>
+    private static IntPtr CreateEnclaveKey(CoreFoundationScope scope, MacSymbols symbols, string tag)
+    {
+        var access = scope.Keep(SecAccessControlCreateWithFlags(
+            IntPtr.Zero,
+            symbols.AccessibleWhenUnlockedThisDeviceOnly,
+            AccessControlFlags.PrivateKeyUsage | AccessControlFlags.UserPresence,
+            out var accessError));
+
+        scope.Keep(accessError);
+
+        if (access == IntPtr.Zero)
+        {
+            return IntPtr.Zero;
+        }
+
+        var privateAttrs = Dictionary(
+            scope,
+            [symbols.AttrIsPermanent, symbols.AttrApplicationTag, symbols.AttrAccessControl],
+            [symbols.True, TagData(scope, tag), access]);
+
+        if (privateAttrs == IntPtr.Zero)
+        {
+            return IntPtr.Zero;
+        }
+
+        var keySize = Number(scope, 256);
+
+        var parameters = Dictionary(
+            scope,
+            [
+                symbols.AttrKeyType,
+                symbols.AttrKeySizeInBits,
+                symbols.AttrTokenId,
+                symbols.UseDataProtectionKeychain,
+                symbols.PrivateKeyAttrs,
+            ],
+            [
+                symbols.KeyTypeEcSecPrimeRandom,
+                keySize,
+                symbols.TokenIdSecureEnclave,
+                symbols.True,
+                privateAttrs,
+            ]);
+
+        if (parameters == IntPtr.Zero)
+        {
+            return IntPtr.Zero;
+        }
+
+        var key = scope.Keep(SecKeyCreateRandomKey(parameters, out var error));
+
+        scope.Keep(error);
+
+        return key;
+    }
+
+    /// <summary>
+    /// Looks the enclave key up by tag. Owned by the scope; zero when there is none.
+    /// </summary>
+    /// <remarks>
+    /// <paramref name="prompt"/> is attached here and consumed later: the lookup itself does not raise
+    /// anything, because a handle to an enclave key is not a use of it. The words reach the user at the
+    /// decrypt, which is the operation the access control actually guards.
+    ///
+    /// <c>UseOperationPrompt</c> is deprecated in favour of an <c>LAContext</c>, and is used anyway. An
+    /// LAContext would mean binding LocalAuthentication as well for one string, and the deprecated key
+    /// still works; the day it stops, this call fails and the store degrades to the passphrase, which is
+    /// the failure this whole class is built to degrade into.
+    /// </remarks>
+    private static IntPtr FindKey(CoreFoundationScope scope, MacSymbols symbols, string tag, string? prompt)
+    {
+        List<IntPtr> keys =
+        [
+            symbols.Class,
+            symbols.AttrApplicationTag,
+            symbols.AttrKeyType,
+            symbols.UseDataProtectionKeychain,
+            symbols.ReturnRef,
+        ];
+
+        List<IntPtr> values =
+        [
+            symbols.ClassKey,
+            TagData(scope, tag),
+            symbols.KeyTypeEcSecPrimeRandom,
+            symbols.True,
+            symbols.True,
+        ];
+
+        if (prompt is not null)
+        {
+            keys.Add(symbols.UseOperationPrompt);
+            values.Add(scope.Keep(CFString(prompt)));
+        }
+
+        var query = Dictionary(scope, [.. keys], [.. values]);
+
+        if (query == IntPtr.Zero)
+        {
+            return IntPtr.Zero;
+        }
+
+        var status = SecItemCopyMatching(query, out var result);
+
+        // errSecItemNotFound is the ordinary answer on a machine that has never registered a device, and
+        // it is not distinguished from any other failure for the reason the class remarks give.
+        return status == Success ? scope.Keep(result) : IntPtr.Zero;
+    }
+
+    /// <summary>Removes the key with this tag from the keychain.</summary>
+    /// <returns>Whether the keychain now has no key under this tag.</returns>
+    /// <remarks>
+    /// <c>ItemNotFound</c> counts as success, and that is the common case rather than an edge: it is
+    /// what a machine that never registered a device answers, and what the second of two
+    /// <see cref="ForgetAsync"/> calls answers. Treating it as a failure would make forgetting a device
+    /// twice report a problem that does not exist.
+    /// </remarks>
+    private static bool DeleteKey(MacSymbols symbols, string tag)
+    {
+        using var scope = new CoreFoundationScope();
+
+        var query = Dictionary(
+            scope,
+            [symbols.Class, symbols.AttrApplicationTag, symbols.UseDataProtectionKeychain],
+            [symbols.ClassKey, TagData(scope, tag), symbols.True]);
+
+        if (query == IntPtr.Zero)
+        {
+            return false;
+        }
+
+        var status = SecItemDelete(query);
+
+        return status is Success or ItemNotFound;
+    }
+
+    // ---- Small CoreFoundation conveniences ---------------------------------------------------------
+
+    /// <remarks>
+    /// The arrays are pinned for the duration of the call and not beyond it, which is correct because
+    /// <c>CFDictionaryCreate</c> copies them: the dictionary retains each key and value, and never reads
+    /// the arrays again.
+    /// </remarks>
+    private static IntPtr Dictionary(CoreFoundationScope scope, IntPtr[] keys, IntPtr[] values)
+    {
+        // A zero anywhere means one of the constants did not resolve or an earlier allocation failed.
+        // Passing it on produces a dictionary with a null key, which CFDictionaryCreate does not reject
+        // — it crashes inside the callback table instead.
+        if (Array.IndexOf(keys, IntPtr.Zero) >= 0 || Array.IndexOf(values, IntPtr.Zero) >= 0)
+        {
+            return IntPtr.Zero;
+        }
+
+        var symbols = MacSymbols.Resolve();
+
+        unsafe
+        {
+            fixed (IntPtr* keyPtr = keys)
+            fixed (IntPtr* valuePtr = values)
+            {
+                return scope.Keep(CFDictionaryCreate(
+                    IntPtr.Zero,
+                    (IntPtr)keyPtr,
+                    (IntPtr)valuePtr,
+                    keys.Length,
+                    symbols.TypeDictionaryKeyCallBacks,
+                    symbols.TypeDictionaryValueCallBacks));
+            }
+        }
+    }
+
+    /// <summary>Copies bytes into a CFData. Owned by the scope.</summary>
+    /// <remarks>
+    /// The pin lasts only as long as the call, which is correct: <c>CFDataCreate</c> copies, so the
+    /// CFData does not reference this memory afterwards. <c>CFDataCreateWithBytesNoCopy</c> would not,
+    /// and is not used for exactly that reason — it would hand the framework a pointer into the managed
+    /// heap and rely on the object staying where the collector first put it.
+    /// </remarks>
+    private static IntPtr Data(CoreFoundationScope scope, ReadOnlySpan<byte> bytes)
+    {
+        unsafe
+        {
+            fixed (byte* pointer = bytes)
+            {
+                return scope.Keep(CFDataCreate(IntPtr.Zero, (IntPtr)pointer, bytes.Length));
+            }
+        }
+    }
+
+    /// <remarks>
+    /// UTF-8 rather than any other encoding, and it only has to be consistent with itself: the tag is an
+    /// opaque blob the keychain matches byte for byte, so what matters is that a lookup encodes it the
+    /// same way the creation did. It is written once, here, for exactly that reason.
+    /// </remarks>
+    private static IntPtr TagData(CoreFoundationScope scope, string tag) =>
+        Data(scope, Encoding.UTF8.GetBytes(tag));
+
+    private static IntPtr Number(CoreFoundationScope scope, int value)
+    {
+        unsafe
+        {
+            return scope.Keep(CFNumberCreate(IntPtr.Zero, (nint)CFNumberIntType, (IntPtr)(&value)));
+        }
+    }
+
+    /// <summary>Builds a CFString from a managed string. Owned, so the caller tracks it.</summary>
+    /// <remarks>
+    /// Built explicitly rather than left to the marshaller, because these calls take a
+    /// <c>CFStringRef</c> and not a C string — the runtime's default marshalling would hand over a
+    /// <c>char*</c>, which CoreFoundation reads as an object pointer and follows into nothing.
+    /// </remarks>
+    private static IntPtr CFString(string value)
+    {
+        var bytes = Encoding.UTF8.GetBytes(value);
+
+        unsafe
+        {
+            fixed (byte* pointer = bytes)
+            {
+                // kCFStringEncodingUTF8 is 0x08000100, spelled out rather than named because it is the
+                // only encoding constant this file uses.
+                return CFStringCreateWithBytes(IntPtr.Zero, (IntPtr)pointer, bytes.Length, 0x08000100, false);
+            }
+        }
+    }
+
+    [LibraryImport(CoreFoundation)]
+    private static partial IntPtr CFStringCreateWithBytes(
+        IntPtr allocator,
+        IntPtr bytes,
+        nint numBytes,
+        uint encoding,
+        [MarshalAs(UnmanagedType.U1)] bool isExternalRepresentation);
+
+    private static byte[] ToArray(IntPtr data)
+    {
+        var length = (int)CFDataGetLength(data);
+        var pointer = CFDataGetBytePtr(data);
+
+        if (length <= 0 || pointer == IntPtr.Zero)
+        {
+            return [];
+        }
+
+        var result = new byte[length];
+        Marshal.Copy(pointer, result, 0, length);
+
+        return result;
+    }
+}
@@ -0,0 +1,254 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+
+namespace DodoSSH.Client.App.Platform;
+
+/// <summary>
+/// The pieces of CoreFoundation and Security.framework <see cref="MacDeviceKeyStore"/> needs.
+/// </summary>
+/// <remarks>
+/// <para>
+/// Separated from the store itself because it is a different kind of code with a different kind of
+/// review: nothing here makes a decision, and everything here is a translation of a C declaration that
+/// is either right or wrong. Mixing the two would mean the security argument in
+/// <see cref="MacDeviceKeyStore"/> had to be read past two hundred lines of marshalling to find.
+/// </para>
+/// <para>
+/// <b>Every Create or Copy returns an object this process owns.</b> That is CoreFoundation's Create
+/// Rule, and it is the thing here that goes wrong silently: the enclave key handle is small, so a leak
+/// shows up as nothing at all until a long-running process has done a few thousand unlocks.
+/// <see cref="CoreFoundationScope"/> exists so ownership is tracked by construction rather than by
+/// remembering, and every function below that returns a handle says whether it is owned.
+/// </para>
+/// <para>
+/// <b>The integer widths are the part worth checking against the headers rather than skimming.</b>
+/// <c>CFIndex</c>, <c>CFOptionFlags</c> and <c>CFNumberType</c> are all pointer-width on a 64-bit Mac,
+/// not 32-bit, and getting one wrong does not fail cleanly — it shifts every argument after it, so the
+/// call receives plausible rubbish and returns a parameter error that names nothing.
+/// </para>
+/// </remarks>
+[SupportedOSPlatform("macos")]
+internal static partial class MacSecurity
+{
+    internal const string SecurityFramework =
+        "/System/Library/Frameworks/Security.framework/Security";
+
+    internal const string CoreFoundation =
+        "/System/Library/Frameworks/CoreFoundation.framework/CoreFoundation";
+
+    /// <summary>
+    /// The access control flags <c>SecAccessControlCreateWithFlags</c> takes.
+    /// </summary>
+    /// <remarks>
+    /// <c>ulong</c> because the parameter is a <c>CFOptionFlags</c>, which is an <c>unsigned long</c>.
+    /// Only the two flags that are used are listed; the full set is large, and copying it in would
+    /// invite somebody to reach for one without reading what it does to the prompt — <c>Biometry</c>
+    /// alone, for instance, leaves a Mac with no Touch ID unable to unlock at all rather than falling
+    /// back to the login password.
+    /// </remarks>
+    [Flags]
+    internal enum AccessControlFlags : ulong
+    {
+        /// <summary>
+        /// Touch ID if the machine has it, the login password if not.
+        /// </summary>
+        /// <remarks>
+        /// The forgiving one, deliberately. <c>BiometryCurrentSet</c> would additionally invalidate the
+        /// key whenever a fingerprint is added or removed, which sounds stricter and here buys nothing:
+        /// this key wraps a device key whose loss already means "ask for the passphrase", so the only
+        /// effect would be users being sent back to their passphrase by an unrelated Settings change
+        /// they would never connect to it.
+        /// </remarks>
+        UserPresence = 1ul << 0,
+
+        /// <summary>Required for any key that lives in the Secure Enclave.</summary>
+        PrivateKeyUsage = 1ul << 30,
+    }
+
+    /// <summary>The CFNumberType code for a 32-bit int, from CFNumber.h.</summary>
+    internal const long CFNumberIntType = 9;
+
+    /// <summary>errSecSuccess.</summary>
+    internal const int Success = 0;
+
+    /// <summary>errSecItemNotFound, which is an answer rather than a failure.</summary>
+    internal const int ItemNotFound = -25300;
+
+    // ---- CoreFoundation ------------------------------------------------------------------------------
+
+    /// <summary>Releases an owned handle.</summary>
+    [LibraryImport(CoreFoundation)]
+    internal static partial void CFRelease(IntPtr handle);
+
+    /// <summary>Copies bytes into a new CFData. Owned.</summary>
+    [LibraryImport(CoreFoundation)]
+    internal static partial IntPtr CFDataCreate(IntPtr allocator, IntPtr bytes, nint length);
+
+    [LibraryImport(CoreFoundation)]
+    internal static partial IntPtr CFDataGetBytePtr(IntPtr data);
+
+    [LibraryImport(CoreFoundation)]
+    internal static partial nint CFDataGetLength(IntPtr data);
+
+    /// <summary>Boxes a value as a CFNumber. Owned.</summary>
+    [LibraryImport(CoreFoundation)]
+    internal static partial IntPtr CFNumberCreate(IntPtr allocator, nint theType, IntPtr valuePtr);
+
+    /// <summary>Builds an immutable dictionary. Owned.</summary>
+    /// <remarks>
+    /// <para>
+    /// The key and value arrays are passed as raw pointers to memory the caller pins, rather than as
+    /// managed arrays. Source-generated interop wants an explicit element count for a marshalled array,
+    /// and supplying one here would mean stating the length twice — once for the marshaller and once as
+    /// <paramref name="numValues"/> — which is exactly the pair that drifts.
+    /// </para>
+    /// <para>
+    /// The two callback tables are what make the dictionary retain its keys and values, which is why
+    /// they are passed rather than left null: with null callbacks the dictionary stores raw pointers and
+    /// keeps nothing alive, and the resulting use-after-free is intermittent by nature.
+    /// </para>
+    /// </remarks>
+    [LibraryImport(CoreFoundation)]
+    internal static partial IntPtr CFDictionaryCreate(
+        IntPtr allocator,
+        IntPtr keys,
+        IntPtr values,
+        nint numValues,
+        IntPtr keyCallBacks,
+        IntPtr valueCallBacks);
+
+    // ---- Security.framework --------------------------------------------------------------------------
+
+    /// <summary>Builds the access policy a Secure Enclave key is created under. Owned.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial IntPtr SecAccessControlCreateWithFlags(
+        IntPtr allocator,
+        IntPtr protection,
+        AccessControlFlags flags,
+        out IntPtr error);
+
+    /// <summary>Creates a key pair from an attribute dictionary. Owned.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial IntPtr SecKeyCreateRandomKey(IntPtr parameters, out IntPtr error);
+
+    /// <summary>The public half of a key. Owned.</summary>
+    /// <remarks>
+    /// Available even for an enclave key, and that asymmetry is the whole reason this design works: the
+    /// public half is an ordinary key this process can hold and use, while the private half is a handle
+    /// to something inside the enclave that never becomes bytes. So sealing is silent and unsealing is
+    /// the thing the user is asked about.
+    /// </remarks>
+    [LibraryImport(SecurityFramework)]
+    internal static partial IntPtr SecKeyCopyPublicKey(IntPtr key);
+
+    /// <summary>Encrypts with a public key. Owned.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial IntPtr SecKeyCreateEncryptedData(
+        IntPtr key,
+        IntPtr algorithm,
+        IntPtr plaintext,
+        out IntPtr error);
+
+    /// <summary>Decrypts with a private key, prompting for whatever guards it. Owned.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial IntPtr SecKeyCreateDecryptedData(
+        IntPtr key,
+        IntPtr algorithm,
+        IntPtr ciphertext,
+        out IntPtr error);
+
+    /// <summary>Finds a keychain item. The out handle is owned when the result is <see cref="Success"/>.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial int SecItemCopyMatching(IntPtr query, out IntPtr result);
+
+    /// <summary>Deletes every keychain item matching the query.</summary>
+    [LibraryImport(SecurityFramework)]
+    internal static partial int SecItemDelete(IntPtr query);
+
+    // ---- The framework constants ---------------------------------------------------------------------
+
+    /// <summary>
+    /// Reads one of a framework's global CFString constants, or zero if it is not exported.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The keys these dictionaries take are not strings this code may spell for itself. They are
+    /// pointer-comparable constants exported by the framework, and a CFString built here with the same
+    /// characters is a different object — the lookups would miss and the call would fail with a
+    /// parameter error naming nothing.
+    /// </para>
+    /// <para>
+    /// <b>Dereferenced once, because the exported symbol is the variable rather than its value.</b>
+    /// <c>TryGetExport</c> answers the address of the global; the CFStringRef is what that address
+    /// holds. Missing the indirection produces a pointer that is stable, plausible and wrong, which is
+    /// the worst of the three available outcomes.
+    /// </para>
+    /// <para>
+    /// Zero on a missing symbol rather than an exception, because the caller's answer to every failure
+    /// is the same one — report the store unavailable and let unlock ask for the passphrase — and a
+    /// constant that has been renamed by a future macOS should reach that answer rather than a crash.
+    /// </para>
+    /// </remarks>
+    internal static IntPtr Constant(IntPtr library, string symbol) =>
+        NativeLibrary.TryGetExport(library, symbol, out var address)
+            ? Marshal.ReadIntPtr(address)
+            : IntPtr.Zero;
+}
+
+/// <summary>
+/// Releases every CoreFoundation handle put into it, in reverse order, exactly once.
+/// </summary>
+/// <remarks>
+/// <para>
+/// The alternative is a try/finally per handle, and the operations here need six or seven at a time — a
+/// dictionary holding a nested dictionary holding an access control object holding a CFData tag. Finallys
+/// nested that deep stop being read, and a handle released twice is a crash rather than a leak.
+/// </para>
+/// <para>
+/// <see cref="Keep"/> returns what it was given, so a handle can be tracked in the same expression that
+/// produces it and the call sites read as ordinary code.
+/// </para>
+/// </remarks>
+[SupportedOSPlatform("macos")]
+internal sealed class CoreFoundationScope : IDisposable
+{
+    private readonly List<IntPtr> owned = [];
+
+    private bool disposed;
+
+    /// <summary>Takes ownership of a handle and hands it straight back.</summary>
+    /// <remarks>
+    /// Zero is ignored rather than rejected. Every CoreFoundation call here answers zero on failure, so
+    /// accepting it lets a caller track the result in the expression that produces it and check it on
+    /// the next line, instead of writing the check twice.
+    /// </remarks>
+    internal IntPtr Keep(IntPtr handle)
+    {
+        if (handle != IntPtr.Zero)
+        {
+            owned.Add(handle);
+        }
+
+        return handle;
+    }
+
+    public void Dispose()
+    {
+        if (disposed)
+        {
+            return;
+        }
+
+        disposed = true;
+
+        // Reverse order, so a container is released before the things it retains. CoreFoundation does not
+        // require it — retain counts make the order irrelevant — but it keeps the lifetimes readable in a
+        // debugger, where a released container that still lists its contents is a confusing thing to meet.
+        for (var i = owned.Count - 1; i >= 0; i--)
+        {
+            MacSecurity.CFRelease(owned[i]);
+        }
+
+        owned.Clear();
+    }
+}
@@ -0,0 +1,185 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+
+namespace DodoSSH.Client.App.Platform;
+
+/// <summary>
+/// The framework constants <see cref="MacDeviceKeyStore"/> passes to CoreFoundation and Security.
+/// </summary>
+/// <remarks>
+/// <para>
+/// Every field here is a pointer read out of a loaded framework rather than a value this code could
+/// write down. The dictionaries these go into are matched by pointer identity, so a CFString built with
+/// the same characters is a different key and the lookup misses — see <see cref="MacSecurity.Constant"/>
+/// for the indirection that trips people.
+/// </para>
+/// <para>
+/// <b>Resolved once and cached, and the caching is what makes the failure survivable.</b> Two frameworks
+/// and nineteen symbols is a lot of things to be wrong about, and the useful property is that being
+/// wrong about any one of them shows up here — as <see cref="Complete"/> being false — rather than
+/// three calls later as a parameter error. A store that reports itself unavailable sends the user back
+/// to their passphrase; a store that half works corrupts the moment somebody registers a device.
+/// </para>
+/// <para>
+/// <see cref="Lazy{T}"/> rather than a static constructor, because a type initialiser that throws
+/// poisons the type for the life of the process and turns a missing symbol into a
+/// <c>TypeInitializationException</c> at every later call site. The load is done inside a try instead,
+/// and its failure is a value.
+/// </para>
+/// </remarks>
+[SupportedOSPlatform("macos")]
+internal sealed class MacSymbols
+{
+    private static readonly Lazy<MacSymbols> Cached = new(Load, LazyThreadSafetyMode.ExecutionAndPublication);
+
+    private MacSymbols()
+    {
+    }
+
+    /// <summary>Whether every symbol resolved.</summary>
+    /// <remarks>
+    /// Checked by every caller before any of the pointers are used. It is one check rather than
+    /// nineteen, which is the only reason the call sites in <see cref="MacDeviceKeyStore"/> are
+    /// readable.
+    ///
+    /// Computed rather than stored, so that the instance returned when a framework will not load at all
+    /// — every field left at zero — answers false without that having to be set anywhere. One rule,
+    /// applied to the only state there is.
+    /// </remarks>
+    internal bool Complete => AllResolved();
+
+    // CoreFoundation.
+    internal IntPtr True { get; private init; }
+
+    internal IntPtr TypeDictionaryKeyCallBacks { get; private init; }
+
+    internal IntPtr TypeDictionaryValueCallBacks { get; private init; }
+
+    // Security: item classes and query keys.
+    internal IntPtr Class { get; private init; }
+
+    internal IntPtr ClassKey { get; private init; }
+
+    internal IntPtr ReturnRef { get; private init; }
+
+    internal IntPtr UseDataProtectionKeychain { get; private init; }
+
+    internal IntPtr UseOperationPrompt { get; private init; }
+
+    // Security: key attributes.
+    internal IntPtr AttrKeyType { get; private init; }
+
+    internal IntPtr AttrKeySizeInBits { get; private init; }
+
+    internal IntPtr AttrTokenId { get; private init; }
+
+    internal IntPtr AttrIsPermanent { get; private init; }
+
+    internal IntPtr AttrApplicationTag { get; private init; }
+
+    internal IntPtr AttrAccessControl { get; private init; }
+
+    internal IntPtr PrivateKeyAttrs { get; private init; }
+
+    // Security: attribute values.
+    internal IntPtr KeyTypeEcSecPrimeRandom { get; private init; }
+
+    internal IntPtr TokenIdSecureEnclave { get; private init; }
+
+    internal IntPtr AccessibleWhenUnlockedThisDeviceOnly { get; private init; }
+
+    /// <summary>
+    /// <c>kSecKeyAlgorithmECIESEncryptionCofactorX963SHA256AESGCM</c>.
+    /// </summary>
+    /// <remarks>
+    /// The one algorithm the Secure Enclave's P-256 keys support for encryption, and the reason this
+    /// store wraps rather than signs. The long name spells out the whole construction: an ephemeral
+    /// key agreed against the enclave's public half with cofactor ECDH, run through the X9.63 KDF with
+    /// SHA-256, used as an AES-GCM key. The ephemeral public key travels in the output, which is why the
+    /// ciphertext is larger than the 32 bytes going in and why nothing else has to be stored beside it.
+    /// </remarks>
+    internal IntPtr EciesAlgorithm { get; private init; }
+
+    /// <summary>The resolved symbols, loaded once.</summary>
+    internal static MacSymbols Resolve() => Cached.Value;
+
+    private static MacSymbols Load()
+    {
+        try
+        {
+            if (!NativeLibrary.TryLoad(MacSecurity.CoreFoundation, out var cf)
+                || !NativeLibrary.TryLoad(MacSecurity.SecurityFramework, out var sec))
+            {
+                // Every pointer left at zero, which AllResolved reads as incomplete.
+                return new MacSymbols();
+            }
+
+            // The two callback tables are structs rather than object pointers, so what is wanted is the
+            // address of the export itself and not what it holds. Every other symbol here is a CFTypeRef
+            // global and needs the dereference; these two do not, and mixing them up produces a
+            // dictionary that does not retain its contents.
+            var keyCallBacks = NativeLibrary.TryGetExport(cf, "kCFTypeDictionaryKeyCallBacks", out var k)
+                ? k
+                : IntPtr.Zero;
+
+            var valueCallBacks = NativeLibrary.TryGetExport(cf, "kCFTypeDictionaryValueCallBacks", out var v)
+                ? v
+                : IntPtr.Zero;
+
+            return new MacSymbols
+            {
+                True = MacSecurity.Constant(cf, "kCFBooleanTrue"),
+                TypeDictionaryKeyCallBacks = keyCallBacks,
+                TypeDictionaryValueCallBacks = valueCallBacks,
+
+                Class = MacSecurity.Constant(sec, "kSecClass"),
+                ClassKey = MacSecurity.Constant(sec, "kSecClassKey"),
+                ReturnRef = MacSecurity.Constant(sec, "kSecReturnRef"),
+                UseDataProtectionKeychain = MacSecurity.Constant(sec, "kSecUseDataProtectionKeychain"),
+                UseOperationPrompt = MacSecurity.Constant(sec, "kSecUseOperationPrompt"),
+
+                AttrKeyType = MacSecurity.Constant(sec, "kSecAttrKeyType"),
+                AttrKeySizeInBits = MacSecurity.Constant(sec, "kSecAttrKeySizeInBits"),
+                AttrTokenId = MacSecurity.Constant(sec, "kSecAttrTokenID"),
+                AttrIsPermanent = MacSecurity.Constant(sec, "kSecAttrIsPermanent"),
+                AttrApplicationTag = MacSecurity.Constant(sec, "kSecAttrApplicationTag"),
+                AttrAccessControl = MacSecurity.Constant(sec, "kSecAttrAccessControl"),
+                PrivateKeyAttrs = MacSecurity.Constant(sec, "kSecPrivateKeyAttrs"),
+
+                KeyTypeEcSecPrimeRandom = MacSecurity.Constant(sec, "kSecAttrKeyTypeECSECPrimeRandom"),
+                TokenIdSecureEnclave = MacSecurity.Constant(sec, "kSecAttrTokenIDSecureEnclave"),
+                AccessibleWhenUnlockedThisDeviceOnly =
+                    MacSecurity.Constant(sec, "kSecAttrAccessibleWhenUnlockedThisDeviceOnly"),
+
+                EciesAlgorithm = MacSecurity.Constant(
+                    sec,
+                    "kSecKeyAlgorithmECIESEncryptionCofactorX963SHA256AESGCM"),
+            };
+        }
+        catch (Exception exception) when (exception is DllNotFoundException or BadImageFormatException)
+        {
+            return new MacSymbols();
+        }
+    }
+
+    private bool AllResolved() =>
+        True != IntPtr.Zero
+        && TypeDictionaryKeyCallBacks != IntPtr.Zero
+        && TypeDictionaryValueCallBacks != IntPtr.Zero
+        && Class != IntPtr.Zero
+        && ClassKey != IntPtr.Zero
+        && ReturnRef != IntPtr.Zero
+        && UseDataProtectionKeychain != IntPtr.Zero
+        && UseOperationPrompt != IntPtr.Zero
+        && AttrKeyType != IntPtr.Zero
+        && AttrKeySizeInBits != IntPtr.Zero
+        && AttrTokenId != IntPtr.Zero
+        && AttrIsPermanent != IntPtr.Zero
+        && AttrApplicationTag != IntPtr.Zero
+        && AttrAccessControl != IntPtr.Zero
+        && PrivateKeyAttrs != IntPtr.Zero
+        && KeyTypeEcSecPrimeRandom != IntPtr.Zero
+        && TokenIdSecureEnclave != IntPtr.Zero
+        && AccessibleWhenUnlockedThisDeviceOnly != IntPtr.Zero
+        && EciesAlgorithm != IntPtr.Zero;
+}
@@ -31,7 +31,12 @@ internal static class UpdateChannels
    /// </remarks>
    internal static IUpdateChannel ForThisMachine()
    {
-        if (!OperatingSystem.IsWindows())
+        // Two platforms now, and the check is a list rather than a negation for a reason: Linux reaches
+        // this too. Velopack has a Linux path — AppImage — but this repository does not build one, so a
+        // Linux build is a checkout somebody ran, and handing it an UpdateManager would have it poll a
+        // feed carrying nothing it could apply. Naming the platforms that are packaged keeps a future
+        // AppImage an addition here rather than a thing that silently already half-happened.
+        if (!OperatingSystem.IsWindows() && !OperatingSystem.IsMacOS())
        {
            return new UnavailableUpdateChannel();
        }
@@ -55,14 +60,21 @@ internal static class UpdateChannels
 }

 /// <summary>
-/// The Windows update channel, backed by Velopack against the project's own forge.
+/// The desktop update channel, backed by Velopack against the project's own forge.
 /// </summary>
 /// <remarks>
 /// <para>
-/// The one file in the repository that names Velopack. It lives beside <c>WindowsDeviceKeyStore</c>
-/// rather than in a project of its own because it is the same kind of thing — a Windows-only
-/// implementation of an interface declared in <c>DodoSSH.Client.Session</c> — and because
-/// <c>DodoSSH.Client.Shell</c> is shared with the Android head, which must never acquire an updater.
+/// The one file in the repository that names Velopack. It lives beside the platform key stores rather
+/// than in a project of its own because it is the same kind of thing — a desktop-only implementation of
+/// an interface declared in <c>DodoSSH.Client.Session</c> — and because <c>DodoSSH.Client.Shell</c> is
+/// shared with the Android head, which must never acquire an updater.
+/// </para>
+/// <para>
+/// <b>One class for both desktop platforms, where the key stores are one class each.</b> The difference
+/// is where the platform knowledge sits. A key store is platform knowledge from top to bottom: different
+/// hardware, different API, different failure modes. Velopack's <c>UpdateManager</c> has already absorbed
+/// all of that, and what is left over — check, download, apply, restart — is identical on the two. The
+/// only thing that differs is which string names the feed, and that is <see cref="ChannelFor"/>.
 /// </para>
 /// <para>
 /// See <c>docs/adr/0013-desktop-distribution-and-updates.md</c>.
@@ -103,7 +115,7 @@ internal sealed class VelopackUpdateChannel : IUpdateChannel
    /// but unsaid on one side and stated on the other is how a feed goes quiet with no error anywhere:
    /// the check succeeds, finds nothing, and reports that the client is up to date forever.
    /// </remarks>
-    private const string ReleaseChannel = "win";
+    private const string WindowsReleaseChannel = "win";

    /// <summary>
    /// The nightly channel, which is a different name rather than the same one on a different tag.
@@ -122,7 +134,26 @@ internal sealed class VelopackUpdateChannel : IUpdateChannel
    /// a download somebody watched. A channel each means neither ever sees the other's releases at all.
    /// </para>
    /// </remarks>
-    private const string NightlyChannel = "win-nightly";
+    private const string WindowsNightlyChannel = "win-nightly";
+
+    /// <summary>The macOS release channel, and Velopack's own default there.</summary>
+    /// <remarks>
+    /// A contract with <c>scripts/release-macos.sh</c>, exactly as the Windows pair is one with the
+    /// PowerShell script. Stated for the same reason, which applies with more force here: the four
+    /// channels all publish to one repository, so the only thing keeping a Mac from being offered a
+    /// <c>win</c> package is that it never reads that index.
+    /// </remarks>
+    private const string MacReleaseChannel = "osx";
+
+    /// <summary>The macOS nightly channel.</summary>
+    /// <remarks>
+    /// Named here and not yet published by anything. The CI job for the macOS head builds and bundles
+    /// and deliberately uploads nothing — see the packaging step in <c>ci.yml</c> — so a nightly macOS
+    /// build checking this feed finds an empty channel and reports itself up to date, which is the
+    /// correct behaviour for a channel with no publisher. The name exists so that turning the publisher
+    /// on later is one job rather than a job plus a rename that has to reach every installed client.
+    /// </remarks>
+    private const string MacNightlyChannel = "osx-nightly";

    private readonly UpdateManager manager;

@@ -141,10 +172,13 @@ internal sealed class VelopackUpdateChannel : IUpdateChannel
    /// <inheritdoc />
    public bool IsSupported => true;

-    /// <summary>Always, on this head.</summary>
+    /// <summary>Always, on this head, on either platform.</summary>
    /// <remarks>
-    /// Velopack's apply runs <c>Update.exe</c> over this installation and restarts it, so the process is
-    /// gone by the time anything could have asked a question. The phone's is the other answer; see
+    /// Velopack's apply hands off to a separate updater process — <c>Update.exe</c> on Windows, the
+    /// <c>UpdateMac</c> helper inside the bundle on macOS — which replaces this installation and
+    /// relaunches it, so the process is gone by the time anything could have asked a question. The
+    /// mechanism differs and the answer does not, which is why this is a constant rather than another
+    /// thing <see cref="ChannelFor"/> would have to decide. The phone's is the other answer; see
    /// <see cref="IUpdateChannel.ApplyingEndsTheProcess"/> for what the caller does differently.
    /// </remarks>
    public bool ApplyingEndsTheProcess => true;
@@ -183,7 +217,36 @@ internal sealed class VelopackUpdateChannel : IUpdateChannel

        return new UpdateManager(
            new GiteaSource(RepositoryUrl, accessToken: null, prerelease: nightly),
-            new UpdateOptions { ExplicitChannel = nightly ? NightlyChannel : ReleaseChannel });
+            new UpdateOptions { ExplicitChannel = ChannelFor(nightly) });
+    }
+
+    /// <summary>
+    /// The one of the four channel names this build belongs to.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// Two independent axes — which platform, and which of that platform's two channels — and they are
+    /// resolved in one place so that neither can be answered differently somewhere else. The platform
+    /// half is the running OS rather than anything recorded in the build, because a package can only
+    /// ever be applied on the platform it was built for; the channel half comes from assembly metadata,
+    /// because a release build and a nightly are the same bytes on the same OS and only the metadata
+    /// tells them apart.
+    /// </para>
+    /// <para>
+    /// Windows is the fallback rather than a third branch. Only Windows and macOS reach here at all —
+    /// <see cref="UpdateChannels.ForThisMachine"/> is the gate — so the alternative would be an
+    /// unreachable throw, and an unreachable throw in the middle of the updater is a thing somebody
+    /// later has to reason about to discover it cannot happen.
+    /// </para>
+    /// </remarks>
+    private static string ChannelFor(bool nightly)
+    {
+        if (OperatingSystem.IsMacOS())
+        {
+            return nightly ? MacNightlyChannel : MacReleaseChannel;
+        }
+
+        return nightly ? WindowsNightlyChannel : WindowsReleaseChannel;
    }

    /// <inheritdoc />
@@ -9,9 +9,17 @@ namespace DodoSSH.Client.App.Platform;
 /// </summary>
 /// <remarks>
 /// <para>
-/// One place decides, so nothing above has to carry a platform guard. A machine with no TPM, or one that
-/// is not Windows, gets <see cref="UnavailableDeviceKeyStore"/> and therefore keeps asking for the
-/// passphrase — which is the honest answer rather than a degraded one.
+/// One place decides, so nothing above has to carry a platform guard. A machine with no secure hardware,
+/// or one that is neither Windows nor macOS, gets <see cref="UnavailableDeviceKeyStore"/> and therefore
+/// keeps asking for the passphrase — which is the honest answer rather than a degraded one.
+/// </para>
+/// <para>
+/// <b>Both real stores are asked whether they work rather than told that they do.</b> Each
+/// <c>IsSupported</c> probes by doing the thing — creating a throwaway key and deleting it — because on
+/// both platforms the provider is present and reports itself present on machines where creating a key
+/// fails: a Windows box with no usable TPM, a Mac with no Secure Enclave, and on macOS also every
+/// unsigned development build, since enclave keys need a signing identity. Inferring from the OS would
+/// mean each of those discovering the truth at the moment somebody tried to unlock.
 /// </para>
 /// <para>
 /// <b>"Desktop", because the choice belongs to a head rather than to the session layer.</b> This file used
@@ -29,9 +37,17 @@ public static class DesktopDeviceKeyStores
    {
        ArgumentNullException.ThrowIfNull(paths);

-        return OperatingSystem.IsWindows() && WindowsDeviceKeyStore.IsSupported()
-            ? new WindowsDeviceKeyStore(paths)
-            : new UnavailableDeviceKeyStore();
+        if (OperatingSystem.IsWindows() && WindowsDeviceKeyStore.IsSupported())
+        {
+            return new WindowsDeviceKeyStore(paths);
+        }
+
+        if (OperatingSystem.IsMacOS() && MacDeviceKeyStore.IsSupported())
+        {
+            return new MacDeviceKeyStore(paths);
+        }
+
+        return new UnavailableDeviceKeyStore();
    }
 }

@@ -15,6 +15,28 @@
    Showing the last terminal's pane would be a lie, and showing nothing reads as the application having
    broken, so this says which machine, as whom, and how far along it is.

+    ── The step list, and why it is amber ───────────────────────────────────────────────────────────────
+    "How far along it is" used to be one line of prose that never changed after the tab was created, which
+    made every slow connection look exactly like every hung one. It is now the five steps of actually
+    getting there, each lit at the moment the handshake reports it — see SshConnectionPhase, which names
+    only the boundaries a client can genuinely observe. A connection that stops therefore stops on a named
+    row, and "the host key is being checked" stops being the same screen as "the host is not answering".
+
+    Amber for the step in flight, and that is the palette's rule rather than an exception to it. Green is
+    what is true and purple is what you can press; a step still happening is neither, and it is precisely
+    the caveat-worth-reading amber exists for — see the remark above Warn in Palette.axaml. Steps behind it
+    go green as they become true, and the one a refusal landed on goes red. Nothing on the list is drawn in
+    the accent, because there is nothing on it to press.
+
+    Nothing here animates, which is the argument the transfer strip makes for its own track in
+    TransfersScreen.axaml, arriving at a screen with more reason to want a spinner. A spinner is furniture
+    invented to fill a state nobody measured; these steps are measured, so the track fills to what has
+    actually finished and then waits there. Waiting is what waiting looks like.
+
+    The list is drawn for both states rather than once per state. A refused connection has the same five
+    rows and the same track — the difference is only that one row is red and the track stops — and drawing
+    it twice would be two templates to keep identical for the sake of a colour.
+
    It obeys the occlusion rule the whole window obeys: this is Avalonia-drawn content in the WebView's own
    rectangle, so the shell collapses the terminal while it is up. IsTerminalShowing and IsConnectingShowing
    are exclusive by construction — a selected tab either has a session or it does not — which is what makes
@@ -24,8 +46,69 @@
    can be laid out by a test: WebView2's adapter refuses the headless session's thread.
  -->

+  <UserControl.Styles>
+
+    <!--
+      A rule per lit state over one quiet default, so that the pending weight is stated once and each state
+      that differs from it is the one line that says how.
+    -->
+    <Style Selector="TextBlock.stepcaption">
+      <Setter Property="Foreground" Value="{StaticResource TextFaint}" />
+      <Setter Property="FontSize" Value="12" />
+      <Setter Property="VerticalAlignment" Value="Center" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.done">
+      <Setter Property="Foreground" Value="{StaticResource TextDim}" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.running">
+      <Setter Property="Foreground" Value="{StaticResource WarnText}" />
+      <Setter Property="FontWeight" Value="Medium" />
+    </Style>
+    <Style Selector="TextBlock.stepcaption.stopped">
+      <Setter Property="Foreground" Value="{StaticResource DangerText}" />
+    </Style>
+
+    <!--
+      The marker beside each caption. Fixed width and centred, because four different characters on a
+      ragged left edge is a list that looks broken; see ConnectionStepViewModel.Mark for which they are.
+    -->
+    <Style Selector="TextBlock.stepmark">
+      <Setter Property="Foreground" Value="{StaticResource BorderMid}" />
+      <Setter Property="FontSize" Value="12" />
+      <Setter Property="Width" Value="14" />
+      <Setter Property="TextAlignment" Value="Center" />
+      <Setter Property="VerticalAlignment" Value="Center" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.done">
+      <Setter Property="Foreground" Value="{StaticResource Live}" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.running">
+      <Setter Property="Foreground" Value="{StaticResource Warn}" />
+    </Style>
+    <Style Selector="TextBlock.stepmark.stopped">
+      <Setter Property="Foreground" Value="{StaticResource Danger}" />
+    </Style>
+
+    <!--
+      The track over the list. Amber while the attempt is alive and red once it is not, so that the bar says
+      the same thing as the row it stopped on rather than staying the colour of something still being waited
+      for. Chip underneath, matching the transfer strip's track.
+    -->
+    <Style Selector="ProgressBar.steptrack">
+      <Setter Property="Height" Value="5" />
+      <Setter Property="MinHeight" Value="5" />
+      <Setter Property="CornerRadius" Value="3" />
+      <Setter Property="Background" Value="{StaticResource Chip}" />
+      <Setter Property="Foreground" Value="{StaticResource Warn}" />
+    </Style>
+    <Style Selector="ProgressBar.steptrack.stopped">
+      <Setter Property="Foreground" Value="{StaticResource Danger}" />
+    </Style>
+
+  </UserControl.Styles>
+
  <Panel>
-    <StackPanel VerticalAlignment="Center" HorizontalAlignment="Center" Spacing="14" MaxWidth="460"
+    <StackPanel VerticalAlignment="Center" HorizontalAlignment="Center" Spacing="18" MaxWidth="460"
                Margin="24">

      <StackPanel Spacing="6" HorizontalAlignment="Center">
@@ -38,15 +121,43 @@
      </StackPanel>

      <!--
-        Two states, deliberately different. Waiting is an accent line under the host's name; a refusal is
-        the reason, in the palette's red, because it is the only place the reason will be after the user
-        navigates away from the screen that started the connection.
+        Bound to StepsDone against StepCount rather than to a percentage: five steps and a maximum of five
+        means the bar is a count of things that really finished, and the arithmetic that would turn it into
+        a percentage is exactly the arithmetic that would start inventing one.
      -->
-      <TextBlock Classes="mono" Text="{Binding SelectedTab.Status}" FontSize="12"
-                 Foreground="{StaticResource Accent}" HorizontalAlignment="Center"
-                 TextWrapping="Wrap" TextAlignment="Center"
-                 IsVisible="{Binding SelectedTab.IsConnecting}" />
+      <ProgressBar Classes="steptrack" Classes.stopped="{Binding SelectedTab.IsFailed}"
+                   Minimum="0" Maximum="{Binding SelectedTab.StepCount}"
+                   Value="{Binding SelectedTab.StepsDone, Mode=OneWay}" />

+      <ItemsControl ItemsSource="{Binding SelectedTab.Steps}" HorizontalAlignment="Center">
+        <ItemsControl.ItemsPanel>
+          <ItemsPanelTemplate>
+            <StackPanel Spacing="7" />
+          </ItemsPanelTemplate>
+        </ItemsControl.ItemsPanel>
+        <ItemsControl.ItemTemplate>
+          <DataTemplate x:DataType="vm:ConnectionStepViewModel">
+            <StackPanel Orientation="Horizontal" Spacing="10">
+              <TextBlock Classes="stepmark"
+                         Classes.done="{Binding IsDone}"
+                         Classes.running="{Binding IsRunning}"
+                         Classes.stopped="{Binding IsStopped}"
+                         Text="{Binding Mark}" />
+              <TextBlock Classes="stepcaption mono"
+                         Classes.done="{Binding IsDone}"
+                         Classes.running="{Binding IsRunning}"
+                         Classes.stopped="{Binding IsStopped}"
+                         Text="{Binding Caption}" />
+            </StackPanel>
+          </DataTemplate>
+        </ItemsControl.ItemTemplate>
+      </ItemsControl>
+
+      <!--
+        A refusal is the reason, in the palette's red, because it is the only place the reason will be after
+        the user navigates away from the screen that started the connection. It sits under the list rather
+        than replacing it: which row it stopped on is half the answer and the sentence is the other half.
+      -->
      <SelectableTextBlock Text="{Binding SelectedTab.Status}" FontSize="13"
                           Foreground="{StaticResource Danger}" HorizontalAlignment="Center"
                           TextWrapping="Wrap" TextAlignment="Center"
@@ -62,14 +173,23 @@
        handshake that finishes afterwards is adopted rather than dropped — see
        MainWindowViewModel.CloseTabAsync. Two buttons rather than one with a converted label, because the
        two are different decisions and only one of them abandons something still running.
-      -->
-      <Button Classes="ghost" HorizontalAlignment="Center" Content="GIVE UP"
-              Command="{Binding CloseTabCommand}" CommandParameter="{Binding SelectedTab}"
-              IsVisible="{Binding SelectedTab.IsConnecting}" />

-      <Button Classes="ghost" HorizontalAlignment="Center" Content="CLOSE TAB"
-              Command="{Binding CloseTabCommand}" CommandParameter="{Binding SelectedTab}"
-              IsVisible="{Binding SelectedTab.IsFailed}" />
+        Beside each, the logs. The step list is this attempt and the log is every other one, which is the
+        question both a connection taking too long and a connection just refused actually raise — has this
+        machine ever worked. It is the ordinary rail destination reached the ordinary way rather than a
+        second log grown inside this card, and leaving by it does not abandon the handshake: the tab stays
+        in the strip and the card is still here on the way back.
+      -->
+      <StackPanel Orientation="Horizontal" Spacing="10" HorizontalAlignment="Center">
+        <Button Classes="ghost" Content="SHOW LOGS" Command="{Binding ShowScreenCommand}"
+                CommandParameter="{x:Static vm:ShellScreen.Logs}" />
+        <Button Classes="ghost" Content="GIVE UP" Command="{Binding CloseTabCommand}"
+                CommandParameter="{Binding SelectedTab}"
+                IsVisible="{Binding SelectedTab.IsConnecting}" />
+        <Button Classes="ghost" Content="CLOSE TAB" Command="{Binding CloseTabCommand}"
+                CommandParameter="{Binding SelectedTab}"
+                IsVisible="{Binding SelectedTab.IsFailed}" />
+      </StackPanel>

    </StackPanel>
  </Panel>
@@ -584,6 +584,56 @@
                  </ComboBox.ItemTemplate>
                </ComboBox>

+                <!--
+                  Making a credential without leaving the host. The moment one is wanted is this one: somebody
+                  is deciding how a host authenticates and finds the password is not in the keychain yet, and
+                  sending them to the other screen to add it would lose the half-typed host they are standing
+                  in. Same argument as the new-tag box further down, same immediate write, same honest
+                  consequence — the credential stays if this editor is cancelled, because a host can only name
+                  an id that exists.
+
+                  A button beside the picker rather than an entry inside it. Every row of that list is a
+                  binding the host can have; "make a new one" is an action, and as an entry it would sit in the
+                  box afterwards describing a state no host can be in.
+                -->
+                <Button Classes="ghost" Content="+ NEW CREDENTIAL" HorizontalAlignment="Left"
+                        FontSize="10.5" Height="28" Padding="10,0"
+                        IsVisible="{Binding !IsAddingEditorCredential}"
+                        Command="{Binding BeginEditorCredentialCommand}"
+                        ToolTip.Tip="Adds a credential to the keychain and binds this host to it" />
+
+                <Border CornerRadius="12" Background="{StaticResource Field}"
+                        BorderBrush="{StaticResource Border}" BorderThickness="1" Padding="12"
+                        IsVisible="{Binding IsAddingEditorCredential}">
+                  <StackPanel Spacing="6">
+                    <TextBlock Classes="label" Text="NEW CREDENTIAL" FontSize="10" />
+                    <TextBox Text="{Binding EditorNewCredentialLabel}" PlaceholderText="name" Height="36" />
+                    <!--
+                      Optional, and what makes a credential worth being its own item: one account on twenty
+                      machines is rotated in one place. Left blank, this host's own username is used.
+                    -->
+                    <TextBox Text="{Binding EditorNewCredentialUsername}" Height="36"
+                             PlaceholderText="username (blank: use this host's own)" />
+                    <!-- Masked, on the reasoning the keychain's own password box carries. -->
+                    <TextBox Text="{Binding EditorNewCredentialPassword}" PlaceholderText="password"
+                             PasswordChar="•" Height="36">
+                      <TextBox.KeyBindings>
+                        <KeyBinding Gesture="Enter" Command="{Binding AddEditorCredentialCommand}" />
+                      </TextBox.KeyBindings>
+                    </TextBox>
+                    <TextBox Text="{Binding EditorNewCredentialNotes}" PlaceholderText="notes"
+                             AcceptsReturn="True" Height="44" TextWrapping="Wrap" />
+                    <TextBlock Classes="hint" FontSize="10.5" TextWrapping="Wrap"
+                               Text="Added to the keychain as soon as you press ADD, so it stays even if you cancel this host. Renaming and deleting are on the keychain screen." />
+                    <StackPanel Orientation="Horizontal" Spacing="6">
+                      <Button Classes="accent" Content="ADD"
+                              Command="{Binding AddEditorCredentialCommand}" />
+                      <Button Classes="ghost" Content="CANCEL"
+                              Command="{Binding CancelEditorCredentialCommand}" />
+                    </StackPanel>
+                  </StackPanel>
+                </Border>
+
                <!--
                  ◆ THE RELAY CARD, restyled to the mock's nested-card shape — radius 12, a checkbox with the
                  title beside it rather than under it — but NOT to the mock's copy. The sentence stays
@@ -98,6 +98,18 @@

  <Grid ColumnDefinitions="*,Auto">

+    <!--
+      ── 26 DOWN EACH SIDE, the same inset Keychain, Snips, Logs and Pins all take. ──────────────────────
+      Those four say it once, as Margin="26" on their own root; this screen repeats it on each of the four
+      rows below, and it has to. The board's ScrollViewer is the last row and is deliberately full-bleed, so
+      that its scrollbar rides the pane's own edge rather than floating 26 pixels inside it — a root margin
+      would inset the bar with everything else. It would also inset the drawer in the second column, which
+      draws its own edge and wants none.
+
+      It was 16 and 20 until this pass, which put the Hosts header a visible step left of and above every
+      other screen's. Four numbers rather than one is the cost of the two exceptions above; changing one of
+      them means changing all four.
+    -->
    <Grid Grid.Column="0" RowDefinitions="Auto,Auto,Auto,*">

      <!--
@@ -107,7 +119,7 @@
        buttons over a board of forty is a pair whose subject the user has to work out. The group's own
        Edit/Move/Delete sit on its own heading's menu for the same reason.
      -->
-      <Grid Grid.Row="0" Margin="16,20,16,16" ColumnDefinitions="Auto,Auto,*,Auto,Auto,Auto">
+      <Grid Grid.Row="0" Margin="26,26,26,16" ColumnDefinitions="Auto,Auto,*,Auto,Auto,Auto">

        <TextBlock Grid.Column="0" Text="Hosts" FontSize="33" FontWeight="Bold" LetterSpacing="-0.5"
                   Foreground="{StaticResource Text}" VerticalAlignment="Center" />
@@ -219,7 +231,7 @@
        Ctrl+K is named on it because the palette is the other way to reach a host by typing, and somebody
        who has found this box should know about the one that also connects on Enter.
      -->
-      <Border Grid.Row="1" Margin="16,0,16,16">
+      <Border Grid.Row="1" Margin="26,0,26,16">
        <TextBox x:Name="HostFilter" Text="{Binding HostFilter}" Height="40" CornerRadius="10"
                 FontFamily="{StaticResource MonoFont}"
                 PlaceholderText="Find a host by name, address or note…   ·   Ctrl+K searches and connects" />
@@ -232,7 +244,7 @@
        one of them sits here, above the board, rather than laid over it: a card over the cards would hide
        the very ticks or the very group it is asking about.
      -->
-      <StackPanel Grid.Row="2" Margin="16,0,16,12" Spacing="10">
+      <StackPanel Grid.Row="2" Margin="26,0,26,12" Spacing="10">

        <!--
          The conflict log. The merge is only allowed to pick a winner because the value it overrode is kept
@@ -434,7 +446,7 @@
        HostsScreen.axaml.cs.
      -->
      <ScrollViewer Grid.Row="3" x:Name="Scroll" HorizontalScrollBarVisibility="Disabled">
-        <StackPanel Margin="16,0,16,20" Spacing="16">
+        <StackPanel Margin="26,0,26,26" Spacing="16">

          <!--
            Named because it is where keyboard focus lands when the terminal gives it back, and because
@@ -690,7 +702,7 @@
                                  <Border Classes="chip" Height="19" CornerRadius="5" Padding="6,2"
                                          IsVisible="{Binding HasPins}">
                                    <StackPanel Orientation="Horizontal" Spacing="3">
-                                      <TextBlock Text="&#xE946;" FontFamily="{StaticResource IconFont}"
+                                      <TextBlock Text="&#xF10D;" FontFamily="{StaticResource IconFont}"
                                                 FontSize="11" Foreground="{StaticResource TextFaint}" />
                                      <TextBlock Classes="mono" Text="{Binding PinCount}" FontSize="10.5"
                                                 Foreground="{StaticResource TextFaint}" />
@@ -148,13 +148,17 @@
                <Border Grid.Row="1" BorderBrush="{StaticResource Border}" BorderThickness="1"
                        CornerRadius="0,0,12,12" ClipToBounds="True">
                  <Grid ColumnDefinitions="*,Auto">
-                    <Grid Grid.Column="0" RowDefinitions="Auto,*,Auto">
-                      <views:SessionHeader Grid.Row="0"
-                                            OpenLabel="Open terminal"
-                                            OpenCommand="{Binding OpenTerminalForFilesHostCommand}"
-                                            EmptyText="{Binding Transfers.Status}" />
-                      <views:TransfersScreen Grid.Row="1" DataContext="{Binding Transfers}" />
-                      <views:SessionStatusBar Grid.Row="2" />
+                    <!--
+                      v5c-4: two rows rather than three. The 60-pixel host header that used to sit above this
+                      screen is gone; the address and the "Open terminal" button it carried are in the
+                      sidebar now — see SessionSidebar.axaml — and the pane keeps the height. Its third
+                      binding, the Transfers.Status line it printed while no host was open, is not moved
+                      either: TransfersScreen draws that same string itself, both in its own empty state and
+                      beside the remote pane's DISCONNECT once something is open.
+                    -->
+                    <Grid Grid.Column="0" RowDefinitions="*,Auto">
+                      <views:TransfersScreen Grid.Row="0" DataContext="{Binding Transfers}" />
+                      <views:SessionStatusBar Grid.Row="1" />
                    </Grid>
                    <!--
                      Hides when no session is active — see ShowsQuickAccessSidebar — rather than always
@@ -268,14 +272,16 @@
            <Border Grid.Row="1" BorderBrush="{StaticResource Border}" BorderThickness="1"
                    CornerRadius="0,0,12,12" ClipToBounds="True">
              <Grid ColumnDefinitions="*,Auto">
-                <Grid Grid.Column="0" RowDefinitions="Auto,*,Auto">
-                  <views:SessionHeader Grid.Row="0"
-                                        OpenLabel="Open SFTP"
-                                        OpenCommand="{Binding SelectFilesHostCommand}"
-                                        OpenCommandParameter="{Binding SelectedTab}"
-                                        EmptyText="no terminals open · press + or Ctrl+K, or choose a host and press Connect" />
+                <!--
+                  v5c-4: two rows rather than three, the same as the SFTP wrapper above and for the same
+                  reason — the host header is gone and the terminal has its 60 pixels. The empty state it
+                  used to print ("no terminals open · press + or Ctrl+K…") went with it rather than moving:
+                  this Grid is only drawn on the terminal surface, and the surface with no tab open already
+                  answers for itself in the tab row's own "+" and in the connecting card below.
+                -->
+                <Grid Grid.Column="0" RowDefinitions="*,Auto">

-                  <Panel Grid.Row="1" Background="{StaticResource Pane}">
+                  <Panel Grid.Row="0" Background="{StaticResource Pane}">

                    <!--
                      The other thing that can be in the terminal's rectangle: a tab whose session does not
@@ -300,7 +306,7 @@

                  </Panel>

-                  <views:SessionStatusBar Grid.Row="2" ShowsEncoding="True" />
+                  <views:SessionStatusBar Grid.Row="1" ShowsEncoding="True" />
                </Grid>
                <!--
                  Hides when no session is active — see ShowsQuickAccessSidebar — rather than always drawn:
@@ -54,6 +54,21 @@ internal sealed partial class MainWindow : Window
        };
    }

+    /// <summary>
+    /// Colours the system-drawn frame the moment there is a handle to colour it on.
+    /// </summary>
+    /// <remarks>
+    /// <c>OnOpened</c> and not the constructor: the window has no platform handle until it is shown, and
+    /// <see cref="NativeWindowFrame"/> does nothing without one. See that class for what the frame is and
+    /// why <c>BorderOnly</c> still has one.
+    /// </remarks>
+    protected override void OnOpened(EventArgs e)
+    {
+        base.OnOpened(e);
+
+        NativeWindowFrame.MatchTo(this);
+    }
+
    /// <summary>
    /// Asks the Linux backend for the one mode it can actually draw inside this window.
    /// </summary>
@@ -268,6 +283,7 @@ internal sealed partial class MainWindow : Window
        if (shell is { } previous)
        {
            previous.TerminalSessionOpened -= OnTerminalSessionOpened;
+            previous.TerminalFocusRequested -= OnTerminalFocusRequested;
            previous.PropertyChanged -= OnShellPropertyChanged;
        }

@@ -286,6 +302,7 @@ internal sealed partial class MainWindow : Window
        wasUnlocked = viewModel.IsUnlocked;

        viewModel.TerminalSessionOpened += OnTerminalSessionOpened;
+        viewModel.TerminalFocusRequested += OnTerminalFocusRequested;
        viewModel.PropertyChanged += OnShellPropertyChanged;
    }

@@ -298,6 +315,15 @@ internal sealed partial class MainWindow : Window
    /// </remarks>
    private void OnTerminalSessionOpened(object? sender, EventArgs e) => FocusTerminalWhenLaidOut();

+    /// <remarks>
+    /// The same call for a session that was already open and has just been typed into from the sidebar —
+    /// see <see cref="MainWindowViewModel.TerminalFocusRequested"/>. Posted like every other path here,
+    /// although nothing was revealed this turn: the post also re-checks that a terminal is still showing,
+    /// which is what keeps this from stealing the keyboard if the insert landed the user on the snippets
+    /// screen instead.
+    /// </remarks>
+    private void OnTerminalFocusRequested(object? sender, EventArgs e) => FocusTerminalWhenLaidOut();
+
    /// <remarks>
    /// A dispatch and nothing else. Every arm below is a separate decision about where the keyboard goes,
    /// and they were one method until the four of them stopped fitting in a screenful — which is roughly the
@@ -0,0 +1,133 @@
+using System.Runtime.InteropServices;
+using Avalonia.Controls;
+using Avalonia.Media;
+
+namespace DodoSSH.Client.App.Views;
+
+/// <summary>
+/// Paints the frame Windows still draws around a <c>BorderOnly</c> window in the application's own
+/// colour, so the top edge stops reading as a leftover system titlebar.
+/// </summary>
+/// <remarks>
+/// <para>
+/// <b>The symptom this exists for:</b> a pale strip across the very top of the window, a few pixels
+/// tall and plainly not part of the application — most obvious on a machine with "show accent colour
+/// on title bars and window borders" turned on, where it comes out blue against a near-black shell.
+/// </para>
+/// <para>
+/// It is not <c>TitleBar.axaml</c> leaking and it is not a margin. It is DWM, and the reason it is
+/// there is visible in Avalonia's own Win32 backend: <c>WindowImpl.UpdateWindowProperties</c> gives a
+/// <see cref="WindowDecorations.BorderOnly"/> window <c>WS_BORDER | WS_THICKFRAME</c> and then calls
+/// <c>DwmExtendFrameIntoClientArea</c> with one-pixel margins on all four sides. So the compositor
+/// owns a hairline of every edge of this window, and it fills that hairline with the system's caption
+/// and border colours — which are chosen by the user's personalisation settings and have no reason to
+/// resemble <c>CanvasColor</c>. The window is the wrong place to look for the pixels; they were never
+/// painted by anything in this tree.
+/// </para>
+/// <para>
+/// The fix is to tell DWM what colour to use rather than to try to cover it. <c>DWMWA_BORDER_COLOR</c>
+/// and <c>DWMWA_CAPTION_COLOR</c> arrived in Windows 11 21H2 and are exactly that; both are set to the
+/// window's own background, so the hairline still exists — the resize grip is on it, and the drop
+/// shadow hangs off it — and simply cannot be seen. Deliberately <em>not</em> <c>DWMWA_COLOR_NONE</c>,
+/// which removes the border outright: on a dark desktop that leaves a near-black window with no edge
+/// at all, which trades one visual defect for another.
+/// </para>
+/// <para>
+/// Windows 10 gets the dark-mode attribute and nothing else, and that is the whole of what is
+/// available there: the two colour attributes are unsupported, <c>DwmSetWindowAttribute</c> answers
+/// <c>E_INVALIDARG</c>, and the calls do nothing. Hence the ignored return values — every attribute
+/// here is an improvement where it lands and a no-op where it does not, so there is nothing for a
+/// caller to handle and nothing worth logging on a path that runs once at startup.
+/// </para>
+/// </remarks>
+internal static class NativeWindowFrame
+{
+    /// <summary>Windows 11 21H2 and later: the colour of the frame border.</summary>
+    private const int BorderColorAttribute = 34;
+
+    /// <summary>Windows 11 21H2 and later: the colour of the caption, including the extended frame.</summary>
+    private const int CaptionColorAttribute = 35;
+
+    /// <summary>
+    /// Windows 10 1903 and later: draw the frame in the dark palette.
+    /// </summary>
+    /// <remarks>
+    /// Redundant on Windows 11, where the two colour attributes above name the colours outright, and it
+    /// is set anyway because it is the only one of the three that Windows 10 honours. The build before
+    /// 1903 used attribute 19 for this; that is not chased here, because a border on an OS release that
+    /// left support in 2020 is not worth a second interop call.
+    /// </remarks>
+    private const int DarkModeAttribute = 20;
+
+    /// <summary>
+    /// Matches <paramref name="window"/>'s system-drawn frame to the colour it paints itself.
+    /// </summary>
+    /// <remarks>
+    /// Call once the window has a handle — <c>OnOpened</c> is the first such moment. Calling earlier
+    /// finds no platform handle and silently does nothing, which is the defect this replaced: the strip
+    /// is only visible once the window is on screen, so a call that ran too early looks like a fix that
+    /// does not work rather than a fix that never ran.
+    /// </remarks>
+    internal static void MatchTo(Window window)
+    {
+        // Every attribute below is a DWM one, and DWM is Windows. Elsewhere the frame is drawn by the
+        // platform's own compositor and there is nothing here to say to it.
+        if (!OperatingSystem.IsWindows())
+        {
+            return;
+        }
+
+        if (window.TryGetPlatformHandle()?.Handle is not { } handle || handle == IntPtr.Zero)
+        {
+            return;
+        }
+
+        Set(handle, DarkModeAttribute, 1);
+
+        // The window's own Background rather than a named resource, so the frame cannot drift from the
+        // canvas when the palette moves. A brush that is not solid — a gradient, or nothing set at all —
+        // has no single colour to match, and leaving the system's own is better than inventing one.
+        if (window.Background is not ISolidColorBrush { Color: var canvas })
+        {
+            return;
+        }
+
+        var reference = ColorRef(canvas);
+        Set(handle, BorderColorAttribute, reference);
+        Set(handle, CaptionColorAttribute, reference);
+    }
+
+    /// <summary>
+    /// Sets one integer-valued DWM attribute, and discards the answer.
+    /// </summary>
+    /// <remarks>
+    /// The discard is the point of this method existing rather than being three call sites. Every
+    /// attribute here is unsupported on some Windows this application runs on, and unsupported means
+    /// <c>E_INVALIDARG</c> and no change — which is the intended outcome on that OS, not a failure, so
+    /// there is nothing for the caller to do with the <c>HRESULT</c> and nothing worth logging once at
+    /// startup. Written once, with the reasoning, rather than left implicit at each call.
+    /// </remarks>
+    private static void Set(IntPtr window, int attribute, int value) =>
+        _ = DwmSetWindowAttribute(window, attribute, ref value, sizeof(int));
+
+    /// <summary>
+    /// Packs <paramref name="color"/> into a Win32 <c>COLORREF</c>.
+    /// </summary>
+    /// <remarks>
+    /// <c>0x00BBGGRR</c> — blue in the high byte, not red, and the alpha byte must be zero. Getting the
+    /// order wrong produces a plausible-looking wrong colour rather than an error, which is the kind of
+    /// bug that survives a glance at the window.
+    /// </remarks>
+    private static int ColorRef(Color color) => color.R | (color.G << 8) | (color.B << 16);
+
+    /// <remarks>
+    /// <c>DllImport</c> rather than <c>LibraryImport</c>, for the reason
+    /// <see cref="NativeKeyboardFocus"/> gives at its own P/Invoke: the generated form needs
+    /// <c>AllowUnsafeBlocks</c> across a project that handles key material, and this signature is
+    /// blittable, so there is no marshalling for it to improve.
+    /// </remarks>
+#pragma warning disable SYSLIB1054
+    [DllImport("dwmapi.dll")]
+    private static extern int DwmSetWindowAttribute(IntPtr window, int attribute, ref int value, int size);
+#pragma warning restore SYSLIB1054
+}
@@ -40,8 +40,9 @@
    Both are still one click away; see the popover below the user chip. The chip itself carries the signed-
    in identity this application actually has — a display name and, where the server sent one, an email —
    which is also new: the titlebar drew an account name and a vault chip before this pass and does not any
-    more. See TitleBar.axaml and design-notes/v5b-fidelity-notes.md for the deviations this rail keeps on
-    purpose: Pins, which the mock has no screen for at all, and the S3 segment above.
+    more. See TitleBar.axaml and design-notes/v5b-fidelity-notes.md for the one deviation this rail still
+    keeps on purpose: the S3 segment above. Pins was the other, and it is gone — see the remark where that
+    row used to sit, between Keys and Snips.

    Buttons rather than a TabStrip or a ListBox, still, for the reason the v3 remark gave: all three hold
    the selection themselves, so a click would move the highlight before the shell decided anything, and a
@@ -128,19 +129,16 @@
          </Button>

          <!--
-            KEPT — the mock has no screen for approved host keys at all; see the file-level remark. push_pin
-            is the same codepoint HostsScreen.axaml already draws for a host's own pin badge, reused rather
-            than picked afresh so the one concept reads as one glyph everywhere it appears.
+            ◆ NO Pins ROW. The pins screen is still here and still reached in one click — from "Host keys"
+            on the Keys screen's own header, which is where a list of approved host keys belongs: they are
+            keychain material, and that button was already the second way to reach them. Two rail rows away
+            from each other, both landing on the same screen, is a rail that has to be read twice.
+
+            It is also the last of the rail's own deviations from the mock to go. The row was kept in v5b on
+            the grounds that the design has no screen for approved host keys at all — see the file-level
+            remark — which is true of the design and was never a reason for a rail entry once the keychain
+            had a door to the same place.
          -->
-          <Button Classes="flat nav" Classes.active="{Binding IsKnownHostsShowing}"
-                  Command="{Binding ShowScreenCommand}"
-                  CommandParameter="{x:Static vm:ShellScreen.KnownHosts}"
-                  ToolTip.Tip="Host keys you have approved, and how to withdraw one">
-            <StackPanel Orientation="Horizontal" Spacing="10">
-              <TextBlock Classes="navicon" Text="&#xE946;" />
-              <TextBlock Classes="navlabel" Text="Pins" />
-            </StackPanel>
-          </Button>

          <Button Classes="flat nav" Classes.active="{Binding IsSnippetsShowing}"
                  Command="{Binding ShowScreenCommand}"
@@ -191,17 +189,22 @@
        </Grid>

        <FlyoutBase.AttachedFlyout>
-          <Flyout Placement="TopEdgeAlignedLeft">
-            <StackPanel Width="227" Spacing="8">
+          <!--
+            FlyoutPresenterClasses, because a Flyout's own panel is not in this markup's visual tree to be
+            styled from here — see FlyoutPresenter.poppanel in App.axaml for what the class carries and why
+            the shared popup rule was not simply widened to cover it.
+          -->
+          <Flyout Placement="TopEdgeAlignedLeft" FlyoutPresenterClasses="poppanel">
+            <StackPanel Width="227" Spacing="4">

              <!--
                The real email, when the server sent one — verified against MainWindowViewModel.Email rather
                than assumed, and simply absent from the popover when it has not. No " · Org" suffix: there
                is no organisation concept behind a vault, only the vault itself, which the rows below name.
              -->
-              <TextBlock FontSize="10.5" FontWeight="Medium" LetterSpacing="0.1"
+              <TextBlock FontSize="10.5" FontWeight="Medium" LetterSpacing="0.1" Margin="11,4,11,6"
                         Foreground="{StaticResource TextGhost}"
-                         Text="{Binding Email}"
+                         Text="{Binding Email}" TextTrimming="CharacterEllipsis"
                         IsVisible="{Binding Email, Converter={x:Static StringConverters.IsNotNullOrEmpty}}" />

              <!--
@@ -246,7 +249,7 @@
                </Grid>
              </Button>

-              <Border Height="1" Background="{StaticResource BorderMid}" />
+              <Border Height="1" Margin="11,4" Background="{StaticResource BorderMid}" />

              <!--
                v5c: Settings, Vaults and Preferences now each land on their own page of the settings mode —
@@ -260,16 +263,23 @@
              <Button Classes="poprow" Click="OnPopoverSettingsPressed">
                <StackPanel Orientation="Horizontal" Spacing="10">
                  <TextBlock FontFamily="{StaticResource IconFont}" Text="&#xE8B8;" FontSize="12"
-                             Foreground="{StaticResource Text}" />
+                             Foreground="{StaticResource TextGhost}" />
                  <TextBlock Text="Settings" FontSize="10" Foreground="{StaticResource Text}" />
                </StackPanel>
              </Button>

+              <!--
+                ◆ THE SAME TREATMENT AS SETTINGS ABOVE AND LOGOUT BELOW, which these two did not have: their
+                label was TextGhost where the other two rows' was Text, so a menu of five equally live
+                destinations drew two of them in the colour this window uses for something switched off. The
+                icons stay one step quieter than the words — the idiom the nav rail's own rows already follow
+                — but "quieter than the word beside it" and "dimmed" are not the same statement.
+              -->
              <Button Classes="poprow" Click="OnPopoverVaultsPressed">
                <StackPanel Orientation="Horizontal" Spacing="10">
                  <TextBlock FontFamily="{StaticResource IconFont}" Text="&#xE84F;" FontSize="12"
                             Foreground="{StaticResource TextGhost}" />
-                  <TextBlock Text="Vaults" FontSize="10" Foreground="{StaticResource TextGhost}" />
+                  <TextBlock Text="Vaults" FontSize="10" Foreground="{StaticResource Text}" />
                </StackPanel>
              </Button>

@@ -277,11 +287,11 @@
                <StackPanel Orientation="Horizontal" Spacing="10">
                  <TextBlock FontFamily="{StaticResource IconFont}" Text="&#xE429;" FontSize="12"
                             Foreground="{StaticResource TextGhost}" />
-                  <TextBlock Text="Preferences" FontSize="10" Foreground="{StaticResource TextGhost}" />
+                  <TextBlock Text="Preferences" FontSize="10" Foreground="{StaticResource Text}" />
                </StackPanel>
              </Button>

-              <Border Height="1" Background="{StaticResource BorderMid}" />
+              <Border Height="1" Margin="11,4" Background="{StaticResource BorderMid}" />

              <!--
                The existing sign-out flow, with its own confirm card — see
@@ -291,7 +301,7 @@
              <Button Classes="poprow" Click="OnPopoverLogoutPressed">
                <StackPanel Orientation="Horizontal" Spacing="10">
                  <TextBlock FontFamily="{StaticResource IconFont}" Text="&#xE9BA;" FontSize="12"
-                             Foreground="{StaticResource Text}" />
+                             Foreground="{StaticResource TextGhost}" />
                  <TextBlock Text="Logout" FontSize="10" Foreground="{StaticResource Text}" />
                </StackPanel>
              </Button>
@@ -87,12 +87,27 @@
                               TextTrimming="CharacterEllipsis" />
                  </StackPanel>
                  <!--
+                    Two readings stacked against the two on the left, and in the same order: what this row
+                    IS above, how it is reached below.
+
+                    ◆ THE VAULT, and only when there is more than one to be in — HostRowViewModel.VaultBadge
+                    is empty otherwise, which collapses the line and leaves the kind word centred as it was.
+                    The palette searches every readable vault at once, so without it two hosts a team and a
+                    person both call "prod-db" are two identical rows, and Enter takes whichever the ranking
+                    happened to put first. Trimmed against a cap because the column is Auto-sized: a long
+                    vault name would otherwise take its width out of the host name beside it.
+
                    credential / key / password — never the mock's SSH/SFTP kind column. Every palette
                    connect here is SSH, so printing that word would be a constant dressed up as a reading;
                    see hosts-v5-design-spec.md's deviations and HostRowViewModel.Authentication.
                  -->
-                  <TextBlock Grid.Column="2" Classes="mono qcrow-subtext" Text="{Binding Authentication}"
-                             FontSize="11" Margin="10,0,0,0" VerticalAlignment="Center" />
+                  <StackPanel Grid.Column="2" Spacing="1" Margin="10,0,0,0" VerticalAlignment="Center">
+                    <TextBlock Classes="mono qcrow-subtext" Text="{Binding VaultBadge}" FontSize="10"
+                               HorizontalAlignment="Right" MaxWidth="150"
+                               TextTrimming="CharacterEllipsis" IsVisible="{Binding HasVaultBadge}" />
+                    <TextBlock Classes="mono qcrow-subtext" Text="{Binding Authentication}"
+                               FontSize="11" HorizontalAlignment="Right" />
+                  </StackPanel>
                </Grid>
              </Border>
            </DataTemplate>
@@ -1,49 +0,0 @@
-<UserControl xmlns="https://github.com/avaloniaui"
-             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-             xmlns:vm="using:DodoSSH.Client.Shell.ViewModels"
-             x:Class="DodoSSH.Client.App.Views.SessionHeader"
-             x:Name="Root"
-             x:DataType="vm:MainWindowViewModel">
-
-  <!--
-    ── v5b's session shell host header ──────────────────────────────────────────────────────────────────────
-    60px, DeepChrome, atop the pane both the terminal and the SFTP surface hold. Per the design, minus the
-    three deviations design-notes/v5b-fidelity-notes.md records: no OS label, no latency reading, no "Port
-    forward" button — none of those are facts this application has.
-
-    ◆ THE ONE FACT LEFT is the address, read off MainWindowViewModel.SessionAddress — which is already the
-    surface-aware property, so this control asks no question about which screen it is on. What differs
-    between the two usages is only the cross-surface button: <see cref="OpenLabel"/>, <see cref="OpenCommand"/>
-    and the empty-state copy, all handed in from MainWindow.axaml rather than branched on here.
-  -->
-
-  <Border Height="60" Background="{StaticResource DeepChrome}"
-          BorderBrush="{StaticResource Border}" BorderThickness="0,0,0,1">
-    <Grid ColumnDefinitions="*,Auto" Margin="24,0,20,0">
-
-      <!--
-        The address, only while a session/host context is active — see SessionAddress's own remark for what
-        "active" means on each surface. The empty state takes its place otherwise, in the idiom every other
-        screen's own "nothing yet" sentence already uses: TextFaint, sentence case, no punctuation implying a
-        form to fill in.
-      -->
-      <TextBlock Grid.Column="0" FontFamily="{StaticResource MonoFont}" FontWeight="Bold" FontSize="14"
-                 Foreground="{StaticResource AccentText}" VerticalAlignment="Center"
-                 Text="{Binding SessionAddress}" ToolTip.Tip="{Binding SessionAddress}"
-                 TextTrimming="CharacterEllipsis"
-                 IsVisible="{Binding SessionAddress, Converter={x:Static StringConverters.IsNotNullOrEmpty}}" />
-
-      <TextBlock Grid.Column="0" Classes="mono" FontSize="12.5"
-                 Foreground="{StaticResource TextFaint}" VerticalAlignment="Center"
-                 Text="{Binding #Root.EmptyText}" TextTrimming="CharacterEllipsis"
-                 IsVisible="{Binding SessionAddress, Converter={x:Static StringConverters.IsNullOrEmpty}}" />
-
-      <Button Grid.Column="1" Classes="headerghost"
-              Content="{Binding #Root.OpenLabel}"
-              Command="{Binding #Root.OpenCommand}"
-              CommandParameter="{Binding #Root.OpenCommandParameter}" />
-
-    </Grid>
-  </Border>
-
-</UserControl>
@@ -1,58 +0,0 @@
-using System.Windows.Input;
-using Avalonia;
-using Avalonia.Controls;
-
-namespace DodoSSH.Client.App.Views;
-
-/// <summary>
-/// The v5b session shell's host header: the address, and a ghost button that crosses to the other surface.
-/// See the remark at the top of SessionHeader.axaml.
-/// </summary>
-internal sealed partial class SessionHeader : UserControl
-{
-    /// <summary>What the cross-surface ghost button says — "Open SFTP" or "Open terminal".</summary>
-    internal static readonly StyledProperty<string?> OpenLabelProperty =
-        AvaloniaProperty.Register<SessionHeader, string?>(nameof(OpenLabel));
-
-    /// <summary>What the cross-surface ghost button runs.</summary>
-    /// <remarks>
-    /// The terminal usage binds <c>SelectFilesHostCommand</c> with the selected tab as its parameter; the
-    /// SFTP usage binds <c>OpenTerminalForFilesHostCommand</c>, which needs none — see the remark on both in
-    /// <c>MainWindowViewModel</c> for why the two directions are not symmetrical.
-    /// </remarks>
-    internal static readonly StyledProperty<ICommand?> OpenCommandProperty =
-        AvaloniaProperty.Register<SessionHeader, ICommand?>(nameof(OpenCommand));
-
-    internal static readonly StyledProperty<object?> OpenCommandParameterProperty =
-        AvaloniaProperty.Register<SessionHeader, object?>(nameof(OpenCommandParameter));
-
-    /// <summary>What the header says instead of an address, while no session/host context is active.</summary>
-    internal static readonly StyledProperty<string?> EmptyTextProperty =
-        AvaloniaProperty.Register<SessionHeader, string?>(nameof(EmptyText));
-
-    public SessionHeader() => InitializeComponent();
-
-    internal string? OpenLabel
-    {
-        get => GetValue(OpenLabelProperty);
-        set => SetValue(OpenLabelProperty, value);
-    }
-
-    internal ICommand? OpenCommand
-    {
-        get => GetValue(OpenCommandProperty);
-        set => SetValue(OpenCommandProperty, value);
-    }
-
-    internal object? OpenCommandParameter
-    {
-        get => GetValue(OpenCommandParameterProperty);
-        set => SetValue(OpenCommandParameterProperty, value);
-    }
-
-    internal string? EmptyText
-    {
-        get => GetValue(EmptyTextProperty);
-        set => SetValue(EmptyTextProperty, value);
-    }
-}
@@ -19,70 +19,100 @@
    Every row here is a command the shell already exposes for exactly this purpose — see
    MainWindowViewModel.PinFolderFromSidebarCommand, AddSnippetFromSidebarCommand and InsertSnippetCommand —
    so this control carries no logic of its own beyond the list it draws and the click it forwards.
+
+    ── v5c-4: THE SESSION BLOCK AT THE HEAD, AND THE HEADER ROW THAT IS GONE ─────────────────────────────────
+    The 60-pixel host header that used to sit above the pane on both surfaces has been retired, and its two
+    contents moved up here: the address it printed, and the cross-surface button — "Open SFTP" from a
+    terminal, "Open terminal" from SFTP. Which of the two words it is and which command it runs are resolved
+    by the shell now rather than handed in from the two usage sites; see
+    MainWindowViewModel.SessionCrossSurfaceLabel and OpenOtherSurfaceCommand. The pane keeps that height.
+
+    The address is the fact the header row existed for, so it moves rather than disappears. It sits where the
+    QUICK ACCESS heading used to print the selected tab's short label — that label said less than the address
+    does and would be the same word twice beside it.
+
+    ── AND THE COLUMN CLOSES ────────────────────────────────────────────────────────────────────────────────
+    300 pixels is a lot of a 1180-pixel window to give a list that is often two rows long, so the column
+    folds to a 34-pixel rail carrying the way back. A rail rather than nothing: a panel that vanishes without
+    trace is one people report as lost. Both halves live in this control and swap on
+    MainWindowViewModel.IsSessionSidebarOpen, so MainWindow.axaml's own "Auto" column takes whichever width
+    is showing without knowing anything about the state — and the pane beside it grows into what is freed.
  -->

-  <Border Width="300" Background="{StaticResource Sidebar}"
-          BorderBrush="{StaticResource Border}" BorderThickness="1,0,0,0">
-    <ScrollViewer VerticalScrollBarVisibility="Auto">
-      <StackPanel Spacing="6" Margin="16,20">
+  <Panel>

-        <!-- ============ QUICK ACCESS ============ -->
-        <Grid ColumnDefinitions="*,Auto" Margin="8,0">
-          <TextBlock Grid.Column="0" Classes="label" Text="QUICK ACCESS" FontSize="10" />
-          <TextBlock Grid.Column="1" Classes="mono" FontSize="10"
-                     Foreground="{StaticResource TextGhost}"
-                     Text="{Binding SelectedTab.Label}" TextTrimming="CharacterEllipsis" MaxWidth="130" />
-        </Grid>
+    <!-- ============ THE RAIL, WHEN THE COLUMN IS CLOSED ============ -->
+    <!--
+      Painted and bordered like the open column so the closing reads as the same surface narrowing rather
+      than as one piece of furniture being swapped for another.
+    -->
+    <Border Width="34" Background="{StaticResource Sidebar}"
+            BorderBrush="{StaticResource Border}" BorderThickness="1,0,0,0"
+            IsVisible="{Binding !IsSessionSidebarOpen}">
+      <Button Classes="flat sidebargrip" VerticalAlignment="Top" Margin="0,20,0,0"
+              Command="{Binding ToggleSessionSidebarCommand}"
+              ToolTip.Tip="Show quick access, snips and the way across to the other surface">
+        <TextBlock Text="&#xE5CB;" FontFamily="{StaticResource IconFont}" FontSize="18"
+                   Foreground="{StaticResource TextFaint}"
+                   HorizontalAlignment="Center" VerticalAlignment="Center" />
+      </Button>
+    </Border>

-        <ItemsControl ItemsSource="{Binding ActiveTabPinnedPaths}">
-          <ItemsControl.ItemTemplate>
-            <DataTemplate x:DataType="x:String">
-              <!--
-                A single level of $parent[ItemsControl] reaches the shell directly, the same way the old pin
-                strip's chips did: this ItemsControl's own DataContext is MainWindowViewModel, so one hop up
-                from the path's string DataContext lands on it.
-              -->
-              <Button Classes="sidebarrow"
-                      Command="{Binding $parent[ItemsControl].((vm:MainWindowViewModel)DataContext).OpenPinnedPathCommand}"
-                      CommandParameter="{Binding}"
-                      ToolTip.Tip="{Binding}">
-                <StackPanel Orientation="Horizontal" Spacing="10">
-                  <TextBlock Text="&#xE2C7;" FontFamily="{StaticResource IconFont}" FontSize="15"
-                             Foreground="{StaticResource AccentText}" VerticalAlignment="Center" />
-                  <TextBlock FontFamily="{StaticResource MonoFont}" FontSize="12.5" Text="{Binding}"
-                             TextTrimming="CharacterEllipsis" VerticalAlignment="Center" />
-                </StackPanel>
-              </Button>
-            </DataTemplate>
-          </ItemsControl.ItemTemplate>
-        </ItemsControl>
+    <!-- ============ THE COLUMN ============ -->
+    <Border Width="300" Background="{StaticResource Sidebar}"
+            BorderBrush="{StaticResource Border}" BorderThickness="1,0,0,0"
+            IsVisible="{Binding IsSessionSidebarOpen}">
+      <ScrollViewer VerticalScrollBarVisibility="Auto">
+        <StackPanel Spacing="6" Margin="16,20">

-        <Button Classes="sidebaradd" Command="{Binding PinFolderFromSidebarCommand}"
-                ToolTip.Tip="Opens the active tab's host for editing, at QUICK ACCESS.">
-          <StackPanel Orientation="Horizontal" Spacing="10">
-            <TextBlock Text="&#xE145;" FontFamily="{StaticResource IconFont}" FontSize="14"
-                       VerticalAlignment="Center" />
-            <TextBlock Text="Pin folder" VerticalAlignment="Center" />
-          </StackPanel>
-        </Button>
+          <!-- ============ THE SESSION ============ -->
+          <!--
+            The address, and the button that closes the column. Both on one row, and the address is the
+            trimming one: a long account@host:port is exactly the string that would otherwise push the
+            close button off the edge of a panel whose whole point is that it can be got rid of.
+          -->
+          <Grid ColumnDefinitions="*,Auto" Margin="8,0,0,0">
+            <TextBlock Grid.Column="0" FontFamily="{StaticResource MonoFont}" FontWeight="Bold"
+                       FontSize="12.5" Foreground="{StaticResource AccentText}"
+                       VerticalAlignment="Center" TextTrimming="CharacterEllipsis"
+                       Text="{Binding SessionAddress}" ToolTip.Tip="{Binding SessionAddress}" />
+            <Button Grid.Column="1" Classes="flat sidebargrip"
+                    Command="{Binding ToggleSessionSidebarCommand}"
+                    ToolTip.Tip="Close this column. The terminal takes the width, and the rail it leaves behind brings it back.">
+              <TextBlock Text="&#xE5CC;" FontFamily="{StaticResource IconFont}" FontSize="18"
+                         Foreground="{StaticResource TextFaint}"
+                         HorizontalAlignment="Center" VerticalAlignment="Center" />
+            </Button>
+          </Grid>

-        <!-- ============ SNIPS (the terminal surface only) ============ -->
-        <StackPanel Spacing="6" Margin="0,16,0,0" IsVisible="{Binding #Root.ShowsSnips}">
+          <!--
+            The cross-surface button, stretched across the column rather than sized to its own caption: it
+            is the one action in this panel that is not a list row, and a 90-pixel button floating at the
+            left of a 300-pixel column would read as unfinished.
+          -->
+          <Button Classes="headerghost" HorizontalAlignment="Stretch" Margin="0,4,0,10"
+                  Content="{Binding SessionCrossSurfaceLabel}"
+                  Command="{Binding OpenOtherSurfaceCommand}" />

-          <TextBlock Classes="label" Text="SNIPS" FontSize="10" Margin="8,0" />
+          <!-- ============ QUICK ACCESS ============ -->
+          <TextBlock Classes="label" Text="QUICK ACCESS" FontSize="10" Margin="8,0" />

-          <ItemsControl ItemsSource="{Binding SnippetsScreen.Visible}">
+          <ItemsControl ItemsSource="{Binding ActiveTabPinnedPaths}">
            <ItemsControl.ItemTemplate>
-              <DataTemplate x:DataType="vm:SnippetRowViewModel">
+              <DataTemplate x:DataType="x:String">
+                <!--
+                  A single level of $parent[ItemsControl] reaches the shell directly, the same way the old pin
+                  strip's chips did: this ItemsControl's own DataContext is MainWindowViewModel, so one hop up
+                  from the path's string DataContext lands on it.
+                -->
                <Button Classes="sidebarrow"
-                        Command="{Binding $parent[ItemsControl].((vm:MainWindowViewModel)DataContext).InsertSnippetCommand}"
+                        Command="{Binding $parent[ItemsControl].((vm:MainWindowViewModel)DataContext).OpenPinnedPathCommand}"
                        CommandParameter="{Binding}"
-                        ToolTip.Tip="{Binding Snippet.Command}">
+                        ToolTip.Tip="{Binding}">
                  <StackPanel Orientation="Horizontal" Spacing="10">
-                    <TextBlock Text="{}{ }" FontFamily="{StaticResource MonoFont}" FontWeight="Bold"
-                               FontSize="11" Foreground="{StaticResource AccentText}"
-                               VerticalAlignment="Center" />
-                    <TextBlock FontFamily="{StaticResource MonoFont}" FontSize="12.5" Text="{Binding Label}"
+                    <TextBlock Text="&#xE2C7;" FontFamily="{StaticResource IconFont}" FontSize="15"
+                               Foreground="{StaticResource AccentText}" VerticalAlignment="Center" />
+                    <TextBlock FontFamily="{StaticResource MonoFont}" FontSize="12.5" Text="{Binding}"
                               TextTrimming="CharacterEllipsis" VerticalAlignment="Center" />
                  </StackPanel>
                </Button>
@@ -90,19 +120,54 @@
            </ItemsControl.ItemTemplate>
          </ItemsControl>

-          <Button Classes="sidebaradd" Command="{Binding AddSnippetFromSidebarCommand}"
-                  ToolTip.Tip="Opens the snippet editor.">
+          <Button Classes="sidebaradd" Command="{Binding PinFolderFromSidebarCommand}"
+                  ToolTip.Tip="Opens the active tab's host for editing, at QUICK ACCESS.">
            <StackPanel Orientation="Horizontal" Spacing="10">
              <TextBlock Text="&#xE145;" FontFamily="{StaticResource IconFont}" FontSize="14"
                         VerticalAlignment="Center" />
-              <TextBlock Text="Add Snip" VerticalAlignment="Center" />
+              <TextBlock Text="Pin folder" VerticalAlignment="Center" />
            </StackPanel>
          </Button>

-        </StackPanel>
+          <!-- ============ SNIPS (the terminal surface only) ============ -->
+          <StackPanel Spacing="6" Margin="0,16,0,0" IsVisible="{Binding #Root.ShowsSnips}">

-      </StackPanel>
-    </ScrollViewer>
-  </Border>
+            <TextBlock Classes="label" Text="SNIPS" FontSize="10" Margin="8,0" />
+
+            <ItemsControl ItemsSource="{Binding SnippetsScreen.Visible}">
+              <ItemsControl.ItemTemplate>
+                <DataTemplate x:DataType="vm:SnippetRowViewModel">
+                  <Button Classes="sidebarrow"
+                          Command="{Binding $parent[ItemsControl].((vm:MainWindowViewModel)DataContext).InsertSnippetCommand}"
+                          CommandParameter="{Binding}"
+                          ToolTip.Tip="{Binding Snippet.Command}">
+                    <StackPanel Orientation="Horizontal" Spacing="10">
+                      <TextBlock Text="{}{ }" FontFamily="{StaticResource MonoFont}" FontWeight="Bold"
+                                 FontSize="11" Foreground="{StaticResource AccentText}"
+                                 VerticalAlignment="Center" />
+                      <TextBlock FontFamily="{StaticResource MonoFont}" FontSize="12.5" Text="{Binding Label}"
+                                 TextTrimming="CharacterEllipsis" VerticalAlignment="Center" />
+                    </StackPanel>
+                  </Button>
+                </DataTemplate>
+              </ItemsControl.ItemTemplate>
+            </ItemsControl>
+
+            <Button Classes="sidebaradd" Command="{Binding AddSnippetFromSidebarCommand}"
+                    ToolTip.Tip="Opens the snippet editor.">
+              <StackPanel Orientation="Horizontal" Spacing="10">
+                <TextBlock Text="&#xE145;" FontFamily="{StaticResource IconFont}" FontSize="14"
+                           VerticalAlignment="Center" />
+                <TextBlock Text="Add Snip" VerticalAlignment="Center" />
+              </StackPanel>
+            </Button>
+
+          </StackPanel>
+
+        </StackPanel>
+      </ScrollViewer>
+    </Border>
+
+  </Panel>

 </UserControl>
@@ -60,12 +60,23 @@
                      ToolTip.Tip="{Binding Address}">
                <StackPanel Orientation="Horizontal" Spacing="9" VerticalAlignment="Center">
                  <!--
-                    Two states, as the strip's own dots always were: green while the shell behind this tab is
-                    running, grey while it is connecting and once it has ended. The design's third, amber,
-                    state has no meaning here — nothing in this application checks whether a host is merely
-                    reachable — so it is not drawn; see design-notes/v5b-fidelity-notes.md.
+                    Three states now, where there were two. Green while the shell behind this tab is running
+                    and grey once it has ended, as the strip's dots always were — and amber while it is
+                    connecting, which used to be grey as well.
+
+                    The design's amber had no meaning here while nothing in this application knew how far a
+                    connection had got; that changed with the step list, and the note this comment used to
+                    carry — that amber is for a host merely reachable, so it is not drawn — is answered
+                    rather than ignored. It is not being reachable that is amber, it is being underway. See
+                    ConnectingCard.axaml, whose track and running step are the same colour for the same
+                    reason, and design-notes/v5b-fidelity-notes.md for the state this is not.
+
+                    Worth the third colour because the two it replaces were the same one: a tab still
+                    dialling and a tab whose shell has exited both drew grey, which are the two states in
+                    this strip with the least in common — one is worth waiting for and the other is over.
                  -->
                  <Ellipse Classes="dot" Width="8" Height="8" Classes.live="{Binding IsLive}"
+                           Classes.connecting="{Binding IsConnecting}"
                           VerticalAlignment="Center" />
                  <TextBlock Text="{Binding Label}" VerticalAlignment="Center" />

@@ -9,8 +9,8 @@
    the same 53px bar: "Back to application" on the left, in place of the wordmark and the search box, and
    the same three window-control glyphs on the right TitleBar.axaml already draws.

-    A separate control rather than a variant of TitleBar itself, on the same reasoning SessionHeader and
-    SessionStatusBar are their own files: nothing here can be measured by a test that hosts the real window,
+    A separate control rather than a variant of TitleBar itself, on the same reasoning SessionStatusBar and
+    SessionSidebar are their own files: nothing here can be measured by a test that hosts the real window,
    and a control that is either "the wordmark bar" or "the settings bar" depending on a bound flag would be
    two controls wearing one name. The dragging, maximising and closing logic is duplicated from TitleBar's
    own code-behind rather than shared through a base class — four short handlers, and the day one of the two
@@ -79,8 +79,16 @@
            -->
            <TextBlock Grid.Column="1" Text="Search or connect…" FontSize="13.5" Margin="10,0"
                       Foreground="{StaticResource TextGhost}" VerticalAlignment="Center" />
-            <!-- CTRL K, not the design's ⌘K — see the remark at the top of this file. -->
-            <Border Grid.Column="2" Width="34" Height="18" CornerRadius="5"
+            <!--
+              CTRL K, not the design's ⌘K — see the remark at the top of this file.
+
+              ◆ PADDED RATHER THAN 34 WIDE, which is the design's own width for a chip reading ⌘K: two
+              glyphs, where the substitution this bar makes is six characters and a space. At 10.5 mono
+              that run is wider than 34, so the chip clipped it — "CTRL" with the K cut in half. MinWidth
+              keeps the design's footprint for the day this face has a ⌘ to draw, and the padding is what
+              the longer label actually needs.
+            -->
+            <Border Grid.Column="2" MinWidth="34" Height="18" CornerRadius="5" Padding="7,0"
                    Background="{StaticResource KbdChip}"
                    HorizontalAlignment="Center" VerticalAlignment="Center">
              <TextBlock Classes="mono" Text="CTRL K" FontSize="10.5" FontWeight="Medium"
@@ -33,6 +33,43 @@
    layer has not got. See docs/design-import-gaps.md.
  -->

+  <!--
+    ══ THE TWO LISTINGS' COLUMNS ═════════════════════════════════════════════════════════════════════════
+    ◆ They were fixed pixel widths, and fixed was wrong at both ends of the range this screen actually gets.
+
+    The numbers — 20/*/60/56 here and 20/*/56/52/48 across the arrow column — were chosen against the 204
+    pixels the session shell's own QUICK ACCESS sidebar leaves a pane at the window's minimum. Measured,
+    they were wrong in both directions at once:
+
+      · MODIFIED prints "2026-08-21 11:36", which needs 116 pixels, and never had more than 48. So the
+        column was truncated at every width this screen has ever been drawn at — a maximised window showed
+        "2026-08" beside a NAME column with four hundred empty pixels in it. PERMS needs 60 for a
+        ten-character mode and had 48; SIZE needs 58 for "999.9 GB" and had 56.
+      · At 204 the remote pane's NAME column measured **zero pixels wide**. Twenty for the glyph plus
+        56+52+48 for the numbers is 176 of the 180 a row has, so the file names — the one column a file
+        browser exists to show — were not drawn at all.
+
+    Star columns with a MaxWidth fix both, because the cap is what makes "share the width" mean the right
+    thing at each end. Wide, the three numeric columns stop growing at what their own text needs and NAME
+    keeps every remaining pixel. Narrow, nothing has a MinWidth to overflow with, so all four give ground
+    together and NAME — weighted heaviest — keeps enough to read a name by.
+
+    MODIFIED carries the extra weight (1.6) so that it reaches its cap first: it is the widest content and
+    the column somebody is most often actually reading. The local pane's NAME is 3* against the remote's 2*,
+    which is the remote's PERMS weight folded into it — that is what makes SIZE and MODIFIED come out the
+    same width on both sides of the arrow column, so the same amount of a timestamp is visible in each. See
+    Timestamps.Format for why both panes write one the same way in the first place; a shared format read at
+    two different widths would have made that argument for nothing.
+
+    ◆ FOUR COPIES OF THIS, and they have to stay in step: a heading row and a row template per pane. Avalonia
+    cannot share one ColumnDefinitions instance between two Grids — each mutates its own computed sizes —
+    and SharedSizeGroup only applies to Auto columns. What catches a copy that drifts is measurement rather
+    than discipline: ScreenLayoutTests holds every cell against the width its own text needs
+    (TheListingColumnsShowTheirContentInFullWhenThereIsRoom), the headings against each other
+    (TheListingHeadingsDoNotRunIntoEachOther), and NAME against zero at the narrowest budget
+    (TheNameColumnSurvivesTheNarrowestBudget).
+  -->
+
  <UserControl.Styles>
    <!--
      ── v5b ─────────────────────────────────────────────────────────────────────────────────────────────
@@ -259,10 +296,18 @@
          the row template below for why the whole column set was chosen against 204 pixels rather than the
          design's own 1920-pixel canvas.
        -->
-        <Grid Grid.Row="2" ColumnDefinitions="20,*,60,56" Margin="0,2,10,4">
+        <Grid Grid.Row="2" Margin="0,2,10,4">
+          <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="20" />
+            <ColumnDefinition Width="3*" />
+            <ColumnDefinition Width="*" MaxWidth="66" />
+            <ColumnDefinition Width="1.6*" MaxWidth="124" />
+          </Grid.ColumnDefinitions>
          <TextBlock Grid.Column="1" Classes="label" Text="NAME" FontSize="9.5" Margin="8,0,8,0" />
-          <TextBlock Grid.Column="2" Classes="label" Text="SIZE" FontSize="9.5" HorizontalAlignment="Right" />
-          <TextBlock Grid.Column="3" Classes="label" Text="MODIFIED" FontSize="9.5" HorizontalAlignment="Right" />
+          <TextBlock Grid.Column="2" Classes="label" Text="SIZE" FontSize="9.5" Margin="8,0,0,0"
+                     HorizontalAlignment="Right" TextTrimming="CharacterEllipsis" />
+          <TextBlock Grid.Column="3" Classes="label" Text="MODIFIED" FontSize="9.5" Margin="8,0,0,0"
+                     HorizontalAlignment="Right" TextTrimming="CharacterEllipsis" />
        </Grid>

        <!--
@@ -274,13 +319,19 @@
                 SelectedItem="{Binding SelectedLocalEntry}">
          <ListBox.ItemTemplate>
            <DataTemplate x:DataType="vm:LocalEntryRowViewModel">
-              <Grid ColumnDefinitions="20,*,60,56" Height="38" Margin="14,0,10,0">
+              <Grid Height="38" Margin="14,0,10,0">
+                <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="20" />
+                  <ColumnDefinition Width="3*" />
+                  <ColumnDefinition Width="*" MaxWidth="66" />
+                  <ColumnDefinition Width="1.6*" MaxWidth="124" />
+                </Grid.ColumnDefinitions>
                <TextBlock Grid.Column="0" Classes="entryicon" Text="{Binding IconGlyph}" />
                <TextBlock Grid.Column="1" Classes="mono entry" Classes.dir="{Binding IsNavigable}"
                           Text="{Binding Name}" FontSize="13.5"
                           Margin="10,0,8,0" VerticalAlignment="Center" TextTrimming="CharacterEllipsis" />
                <TextBlock Grid.Column="2" Classes="mono entrysize" Text="{Binding Size}" FontSize="12"
-                           HorizontalAlignment="Right" VerticalAlignment="Center" />
+                           Margin="8,0,0,0" HorizontalAlignment="Right" VerticalAlignment="Center" />
                <TextBlock Grid.Column="3" Classes="mono entrydate" Text="{Binding Modified}" FontSize="12"
                           Margin="8,0,0,0" HorizontalAlignment="Right" VerticalAlignment="Center" />
              </Grid>
@@ -327,10 +378,12 @@

      <!-- ==== The host ==== -->
      <!--
-        Six rows rather than five: the connection's own strip is the new one, and it is inside this pane
-        rather than above both because it is about this pane and nothing else.
+        Seven rows. Two of them are furniture over a listing rather than part of it: the connection's own
+        strip, and the row of things that can be done to whichever row is chosen. Both are inside this pane
+        rather than above both panes because both are about this one and nothing else. The two questions —
+        deleting, and renaming or moving — share a single row, since only one of the two is ever on screen.
      -->
-      <Grid Grid.Column="2" x:Name="RemotePane" RowDefinitions="Auto,Auto,Auto,Auto,Auto,*"
+      <Grid Grid.Column="2" x:Name="RemotePane" RowDefinitions="Auto,Auto,Auto,Auto,Auto,Auto,*"
            DragDrop.AllowDrop="True">

        <!--
@@ -344,25 +397,48 @@
          distinct glyphs; see that pane's own remark on why the pair differs without the actions differing.
        -->
        <!--
-          The path is alone in the star column for the reason the local pane's header remark spells out:
-          TextTrimming needs the finite width only a star column gives it, and this is the pane where the
-          long path is not even unusual — it is any host with a deep directory tree.
+          ◆ THE PATH IS TYPED HERE, and that is what the star column is now holding.
+
+          It was a TextBlock printing where the pane was. A breadcrumb only reaches what is under the
+          directory already listed, so crossing a host's filesystem was a walk to the common ancestor and
+          back down — a click and a round trip a level — and a path somebody already knew could not be
+          entered at all. Enter goes; Escape puts back what the pane is really showing. See
+          TransfersViewModel.RemotePathDraft for why the box holds its own value rather than RemotePath
+          itself, and SftpPath.Resolve for what an entry that is not absolute means.
+
+          Still alone in the star column, for the reason the local pane's header remark spells out: this box
+          has to be bounded, and an Auto column beside a StackPanel would measure it at its content's width
+          and push the buttons past the pane's edge.
+
+          DELETE has left this row. It acts on the selected row rather than on the pane, and it is one of
+          three that do now — see the item row below, which is where the three of them are together and
+          where there is room for three rather than for one.
        -->
        <Border Grid.Row="0" Padding="0,0,0,10" BorderThickness="0">
          <Grid ColumnDefinitions="Auto,*,Auto">
            <StackPanel Grid.Column="0" Orientation="Horizontal" Spacing="12" VerticalAlignment="Center"
-                        Margin="0,0,12,0">
+                        Margin="0,0,8,0">
              <TextBlock Classes="label" FontSize="10" Text="HOST" VerticalAlignment="Center"
                         IsVisible="{Binding ShowsHostPicker}" />
              <TextBlock Classes="label" FontSize="10" Text="BUCKET" VerticalAlignment="Center"
                         IsVisible="{Binding ShowsBucketPicker}" />
            </StackPanel>
-            <TextBlock Grid.Column="1" Classes="mono" FontSize="13.5" FontWeight="Medium"
-                       Foreground="{StaticResource TextDim}" VerticalAlignment="Center"
-                       HorizontalAlignment="Left"
-                       Text="{Binding RemotePath}" TextTrimming="CharacterEllipsis"
-                       ToolTip.Tip="{Binding RemotePath}" />
-            <StackPanel Grid.Column="2" Orientation="Horizontal" Spacing="4" Margin="12,0,0,0">
+            <TextBox Grid.Column="1" Classes="pathbox" VerticalAlignment="Center"
+                     Text="{Binding RemotePathDraft}" IsEnabled="{Binding IsConnected}"
+                     PlaceholderText="path"
+                     ToolTip.Tip="Type a path and press Enter. A relative path is taken from here; ~ is the account's home directory.">
+              <!--
+                One word, because the only time this placeholder shows is on a pane with nothing connected,
+                where the box is disabled and the invitation below is doing the explaining. "/path/to/
+                somewhere" needs 146 pixels and had 91 at the session shell's narrowest, so it drew as a
+                path cut off mid-segment. What the box is for is in the tooltip, where there is room for it.
+              -->
+              <TextBox.KeyBindings>
+                <KeyBinding Gesture="Enter" Command="{Binding GoToTypedRemotePathCommand}" />
+                <KeyBinding Gesture="Escape" Command="{Binding RevertTypedRemotePathCommand}" />
+              </TextBox.KeyBindings>
+            </TextBox>
+            <StackPanel Grid.Column="2" Orientation="Horizontal" Spacing="4" Margin="8,0,0,0">
              <Button Classes="paneicon" Command="{Binding RemoteUpCommand}"
                      IsEnabled="{Binding IsConnected}" ToolTip.Tip="Up one directory">
                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="16" Text="&#xE5DB;" />
@@ -371,10 +447,6 @@
                      IsEnabled="{Binding IsConnected}" ToolTip.Tip="Refresh">
                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="16" Text="&#xE5D5;" />
              </Button>
-              <Button Classes="paneicon danger" Command="{Binding DeleteRemoteCommand}"
-                      IsEnabled="{Binding CanDeleteRemote}" ToolTip.Tip="Delete on the host">
-                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="15" Text="&#xE872;" />
-              </Button>
            </StackPanel>
          </Grid>
        </Border>
@@ -382,8 +454,9 @@
        <!--
          ◆ WHAT IS OPEN, AND WHAT CLOSES IT. Only while something is.

-          v5b drops the account-at-host chip this row used to carry beside DISCONNECT: SessionHeader now
-          prints the very same address above this whole screen — see MainWindowViewModel.SessionAddress,
+          v5b drops the account-at-host chip this row used to carry beside DISCONNECT: the session shell
+          prints the very same address beside this screen — in the sidebar's own session block since v5c-4
+          retired the header row that printed it above — see MainWindowViewModel.SessionAddress,
          which already reads Transfers.ConnectedTo on the SFTP surface — and repeating it here stopped being
          information and started being the thing squeezing DISCONNECT off the edge. At the session shell's
          own narrower budget this pane is 204 pixels wide once QUICK ACCESS is showing beside it, where the
@@ -401,9 +474,53 @@
        </Border>

        <!--
-          The question DELETE asks. Under the button rather than over the pane, so the row it is about is
-          still on screen and still selected while it is being answered — and it names the full path rather
-          than the file, because a name is the half that does not identify anything.
+          ◆ WHAT CAN BE DONE TO THE ROW THAT IS CHOSEN. Only while something is connected.
+
+          Three buttons in one place, which is the point. DELETE used to sit alone in the pane header beside
+          UP and REFRESH — two things that move the pane and one that destroys a file, in one row — and
+          there was no rename and no move at all, so a file that had landed under the wrong name could only
+          be put right by deleting it and sending it again. These three act on the selection, so they belong
+          together and away from the two that act on the pane.
+
+          The name beside them is the row they are about, ellipsized. It says which row rather than which
+          path: the listing directly underneath has that row highlighted, so a full path here would be
+          repeating what the selection is already showing. The forms the buttons open do print the path,
+          because that is the moment something is committed rather than merely looked at.
+
+          The row goes while one of the three questions is up rather than sitting there greyed out, and so
+          does the breadcrumb below it — see ShowsRemoteItemActions. The form that opens is the answer to
+          what these buttons asked, and inside the session shell this pane is 204 pixels wide: the height
+          goes to the question or to the buttons that raised it, not to both.
+        -->
+        <Border Grid.Row="2" Padding="12,5" BorderBrush="{StaticResource BorderSubtle}"
+                BorderThickness="0,0,0,1" IsVisible="{Binding ShowsRemoteItemActions}">
+          <Grid ColumnDefinitions="*,Auto">
+            <TextBlock Grid.Column="0" Classes="mono" FontSize="11.5" VerticalAlignment="Center"
+                       Foreground="{StaticResource TextFaint}" TextTrimming="CharacterEllipsis"
+                       Text="{Binding SelectedRemoteName}" />
+            <StackPanel Grid.Column="1" Orientation="Horizontal" Spacing="4" Margin="8,0,0,0">
+              <Button Classes="paneicon" Command="{Binding RenameRemoteCommand}"
+                      IsEnabled="{Binding CanRenameRemote}" ToolTip.Tip="Rename on the host">
+                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="15" Text="&#xE9AD;" />
+              </Button>
+              <Button Classes="paneicon" Command="{Binding MoveRemoteCommand}"
+                      IsEnabled="{Binding CanMoveRemote}" ToolTip.Tip="Move to another directory">
+                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="15" Text="&#xE675;" />
+              </Button>
+              <Button Classes="paneicon danger" Command="{Binding DeleteRemoteCommand}"
+                      IsEnabled="{Binding CanDeleteRemote}" ToolTip.Tip="Delete on the host">
+                <TextBlock FontFamily="{StaticResource IconFont}" FontSize="15" Text="&#xE872;" />
+              </Button>
+            </StackPanel>
+          </Grid>
+        </Border>
+
+        <!--
+          The question DELETE asks. It names the full path rather than the file, because a name is the half
+          that does not identify anything — and that is now the whole of how the question says which row it
+          is about: at the session shell's own 204-pixel width there is no height left for a listing under
+          it, so "the row is still on screen and still selected" is no longer true and the path in the card
+          is what carries the identity. See the rename form below, which is measured in the same shape.

          This is the strongest warning on any of these screens, and deliberately: everything else this
          application deletes is a tombstone against a copy the server still has, and a file on somebody's
@@ -414,7 +531,7 @@
          CANCEL side by side want closer to 220, so at the narrow width they wrap onto their own line
          instead of one of them going off the edge, which the WrapPanel achieves for free.
        -->
-        <Border Grid.Row="2" Padding="12,10" Background="{StaticResource DangerWash}"
+        <Border Grid.Row="3" Padding="12,10" Background="{StaticResource DangerWash}"
                BorderBrush="{StaticResource DangerSoft}" BorderThickness="0,0,0,1"
                IsVisible="{Binding IsConfirmingRemoteDeletion}">
          <StackPanel Spacing="7">
@@ -434,7 +551,65 @@
          </StackPanel>
        </Border>

-        <Grid Grid.Row="3" ColumnDefinitions="*,Auto" Margin="12,6,12,4">
+        <!--
+          ◆ RENAME AND MOVE, in the row the deletion question uses and never at the same time as it.
+
+          One form for both, because they differ only in what the box starts out holding and in the words
+          around it — see RemoteMoveRequest, where both sets are chosen. It shares this Grid row with
+          the deletion card above: the three questions are mutually exclusive by construction, each one's
+          own opening clearing the others, so a row of its own would be a row that is empty whenever this
+          one is not.
+
+          It is not painted in the deletion card's danger colours, and that is deliberate rather than an
+          oversight. A rename is undone by renaming back; the deletion beside it is the one thing this
+          application does that nothing can walk back, and spending the same red on both would make the red
+          stop meaning anything.
+
+          Enter commits from inside the box, which is where the hands already are once an answer has been
+          typed.
+
+          ◆ IT TAKES THE WHOLE PANE at the session shell's own 204-pixel width, and that is measured rather
+          than hoped: the listing's star row is squeezed to nothing while either question is open, exactly
+          as the deletion card above already squeezed it. There is no room for a form and a listing in 336
+          pixels, and the form carries the full path precisely so the row underneath does not have to be
+          visible for the question to be about something identifiable. That is why the item row and the
+          breadcrumb step aside instead — the height they free is what keeps the form itself un-clipped,
+          which is what ScreenLayoutTests measures.
+        -->
+        <Border Grid.Row="3" Padding="12,10" Background="{StaticResource Raised}"
+                BorderBrush="{StaticResource BorderSubtle}" BorderThickness="0,0,0,1"
+                IsVisible="{Binding IsMovingRemote}">
+          <StackPanel Spacing="7">
+            <TextBlock Classes="heading" FontSize="14" TextWrapping="Wrap"
+                       Text="{Binding PendingRemoteMove.Question}" />
+            <SelectableTextBlock Classes="mono" FontSize="11.5" TextWrapping="Wrap"
+                                 Foreground="{StaticResource TextFaint}"
+                                 Text="{Binding PendingRemoteMove.FullPath}" />
+            <TextBox Text="{Binding RemoteMoveTarget}"
+                     PlaceholderText="{Binding PendingRemoteMove.FieldHint}">
+              <TextBox.KeyBindings>
+                <KeyBinding Gesture="Enter" Command="{Binding ConfirmMoveRemoteCommand}" />
+                <KeyBinding Gesture="Escape" Command="{Binding CancelMoveRemoteCommand}" />
+              </TextBox.KeyBindings>
+            </TextBox>
+            <TextBlock Classes="hint" FontSize="11.5" TextWrapping="Wrap"
+                       Text="{Binding PendingRemoteMove.Note}" />
+            <WrapPanel>
+              <Button Classes="accent" Content="{Binding PendingRemoteMove.ConfirmLabel}" Margin="0,0,8,4"
+                      Command="{Binding ConfirmMoveRemoteCommand}" IsEnabled="{Binding !IsBusy}" />
+              <Button Classes="ghost" Content="CANCEL" Margin="0,0,0,4"
+                      Command="{Binding CancelMoveRemoteCommand}" />
+            </WrapPanel>
+          </StackPanel>
+        </Border>
+
+        <!--
+          Away while a question is up, for the reason the item row above states: the trail is where the pane
+          is and MKDIR makes a directory, and neither is what somebody answering a question about one row
+          is doing.
+        -->
+        <Grid Grid.Row="4" ColumnDefinitions="*,Auto" Margin="12,6,12,4"
+              IsVisible="{Binding !IsAskingAboutRemoteEntry}">
          <ItemsControl Grid.Column="0" ItemsSource="{Binding RemoteTrail}" VerticalAlignment="Center">
            <ItemsControl.ItemsPanel>
              <ItemsPanelTemplate>
@@ -466,10 +641,16 @@
            is showing, 140 plus MKDIR plus the spacing between them ran past the pane's own edge. Still wide
            enough for a real directory name to be typed and read back, which is what this box is for; a
            name that outgrows it scrolls inside the box the way every TextBox already does.
+
+            ◆ The placeholder says "directory" rather than "new directory", which is what it said until it
+            was measured: the longer text needs 101 pixels inside a box that has 74, so it drew as "new
+            directo" — a placeholder cut off mid-word, which reads as a rendering fault rather than as a
+            hint. MKDIR is right beside it and carries the "new" half already. The path box in the header
+            above lost the same argument and for the same reason; see its own PlaceholderText.
          -->
          <StackPanel Grid.Column="1" Orientation="Horizontal" Spacing="6"
                      IsVisible="{Binding IsConnected}">
-            <TextBox Width="90" Text="{Binding NewRemoteFolder}" PlaceholderText="new directory" />
+            <TextBox Width="90" Text="{Binding NewRemoteFolder}" PlaceholderText="directory" />
            <Button Classes="ghost" Content="MKDIR" Command="{Binding CreateRemoteFolderCommand}" />
          </StackPanel>
        </Grid>
@@ -479,25 +660,42 @@
          48 pixels rather than the drawer's own wider habit, and SIZE/MODIFIED shrink to match the local
          pane's narrower numbers. See the local pane's own remark on why 204 rather than the design's 1920.
        -->
-        <Grid Grid.Row="4" ColumnDefinitions="20,*,56,52,48" Margin="0,2,10,4">
+        <Grid Grid.Row="5" Margin="0,2,10,4">
+          <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="20" />
+            <ColumnDefinition Width="2*" />
+            <ColumnDefinition Width="*" MaxWidth="66" />
+            <ColumnDefinition Width="1.6*" MaxWidth="124" />
+            <ColumnDefinition Width="*" MaxWidth="66" />
+          </Grid.ColumnDefinitions>
          <TextBlock Grid.Column="1" Classes="label" Text="NAME" FontSize="9.5" Margin="8,0,8,0" />
-          <TextBlock Grid.Column="2" Classes="label" Text="SIZE" FontSize="9.5" HorizontalAlignment="Right" />
-          <TextBlock Grid.Column="3" Classes="label" Text="MODIFIED" FontSize="9.5" HorizontalAlignment="Right" />
-          <TextBlock Grid.Column="4" Classes="label" Text="PERMS" FontSize="9.5" HorizontalAlignment="Right" />
+          <TextBlock Grid.Column="2" Classes="label" Text="SIZE" FontSize="9.5" Margin="8,0,0,0"
+                     HorizontalAlignment="Right" TextTrimming="CharacterEllipsis" />
+          <TextBlock Grid.Column="3" Classes="label" Text="MODIFIED" FontSize="9.5" Margin="8,0,0,0"
+                     HorizontalAlignment="Right" TextTrimming="CharacterEllipsis" />
+          <TextBlock Grid.Column="4" Classes="label" Text="PERMS" FontSize="9.5" Margin="6,0,0,0"
+                     HorizontalAlignment="Right" TextTrimming="CharacterEllipsis" />
        </Grid>

-        <ListBox Grid.Row="5" x:Name="RemoteList" Classes="filerows" ItemsSource="{Binding RemoteEntries}"
+        <ListBox Grid.Row="6" x:Name="RemoteList" Classes="filerows" ItemsSource="{Binding RemoteEntries}"
                 SelectedItem="{Binding SelectedRemoteEntry}">
          <ListBox.ItemTemplate>
            <DataTemplate x:DataType="vm:RemoteEntryRowViewModel">
-              <Grid ColumnDefinitions="20,*,56,52,48" Height="38" Margin="14,0,10,0">
+              <Grid Height="38" Margin="14,0,10,0">
+                <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="20" />
+                  <ColumnDefinition Width="2*" />
+                  <ColumnDefinition Width="*" MaxWidth="66" />
+                  <ColumnDefinition Width="1.6*" MaxWidth="124" />
+                  <ColumnDefinition Width="*" MaxWidth="66" />
+                </Grid.ColumnDefinitions>
                <TextBlock Grid.Column="0" Classes="entryicon" Text="{Binding IconGlyph}" />
                <TextBlock Grid.Column="1" Classes="mono entry" Classes.dir="{Binding IsNavigable}"
                           Classes.exec="{Binding IsExecutable}"
                           Text="{Binding Name}" FontSize="13.5"
                           Margin="10,0,8,0" VerticalAlignment="Center" TextTrimming="CharacterEllipsis" />
                <TextBlock Grid.Column="2" Classes="mono entrysize" Text="{Binding Size}" FontSize="12"
-                           HorizontalAlignment="Right" VerticalAlignment="Center" />
+                           Margin="8,0,0,0" HorizontalAlignment="Right" VerticalAlignment="Center" />
                <TextBlock Grid.Column="3" Classes="mono entrydate" Text="{Binding Modified}" FontSize="12"
                           Margin="8,0,0,0" HorizontalAlignment="Right" VerticalAlignment="Center" />
                <TextBlock Grid.Column="4" Classes="mono perms" Classes.loose="{Binding IsWorldWritable}"
@@ -512,7 +710,7 @@
          A directory with nothing in it. It no longer has to say anything about not being connected: that
          state is the invitation below, which covers this pane whole.
        -->
-        <TextBlock Grid.Row="5" Classes="hint" FontSize="12" Margin="24" MaxWidth="300"
+        <TextBlock Grid.Row="6" Classes="hint" FontSize="12" Margin="24" MaxWidth="300"
                   HorizontalAlignment="Center" VerticalAlignment="Center" TextAlignment="Center"
                   Text="Nothing in this directory." IsVisible="{Binding !HasRemoteEntries}" />

@@ -534,7 +732,7 @@
          the picker arrives, so the tall shape is the form rather than form-plus-prose, and neither shape
          reaches the floor. Anything added here has to hold that; the layout suite measures both.
        -->
-        <Border Grid.Row="1" Grid.RowSpan="5" Background="{StaticResource Canvas}"
+        <Border Grid.Row="1" Grid.RowSpan="6" Background="{StaticResource Canvas}"
                IsVisible="{Binding !IsConnected}">
          <StackPanel Spacing="10" Margin="20" MaxWidth="320"
                      HorizontalAlignment="Center" VerticalAlignment="Center">
@@ -678,11 +876,11 @@
          window that has stopped answering, and the answer arriving after the drop is the answer arriving
          too late. See the local pane for why neither may hit-test.
        -->
-        <Border Grid.Row="0" Grid.RowSpan="6" IsHitTestVisible="False"
+        <Border Grid.Row="0" Grid.RowSpan="7" IsHitTestVisible="False"
                Background="{StaticResource AccentWash}" BorderBrush="{StaticResource Accent}"
                BorderThickness="2" IsVisible="{Binding IsRemoteDropTarget}" />

-        <Border Grid.Row="0" Grid.RowSpan="6" IsHitTestVisible="False"
+        <Border Grid.Row="0" Grid.RowSpan="7" IsHitTestVisible="False"
                Background="{StaticResource DangerWash}" BorderBrush="{StaticResource DangerSoft}"
                BorderThickness="2" IsVisible="{Binding IsRemoteDropRefused}">
          <TextBlock Classes="hint" Text="Connect to a host first." FontSize="12"
@@ -405,7 +405,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -465,9 +465,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -567,11 +567,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -55,14 +55,14 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -81,11 +81,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -23,9 +23,13 @@ namespace DodoSSH.Client.Session;
 /// <param name="AutomaticUpdateChecks">
 /// Whether this machine looks for a newer build on its own. See the remarks on the property.
 /// </param>
+/// <param name="SessionSidebarOpen">
+/// Whether the session shell's QUICK ACCESS sidebar is drawn. See the remarks on the property.
+/// </param>
 public sealed record ClientSettings(
    int TerminalFontSize = ClientSettings.DefaultTerminalFontSize,
-    bool AutomaticUpdateChecks = true)
+    bool AutomaticUpdateChecks = true,
+    bool SessionSidebarOpen = true)
 {
    /*
      A positional record, and the defaults live on the parameters rather than on property initializers.
@@ -102,6 +106,24 @@ public sealed record ClientSettings(
      warns against.
    */

+    /*
+      SessionSidebarOpen: why closing the sidebar is remembered, and why it is remembered here.
+
+      On by default, because the sidebar is where a session's pins, its snips and the way across to the
+      other surface live — a first launch that hid all three would be hiding the feature rather than
+      offering to.
+
+      Remembered at all because closing it is a choice about how much of a 1180-pixel window a terminal
+      gets, and a choice that has to be made again on every launch is one the application is not really
+      offering. It belongs in this file rather than in the vault for the same reason the font size does:
+      it is a fact about this screen, not about this keychain, and following somebody from a 27-inch
+      monitor onto a laptop would be a preference nobody asked for.
+
+      Not per-surface and not per-tab. The sidebar is one control drawn on two screens — see
+      SessionSidebar.axaml — and a window where it is open on SFTP and closed on the terminal is a
+      window that appears to lose it at random.
+    */
+
    /// <summary>Brings a value inside the range this type will store.</summary>
    public static int ClampTerminalFontSize(int pixels) =>
        Math.Clamp(pixels, MinimumTerminalFontSize, MaximumTerminalFontSize);
@@ -148,7 +148,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -187,9 +187,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -289,11 +289,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -328,6 +328,9 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
    /// </remarks>
    private readonly Func<string, Task>? copyToClipboard;

+    /// <inheritdoc cref="MainWindowViewModel(ClientPaths, ClientCacheFactory, TerminalWorkspace, VaultKnownHostStore, IDeviceKeyStore, SignInHandler, TimeProvider, ISftpSessionFactory, Argon2Profile?, ResumeHandler?, Func{string, Task}?, string?, IUpdateChannel?, Action{Action}?)" path="/param[@name='post']" />
+    private readonly Action<Action> post;
+
    /// <remarks>
    /// Created once and kept for the life of the process, like <see cref="workspace"/> and for the same
    /// reason: file transfer opens its own authenticated connection, and locking the vault must not destroy
@@ -470,6 +473,19 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
    /// absence of a line rather than by a line somebody has to remember to keep a no-op; and ADR 0011 settles
    /// the Android head's distribution separately, so it must never acquire one by accident.
    /// </param>
+    /// <param name="post">
+    /// Runs an action on the thread this shell's view models are read from. Defaults to the UI thread's
+    /// dispatcher, which is the answer in every real head.
+    /// <para>
+    /// A delegate rather than <c>Dispatcher.UIThread</c> reached directly, for exactly the reason
+    /// <c>TransfersViewModel</c>'s is one — see the remark there. It is process-wide and belongs to whichever
+    /// thread touched it first, so a suite that runs with no window has no way to drain it and no way to
+    /// know whose it is. This one exists because connection phases are reported from the handshake's own
+    /// thread, which is the first thing in this class that has to cross onto the UI thread and also has to
+    /// be assertable: the three <c>Dispatcher.UIThread.Post</c> calls that predate it are the ones this
+    /// suite's own comments record as out of reach, and they are left alone rather than swept in here.
+    /// </para>
+    /// </param>
    internal MainWindowViewModel(
        ClientPaths paths,
        ClientCacheFactory caches,
@@ -483,8 +499,11 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        ResumeHandler? resume = null,
        Func<string, Task>? copyToClipboard = null,
        string? deviceName = null,
-        IUpdateChannel? updates = null)
+        IUpdateChannel? updates = null,
+        Action<Action>? post = null)
    {
+        this.post = post ?? (action => Dispatcher.UIThread.Post(action));
+
        this.paths = paths;
        this.caches = caches;
        this.workspace = workspace;
@@ -531,16 +550,30 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp

        updateScreen = CreateUpdateScreen(updates);

-        // Read straight away rather than at first use, so the value is right before anything can read it —
-        // a phone draws its terminal buttons from this, and a size that arrived a moment later would show
-        // as the interface correcting itself.
-        TerminalFontSize = ClientSettings.ClampTerminalFontSize(settings.Read().TerminalFontSize);
+        ApplyStoredPreferences();

        _ = TellRendererTheFontSizeAsync();

        StartSessionShellTracking();
    }

+    /// <summary>
+    /// Takes this machine's own preferences off disk, before anything can read them.
+    /// </summary>
+    /// <remarks>
+    /// Read straight away rather than at first use, and both of them for the same reason: whatever is stored
+    /// is what the first window draws. A phone builds its terminal's font buttons from the size, and the
+    /// session shell decides whether to give a sidebar 300 pixels — either arriving a moment later shows as
+    /// the interface correcting itself in front of the user.
+    /// </remarks>
+    private void ApplyStoredPreferences()
+    {
+        var stored = settings.Read();
+
+        TerminalFontSize = ClientSettings.ClampTerminalFontSize(stored.TerminalFontSize);
+        IsSessionSidebarOpen = stored.SessionSidebarOpen;
+    }
+
    /// <summary>
    /// Wires up the two pieces of v5b's session shell that this constructor had no room left to inline.
    /// </summary>
@@ -984,6 +1017,20 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
    /// </remarks>
    internal event EventHandler? TerminalSessionOpened;

+    /// <summary>
+    /// Raised when something this shell did belongs in the terminal the user is already looking at, so the
+    /// view can put the keyboard back there.
+    /// </summary>
+    /// <remarks>
+    /// Separate from <see cref="TerminalSessionOpened"/> because no session opened: the sidebar's SNIPS row
+    /// typed into one that was already running, and the click that did it moved Win32 focus onto an Avalonia
+    /// button. The page cannot fix that from its side — see the <c>term.focus()</c> at the end of
+    /// <c>terminal.js</c>'s paste handler, which only ever reaches <c>document.activeElement</c> — so the
+    /// half that can only be done by the host is asked for here. The view re-checks that a terminal is
+    /// actually showing before it acts; see <c>MainWindow.FocusTerminalWhenLaidOut</c>.
+    /// </remarks>
+    internal event EventHandler? TerminalFocusRequested;
+
    internal bool IsStarting => State == ShellState.Starting;

    internal bool IsNeedingServer => State == ShellState.NeedsServer;
@@ -1936,9 +1983,9 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
            return;
        }

-        // Removed first, so the workspace's SessionEnded — which fires as the pump unwinds — finds no tab to
-        // mark dead and does nothing. The alternative ordering leaves a window in which a tab that is on its
-        // way out is repainted as disconnected.
+        // Removed first, so the workspace's SessionEnded — announced once the close below has fully drained
+        // — finds no tab to mark dead and does nothing here. The alternative ordering leaves a window in
+        // which a tab that is on its way out is repainted as disconnected.
        var index = Tabs.IndexOf(tab);
        Tabs.Remove(tab);

@@ -2094,8 +2141,9 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp

    /// <remarks>
    /// Ranked rather than merely filtered: a host whose name starts with what was typed comes before one
-    /// that merely contains it, and both come before a match found only in the address. Typing three
-    /// characters of a name people use daily should not put that host third.
+    /// that merely contains it, both come before a match found only in the address, and all three come
+    /// before one found only in the vault's name. Typing three characters of a name people use daily should
+    /// not put that host third. See <see cref="Rank"/>.
    /// </remarks>
    private void RefreshSearchResults()
    {
@@ -2128,6 +2176,21 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        OnPropertyChanged(nameof(HasSearchResults));
    }

+    /// <summary>Where one host places against what was typed, or <see cref="int.MaxValue"/> for no match.</summary>
+    /// <remarks>
+    /// <para>
+    /// <b>The vault comes last, and only when the row prints it.</b> Its name is the widest of the three
+    /// readings — one word can match every host in a team's vault at once — so a host whose own name or
+    /// address answers the query has to come first, or typing a machine's name would bury it under everybody
+    /// else's.
+    /// </para>
+    /// <para>
+    /// <see cref="HostRowViewModel.HasVaultBadge"/> rather than the name itself, so this matches exactly what
+    /// the row shows: a session holding one vault prints no vault on any row, and matching a name nothing
+    /// displays would answer a query with a list whose reason for existing is invisible — type "personal"
+    /// there and every host comes back for no reason anybody can see.
+    /// </para>
+    /// </remarks>
    private static int Rank(HostRowViewModel host, string query)
    {
        if (host.Label.StartsWith(query, StringComparison.CurrentCultureIgnoreCase))
@@ -2140,8 +2203,14 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
            return 1;
        }

-        return host.Address.Contains(query, StringComparison.CurrentCultureIgnoreCase)
-            ? 2
+        if (host.Address.Contains(query, StringComparison.CurrentCultureIgnoreCase))
+        {
+            return 2;
+        }
+
+        return host.HasVaultBadge
+            && host.VaultName.Contains(query, StringComparison.CurrentCultureIgnoreCase)
+            ? 3
            : int.MaxValue;
    }

@@ -3243,7 +3312,7 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
            oldValue.PropertyChanged -= OnVaultPropertyChanged;
            oldValue.Hosts.CollectionChanged -= OnVaultHostsChanged;

-            // The three connection events are kept while an attempt is still in flight, and that is not an
+            // The four connection events are kept while an attempt is still in flight, and that is not an
            // oversight. Locking does not end a handshake any more than it ends a shell — the workspace is
            // what holds both, and it outlives every vault — so a connection started just before a lock still
            // has an answer coming, and the tab standing in for it is still in the strip afterwards, because
@@ -3257,6 +3326,7 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
            if (attempts.Count == 0)
            {
                oldValue.ConnectionStarting -= OnVaultConnectionStarting;
+                oldValue.ConnectionProgress -= OnVaultConnectionProgress;
                oldValue.ConnectionFailed -= OnVaultConnectionFailed;
                oldValue.SessionOpened -= OnVaultSessionOpened;
            }
@@ -3265,6 +3335,7 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        if (newValue is not null)
        {
            newValue.ConnectionStarting += OnVaultConnectionStarting;
+            newValue.ConnectionProgress += OnVaultConnectionProgress;
            newValue.ConnectionFailed += OnVaultConnectionFailed;
            newValue.SessionOpened += OnVaultSessionOpened;
            newValue.PropertyChanged += OnVaultPropertyChanged;
@@ -3406,6 +3477,41 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        AdoptTab(tab);
    }

+    /// <summary>
+    /// Moves a connecting tab's step list on, from the handshake's own report.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The one place the phases raised by <c>VaultViewModel.ConnectionProgress</c> are marshalled, and the
+    /// reason that event does not marshal for itself: doing it here means it happens once, visibly, at the
+    /// only boundary that cares — everything this touches is a view model an Avalonia binding is attached to.
+    /// </para>
+    /// <para>
+    /// Posted unconditionally rather than applied inline when it looks safe. Some phases really do arrive
+    /// on this thread — the first is reported before the handshake has yielded at all — and a
+    /// <c>CheckAccess</c> fast path for them would buy one dispatcher turn on a card that is up for seconds,
+    /// at the price of the two orderings existing at once and only one of them being the one a test runs.
+    /// </para>
+    /// <para>
+    /// A step that arrives after the attempt has settled is harmless and needs no guard here:
+    /// <see cref="TerminalTabViewModel.Advance"/> ignores anything reported to a tab that is no longer
+    /// connecting, which is what a posted phase landing behind its own <see cref="OnVaultSessionOpened"/>
+    /// looks like.
+    /// </para>
+    /// <para>
+    /// A report for an attempt with no tab is dropped, exactly as the other two handlers drop one: the user
+    /// closed the connecting tab and there is nothing left to draw a step on. The handshake is not affected
+    /// and its session is still adopted if it opens.
+    /// </para>
+    /// </remarks>
+    private void OnVaultConnectionProgress(object? sender, ConnectionProgressEventArgs e) => post(() =>
+    {
+        if (attempts.TryGetValue(e.AttemptId, out var tab))
+        {
+            tab.Advance(e.Step);
+        }
+    });
+
    /// <summary>
    /// Redraws the vault menu after a synchronisation pass found a vault this account had not seen.
    /// </summary>
@@ -3768,6 +3874,72 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        (IsTerminalSurface && SelectedTab is not null)
        || (IsTransfersShowing && Transfers.IsConnected);

+    /// <summary>
+    /// Whether the sidebar is drawn in full, as opposed to collapsed to the rail that brings it back.
+    /// </summary>
+    /// <remarks>
+    /// A separate question from <see cref="ShowsQuickAccessSidebar"/>, and the two are not interchangeable:
+    /// that one is "is there a session for this to be about", which the shell answers, and this one is "does
+    /// the person want to see it", which only they can. Closed still draws something — a 34-pixel rail with
+    /// the way back on it; see <c>SessionSidebar.axaml</c> — because a panel that vanishes with no trace of
+    /// how to get it back is one people report as lost rather than as closed. Remembered between launches;
+    /// see <see cref="ToggleSessionSidebar"/> and <c>ClientSettings.SessionSidebarOpen</c>.
+    /// </remarks>
+    [ObservableProperty]
+    private bool isSessionSidebarOpen = true;
+
+    /// <summary>Opens the session sidebar, or closes it to its rail.</summary>
+    /// <remarks>
+    /// Written through on every toggle rather than on shutdown: this shell is disposed on paths that do not
+    /// all run to completion — a killed process, a phone's activity going away — and a preference that
+    /// survives only a clean exit is one that will sometimes be forgotten for no reason the user can see.
+    /// The store swallows its own failures and says whether it wrote; nothing here can do anything useful
+    /// with the answer, so the toggle stands whether or not the disk took it.
+    /// </remarks>
+    [RelayCommand]
+    private void ToggleSessionSidebar()
+    {
+        IsSessionSidebarOpen = !IsSessionSidebarOpen;
+
+        _ = settings.Write(settings.Read() with { SessionSidebarOpen = IsSessionSidebarOpen });
+    }
+
+    /// <summary>
+    /// The label on the sidebar's cross-surface row: where the other half of this host is.
+    /// </summary>
+    /// <remarks>
+    /// v5c-4 moved this button off the session shell's own 60-pixel header row and into the sidebar, and the
+    /// header went with it — see <c>SessionSidebar.axaml</c>. What the two surfaces hand in separately used
+    /// to be a pair of properties on the header control; it is resolved here now, for the same reason
+    /// <see cref="SessionAddress"/> is: the sidebar is one control drawn on both surfaces, and a view that
+    /// branched on which one it was would be asking a question the shell has already answered.
+    /// </remarks>
+    internal string SessionCrossSurfaceLabel => IsTerminalSurface ? "Open SFTP" : "Open terminal";
+
+    /// <summary>Goes to the other half of the session the sidebar is about.</summary>
+    /// <remarks>
+    /// The two directions were two commands bound from two usages of the header control, and they still are
+    /// two methods — <see cref="SelectFilesHostAsync"/> takes a tab and opens an SFTP connection to its host;
+    /// <see cref="OpenTerminalForFilesHostAsync"/> dials a fresh terminal at whatever SFTP has open, because
+    /// there is no terminal session to reuse. What is new is only that one control now asks for both, so the
+    /// branch lives here beside <see cref="SessionCrossSurfaceLabel"/>, which has to agree with it.
+    /// </remarks>
+    [RelayCommand]
+    private async Task OpenOtherSurfaceAsync()
+    {
+        if (IsTerminalSurface)
+        {
+            if (SelectedTab is { } tab)
+            {
+                await SelectFilesHostAsync(tab).ConfigureAwait(true);
+            }
+
+            return;
+        }
+
+        await OpenTerminalForFilesHostAsync().ConfigureAwait(true);
+    }
+
    /// <summary>
    /// Opens the files screen on the active tab's host and navigates its remote pane to one of its pins.
    /// </summary>
@@ -3840,6 +4012,12 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        if (screen.CanInsert)
        {
            await screen.InsertCommand.ExecuteAsync(null).ConfigureAwait(true);
+
+            // The click that got here took the keyboard off the terminal and gave it to the sidebar row, so
+            // the command lands at a prompt that cannot be typed at until somebody clicks the pane. Asked
+            // for after the insert rather than before it, so the caret arrives to find the text already
+            // there. See TerminalFocusRequested.
+            TerminalFocusRequested?.Invoke(this, EventArgs.Empty);
            return;
        }

@@ -3933,14 +4111,15 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
    }

    /// <summary>
-    /// The account and endpoint the session shell's header and status bar are about right now, or null when
+    /// The account and endpoint the session shell's sidebar and status bar are about right now, or null when
    /// neither surface has one.
    /// </summary>
    /// <remarks>
    /// One property reading whichever surface is showing, rather than one binding per surface reading its own
-    /// source directly — <c>SessionHeader.axaml</c> and <c>SessionStatusBar.axaml</c> are the same markup on
+    /// source directly — <c>SessionSidebar.axaml</c> and <c>SessionStatusBar.axaml</c> are the same markup on
    /// both surfaces precisely because the shell resolves "which fact source" here instead of asking the view
-    /// to. The terminal's is <see cref="SelectedTab"/>'s own address; SFTP's is <see cref="TransfersViewModel.ConnectedTo"/>,
+    /// to. It was the retired header row that printed this first; v5c-4 moved the line into the sidebar's own
+    /// session block and left this property exactly as it was. The terminal's is <see cref="SelectedTab"/>'s own address; SFTP's is <see cref="TransfersViewModel.ConnectedTo"/>,
    /// which is already the account and endpoint actually dialled — nothing here re-derives it.
    /// </remarks>
    internal string? SessionAddress => Surface switch
@@ -4085,6 +4264,10 @@ internal sealed partial class MainWindowViewModel : ObservableObject, IAsyncDisp
        OnPropertyChanged(nameof(SessionIdentityLabel));
        OnPropertyChanged(nameof(SessionIdentityText));
        OnPropertyChanged(nameof(ShowsQuickAccessSidebar));
+
+        // v5c-4: the sidebar's cross-surface row says where the other half of this session is, so it turns
+        // over with the surface exactly as the facts above do.
+        OnPropertyChanged(nameof(SessionCrossSurfaceLabel));
    }

    /// <remarks>
@@ -1,7 +1,129 @@
 using CommunityToolkit.Mvvm.ComponentModel;
+using DodoSSH.Client.Ssh;

 namespace DodoSSH.Client.Shell.ViewModels;

+/// <summary>
+/// One named part of making a connection, in the order they happen.
+/// </summary>
+/// <remarks>
+/// <para>
+/// <see cref="SshConnectionPhase"/> with one more at the front. The SSH assembly reports four phases and
+/// knows about no others, which is correct for it — it has never heard of a renderer. But the first thing a
+/// connection here waits on is the terminal page attaching its socket, and on the first connection after a
+/// cold start that is a real wait with a real failure mode of its own: a missing WebView2 runtime. A step
+/// list that began at "reaching the host" would leave the one wait most likely to hang unnamed.
+/// </para>
+/// <para>
+/// Declared here rather than shared with the SSH layer for that reason, and the mapping between the two is
+/// one <c>switch</c> in <c>VaultViewModel</c>. The numbering is the order and the order is load-bearing:
+/// <see cref="TerminalTabViewModel.Advance"/> compares these values to decide what is already behind it.
+/// </para>
+/// </remarks>
+internal enum ConnectionStep
+{
+    /// <summary>Waiting for the renderer to attach, before anything is dialled.</summary>
+    PreparingTerminal = 0,
+
+    /// <inheritdoc cref="SshConnectionPhase.Reaching" />
+    Reaching = 1,
+
+    /// <inheritdoc cref="SshConnectionPhase.CheckingHostKey" />
+    CheckingHostKey = 2,
+
+    /// <inheritdoc cref="SshConnectionPhase.Authenticating" />
+    Authenticating = 3,
+
+    /// <inheritdoc cref="SshConnectionPhase.OpeningShell" />
+    OpeningShell = 4,
+}
+
+/// <summary>How one step of a connection is getting on.</summary>
+/// <remarks>
+/// Four states rather than a bool per row, because a step list is read as a sequence and the reader's
+/// question at each row is which of the four this is: behind us, happening, not yet, or where it stopped.
+/// <see cref="Stopped"/> exists only for the row a failure landed on — see
+/// <see cref="TerminalTabViewModel.Failed"/> — and is what turns the list from a progress bar into an
+/// account of how far the attempt got.
+/// </remarks>
+internal enum ConnectionStepState
+{
+    /// <summary>Not started. Nothing is known about it yet.</summary>
+    Pending = 0,
+
+    /// <summary>Happening now.</summary>
+    Running = 1,
+
+    /// <summary>Finished, because something after it started.</summary>
+    Done = 2,
+
+    /// <summary>Where the attempt stopped. There is no step after this one.</summary>
+    Stopped = 3,
+}
+
+/// <summary>One row of the connecting card's step list.</summary>
+/// <remarks>
+/// A view model per step rather than an index the view compares against, because each row draws its own
+/// state and an <c>ItemsControl</c> has no way to ask "am I before the current one?" — the alternative was a
+/// converter taking two bindings, which is the same comparison written somewhere it cannot be tested.
+/// </remarks>
+internal sealed partial class ConnectionStepViewModel : ObservableObject
+{
+    internal ConnectionStepViewModel(ConnectionStep step, string caption)
+    {
+        Step = step;
+        Caption = caption;
+    }
+
+    /// <summary>Which step this is.</summary>
+    internal ConnectionStep Step { get; }
+
+    /// <summary>What the row says, in the present tense of the thing being waited on.</summary>
+    internal string Caption { get; }
+
+    /// <inheritdoc cref="ConnectionStepState" />
+    [ObservableProperty]
+    private ConnectionStepState state;
+
+    /// <summary>Whether this step is the one happening now.</summary>
+    internal bool IsRunning => State is ConnectionStepState.Running;
+
+    /// <summary>Whether this step finished.</summary>
+    internal bool IsDone => State is ConnectionStepState.Done;
+
+    /// <summary>Whether the attempt stopped on this step.</summary>
+    internal bool IsStopped => State is ConnectionStepState.Stopped;
+
+    /// <summary>
+    /// The character drawn beside the caption for whichever state this is in.
+    /// </summary>
+    /// <remarks>
+    /// Here rather than in a converter for the reason <c>TransferRowViewModel.StatusWord</c> is: the mapping
+    /// is four cases with no arithmetic, and a converter would put it in a file the shell's tests cannot
+    /// reach. The colours stay in the view, where the palette is.
+    /// <para>
+    /// Four distinguishable shapes rather than one recoloured, because the difference between a step that
+    /// finished and a step still running has to survive somebody who cannot tell this design's green from
+    /// its amber.
+    /// </para>
+    /// </remarks>
+    internal string Mark => State switch
+    {
+        ConnectionStepState.Done => "✓",
+        ConnectionStepState.Running => "●",
+        ConnectionStepState.Stopped => "✕",
+        _ => "○",
+    };
+
+    partial void OnStateChanged(ConnectionStepState value)
+    {
+        OnPropertyChanged(nameof(IsRunning));
+        OnPropertyChanged(nameof(IsDone));
+        OnPropertyChanged(nameof(IsStopped));
+        OnPropertyChanged(nameof(Mark));
+    }
+}
+
 /// <summary>
 /// How far along a tab's connection is.
 /// </summary>
@@ -57,8 +179,23 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
    {
        Label = label;
        Address = address;
-        status = "connecting…";
        isLive = false;
+
+        Steps =
+        [
+            new ConnectionStepViewModel(ConnectionStep.PreparingTerminal, "Starting the terminal"),
+            new ConnectionStepViewModel(ConnectionStep.Reaching, "Reaching the host"),
+            new ConnectionStepViewModel(ConnectionStep.CheckingHostKey, "Checking the host key"),
+            new ConnectionStepViewModel(ConnectionStep.Authenticating, "Signing in"),
+            new ConnectionStepViewModel(ConnectionStep.OpeningShell, "Opening the shell"),
+        ];
+
+        // The first step is running before anything is awaited, because it is: the tab is created in the
+        // same turn as the click and the renderer wait starts immediately after. A list that opened with
+        // every row pending would show a connection that had not begun, which is one turn of the dispatcher
+        // away from being untrue and is the turn the card is first drawn in.
+        status = Steps[0].Caption;
+        Steps[0].State = ConnectionStepState.Running;
    }

    /// <summary>A tab for a session that is already open.</summary>
@@ -72,6 +209,12 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
        state = TerminalTabState.Open;
        status = string.Empty;
        isLive = true;
+
+        // A session that already exists got through every step by definition, even though this tab watched
+        // none of them happen — an adopted session is one whose connecting tab the user closed. The list is
+        // never drawn for a tab in this state; it is filled in so that nothing downstream has to treat "open"
+        // as a fourth answer to "how far did it get".
+        CompleteSteps();
    }

    /// <summary>
@@ -128,6 +271,36 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
    /// </remarks>
    internal string? IdentityLabel { get; set; }

+    /// <summary>
+    /// How far this connection got, step by step, for the card that stands in for the pane.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// Fixed at construction and never added to or removed from — the steps of a connection are known before
+    /// it starts, and only their state changes — so a plain array is enough and the view needs no collection
+    /// change notification for it.
+    /// </para>
+    /// <para>
+    /// <b>Every row here is reported, not guessed.</b> The states come from
+    /// <see cref="SshConnectionPhase"/>, raised by the handshake itself at the moment each part of it begins.
+    /// Nothing on this list is a timer, a fraction, or a step this view model decided had probably finished
+    /// by now. That is the whole reason it is worth showing: a card that invented plausible progress would be
+    /// indistinguishable from one that had stopped receiving any.
+    /// </para>
+    /// </remarks>
+    internal IReadOnlyList<ConnectionStepViewModel> Steps { get; }
+
+    /// <summary>How many steps are behind the attempt, for the card's track.</summary>
+    /// <remarks>
+    /// Counted rather than stored, and it counts <see cref="ConnectionStepState.Done"/> alone: the running
+    /// step is deliberately not half a step. The track fills to where the attempt has actually got to and
+    /// stops there, which is the same promise the list itself makes.
+    /// </remarks>
+    internal int StepsDone => Steps.Count(step => step.IsDone);
+
+    /// <summary>How many steps there are, for the card's track.</summary>
+    internal int StepCount => Steps.Count;
+
    /// <inheritdoc cref="TerminalTabState" />
    [ObservableProperty]
    private TerminalTabState state;
@@ -187,6 +360,54 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
    /// <summary>Whether this tab is a connection that never happened.</summary>
    internal bool IsFailed => State is TerminalTabState.Failed;

+    /// <summary>
+    /// Records that the connection has reached a named step.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// Everything before <paramref name="step"/> is marked done, because a phase that has begun is proof the
+    /// ones before it ended — the handshake is a sequence and there is no way to be at one point in it
+    /// without having passed the earlier ones. That is also what covers a step too fast to observe: it is
+    /// closed by its successor rather than needing a report of its own.
+    /// </para>
+    /// <para>
+    /// Monotonic, and silently so. A report that has already been passed is ignored rather than rewinding
+    /// the list, because the one thing that can produce one is a retry after the host-key question, and a
+    /// card that jumped backwards would read as the connection having come undone.
+    /// </para>
+    /// </remarks>
+    internal void Advance(ConnectionStep step)
+    {
+        if (State is not TerminalTabState.Connecting)
+        {
+            // Nothing to draw and nothing to correct. A late report from a handshake that has since
+            // finished or been given up on is not worth reopening a settled tab for.
+            return;
+        }
+
+        var reached = Steps.FirstOrDefault(row => row.Step == step);
+
+        if (reached is null || reached.IsDone)
+        {
+            return;
+        }
+
+        foreach (var row in Steps)
+        {
+            if (row.Step < step)
+            {
+                row.State = ConnectionStepState.Done;
+            }
+            else if (row.Step == step)
+            {
+                row.State = ConnectionStepState.Running;
+            }
+        }
+
+        Status = reached.Caption;
+        OnPropertyChanged(nameof(StepsDone));
+    }
+
    /// <summary>Takes ownership of the session that has just opened for this tab.</summary>
    internal void Opened(uint sessionId)
    {
@@ -194,6 +415,8 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
        Status = string.Empty;
        IsLive = true;
        State = TerminalTabState.Open;
+
+        CompleteSteps();
    }

    /// <summary>
@@ -208,9 +431,33 @@ internal sealed partial class TerminalTabViewModel : ObservableObject
    {
        Status = reason;
        IsLive = false;
+
+        // Before the state change, so the list is already correct the first time a view asks. The step that
+        // was running is where it stopped, and the ones behind it stay done: how far a refused connection
+        // got is the most useful thing the card still knows, and it is the difference between "that host is
+        // not there" and "that host is there and would not have me".
+        foreach (var row in Steps)
+        {
+            if (row.IsRunning)
+            {
+                row.State = ConnectionStepState.Stopped;
+            }
+        }
+
        State = TerminalTabState.Failed;
    }

+    /// <summary>Marks every step done, for a connection that is no longer being waited on.</summary>
+    private void CompleteSteps()
+    {
+        foreach (var row in Steps)
+        {
+            row.State = ConnectionStepState.Done;
+        }
+
+        OnPropertyChanged(nameof(StepsDone));
+    }
+
    partial void OnStateChanged(TerminalTabState value)
    {
        OnPropertyChanged(nameof(HasSession));
@@ -306,6 +306,83 @@ internal sealed record RemoteDeletionRequest(string Name, string FullPath, bool
            + "touched, and there is no undo.";
 }

+/// <summary>Which of the two things a rename actually is, from where the user is standing.</summary>
+/// <remarks>
+/// One SFTP operation underneath — <c>ISftpSession.RenameAsync</c> is the whole of both — and two separate
+/// questions on the screen, because the answer a person types is a different kind of thing each time. A
+/// rename takes a name and must not take a path; a move takes a directory and must not take a name. Folding
+/// them into one box asking for a destination path would be fewer controls and a worse question: the two
+/// mistakes it invites — typing a directory where a name goes, or a name where a directory goes — are
+/// exactly the ones this split makes impossible to make.
+/// </remarks>
+internal enum RemoteMoveKind
+{
+    /// <summary>Same directory, different name.</summary>
+    Rename,
+
+    /// <summary>Same name, different directory.</summary>
+    Move,
+}
+
+/// <summary>
+/// Something on the host that is being given a new name or a new home, and has not been committed yet.
+/// </summary>
+/// <remarks>
+/// <para>
+/// The shape <see cref="RemoteDeletionRequest"/> already established, and here for the same reason: it
+/// carries the full path rather than the name, so nothing that happens between opening the form and
+/// pressing its button can point the operation at a different file. The selection can move underneath it —
+/// a refresh nulls it — and the request stays about what was asked about.
+/// </para>
+/// <para>
+/// <b>It asks rather than warns.</b> Renaming and moving on the host are not deletions: what they change is
+/// where the bytes are reached from, and both are undone by doing them again the other way. So this form
+/// carries a field and a verb instead of <see cref="RemoteDeletionRequest.Consequence"/>'s "there is no
+/// undo" — the one warning on this screen that is earned, and worth not spending twice.
+/// </para>
+/// </remarks>
+/// <param name="Name">What the row is called now.</param>
+/// <param name="FullPath">Where it is now, which is the end of the operation nothing may re-point.</param>
+/// <param name="IsDirectory">Whether it is a directory, which changes what moving it can be asked to do.</param>
+/// <param name="Kind">Which question is being asked.</param>
+internal sealed record RemoteMoveRequest(string Name, string FullPath, bool IsDirectory, RemoteMoveKind Kind)
+{
+    /// <summary>Whether this is the rename question rather than the move one.</summary>
+    internal bool IsRename => Kind is RemoteMoveKind.Rename;
+
+    /// <summary>The heading, which names the thing rather than only the verb.</summary>
+    internal string Question => IsRename
+        ? $"Rename '{Name}' on the host"
+        : $"Move '{Name}' to another directory";
+
+    /// <summary>
+    /// What an empty box shows, which is the shape of the answer rather than an example of one.
+    /// </summary>
+    /// <remarks>
+    /// The placeholder is the whole of what says which of the two kinds of answer the box wants — there is
+    /// no label above it. A field label would be a second line saying what this line already says, and the
+    /// pane this form opens in is 204 pixels wide inside the session shell: every line it does not need is
+    /// a line of the listing underneath that survives.
+    /// </remarks>
+    internal string FieldHint => IsRename ? "new name" : "/path/to/directory";
+
+    /// <summary>What the button that commits it says.</summary>
+    internal string ConfirmLabel => IsRename ? "RENAME" : "MOVE";
+
+    /// <summary>
+    /// What it does, in the one sentence the form has room for.
+    /// </summary>
+    /// <remarks>
+    /// Both halves state the refusal rather than the action, because the action is already in the heading
+    /// and the refusal is the part nobody expects: SFTP's rename does not replace, so a name already taken
+    /// is a failure rather than a silent overwrite — which is the same promise the transfer queue makes and
+    /// rests on the same server behaviour.
+    /// </remarks>
+    internal string Note => IsRename
+        ? "A name already taken is refused, not overwritten."
+        : "Relative to the directory showing. A name already taken is refused, not overwritten.";
+}
+
 /// <summary>
 /// The transfers screen: a host, two directory panes, and the queue between them.
 /// </summary>
@@ -382,6 +459,15 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo

    private bool disposed;

+    /// <summary>Whether the remote listing on screen is known to be out of date.</summary>
+    /// <remarks>
+    /// Set by <see cref="NoteTransferLanded"/> and cleared by any listing of the directory it is about.
+    /// Read back by <see cref="RemoteListingIsStale"/>, which exists so that the deferral this drives can be
+    /// asserted on in the state where it defers — the moment a transfer lands over an open question is not
+    /// one a test can otherwise see the inside of.
+    /// </remarks>
+    private bool remoteListingIsStale;
+
    /// <param name="sftp">Opens SFTP sessions.</param>
    /// <param name="clock">Time source, for transfer rates and timestamps.</param>
    /// <param name="post">
@@ -706,6 +792,26 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo

    internal ObservableCollection<CrumbViewModel> RemoteTrail { get; } = [];

+    /// <summary>
+    /// What is in the pane's path box, which is not where the pane is.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// A draft beside <see cref="RemotePath"/> rather than the path itself made editable, and the two facts
+    /// really are different: <see cref="RemotePath"/> is the directory that was listed, and this is what
+    /// somebody is halfway through typing. Binding the box straight to the path would navigate on every
+    /// keystroke — <c>/</c>, then <c>/v</c>, then <c>/va</c> — which is a round trip and a failed listing
+    /// per character.
+    /// </para>
+    /// <para>
+    /// It is written back from <see cref="ListRemoteAsync"/>, so every other way of moving — a breadcrumb,
+    /// UP, a pin, connecting — puts the real path back in the box. What a failed listing leaves is what was
+    /// typed, on purpose: the path that did not resolve is the one worth having in front of you to correct.
+    /// </para>
+    /// </remarks>
+    [ObservableProperty]
+    private string remotePathDraft = string.Empty;
+
    [ObservableProperty]
    private RemoteEntryRowViewModel? selectedRemoteEntry;

@@ -721,13 +827,75 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo

    internal bool IsConfirmingRemoteDeletion => PendingRemoteDeletion is not null;

+    /// <summary>The rename or move being filled in, or null when none is.</summary>
+    [ObservableProperty]
+    private RemoteMoveRequest? pendingRemoteMove;
+
+    /// <summary>
+    /// What has been typed into whichever of the two forms is open — a name, or a directory.
+    /// </summary>
+    /// <remarks>
+    /// One box for both, because only one of the two forms is ever open: they replace each other, and a
+    /// second field would be a second thing to clear at every place this one is. Seeded from the row when
+    /// the form opens — the current name for a rename, the current directory for a move — so that both
+    /// questions start from the answer that changes nothing, and what somebody edits is the part they came
+    /// to change.
+    /// </remarks>
+    [ObservableProperty]
+    private string remoteMoveTarget = string.Empty;
+
+    internal bool IsMovingRemote => PendingRemoteMove is not null;
+
+    /// <summary>
+    /// Whether the pane is waiting on an answer about the selected row.
+    /// </summary>
+    /// <remarks>
+    /// The three item buttons and the automatic refresh all read this rather than the two flags separately.
+    /// Deleting, renaming and moving are one at a time by construction — each form's own opening clears the
+    /// other — and what this names is the state where none of them may be started and nothing may pull the
+    /// listing out from under the question. See <see cref="SettleRemoteListingAsync"/>.
+    /// </remarks>
+    internal bool IsAskingAboutRemoteEntry => IsConfirmingRemoteDeletion || IsMovingRemote;
+
    /// <summary>Whether the pane's DELETE is live.</summary>
    /// <remarks>
-    /// Off while its own question is up, so a second press cannot arm a second one behind the card — and
-    /// disabled rather than hidden, because this button sits in a row of three and a gap where it was would
-    /// move UP and REFRESH out from under the pointer.
+    /// Off while any of the three questions is up, so a second press cannot arm a second one behind the
+    /// form — and disabled rather than hidden, because these buttons sit in a row and a gap where one was
+    /// would move the other two out from under the pointer.
    /// </remarks>
-    internal bool CanDeleteRemote => IsConnected && !IsConfirmingRemoteDeletion;
+    internal bool CanDeleteRemote => IsConnected && !IsAskingAboutRemoteEntry;
+
+    /// <inheritdoc cref="CanDeleteRemote" />
+    internal bool CanRenameRemote => CanDeleteRemote;
+
+    /// <inheritdoc cref="CanDeleteRemote" />
+    internal bool CanMoveRemote => CanDeleteRemote;
+
+    /// <summary>
+    /// Whether the pane shows the row of things that can be done to the chosen row.
+    /// </summary>
+    /// <remarks>
+    /// Gone while one of the three questions is up, rather than merely disabled, and the phone head does
+    /// the same with its own buttons for the same reason: the form is the answer to the question those
+    /// buttons ask, and a pane 204 pixels wide inside the session shell has to spend the height on one or
+    /// the other. What is not on screen is not a control somebody can press by mistake either.
+    /// </remarks>
+    internal bool ShowsRemoteItemActions => IsConnected && !IsAskingAboutRemoteEntry;
+
+    /// <summary>Whether a transfer has landed in the directory showing and it has not been re-read yet.</summary>
+    /// <remarks>See <see cref="SettleRemoteListingAsync"/> for when that is allowed to be true for a while.</remarks>
+    internal bool RemoteListingIsStale => remoteListingIsStale;
+
+    /// <summary>
+    /// What the item row says it is about — the chosen row's name, or the sentence that says to choose one.
+    /// </summary>
+    /// <remarks>
+    /// A name rather than a full path, unlike the questions the buttons open: this line sits directly above
+    /// the listing with the row it names highlighted in it, so the disambiguation a confirmation needs is
+    /// already on screen. The forms carry the path, because by then the answer is being committed rather
+    /// than merely looked at.
+    /// </remarks>
+    internal string SelectedRemoteName => SelectedRemoteEntry?.Name ?? "Choose a row to act on it";

    // ---- The local pane ----

@@ -1199,6 +1367,58 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
        }
    }

+    /// <summary>
+    /// Goes wherever the path box says.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The way out of the breadcrumb's own limit: it can only offer what is under the directory already
+    /// listed, so crossing the filesystem meant walking down to the root and back up again, a round trip a
+    /// level. What is typed may be absolute, relative to the directory showing, or start at <c>~</c> — see
+    /// <see cref="SftpPath.Resolve"/>, which is where all three become one absolute path.
+    /// </para>
+    /// <para>
+    /// A blank box is not a request to go to the root. It puts the current path back and stays where it is:
+    /// somebody who cleared the box and pressed Enter has not asked for anything, and <c>/</c> is a long way
+    /// from where they were.
+    /// </para>
+    /// <para>
+    /// Nothing is validated here beyond that. Whether the path exists, is a directory and may be read are
+    /// three questions only the server can answer, and it answers all three at once by refusing the listing
+    /// — which lands in the status line with the server's own words in it.
+    /// </para>
+    /// </remarks>
+    [RelayCommand]
+    private async Task GoToTypedRemotePathAsync(CancellationToken cancellationToken)
+    {
+        if (session is not { } open)
+        {
+            Status = "Connect to a host first.";
+            return;
+        }
+
+        if (RemotePathDraft.Trim().Length == 0)
+        {
+            RemotePathDraft = RemotePath;
+            return;
+        }
+
+        var from = RemotePath.Length > 0 ? RemotePath : open.HomeDirectory;
+
+        await NavigateRemoteAsync(
+            SftpPath.Resolve(from, RemotePathDraft, open.HomeDirectory), cancellationToken)
+            .ConfigureAwait(true);
+    }
+
+    /// <summary>Puts the real path back in the box, for the Escape key.</summary>
+    /// <remarks>
+    /// Half-typed text left in a box that says where you are is a box that is lying about where you are, and
+    /// the pane underneath it goes on showing the directory it always was. Escape is the way out of that
+    /// without having to remember what was in the box before.
+    /// </remarks>
+    [RelayCommand]
+    private void RevertTypedRemotePath() => RemotePathDraft = RemotePath;
+
    /// <summary>
    /// Opens whatever is selected in the remote pane, if it is somewhere to go.
    /// </summary>
@@ -1631,6 +1851,9 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
            return;
        }

+        // The other question goes, so the two forms cannot be on screen at once over one row.
+        PendingRemoteMove = null;
+
        PendingRemoteDeletion = new RemoteDeletionRequest(row.Name, row.FullPath, !row.IsFile);
    }

@@ -1666,8 +1889,173 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
    }

    /// <summary>Thinks better of it.</summary>
+    /// <remarks>
+    /// Settles the listing on the way out. A transfer that landed while the question was up left the pane
+    /// out of date and was not allowed to refresh it — see <see cref="SettleRemoteListingAsync"/> — so
+    /// dismissing the question is the moment that refresh becomes safe.
+    /// </remarks>
    [RelayCommand]
-    private void CancelDeleteRemote() => PendingRemoteDeletion = null;
+    private async Task CancelDeleteRemoteAsync()
+    {
+        PendingRemoteDeletion = null;
+
+        await SettleRemoteListingAsync().ConfigureAwait(true);
+    }
+
+    /// <summary>Opens the rename form on the chosen row.</summary>
+    [RelayCommand]
+    private void RenameRemote() => AskAboutMoving(RemoteMoveKind.Rename);
+
+    /// <summary>Opens the move form on the chosen row.</summary>
+    [RelayCommand]
+    private void MoveRemote() => AskAboutMoving(RemoteMoveKind.Move);
+
+    /// <remarks>
+    /// Both forms, because they differ only in what the box starts out holding and what the labels say —
+    /// see <see cref="RemoteMoveRequest"/>. The rename starts from the current name and the move from the
+    /// current directory, so each opens showing the answer that changes nothing and what gets edited is the
+    /// half somebody actually came to change.
+    /// </remarks>
+    private void AskAboutMoving(RemoteMoveKind kind)
+    {
+        if (SelectedRemoteEntry is not { } row)
+        {
+            Status = kind is RemoteMoveKind.Rename
+                ? "Choose something on the host to rename."
+                : "Choose something on the host to move.";
+
+            return;
+        }
+
+        // The other question goes, so the two forms cannot be on screen at once over one row.
+        PendingRemoteDeletion = null;
+
+        PendingRemoteMove = new RemoteMoveRequest(row.Name, row.FullPath, !row.IsFile, kind);
+        RemoteMoveTarget = kind is RemoteMoveKind.Rename
+            ? row.Name
+            : SftpPath.Parent(row.FullPath);
+    }
+
+    /// <summary>
+    /// Carries out whichever of the two was filled in.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// One SFTP rename underneath both, which is what the protocol offers and the whole of what a move is
+    /// on one host. It follows that neither works across hosts and neither works across a filesystem
+    /// boundary on the same host: the server refuses with <c>EXDEV</c>, and that refusal arrives in the
+    /// status line as the server's own sentence rather than being pre-empted by a guess here about which of
+    /// its mounts a path is on.
+    /// </para>
+    /// <para>
+    /// It acts on the path the form named rather than on the selection, for the reason
+    /// <see cref="ConfirmDeleteRemoteAsync"/> does: nothing between opening the form and pressing its button
+    /// may re-point it at a different file.
+    /// </para>
+    /// </remarks>
+    [RelayCommand]
+    private async Task ConfirmMoveRemoteAsync(CancellationToken cancellationToken)
+    {
+        if (PendingRemoteMove is not { } request)
+        {
+            return;
+        }
+
+        if (!TryResolveMoveDestination(request, out var destination, out var refusal))
+        {
+            // The form stays open. What was typed is what has to be corrected, and taking the form away
+            // would take the box holding it as well.
+            Status = refusal;
+            return;
+        }
+
+        PendingRemoteMove = null;
+
+        await RunAsync(
+            request.IsRename ? $"Renaming {request.Name}…" : $"Moving {request.Name}…",
+            async () =>
+            {
+                await RequireSession()
+                    .RenameAsync(request.FullPath, destination, cancellationToken)
+                    .ConfigureAwait(true);
+
+                await ListRemoteAsync(RemotePath, cancellationToken).ConfigureAwait(true);
+
+                Status = request.IsRename
+                    ? $"Renamed {request.Name} to {SftpPath.Name(destination)}."
+                    : $"Moved {request.Name} to {SftpPath.Parent(destination)}.";
+            }).ConfigureAwait(true);
+    }
+
+    /// <summary>Thinks better of it.</summary>
+    /// <inheritdoc cref="CancelDeleteRemoteAsync" path="/remarks" />
+    [RelayCommand]
+    private async Task CancelMoveRemoteAsync()
+    {
+        PendingRemoteMove = null;
+        RemoteMoveTarget = string.Empty;
+
+        await SettleRemoteListingAsync().ConfigureAwait(true);
+    }
+
+    /// <summary>
+    /// Works out where the typed answer actually points, or why it points nowhere.
+    /// </summary>
+    /// <remarks>
+    /// The three refusals here are the ones a server's own error message would not explain. A separator in
+    /// a name is a move wearing a rename's clothing and the server would simply say "no such file" about a
+    /// directory nobody meant to name; a destination equal to the source is a request that succeeds while
+    /// doing nothing; and a directory moved inside itself is <c>EINVAL</c>, which is true and says nothing.
+    /// Everything else — a path that is not there, a name already taken, a mount that cannot be crossed —
+    /// is left to the server, which knows and this does not.
+    /// </remarks>
+    private bool TryResolveMoveDestination(
+        RemoteMoveRequest request, out string destination, out string refusal)
+    {
+        destination = string.Empty;
+        var typed = RemoteMoveTarget.Trim();
+
+        if (typed.Length == 0)
+        {
+            refusal = request.IsRename
+                ? "Type a new name for it."
+                : "Type the directory to move it into.";
+
+            return false;
+        }
+
+        if (request.IsRename)
+        {
+            if (typed.Contains('/', StringComparison.Ordinal))
+            {
+                refusal = "A name cannot contain '/'. Use MOVE to put it in another directory.";
+                return false;
+            }
+
+            destination = SftpPath.Combine(SftpPath.Parent(request.FullPath), typed);
+        }
+        else
+        {
+            var into = SftpPath.Resolve(RemotePath, typed, session?.HomeDirectory);
+            destination = SftpPath.Combine(into, request.Name);
+        }
+
+        if (string.Equals(destination, request.FullPath, StringComparison.Ordinal))
+        {
+            refusal = $"{request.Name} is already there.";
+            return false;
+        }
+
+        if (request.IsDirectory
+            && destination.StartsWith(request.FullPath + "/", StringComparison.Ordinal))
+        {
+            refusal = "A directory cannot be moved inside itself.";
+            return false;
+        }
+
+        refusal = string.Empty;
+        return true;
+    }

    /// <inheritdoc />
    public async ValueTask DisposeAsync()
@@ -1713,13 +2101,31 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
        return RunAsync($"Reading {path}…", () => ListRemoteAsync(path, cancellationToken));
    }

+    /// <remarks>
+    /// <para>
+    /// <b>The selection survives if the row it was on does.</b> Every listing replaces every row object, so
+    /// keeping the object would keep a selection pointing at something no longer in the list; it is re-found
+    /// by path instead. This matters because a listing is no longer only something somebody asked for — a
+    /// finished upload refreshes this pane on its own, and a refresh that cleared the selection would take
+    /// the row out from under whoever was about to press RENAME on it.
+    /// </para>
+    /// <para>
+    /// The path box is written back here rather than by each caller, so that every way of moving — a crumb,
+    /// UP, a pin, connecting, a rename that lands — leaves the box saying where the pane actually is.
+    /// </para>
+    /// </remarks>
    private async Task ListRemoteAsync(string path, CancellationToken cancellationToken)
    {
        var entries = await RequireSession().ListAsync(path, cancellationToken).ConfigureAwait(true);
+        var wasSelected = SelectedRemoteEntry?.FullPath;

        RemotePath = path;
+        RemotePathDraft = path;
        SelectedRemoteEntry = null;

+        // Whatever made it stale, this is a fresh read of the very directory that was stale.
+        remoteListingIsStale = false;
+
        RemoteEntries.Clear();

        foreach (var entry in entries)
@@ -1734,10 +2140,99 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
            RemoteTrail.Add(new CrumbViewModel(name, crumb));
        }

+        SelectedRemoteEntry = wasSelected is null
+            ? null
+            : RemoteEntries.FirstOrDefault(
+                row => string.Equals(row.FullPath, wasSelected, StringComparison.Ordinal));

        Status = string.Empty;
    }

+    /// <summary>
+    /// Re-reads the remote directory because something landed in it, if now is a moment to.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// <b>An upload that finished is a listing that is wrong.</b> The pane went on showing the directory as
+    /// it was before the file arrived, and the only way to see the file that had just been sent was to press
+    /// REFRESH — which is the application asking somebody to tell it about something it did itself.
+    /// </para>
+    /// <para>
+    /// <b>It waits rather than interrupting.</b> Three states are not the moment: another operation is
+    /// running, which would have two listings racing for the same collection; one of the three questions is
+    /// on screen, and pulling the listing out from under a question about a row is how the row somebody
+    /// answered about stops being the row that was acted on; or nothing is connected. In all three the
+    /// staleness is remembered and settled later — at the end of the operation, or when the question is
+    /// dismissed.
+    /// </para>
+    /// <para>
+    /// <b>It says nothing.</b> Nobody asked for this listing, so it neither announces itself nor reports a
+    /// failure: the status line at that moment is carrying the word about the transfer that just finished,
+    /// which is the news. A refresh that failed leaves the pane as it was and the staleness set, so the next
+    /// settling tries again.
+    /// </para>
+    /// </remarks>
+    internal async Task SettleRemoteListingAsync()
+    {
+        if (!remoteListingIsStale || !IsConnected || IsBusy || IsAskingAboutRemoteEntry
+            || RemotePath.Length == 0)
+        {
+            return;
+        }
+
+        var said = Status;
+
+        IsBusy = true;
+
+        try
+        {
+            await ListRemoteAsync(RemotePath, CancellationToken.None).ConfigureAwait(true);
+
+            Status = said;
+        }
+        catch (Exception exception) when (exception is not OutOfMemoryException)
+        {
+            remoteListingIsStale = true;
+        }
+        finally
+        {
+            IsBusy = false;
+        }
+    }
+
+    /// <summary>
+    /// Notices that a finished transfer changed a directory that is on screen.
+    /// </summary>
+    /// <remarks>
+    /// Both panes, because both go stale the same way and for the same reason — an upload lands on the host
+    /// and a download lands on this machine, and whichever pane is showing that directory is now showing it
+    /// as it was a moment ago. Only the directory actually on screen: a transfer into somewhere else changed
+    /// nothing anybody is looking at, and re-listing for it would be a round trip per completed transfer in
+    /// a queue that may be moving a hundred files elsewhere.
+    /// </remarks>
+    internal void NoteTransferLanded(TransferSnapshot transfer)
+    {
+        if (transfer.Direction is TransferDirection.Upload)
+        {
+            if (string.Equals(SftpPath.Parent(transfer.RemotePath), RemotePath, StringComparison.Ordinal))
+            {
+                remoteListingIsStale = true;
+
+                _ = SettleRemoteListingAsync();
+            }
+
+            return;
+        }
+
+        // The local pane is a filesystem call rather than a round trip, so there is nothing to defer: it is
+        // re-read where it stands. Compared case-insensitively because this end is Windows as often as not.
+        if (string.Equals(
+            Path.GetDirectoryName(transfer.LocalPath), LocalPath, StringComparison.OrdinalIgnoreCase))
+        {
+            NavigateLocal(LocalPath);
+        }
+    }
+
    /// <remarks>
    /// Synchronous, unlike its remote counterpart. A local directory listing is a filesystem call rather than
    /// a network round trip, and wrapping it in a task would put a state machine and a thread hop behind
@@ -1748,6 +2243,7 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
        try
        {
            var entries = LocalDirectory.List(path);
+            var wasSelected = SelectedLocalEntry?.FullPath;

            LocalPath = Path.GetFullPath(path);
            SelectedLocalEntry = null;
@@ -1761,6 +2257,13 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo

            RebuildLocalTrail();

+            // Re-found by path rather than kept, for the reason ListRemoteAsync gives: a finished download
+            // re-reads this pane on its own, and a refresh that cleared the selection would take the row
+            // out from under whoever was about to send it somewhere.
+            SelectedLocalEntry = wasSelected is null
+                ? null
+                : LocalEntries.FirstOrDefault(
+                    row => string.Equals(row.FullPath, wasSelected, StringComparison.OrdinalIgnoreCase));
        }
        catch (Exception exception) when (exception is IOException or UnauthorizedAccessException)
        {
@@ -1877,10 +2380,19 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
        ConnectedPinnedPaths.Clear();
        OnPropertyChanged(nameof(HasConnectedPins));
        RemotePath = string.Empty;
+        RemotePathDraft = string.Empty;
        RemoteEntries.Clear();
        RemoteTrail.Clear();
        SelectedRemoteEntry = null;

+        // Both questions go with the session they were about, and the box either of them was filled in
+        // from with them. A form left open over a pane that is no longer connected to anything would
+        // commit against RequireSession's own refusal.
+        PendingRemoteDeletion = null;
+        PendingRemoteMove = null;
+        RemoteMoveTarget = string.Empty;
+        remoteListingIsStale = false;
+
        // Same ordering reason as the raise at the end of MarkHostConnected: both properties this reads are
        // already null above, so the raise belongs after them rather than in OnIsConnectedChanged. This also
        // covers OpenBucketAsync, which calls this method first and never itself turns HasLiveFileSession on.
@@ -1911,6 +2423,9 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
                {
                    ReleaseStaged(e.Transfer.LocalPath);
                }
+
+                // Whichever pane the bytes landed in is showing that directory as it was before they did.
+                NoteTransferLanded(e.Transfer);
            }

            if (Transfers.FirstOrDefault(row => row.Id == e.Transfer.Id) is { } existing)
@@ -1961,6 +2476,10 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
        {
            IsBusy = false;
        }
+
+        // The one place every command on this screen passes through on its way out, which makes it the one
+        // place a listing that went stale while it was running can safely be settled.
+        await SettleRemoteListingAsync().ConfigureAwait(true);
    }

    partial void OnSelectedHostChanged(HostRowViewModel? value) =>
@@ -2002,7 +2521,7 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
    {
        OnPropertyChanged(nameof(CanDownload));
        OnPropertyChanged(nameof(CanUpload));
-        OnPropertyChanged(nameof(CanDeleteRemote));
+        RaiseItemActionState();

        // Both ways, and the disconnecting half is the one worth stating: closing a session puts the pane
        // back to its invitation rather than to the form, so what the pane shows after a disconnect is the
@@ -2019,14 +2538,37 @@ internal sealed partial class TransfersViewModel : ObservableObject, IAsyncDispo
    partial void OnSelectedRemoteEntryChanged(RemoteEntryRowViewModel? value)
    {
        OnPropertyChanged(nameof(CanDownload));
+        OnPropertyChanged(nameof(SelectedRemoteName));

        PendingRemoteDeletion = null;
+        PendingRemoteMove = null;
    }

    partial void OnPendingRemoteDeletionChanged(RemoteDeletionRequest? value)
    {
        OnPropertyChanged(nameof(IsConfirmingRemoteDeletion));
+        RaiseItemActionState();
+    }
+
+    partial void OnPendingRemoteMoveChanged(RemoteMoveRequest? value)
+    {
+        OnPropertyChanged(nameof(IsMovingRemote));
+        RaiseItemActionState();
+    }
+
+    /// <summary>Raises the flags the three item buttons and their two forms are drawn from.</summary>
+    /// <remarks>
+    /// Together, because they are one fact — is there a question on screen, and is anything connected —
+    /// read five ways, and a caller that raised some of them would leave a button live beside a form that
+    /// says it is not.
+    /// </remarks>
+    private void RaiseItemActionState()
+    {
+        OnPropertyChanged(nameof(IsAskingAboutRemoteEntry));
+        OnPropertyChanged(nameof(ShowsRemoteItemActions));
        OnPropertyChanged(nameof(CanDeleteRemote));
+        OnPropertyChanged(nameof(CanRenameRemote));
+        OnPropertyChanged(nameof(CanMoveRemote));
    }

    partial void OnSelectedLocalEntryChanged(LocalEntryRowViewModel? value) =>
@@ -74,16 +74,6 @@ internal sealed partial class UpdateViewModel : ObservableObject, IAsyncDisposab
    /// </remarks>
    private static readonly TimeSpan CheckInterval = TimeSpan.FromHours(6);

-    /// <summary>How long to wait before the first pass.</summary>
-    /// <remarks>
-    /// A delay, where <c>VaultViewModel</c>'s sync loop runs a pass immediately. The difference is what the
-    /// user is waiting for: a vault edited on another machine should be current by the time they have
-    /// finished reading the list, whereas nothing anybody does in their first two minutes depends on an
-    /// update. Launch is already contending for the network and the CPU with a schema migration, a resumed
-    /// sign-in and a first sync, at the one moment somebody is watching the window.
-    /// </remarks>
-    private static readonly TimeSpan FirstCheckDelay = TimeSpan.FromMinutes(2);
-
    private readonly IUpdateChannel updates;
    private readonly ClientSettingsStore settings;
    private readonly TimeProvider clock;
@@ -242,16 +232,40 @@ internal sealed partial class UpdateViewModel : ObservableObject, IAsyncDisposab
        loop = RunCheckLoopAsync(lifetime.Token);
    }

+    /// <remarks>
+    /// <para>
+    /// <b>The first pass runs at launch, with no delay in front of it.</b> It used to wait two minutes, on
+    /// the argument that nothing anybody does in their first two minutes depends on an update and launch is
+    /// already contending for the network with a schema migration, a resumed sign-in and a first sync. What
+    /// that argument leaves out is the run that is over before the two minutes are: a client opened to reach
+    /// one host and closed again never checks at all, and a machine used that way is exactly the one ADR
+    /// 0011 warns about — quietly a year behind, with the mechanism to fix it switched on and never reached.
+    /// Every start now asks.
+    /// </para>
+    /// <para>
+    /// <b>The yield is what keeps that off the launch path.</b> <see cref="Start"/> is called from
+    /// <c>MainWindowViewModel.StartAsync</c> before the migration, so running the pass inline would put
+    /// whatever the channel does before its own first await — Velopack reads the install layout from disk —
+    /// between the user and their window. Yielding hands the rest of the launch back and lets the check run
+    /// in a later turn, which is the same moment in every sense that matters and none of the cost.
+    /// </para>
+    /// </remarks>
    private async Task RunCheckLoopAsync(CancellationToken cancellationToken)
    {
        try
        {
-            await Task.Delay(FirstCheckDelay, clock, cancellationToken).ConfigureAwait(true);
+            await Task.Yield();

            using var timer = new PeriodicTimer(CheckInterval, clock);

            do
            {
+                // Task.Yield takes no token, unlike the delay it replaced, so a shutdown that lands while
+                // the loop is waiting to be handed back the thread has to be observed here rather than
+                // only at the next tick. Otherwise an application closed during launch spends its last
+                // moment asking a release channel about a build it is not going to run.
+                cancellationToken.ThrowIfCancellationRequested();
+
                await CheckOnceAsync(cancellationToken).ConfigureAwait(true);
            }
            while (await timer.WaitForNextTickAsync(cancellationToken).ConfigureAwait(true));
@@ -943,6 +943,31 @@ internal sealed class ConnectionAttemptEventArgs(Guid attemptId, string label, s
    internal string Address { get; } = address;
 }

+/// <summary>A connection that has got as far as a named step.</summary>
+/// <param name="attemptId">The attempt this is about.</param>
+/// <param name="step">The step that has just begun.</param>
+/// <remarks>
+/// <para>
+/// The fourth of the attempt events, and the only one that can be raised more than once for an attempt. It
+/// exists because the other three say a connection started and then, seconds later, whether it worked — and
+/// the seconds in between are the whole of what a user staring at a connecting card is trying to find out.
+/// </para>
+/// <para>
+/// <b>Raised on whichever thread the handshake is on.</b> SSH.NET reports the interior of a connection from
+/// its own thread, and this event is that report forwarded rather than a copy made on a timer, so a
+/// subscriber that touches a view model must marshal for itself. <c>MainWindowViewModel</c> does; see the
+/// handler.
+/// </para>
+/// </remarks>
+internal sealed class ConnectionProgressEventArgs(Guid attemptId, ConnectionStep step) : EventArgs
+{
+    /// <inheritdoc cref="ConnectionAttemptEventArgs.AttemptId" />
+    internal Guid AttemptId { get; } = attemptId;
+
+    /// <inheritdoc cref="ConnectionProgressEventArgs" path="/param[@name='step']" />
+    internal ConnectionStep Step { get; } = step;
+}
+
 /// <summary>A connection that was asked for and did not happen.</summary>
 /// <param name="attemptId">The attempt that has just ended.</param>
 /// <param name="reason">What to say about it, in the tab.</param>
@@ -3086,6 +3111,37 @@ internal sealed partial class VaultViewModel(
    [ObservableProperty]
    private AuthenticationChoice? editorSelectedAuthentication;

+    // ---- Making a credential from inside the host editor ----
+    // A fifth set of editor fields, and deliberately not the keychain screen's four. Sharing them would put
+    // IsEditingCredential — which AVaultEditorIsInTheWay asks about — true while the user is on the Hosts
+    // screen, and the whole Vault screen would refuse to open an editor with a sentence naming a form on
+    // another screen. That is the exact failure AHostEditorIsInTheWay was split out to end; see its remarks.
+
+    /// <summary>Whether the host editor is showing its own new-credential form.</summary>
+    [ObservableProperty]
+    private bool isAddingEditorCredential;
+
+    /// <summary>The name in the host editor's new-credential form.</summary>
+    [ObservableProperty]
+    private string editorNewCredentialLabel = string.Empty;
+
+    /// <inheritdoc cref="CredentialEditorUsername" path="/remarks" />
+    [ObservableProperty]
+    private string editorNewCredentialUsername = string.Empty;
+
+    /// <remarks>
+    /// Holds a password for as long as the form is open, on the same terms the keychain's box does — see
+    /// <see cref="CredentialEditorPassword"/>. Cleared by every path that closes this form, including the
+    /// ones that close the host editor around it, so a password typed here cannot outlive the form and
+    /// reappear behind the next host somebody edits.
+    /// </remarks>
+    [ObservableProperty]
+    private string editorNewCredentialPassword = string.Empty;
+
+    /// <summary>Free text, as the keychain's own editor takes.</summary>
+    [ObservableProperty]
+    private string editorNewCredentialNotes = string.Empty;
+
    /// <summary>What the group picker offers: "no group", then every group of the chosen vault.</summary>
    /// <inheritdoc cref="EditorAuthenticationChoices" path="/remarks" />
    internal ObservableCollection<GroupChoice> EditorGroupChoices { get; } = [];
@@ -3357,6 +3413,121 @@ internal sealed partial class VaultViewModel(
        OnPropertyChanged(nameof(HasTagChoices));
    }

+    /// <summary>
+    /// Opens the host editor's own new-credential form.
+    /// </summary>
+    /// <remarks>
+    /// A button beside the picker rather than an entry inside it. Every row of that list is a binding the
+    /// host can have — see <see cref="AuthenticationChoice"/> — and "make a new one" is an action, not a
+    /// binding: as an entry it would sit in the box afterwards describing a state no host can be in, and
+    /// cancelling the form would leave the picker showing it.
+    /// </remarks>
+    [RelayCommand]
+    private void BeginEditorCredential()
+    {
+        ClearEditorCredentialForm();
+        IsAddingEditorCredential = true;
+        Status = "Adding a credential for this host.";
+    }
+
+    /// <summary>Abandons the form, clearing the password out of it.</summary>
+    [RelayCommand]
+    private void CancelEditorCredential()
+    {
+        ClearEditorCredentialForm();
+        Status = string.Empty;
+    }
+
+    /// <summary>Closes the form and drops what was typed into it, the password included.</summary>
+    private void ClearEditorCredentialForm()
+    {
+        IsAddingEditorCredential = false;
+        EditorNewCredentialLabel = string.Empty;
+        EditorNewCredentialUsername = string.Empty;
+        EditorNewCredentialPassword = string.Empty;
+        EditorNewCredentialNotes = string.Empty;
+    }
+
+    /// <summary>
+    /// Creates a credential from the host editor's form and binds the host being edited to it.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The same reasoning <see cref="AddEditorTagAsync"/> gives, and for the same moment: somebody is
+    /// choosing how a host authenticates and finds the password they want is not in the keychain yet.
+    /// Sending them to the other screen to make one would lose the half-typed host they were standing in.
+    /// </para>
+    /// <para>
+    /// <b>It writes to the keychain immediately, unlike every other field in this editor.</b> A credential
+    /// is a shared item with an id and a host can only name an id that exists, so there is nothing to defer.
+    /// Cancelling the host edit therefore leaves the credential behind — honest rather than hidden, and the
+    /// bargain a tag already makes here.
+    /// </para>
+    /// <para>
+    /// <b>A name that already exists is duplicated rather than reused, which is where this deliberately
+    /// parts from the tag path.</b> Two tags called "staging" are the same intention spelled twice; two
+    /// credentials called "root" are two different passwords, and quietly binding the host to the one that
+    /// happened to be there already would authenticate it as an account the user never chose. A duplicate
+    /// label in the picker is a smaller problem than a silent wrong password.
+    /// </para>
+    /// <para>
+    /// Into <see cref="editingHostVaultId"/>, not the standing target: the credential belongs wherever the
+    /// host is being sealed, so everybody who can read the host can read what it authenticates with. That is
+    /// stricter than the tag path — which files into the active vault and is recorded as a gap — and it can
+    /// be, because the picker here lists credentials from every readable vault rather than one.
+    /// </para>
+    /// </remarks>
+    [RelayCommand]
+    private async Task AddEditorCredentialAsync(CancellationToken cancellationToken)
+    {
+        var credential = new CredentialSecret
+        {
+            Label = EditorNewCredentialLabel.Trim(),
+
+            // Not trimmed. A password of spaces is a password — CredentialSecret.TryValidate says so — and
+            // trimming one here would lock somebody out of a host over a tidiness opinion.
+            Password = EditorNewCredentialPassword,
+            Username = string.IsNullOrWhiteSpace(EditorNewCredentialUsername)
+                ? null
+                : EditorNewCredentialUsername.Trim(),
+
+            // Untrimmed and unnormalised past blank-is-absent, as the keychain's editor writes it: free text
+            // is the user's to lay out, and its leading indent is theirs rather than this form's to correct.
+            Notes = string.IsNullOrWhiteSpace(EditorNewCredentialNotes) ? null : EditorNewCredentialNotes,
+        };
+
+        if (!credential.TryValidate(out var reason))
+        {
+            Status = reason;
+            return;
+        }
+
+        await RunAsync(
+            "Saving…",
+            async () =>
+            {
+                var entityId = await session.Credentials
+                    .CreateAsync(editingHostVaultId, credential, cancellationToken)
+                    .ConfigureAwait(true);
+
+                // Before the reload, not after it. RefreshOpenEditors rebuilds this picker and then restores
+                // it from whatever this property says, so writing the binding here is what survives the pass
+                // — and by the time it is read, ReloadCredentialsAsync has put the matching entry in the
+                // list for it to land on.
+                EditorSelectedAuthentication =
+                    AuthenticationChoice.ForCredential(entityId, credential.Label);
+
+                ClearEditorCredentialForm();
+
+                await ReloadAsync(cancellationToken).ConfigureAwait(true);
+
+                Status = $"Added '{credential.Label}' and bound this host to it. "
+                    + "Save the host to keep the binding.";
+            }).ConfigureAwait(true);
+
+        await AutoSyncAsync(cancellationToken).ConfigureAwait(true);
+    }
+
    /// <summary>
    /// The paths pinned on the host being edited, in the order QUICK ACCESS draws them.
    /// </summary>
@@ -3981,6 +4152,15 @@ internal sealed partial class VaultViewModel(
    /// </remarks>
    internal event EventHandler<ConnectionAttemptEventArgs>? ConnectionStarting;

+    /// <summary>Raised as a connection this vault announced gets from one step to the next.</summary>
+    /// <remarks>
+    /// Between <see cref="ConnectionStarting"/> and whichever of the other two ends the attempt, any number
+    /// of times including none — a handshake fast enough to finish inside one turn reports nothing, which is
+    /// the honest account of it. See <see cref="ConnectionProgressEventArgs"/> for the threading, which is
+    /// the one way this event differs from its three neighbours.
+    /// </remarks>
+    internal event EventHandler<ConnectionProgressEventArgs>? ConnectionProgress;
+
    /// <summary>Raised when a connection this vault announced does not become a session.</summary>
    /// <inheritdoc cref="ConnectionStarting" path="/remarks" />
    internal event EventHandler<ConnectionFailedEventArgs>? ConnectionFailed;
@@ -7092,6 +7272,9 @@ internal sealed partial class VaultViewModel(
        EditorPinnedPaths.Clear();
        EditorNewPin = string.Empty;

+        // Closed rather than carried over, and it holds a password — see EditorNewCredentialPassword.
+        ClearEditorCredentialForm();
+
        // Before the group picker, because a group belongs to one vault and the picker is that vault's.
        BuildEditorVaultChoices(editingHostVaultId);

@@ -7177,6 +7360,9 @@ internal sealed partial class VaultViewModel(
        EditorNewTag = string.Empty;
        BuildTagChoices();

+        // As in NewHost, and for the password it can be holding.
+        ClearEditorCredentialForm();
+
        LoadEditorPinnedPaths(row.Host.PinnedPaths);

        BuildEditorVaultChoices(editingHostVaultId);
@@ -8037,6 +8223,10 @@ internal sealed partial class VaultViewModel(
    {
        IsEditing = false;
        editingEntityId = null;
+
+        // The form goes with the editor it lives in, password and all. A credential already added through it
+        // stays in the keychain — see AddEditorCredentialAsync — but what was still being typed does not.
+        ClearEditorCredentialForm();
        Status = string.Empty;
    }

@@ -8070,6 +8260,10 @@ internal sealed partial class VaultViewModel(
                }

                IsEditing = false;
+
+                // As CancelEdit does, for the same password.
+                ClearEditorCredentialForm();
+
                await ReloadAsync(cancellationToken).ConfigureAwait(true);

                SelectedHost = Hosts.FirstOrDefault(row => row.EntityId == editingEntityId);
@@ -10729,6 +10923,53 @@ internal sealed partial class VaultViewModel(
        return true;
    }

+    /// <summary>Turns the handshake's phases into this attempt's progress events.</summary>
+    /// <remarks>
+    /// <para>
+    /// Forwarded rather than accumulated, because the tab is the thing that knows what has already happened
+    /// and this object deliberately does not: a connection here is one straight line from renderer to
+    /// session, and a running total of where it had got to would be a second copy of the state the card
+    /// already draws from the first.
+    /// </para>
+    /// <para>
+    /// <b>Deliberately not <c>System.Progress&lt;T&gt;</c></b>, which captures whatever synchronisation
+    /// context it happens to be constructed on and posts to it. That reads like a convenience and is really
+    /// a second place the marshalling decision gets made: silently, differently under a test with no
+    /// context, and — because a post is a later turn — out of order with respect to the failure or the
+    /// session that follows the phase. Raised inline instead, and the shell marshals once where it can be
+    /// seen. See <c>MainWindowViewModel.OnVaultConnectionProgress</c>.
+    /// </para>
+    /// </remarks>
+    private PhaseReporter ReporterFor(ConnectionAttemptEventArgs attempt) => new(phase =>
+        ConnectionProgress?.Invoke(this, new ConnectionProgressEventArgs(attempt.AttemptId, StepFor(phase))));
+
+    /// <summary>The step a handshake phase is reported to the shell as.</summary>
+    /// <remarks>
+    /// The whole of the mapping between the SSH assembly's four phases and the card's five steps, in one
+    /// place. <see cref="ConnectionStep.PreparingTerminal"/> is not here because nothing reports it: the tab
+    /// starts on it, and the first phase to arrive is what closes it.
+    /// </remarks>
+    private static ConnectionStep StepFor(SshConnectionPhase phase) => phase switch
+    {
+        SshConnectionPhase.Reaching => ConnectionStep.Reaching,
+        SshConnectionPhase.CheckingHostKey => ConnectionStep.CheckingHostKey,
+        SshConnectionPhase.Authenticating => ConnectionStep.Authenticating,
+        SshConnectionPhase.OpeningShell => ConnectionStep.OpeningShell,
+        _ => ConnectionStep.Reaching,
+    };
+
+    /// <summary>Hands each phase straight to a delegate, on the thread that reported it.</summary>
+    /// <remarks>
+    /// The whole type, and it exists to be the thing <c>System.Progress&lt;T&gt;</c> is not — see the remark
+    /// at its one use. A lambda cannot implement an interface, and the alternative was widening the
+    /// workspace's parameter to <c>Action&lt;T&gt;</c>, which would have put a non-standard progress
+    /// contract into three assemblies to save one class here.
+    /// </remarks>
+    private sealed class PhaseReporter(Action<SshConnectionPhase> report) : IProgress<SshConnectionPhase>
+    {
+        public void Report(SshConnectionPhase value) => report(value);
+    }
+
    /// <summary>What a manual target reads as, once it has been taken apart.</summary>
    /// <remarks>
    /// Separate from <see cref="ConnectionTarget"/> because a keychain host has no username of its own at
@@ -11006,10 +11247,7 @@ internal sealed partial class VaultViewModel(
        }
        catch (TimeoutException)
        {
-            Abandon(
-                attempt,
-                "The terminal did not start, so nothing was connected. The Microsoft Edge WebView2 "
-                + "runtime is probably missing or blocked; install it and try again.");
+            Abandon(attempt, RendererNeverStarted);
        }
        catch (SshHostKeyUnknownException exception)
        {
@@ -11034,6 +11272,29 @@ internal sealed partial class VaultViewModel(
        }
    }

+    /// <summary>What a renderer that never attached is reported as.</summary>
+    /// <remarks>
+    /// <para>
+    /// The wait is translated rather than reported for the reason <see cref="OpenSessionAsync"/> gives —
+    /// <see cref="TimeoutException"/> says only "The operation has timed out" — and the whole value of the
+    /// translation is naming where to look. Which is why it cannot be one sentence: the desktop's answer is
+    /// a runtime this application does not install, and the phone has no such runtime and no such answer.
+    /// Telling somebody on a handset to install Microsoft Edge WebView2 is worse than saying nothing, at the
+    /// one moment they are trying to work out what went wrong.
+    /// </para>
+    /// <para>
+    /// A runtime check rather than a constructor parameter, for the reason
+    /// <c>MainWindowViewModel.GestureWait</c> records at length: which renderer is behind the terminal is a
+    /// fact about the platform this assembly is running on, not about one installation of it.
+    /// </para>
+    /// </remarks>
+    private static string RendererNeverStarted =>
+        OperatingSystem.IsAndroid()
+            ? "The terminal did not start, so nothing was connected. Android's WebView is probably "
+                + "disabled or updating; check it in Settings and try again."
+            : "The terminal did not start, so nothing was connected. The Microsoft Edge WebView2 "
+                + "runtime is probably missing or blocked; install it and try again.";
+
    /// <summary>Says, in one place, that an attempt ended without a session and why.</summary>
    /// <remarks>
    /// The reason goes to two places on purpose. The status line is where somebody watching this screen is
@@ -11078,6 +11339,8 @@ internal sealed partial class VaultViewModel(
        HostAuthentication authentication,
        CancellationToken cancellationToken)
    {
+        // Not reported before the await: the tab is constructed with this step already running — see
+        // TerminalTabViewModel — because there is no moment between the two worth telling anybody about.
        await workspace.WaitForRendererAsync(cancellationToken).ConfigureAwait(true);

        var request = new SshConnectionRequest(
@@ -11087,7 +11350,7 @@ internal sealed partial class VaultViewModel(
            authentication.Credential);

        var sessionId = await workspace
-            .OpenSessionAsync(request, TerminalSize.Default, cancellationToken)
+            .OpenSessionAsync(request, TerminalSize.Default, ReporterFor(attempt), cancellationToken)
            .ConfigureAwait(true);

        // The workspace has already opened a ticket for this session, with the address and the moment it
@@ -78,6 +78,50 @@ body {
  height: 100%;
 }

+/*
+  ── THE BLACK STRIP UNDER THE TERMINAL ───────────────────────────────────────────────────────────────
+  xterm.css paints its scrolling viewport #000 — literally black, and its own comment says why: on macOS
+  the overlay scrollbar is only fully opaque over an opaque backdrop. Everywhere else that black is a
+  surface nobody sees, because the rows cover it — except along the bottom, where they do not. The fit
+  addon floors the row count, so whatever is left of the pane below the last whole row is viewport with
+  nothing drawn on it: a full-width black bar under the terminal, up to one line tall, against this
+  page's own #171a26. On Windows it is also where the classic scrollbar's bottom corner lands, which is
+  the light square at its right-hand end.
+
+  Repainting it in the page's own background is the whole fix. The remainder is still there — it is the
+  cost of a grid that has to divide evenly — but it now reads as the terminal's own margin rather than
+  as a strip of chrome that belongs to something else.
+*/
+.xterm .xterm-viewport {
+  background-color: var(--dodo-background);
+
+  /*
+    And the scrollbar itself, which WebView2 draws in the classic Windows style: a 15-pixel light-grey
+    channel with arrow buttons, down the right of a near-black terminal. Thin and in this page's own
+    colours instead — kept rather than hidden, because the scrollback is real and a surface that scrolls
+    with no sign that it does is worse than a quiet bar saying where you are.
+
+    Both spellings. scrollbar-width/-color is the standard one and is what current WebView2 and WebKitGTK
+    honour; ::-webkit-scrollbar is what older Chromium builds and WKWebView answer to. Neither is
+    load-bearing on its own and the two do not conflict — whichever the host understands wins.
+  */
+  scrollbar-width: thin;
+  scrollbar-color: color-mix(in srgb, var(--dodo-muted) 45%, transparent) transparent;
+}
+
+.xterm .xterm-viewport::-webkit-scrollbar {
+  width: 9px;
+}
+
+.xterm .xterm-viewport::-webkit-scrollbar-track {
+  background: transparent;
+}
+
+.xterm .xterm-viewport::-webkit-scrollbar-thumb {
+  background: color-mix(in srgb, var(--dodo-muted) 45%, transparent);
+  border-radius: 5px;
+}
+
 #status {
  position: absolute;
  left: 0;
@@ -16,7 +16,8 @@
     happened to straddle a frame boundary, which shows up as occasional mojibake in exactly the
     conditions that are hardest to reproduce.

-  3. The socket reconnects itself, forever, with backoff. This page's WebView is routinely killed
+  3. The socket reconnects itself, forever, with backoff — and on being looked at again, which is not
+     the same thing and is the half a timer cannot cover. This page's WebView is routinely killed
     and reloaded by Android under memory pressure or simply for being backgrounded, so "the
     socket closed" is an ordinary event here, not the end of the terminal's life — see connect().
     A reloaded page starts with an empty session map, so createSession is idempotent (a session
@@ -52,6 +53,22 @@ const SCROLLBACK_LINES = 5000;
 const RECONNECT_INITIAL_DELAY_MS = 1000;
 const RECONNECT_MAX_DELAY_MS = 5000;

+/*
+  How long a socket is given to finish its handshake before it is treated as a failure.
+
+  A socket that cannot connect normally says so and says it quickly — 'error' then 'close', within a
+  millisecond or two of a loopback refusal. The case this covers is the one that says nothing: an attempt
+  parked in CONNECTING with no event ever coming, which is what a WebSocket opened by a renderer that is
+  then suspended, or one whose handshake the host never answers, leaves this page holding.
+
+  Without the watchdog that state is terminal, and quietly so. Every retry in this file is scheduled by a
+  close or an error, so an attempt that produces neither schedules nothing: the banner says the view is
+  reconnecting for the rest of the page's life while nothing whatever is reconnecting. Five seconds is
+  generous against a handshake that ordinarily takes about a millisecond, and short against somebody
+  waiting on their terminal to come back.
+*/
+const HANDSHAKE_TIMEOUT_MS = 5000;
+
 /*
  Styled like the SESSION_CLOSED banner (matching \x1b[38;5;244, the same dim grey), but written by
  createSession's caller rather than by createSession itself: only a *replay* landing on a pane that
@@ -84,14 +101,57 @@ const RELEASE_FOCUS_MESSAGE = 'dodossh.release-focus';
 const root = document.getElementById('root');
 const statusBanner = document.getElementById('status');

-/** @type {Map<number, {term: object, fit: object, pane: HTMLElement}>} */
+/** @type {Map<number, {term: object, fit: object, pane: HTMLElement, notice: string}>} */
 const sessions = new Map();

 /** @type {WebSocket | null} */
 let socket = null;

-function setStatus(text) {
-  statusBanner.textContent = text ?? '';
+/** Whose pane is showing, or null before there is one — see activate(). */
+let activeSessionId = null;
+
+/*
+  ── THE BANNER BELONGS TO ONE PANE AT A TIME ─────────────────────────────────────────────────────────
+  There is one #status element for the whole page, because there is one page for every terminal: the
+  panes are stacked in the same box and all but the active one are hidden. What goes in it comes from
+  two sources that are not the same size, and the difference is the whole of this.
+
+  The socket's troubles are the page's. There is a single socket behind every pane, so "the view is
+  reconnecting" is true of whatever is on screen and true of the panes behind it.
+
+  A session's last words are not. "The remote closed the session." is a fact about one terminal and says
+  nothing whatever about the others — so it is held on the session and drawn only while that session's
+  pane is the one showing. Written straight into the shared element, which is what this used to do, it
+  outlived the tab it described: switching to a live terminal left the dead one's epitaph sitting under
+  it, and opening or closing any other tab wiped the message whether or not it belonged to that tab.
+
+  The socket's half wins when both have something to say: a page whose socket is down is not showing
+  live output on any pane, which makes what became of one session the less urgent of the two.
+*/
+let transportStatus = statusBanner.textContent ?? '';
+
+function renderStatus() {
+  const notice = activeSessionId === null ? '' : sessions.get(activeSessionId)?.notice ?? '';
+
+  statusBanner.textContent = transportStatus || notice;
+}
+
+/** Says something about the socket, which every pane shares. */
+function setTransportStatus(text) {
+  transportStatus = text ?? '';
+  renderStatus();
+}
+
+/** Records what became of one session, to be drawn only while that session's pane is showing. */
+function setSessionNotice(sessionId, text) {
+  const session = sessions.get(sessionId);
+
+  if (!session) {
+    return;
+  }
+
+  session.notice = text ?? '';
+  renderStatus();
 }

 /** Builds a frame: opcode, big-endian session id, then payload. */
@@ -255,8 +315,31 @@ function createSession(sessionId) {
  // WebGL where it is available. Falling back rather than failing matters because a software
  // renderer is slow but usable, whereas a blank pane is not — and remote desktops and VMs
  // routinely have no usable GPU context.
+  //
+  // ◆ THE CONTEXT-LOSS HANDLER IS THE HALF THAT WAS MISSING, AND ON A PHONE IT IS THE WHOLE THING.
+  //
+  // The addon does not recover from a lost GPU context by itself, and it does not fail loudly either:
+  // it stays loaded over a dead context and draws nothing at all. What that looks like from outside is
+  // a terminal that is connected, still accepting keystrokes, still acknowledging output — and blank.
+  // xterm's own guidance is to dispose the addon and let the DOM renderer take over, which is what this
+  // does; the addon is not reloaded afterwards, because a pane that lost the context once is on a
+  // surface that will do it again and thrashing between renderers is worse than being slow.
+  //
+  // Losing it is ordinary on Android and nearly unheard of on Windows, which is why this went unnoticed
+  // for so long. Collapsing the renderer sets the native view to GONE — see
+  // AndroidNativeControlHostImpl.HideWithSize — and a WebView with no surface has no GL context. The
+  // shell collapses it every time a tab starts connecting, every time the connect sheet opens and every
+  // time the app is backgrounded, so on a phone the first loss arrives within seconds of the first
+  // session. WebView2 hides a child HWND instead and keeps rendering throughout; see
+  // docs/platform-flags.md.
  try {
-    term.loadAddon(new WebglAddon.WebglAddon());
+    const webgl = new WebglAddon.WebglAddon();
+
+    // Subscribed before loadAddon, because loadAddon is what activates the addon and a context that is
+    // already gone can be reported from inside that call.
+    webgl.onContextLoss(() => webgl.dispose());
+
+    term.loadAddon(webgl);
  } catch (error) {
    console.warn('WebGL renderer unavailable; falling back to canvas.', error);
  }
@@ -269,7 +352,7 @@ function createSession(sessionId) {

  term.onResize(() => sendResize(sessionId, term, pane));

-  const session = { term, fit, pane };
+  const session = { term, fit, pane, notice: '' };
  sessions.set(sessionId, session);

  activate(sessionId);
@@ -283,6 +366,11 @@ function activate(sessionId) {
    session.pane.dataset.active = String(id === sessionId);
  }

+  // The banner follows the pane. Whatever this session has to say for itself replaces whatever the
+  // session that was showing had to say for its own, which is the point of holding it per session.
+  activeSessionId = sessionId;
+  renderStatus();
+
  const active = sessions.get(sessionId);
  if (active) {
    active.term.focus();
@@ -296,10 +384,17 @@ function activate(sessionId) {
 // caller, because more than one path reaches here: a minimised window, and a splitter dragged to the edge
 // once splits land.
 //
-// It is *not* what protects the vault's lock screen, which an earlier version of this comment claimed.
-// Collapsing the host's WebView hides a native child window without resizing it, so this page's viewport
-// does not change, no observer fires and this function is never called — measured with a live shell, and
-// confirmed by removing the guard and finding the lock cycle equally clean. See docs/platform-flags.md.
+// It is *not* what protects the vault's lock screen on the desktop, which an earlier version of this
+// comment claimed. Collapsing WebView2 hides a native child window without resizing it, so this page's
+// viewport does not change, no observer fires and this function is never called — measured with a live
+// shell, and confirmed by removing the guard and finding the lock cycle equally clean. See
+// docs/platform-flags.md.
+//
+// On the phone it *is* load-bearing, and that is the one place the two heads differ here. Android hides a
+// native child by setting it GONE, and a GONE view is skipped by its parent's layout — so collapsing the
+// renderer really does take this page's viewport to nothing, the observer really does fire, and without
+// the guard every lock, every connect sheet and every trip to the background would reflow the remote pty
+// to 2x1 and mangle the scrollback it wrapped.
 const MINIMUM_FITTABLE_PIXELS = 40;

 function resize(session, sessionId) {
@@ -343,7 +438,10 @@ function handleFrame(buffer) {
        session.term.write(REPLAY_BANNER);
      }

-      setStatus('');
+      // This session's own line, and only this one's: a session that is open has nothing to say about
+      // how it ended. The page's own "Connecting…" is cleared by the socket opening, which happens
+      // before any frame can arrive.
+      setSessionNotice(sessionId, '');
      break;
    }

@@ -396,7 +494,14 @@ function handleFrame(buffer) {
      session.pane.remove();
      sessions.delete(sessionId);

-      setStatus('');
+      // The notice went with the session record it was held on, but the page can still be pointing at
+      // the pane that is now gone. Cleared rather than left dangling, so the banner stops describing a
+      // closed tab while the host decides which pane to show next.
+      if (activeSessionId === sessionId) {
+        activeSessionId = null;
+      }
+
+      renderStatus();
      break;
    }

@@ -417,8 +522,23 @@ function handleFrame(buffer) {
        is something only this page sees — and a shell that receives a multi-line command inside those
        markers treats every newline as text. Without them it treats each one as "run this", so a
        three-line snippet runs three commands the moment it is inserted.
+
+        ◆ ONE LINE IS TYPED INSTEAD, and this is not an optimisation. Bracketed paste is what readline
+        uses to decide it has been pasted into, and bash marks the result as an active region: the
+        inserted command sits at the prompt in reverse video, looking selected, until the next
+        keystroke clears it. That is right for a paste somebody made with the clipboard and wrong for a
+        snippet they picked off the sidebar, which should read as though they had typed it.
+
+        The markers are only load-bearing for text carrying a newline — that is the whole of what the
+        paragraph above protects against — so a single-line snippet does not need them and is written
+        as keystrokes. Multi-line still pastes, highlight and all, because "runs three commands
+        unasked" is the worse of the two.
      */
-      session.term.paste(text);
+      if (text.includes('\n') || text.includes('\r')) {
+        session.term.paste(text);
+      } else {
+        session.term.input(text);
+      }

      /*
        And the Enter goes through input(), deliberately outside that wrapper. A '\r' appended to the
@@ -430,6 +550,15 @@ function handleFrame(buffer) {
        session.term.input('\r');
      }

+      /*
+        The caret goes back where the text landed. Half of it, anyway: this reaches
+        document.activeElement and nothing further, so it is what makes the pane the page's own focused
+        element and what stops a hidden textarea from keeping the caret. The other half is Win32
+        focus — the sidebar row that sent this frame took it — and only the host can give that back;
+        see MainWindowViewModel.TerminalFocusRequested and MainWindow's own FocusTerminalWhenLaidOut.
+      */
+      session.term.focus();
+
      break;
    }

@@ -449,14 +578,19 @@ function handleFrame(buffer) {
      const session = sessions.get(sessionId);
      const reason = new TextDecoder().decode(payload);

-      if (session) {
-        // The pane and its scrollback stay. The user was probably reading the last thing the
-        // remote said, and that is usually why the session ended.
-        session.term.write(`\r\n\x1b[38;5;244m── ${reason} ──\x1b[0m\r\n`);
-        session.term.options.cursorBlink = false;
+      if (!session) {
+        // No pane, so there is nothing this page can honestly hang the reason on. It used to go into
+        // the banner anyway, which printed one session's ending underneath whichever pane happened to
+        // be showing at the time.
+        break;
      }

-      setStatus(reason);
+      // The pane and its scrollback stay. The user was probably reading the last thing the
+      // remote said, and that is usually why the session ended.
+      session.term.write(`\r\n\x1b[38;5;244m── ${reason} ──\x1b[0m\r\n`);
+      session.term.options.cursorBlink = false;
+
+      setSessionNotice(sessionId, reason);
      break;
    }

@@ -466,8 +600,47 @@ function handleFrame(buffer) {
  }
 }

+/*
+  ── THE SOCKET COMES BACK BY ITSELF, INCLUDING FOR A PAGE NOBODY HAS LOOKED AT IN AN HOUR ────────────
+
+  Retrying on a timer is the easy half and was the whole of this. The three rules below are what make the
+  retry actually reach a page that has been sitting collapsed — each of them a way this page was found
+  showing "Reconnecting the terminal view…" over a socket that nothing was reconnecting.
+
+  1. ONLY THE CURRENT ATTEMPT'S EVENTS COUNT. connect() abandons whatever socket was attached before it,
+     and an abandoned socket still reports its end: the host aborts it the moment the newcomer upgrades,
+     which is TerminalDataPlane.UpgradeAsync's takeover doing exactly what it is meant to. Counting that
+     close as a fresh failure schedules a retry against a socket that has just succeeded, and the
+     takeover then aborts *that* one, whose close schedules the next — a loop with no fixed point, in
+     which the terminal reconnects every second or so forever and the banner is up for most of it. Every
+     handler below asks whether it is still the page's socket before it does anything.
+
+  2. AN ATTEMPT THAT NEVER FINISHES IS A FAILURE TOO. See HANDSHAKE_TIMEOUT_MS.
+
+  3. COMING BACK IS A REASON TO TRY, NOT ONLY THE CLOCK. The retry is a setTimeout chain, and a chain is
+     precisely what a WebView is entitled to stop running. Chromium throttles timers in a page nobody is
+     looking at — down to once a minute once it has been hidden five minutes — and a renderer that is
+     frozen, or reclaimed and not yet reloaded, runs none of them at all. So the socket drops while nobody
+     is watching, the banner goes up, the retry is scheduled, and the retry is then the one thing not
+     running: coming back shows a terminal that says it is reconnecting and, for as long as that lasts,
+     is not.
+
+     The phone is where this is easiest to reach, because leaving the terminal for another screen
+     collapses its WebView to GONE — see createSession's note on the GPU context — and a WebView with no
+     surface is a page the platform may treat as hidden. Which of the two mechanisms actually bit is not
+     established here, and does not need to be: both end with a timer that will not run, and the fix is
+     not to guess at either but to stop depending on the timer alone.
+
+     Hence the wake-ups at the bottom of this file. What they add is not a faster retry; it is a retry
+     driven by the one thing that cannot be throttled, which is the user arriving.
+*/
+
 /** @type {number | null} */
 let reconnectTimer = null;
+
+/** @type {number | null} */
+let handshakeTimer = null;
+
 let reconnectDelay = RECONNECT_INITIAL_DELAY_MS;

 /**
@@ -481,7 +654,7 @@ function scheduleReconnect() {
    return;
  }

-  setStatus('Reconnecting the terminal view…');
+  setTransportStatus('Reconnecting the terminal view…');

  reconnectTimer = setTimeout(() => {
    reconnectTimer = null;
@@ -491,31 +664,112 @@ function scheduleReconnect() {
  reconnectDelay = Math.min(reconnectDelay * 2, RECONNECT_MAX_DELAY_MS);
 }

+/**
+ * Tries the socket again now, if it is down.
+ *
+ * The entry point for "somebody is looking at this page again", and it has to be safe to call as often
+ * as that happens — which on the desktop is every time the window is clicked. A socket that is up makes
+ * this nothing at all.
+ *
+ * An attempt still in CONNECTING is left alone rather than restarted: it may be about to succeed, and
+ * the one that is not is already the handshake watchdog's to give up on.
+ */
+function reconnectIfDown() {
+  if (socket !== null
+    && (socket.readyState === WebSocket.OPEN || socket.readyState === WebSocket.CONNECTING)) {
+    return;
+  }
+
+  // Whatever the timer was going to do, this is doing now. Left pending it would land on top of the
+  // socket this call is about to open, and the takeover that followed is the loop rule 1 describes.
+  if (reconnectTimer !== null) {
+    clearTimeout(reconnectTimer);
+    reconnectTimer = null;
+  }
+
+  // Back to the quick attempt. The wait grew to space out retries during an outage nobody was watching,
+  // and being called at all means somebody is watching now.
+  reconnectDelay = RECONNECT_INITIAL_DELAY_MS;
+
+  connect();
+}
+
 function connect() {
  const token = root.dataset.token;
  const url = root.dataset.socket;

+  /*
+    Whatever was attached is abandoned here, and closed rather than dropped: the host takes the socket
+    over regardless, but one left open is a connection it has to abort and an event this page then has to
+    ignore. Cleared out of `socket` before the close, so that every handler — including that close,
+    whenever it lands — can already tell the attempt is no longer the page's.
+  */
+  const abandoned = socket;
+  socket = null;
+  abandoned?.close();
+
  // The token travels as a subprotocol rather than a query parameter, which keeps it out of
  // anything that logs URLs.
-  socket = new WebSocket(url, ['dodossh.terminal.v1', `token.${token}`]);
-  socket.binaryType = 'arraybuffer';
+  const pending = new WebSocket(url, ['dodossh.terminal.v1', `token.${token}`]);
+  pending.binaryType = 'arraybuffer';
+  socket = pending;

-  socket.addEventListener('open', () => {
-    setStatus('');
+  /** Whether this attempt is still the page's, rather than one a later connect() has replaced. */
+  const isCurrent = () => socket === pending;
+
+  const forgetHandshakeTimer = () => {
+    if (handshakeTimer !== null) {
+      clearTimeout(handshakeTimer);
+      handshakeTimer = null;
+    }
+  };
+
+  forgetHandshakeTimer();
+
+  handshakeTimer = setTimeout(() => {
+    handshakeTimer = null;
+
+    // Still CONNECTING with nothing on its way. Only the retry is arranged here; abandoning the attempt
+    // is left to the connect() that retry runs, which is the one place a socket is replaced.
+    if (isCurrent() && pending.readyState === WebSocket.CONNECTING) {
+      scheduleReconnect();
+    }
+  }, HANDSHAKE_TIMEOUT_MS);
+
+  pending.addEventListener('open', () => {
+    // A replaced attempt cannot reach here — connect() closes what it abandons, and a socket closed
+    // while connecting never opens — so this is a guard against the ordering rather than a live case.
+    if (!isCurrent()) {
+      return;
+    }
+
+    forgetHandshakeTimer();
+    setTransportStatus('');

    // Back to the quick attempt for whatever the next failure turns out to be. Kept slow between
    // attempts within one outage, reset once the outage is actually over.
    reconnectDelay = RECONNECT_INITIAL_DELAY_MS;
  });

-  socket.addEventListener('message', (event) => handleFrame(event.data));
+  pending.addEventListener('message', (event) => {
+    if (isCurrent()) {
+      handleFrame(event.data);
+    }
+  });

  // Both close and error retry. They are not the same event on every failure — a socket that never
  // opens can fire only 'error', one that opens and later drops fires only 'close' — and the host
  // side of this same problem (TerminalDataPlane.UpgradeAsync's takeover) is exactly why retrying is
  // safe: whichever attempt eventually reaches the host, a fresh valid upgrade always wins the socket.
-  socket.addEventListener('close', scheduleReconnect);
-  socket.addEventListener('error', scheduleReconnect);
+  const retry = () => {
+    if (isCurrent()) {
+      forgetHandshakeTimer();
+      scheduleReconnect();
+    }
+  };
+
+  pending.addEventListener('close', retry);
+  pending.addEventListener('error', retry);
 }

 // One observer for the whole root rather than one per pane: resizes arrive in bursts while a
@@ -528,4 +782,30 @@ new ResizeObserver(() => {

 window.addEventListener('beforeunload', () => socket?.close());

+/*
+  The ways this page finds out somebody is looking at it again — rule 3 at the top of the transport
+  section. All three end in the same check, and that check is what makes them safe to be as noisy as they
+  are: with a healthy socket every one of them does nothing.
+
+  'visibilitychange' is the phone's. A WebView collapsed to GONE is a hidden page, so coming back to the
+  terminal screen is the event that says so, and it is the same event Chromium lifts its own throttling
+  on — this page simply does not wait to be asked twice.
+
+  'focus' is the desktop's, where the page is *not* marked hidden while the WebView is collapsed
+  (measured; see docs/platform-flags.md) but a window left in the background for hours has had its timers
+  throttled all the same. It fires when the terminal takes the keyboard back, which is the same gesture.
+
+  'online' is neither head's ordinary case, because the socket is loopback and has nothing to do with the
+  network — but the event does follow a machine coming back from sleep, and a page with a dead socket has
+  no reason to ignore any hint that the world has moved.
+*/
+document.addEventListener('visibilitychange', () => {
+  if (!document.hidden) {
+    reconnectIfDown();
+  }
+});
+
+window.addEventListener('focus', reconnectIfDown);
+window.addEventListener('online', reconnectIfDown);
+
 connect();
@@ -207,7 +207,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -267,9 +267,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -369,11 +369,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -234,6 +234,93 @@ public static class SftpPath

        return trail;
    }
+
+    /// <summary>
+    /// Turns something a person typed into an absolute path.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// The file browser's path box is the reason this exists. A breadcrumb can only offer the path it is
+    /// already standing on, so reaching <c>/var/log/nginx</c> from a home directory is a click and a round
+    /// trip per level — and somebody who already knows where they are going types it instead. What they
+    /// type is not always absolute: <c>..</c>, <c>logs</c> and <c>~/.ssh</c> are all ordinary answers to
+    /// "where to", and a box that took only a leading slash would refuse three of the four shapes every
+    /// shell accepts.
+    /// </para>
+    /// <para>
+    /// <b>Resolved here rather than left to the server.</b> An SFTP server does resolve a relative path —
+    /// against the session's own working directory, which is not necessarily the directory this pane is
+    /// showing — so handing one over would navigate somewhere the breadcrumb above it did not predict. What
+    /// this returns is absolute, which is the only kind every other member here takes.
+    /// </para>
+    /// <para>
+    /// <c>..</c> is collapsed textually, which is one thing a shell's own <c>cd</c> does not do: through a
+    /// symbolic link, <c>..</c> leads to the link's parent here and to the target's parent on the server.
+    /// The difference shows only on a path that walks into a link and back out of it, and the alternative is
+    /// a <c>realpath</c> round trip before anything is listed at all.
+    /// </para>
+    /// </remarks>
+    /// <param name="current">The directory a relative path is taken to be relative to.</param>
+    /// <param name="typed">What was typed. Blank answers <paramref name="current"/>.</param>
+    /// <param name="home">
+    /// What <c>~</c> means, or null in a session that has not said. A leading <c>~</c> with no home to
+    /// expand stays an ordinary segment rather than being guessed at — a directory really can be called
+    /// that, and inventing a home directory to point at would be worse than listing the one that is there.
+    /// </param>
+    public static string Resolve(string current, string typed, string? home = null)
+    {
+        ArgumentException.ThrowIfNullOrEmpty(current);
+        ArgumentNullException.ThrowIfNull(typed);
+
+        var wanted = typed.Trim();
+
+        if (wanted.Length == 0)
+        {
+            return Normalize(current);
+        }
+
+        if (home is { Length: > 0 }
+            && (string.Equals(wanted, "~", StringComparison.Ordinal)
+                || wanted.StartsWith("~/", StringComparison.Ordinal)))
+        {
+            wanted = wanted.Length == 1 ? home : Combine(home, wanted[2..]);
+        }
+
+        return Normalize(IsAbsolute(wanted) ? wanted : Combine(current, wanted));
+    }
+
+    /// <summary>Collapses <c>.</c>, <c>..</c> and repeated separators, anchored at the root.</summary>
+    /// <remarks>
+    /// <c>..</c> above the root is the root, as it is in every shell: <c>/../..</c> is <c>/</c> rather than
+    /// a failure, because there is nowhere else for it to be.
+    /// </remarks>
+    private static string Normalize(string path)
+    {
+        var walked = new List<string>();
+
+        foreach (var segment in path.Split('/', StringSplitOptions.RemoveEmptyEntries))
+        {
+            switch (segment)
+            {
+                case ".":
+                    break;
+
+                case "..":
+                    if (walked.Count > 0)
+                    {
+                        walked.RemoveAt(walked.Count - 1);
+                    }
+
+                    break;
+
+                default:
+                    walked.Add(segment);
+                    break;
+            }
+        }
+
+        return walked.Count == 0 ? Root : Root + string.Join('/', walked);
+    }
 }

 /// <summary>
@@ -121,12 +121,53 @@ public interface ISshConnection : IAsyncDisposable
    Task<ISshShellSession> OpenShellAsync(TerminalSize size, CancellationToken cancellationToken);
 }

+/// <summary>
+/// How far a connection being made has got.
+/// </summary>
+/// <remarks>
+/// <para>
+/// These are the boundaries a client can actually observe, and there are deliberately no others. SSH.NET
+/// runs the whole handshake inside one <c>ConnectAsync</c> and raises exactly one event from the middle of
+/// it — <c>HostKeyReceived</c>, once the key exchange has produced a key to show. That event is the only
+/// interior moment there is, so it is the only interior phase named here: everything before it is
+/// <see cref="Reaching"/> and everything after it is <see cref="Authenticating"/>.
+/// </para>
+/// <para>
+/// ◆ <b>Nothing here is a guess about elapsed time or a fraction of the way through.</b> Each value is
+/// reported at the instant the thing it names actually starts, which is what makes it safe for a screen to
+/// draw as fact. A phase that took no measurable time is reported anyway and simply passes at once — that
+/// is a true account of a fast handshake, not a step that was skipped. See the transfer strip's own remark
+/// in TransfersScreen.axaml for why this design does not invent furniture for states it cannot measure.
+/// </para>
+/// </remarks>
+public enum SshConnectionPhase
+{
+    /// <summary>Resolving the name, opening the socket, and exchanging keys. Before any key is known.</summary>
+    Reaching = 0,
+
+    /// <summary>The server has offered a host key, and its trust is being decided.</summary>
+    CheckingHostKey = 1,
+
+    /// <summary>The key was accepted. The credential is being offered.</summary>
+    Authenticating = 2,
+
+    /// <summary>Authenticated. A pseudo-terminal and a shell channel are being opened.</summary>
+    OpeningShell = 3,
+}
+
 /// <summary>Opens connections, enforcing host key trust before authenticating.</summary>
 public interface ISshConnectionFactory
 {
    /// <summary>
    /// Connects and authenticates.
    /// </summary>
+    /// <param name="request">What to connect to, as whom, and with what.</param>
+    /// <param name="progress">
+    /// Told each phase as it begins, or null to report nothing. Called from whichever thread the handshake
+    /// is on — SSH.NET raises host key verification on its own — so an implementation that touches a UI must
+    /// marshal for itself.
+    /// </param>
+    /// <param name="cancellationToken">Abandons the attempt.</param>
    /// <exception cref="SshHostKeyUnknownException">
    /// The host has no pinned key. The caller must show the fingerprint, and only on explicit
    /// confirmation record it via <see cref="IKnownHostStore.TrustAsync"/> and retry.
@@ -134,5 +175,8 @@ public interface ISshConnectionFactory
    /// <exception cref="SshHostKeyMismatchException">
    /// The presented key differs from the pin. There is no retry path: this is a hard block.
    /// </exception>
-    Task<ISshConnection> ConnectAsync(SshConnectionRequest request, CancellationToken cancellationToken);
+    Task<ISshConnection> ConnectAsync(
+        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
+        CancellationToken cancellationToken);
 }
@@ -42,13 +42,14 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)
    /// <inheritdoc />
    public async Task<ISshConnection> ConnectAsync(
        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
        ArgumentNullException.ThrowIfNull(request);

        var client = new SshClient(BuildConnectionInfo(request));

-        var gate = await ConnectThroughHostKeyGateAsync(client, request, cancellationToken)
+        var gate = await ConnectThroughHostKeyGateAsync(client, request, progress, cancellationToken)
            .ConfigureAwait(false);

        return new SshNetConnection(client, gate.Presented!);
@@ -68,7 +69,10 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)

        var client = new SftpClient(BuildConnectionInfo(request)) { BufferSize = SftpBufferSize };

-        var gate = await ConnectThroughHostKeyGateAsync(client, request, cancellationToken)
+        // No progress for the file-transfer path. The screen that waits on one is the file browser, which
+        // reports itself, and a second connection opened behind an already-open shell has nothing the user
+        // is watching a step list for.
+        var gate = await ConnectThroughHostKeyGateAsync(client, request, progress: null, cancellationToken)
            .ConfigureAwait(false);

        // Read once, here, rather than per call. SftpClient.WorkingDirectory canonicalises against the server
@@ -101,12 +105,18 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)
    private async Task<HostKeyGate> ConnectThroughHostKeyGateAsync(
        BaseClient client,
        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
-        var gate = new HostKeyGate(knownHosts, request, cancellationToken);
+        var gate = new HostKeyGate(knownHosts, request, progress, cancellationToken);

        client.HostKeyReceived += gate.OnHostKeyReceived;

+        // Before the await rather than inside the gate, because this phase is the part of the handshake
+        // that happens before there is anything to raise an event about: the lookup, the socket and the key
+        // exchange. Nothing else can report the start of it.
+        progress?.Report(SshConnectionPhase.Reaching);
+
        try
        {
            await client.ConnectAsync(cancellationToken).ConfigureAwait(false);
@@ -139,6 +149,7 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)
    private sealed class HostKeyGate(
        IKnownHostStore knownHosts,
        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
        /// <summary>What the server offered, once the handshake has reached that point.</summary>
@@ -157,6 +168,11 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)

            Presented = presentation;

+            // Reported before the lookup rather than after it, because the lookup is the wait: this is a
+            // vault-backed store on the handshake thread, and on a locked or cold vault it is the part of
+            // "checking the host key" long enough to be worth naming.
+            progress?.Report(SshConnectionPhase.CheckingHostKey);
+
            // Looked up here rather than before connecting, because the negotiated algorithm is only
            // known now and a server may choose a different one than it did last time.
            //
@@ -179,6 +195,15 @@ public sealed class SshNetConnectionFactory(IKnownHostStore knownHosts)
            var matches = SshHostKeyFingerprint.Equal(pinned, presentation.Fingerprint);
            mismatch = !matches;
            e.CanTrust = matches;
+
+            // Only on acceptance, and here rather than after the await above, because this is the last
+            // moment SSH.NET gives anyone: returning true from this handler is what lets the handshake go on
+            // to offer the credential, and it does not come back until it has an answer either way. A
+            // refusal reports nothing — there is no authentication about to happen for it to be true of.
+            if (matches)
+            {
+                progress?.Report(SshConnectionPhase.Authenticating);
+            }
        }

        /// <summary>The specific exception for a refusal this gate caused, or null if it did not.</summary>
@@ -279,10 +304,11 @@ internal sealed class SshNetConnection(SshClient client, HostKeyPresentation hos
    /// Read at construction rather than lazily: by the time an <see cref="SshNetConnection"/> exists,
    /// <see cref="SshNetConnectionFactory.ConnectAsync"/> has already awaited <c>client.ConnectAsync</c>, so
    /// <c>ConnectionInfo</c> is already populated and there is no earlier moment reading it would race. SSH.NET
-    /// types the property as a non-nullable <c>string</c>, so this reads straight through rather than coalescing
-    /// a null that the library's own contract says cannot occur.
+    /// types the property as nullable all the same — it is null before the key exchange completes — so the
+    /// coalesce is here to satisfy that annotation, not because this call site expects to see it. Empty is the
+    /// value this codebase already uses for a cipher that could not be read; see <c>MainWindowViewModel.NullIfEmpty</c>.
    /// </remarks>
-    public string Cipher { get; } = client.ConnectionInfo.CurrentServerEncryption;
+    public string Cipher { get; } = client.ConnectionInfo.CurrentServerEncryption ?? string.Empty;

    /// <inheritdoc />
    public Task<ISshShellSession> OpenShellAsync(TerminalSize size, CancellationToken cancellationToken)
@@ -24,9 +24,10 @@ internal sealed class SshNetSftpSession(SftpClient client, HostKeyPresentation h
    /// <remarks>
    /// Read at construction, the same way and for the same reason as <c>SshNetConnection.Cipher</c>: this type
    /// is only ever built after <c>SshNetConnectionFactory.OpenSftpAsync</c> has awaited <c>client.ConnectAsync</c>,
-    /// so <c>ConnectionInfo</c> is already populated by the time there is a session to read it from.
+    /// so <c>ConnectionInfo</c> is already populated by the time there is a session to read it from. The coalesce
+    /// is there for SSH.NET's nullable annotation, which covers the pre-key-exchange window this never sees.
    /// </remarks>
-    public string Cipher { get; } = client.ConnectionInfo.CurrentServerEncryption;
+    public string Cipher { get; } = client.ConnectionInfo.CurrentServerEncryption ?? string.Empty;

    /// <inheritdoc />
    public string HomeDirectory { get; } = homeDirectory;
@@ -31,11 +31,11 @@
      },
      "SSH.NET": {
        "type": "Direct",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      },
@@ -54,9 +54,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -257,7 +257,8 @@ public sealed class TerminalWorkspace : IAsyncDisposable
    }

    /// <summary>
-    /// Raised with the session id when a shell ends on its own.
+    /// Raised with the session id once a session is over — its shell having ended on its own, or a
+    /// deliberate close having fully drained.
    /// </summary>
    /// <remarks>
    /// <para>
@@ -268,13 +269,23 @@ public sealed class TerminalWorkspace : IAsyncDisposable
    /// the half of the interface Avalonia draws.
    /// </para>
    /// <para>
-    /// <b>Raised on whatever thread the pump finished on</b>, which is a thread-pool thread. A handler that
-    /// touches an observable collection has to marshal; this type has no toolkit to do it with, which is
-    /// exactly why it does not try.
+    /// <b>Raised only after the session's run task has completed, and that ordering is load-bearing.</b>
+    /// It used to fire from inside the run's own finally block, where the task is by definition not yet
+    /// complete — so a handler reading <see cref="LiveSessionCount"/> still counted the session that had
+    /// just ended, which is how the phone's foreground notification went on saying "1 shell connected"
+    /// over nothing. See <see cref="AnnounceEndedAsync"/>. Raised on a thread-pool continuation, or on the
+    /// closer's own thread; a handler that touches an observable collection has to marshal either way.
    /// </para>
    /// <para>
-    /// Not raised by <see cref="CloseSessionAsync"/>. That path already has a caller who knows the session is
-    /// going, and telling it what it just asked for is how a tab close turns into a second tab close.
+    /// <b>Raised by <see cref="CloseSessionAsync"/> too, which reverses a recorded decision.</b> The old
+    /// reasoning — the caller asked, so telling it is an echo — assumed every subscriber was the caller.
+    /// The phone's keep-alive is not: it hears this event to reconcile a notification with reality, and a
+    /// close that announced nothing left that notification claiming a shell that was gone. Every subscriber
+    /// treats the event as "reconcile" rather than "act" — a tab is marked dead if it is still there and
+    /// skipped if it is not — so a second announcement for a session that already announced its own end
+    /// (closing the tab of a shell that exited earlier) is deliberate and harmless. Shutdown is the one
+    /// close that stays silent: <see cref="DisposeAsync"/> is tearing the subscribers down with the
+    /// sessions, and news nobody is left to hear is not news.
    /// </para>
    /// </remarks>
    public event EventHandler<TerminalSessionEndedEventArgs>? SessionEnded;
@@ -358,13 +369,31 @@ public sealed class TerminalWorkspace : IAsyncDisposable
        dataPlane.RendererAttached.WaitAsync(options.RendererTimeout, cancellationToken);

    /// <summary>Connects to a host and starts a terminal for it.</summary>
+    /// <param name="request">What to connect to, as whom, and with what.</param>
+    /// <param name="size">The pseudo-terminal's initial size.</param>
+    /// <param name="progress">
+    /// Told each phase as it begins, or null to report nothing. Reported from the handshake's own thread;
+    /// see <see cref="SshConnectionPhase"/>. Optional because a session opened by anything other than the
+    /// connecting card has nobody watching a step list for it, which is every caller but one.
+    /// </param>
+    /// <param name="cancellationToken">Abandons the attempt.</param>
    /// <returns>The session id, which identifies this terminal in the renderer.</returns>
+    /// <remarks>
+    /// <see cref="SshConnectionPhase.OpeningShell"/> is reported here rather than by the factory because
+    /// this is where it happens: the factory's work ends with an authenticated connection, and asking for a
+    /// pseudo-terminal on it is a separate round trip this method makes.
+    /// </remarks>
    public async Task<uint> OpenSessionAsync(
        SshConnectionRequest request,
        TerminalSize size,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
-        var connection = await connections.ConnectAsync(request, cancellationToken).ConfigureAwait(false);
+        var connection = await connections
+            .ConnectAsync(request, progress, cancellationToken)
+            .ConfigureAwait(false);
+
+        progress?.Report(SshConnectionPhase.OpeningShell);

        ISshShellSession shell;
        try
@@ -403,6 +432,10 @@ public sealed class TerminalWorkspace : IAsyncDisposable
            sessions[sessionId] = new LiveSession(connection, pump, run);
        }

+        // The announcement's own continuation — see AnnounceEndedAsync. Started after the entry is stored,
+        // so the containment check inside it can never run against a dictionary the session had not reached.
+        _ = AnnounceEndedAsync(sessionId, run);
+
        return sessionId;
    }

@@ -574,6 +607,14 @@ public sealed class TerminalWorkspace : IAsyncDisposable
        {
            // Expected on the ordinary path: disposing the pump cancels its run.
        }
+
+        // After the drain, so a handler reading LiveSessionCount sees this session already gone — the
+        // event's own remark carries why a deliberate close is announced at all, and why shutdown is not:
+        // DisposeAsync sets the flag before its closing loop, and is dismantling every subscriber anyway.
+        if (Volatile.Read(ref disposed) == 0)
+        {
+            SessionEnded?.Invoke(this, new TerminalSessionEndedEventArgs(sessionId));
+        }
    }

    /// <inheritdoc />
@@ -694,21 +735,51 @@ public sealed class TerminalWorkspace : IAsyncDisposable
            // the pump unwinding, which is why CloseSessionAsync needs no call of its own — and why this
            // must not do any work: it is running on a thread-pool thread inside DisposeAsync's loop when
            // the application is closing.
+            //
+            // SessionEnded is deliberately NOT raised from here, and it used to be — see
+            // AnnounceEndedAsync for what was wrong with that.
            ConnectionLog?.Closed(sessionId, clock.GetUtcNow());
+        }
+    }

-            // Only when the session is still one this workspace knows about. CloseSessionAsync removes the
-            // entry before it disposes the pump, so a tab the user closed does not come back as news.
-            bool announce;
+    /// <summary>Announces a session's end once its run task has actually completed.</summary>
+    /// <remarks>
+    /// <para>
+    /// A continuation rather than a line in <see cref="RunSessionAsync"/>'s finally, and the difference is
+    /// what a handler sees. Inside that finally the run task is not yet complete — a finally is part of the
+    /// task — so <see cref="LiveSessionCount"/>, which counts incomplete runs, still included the session
+    /// that had just ended. The phone's keep-alive answers this event by reading exactly that count, and
+    /// reconciled its foreground notification to "1 shell connected" over a shell that was gone, with
+    /// nothing left to fire afterwards and correct it. By the time an await on the run resumes, the task is
+    /// complete and the count is honest.
+    /// </para>
+    /// <para>
+    /// The containment check keeps the deliberate paths out of this route: <see cref="CloseSessionAsync"/>
+    /// removes the entry before it disposes the pump, and makes its own announcement after its own drain.
+    /// </para>
+    /// </remarks>
+    private async Task AnnounceEndedAsync(uint sessionId, Task run)
+    {
+        try
+        {
+            await run.ConfigureAwait(false);
+        }
+        catch (Exception exception) when (exception is not OutOfMemoryException)
+        {
+            // The run's faults belong to whoever drains it — CloseSessionAsync, on the deliberate path.
+            // This continuation cares only that the run is over, however it got there.
+        }

-            lock (sessionGate)
-            {
-                announce = sessions.ContainsKey(sessionId);
-            }
+        bool announce;

-            if (announce)
-            {
-                SessionEnded?.Invoke(this, new TerminalSessionEndedEventArgs(sessionId));
-            }
+        lock (sessionGate)
+        {
+            announce = sessions.ContainsKey(sessionId);
+        }
+
+        if (announce)
+        {
+            SessionEnded?.Invoke(this, new TerminalSessionEndedEventArgs(sessionId));
        }
    }

@@ -37,14 +37,14 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -63,11 +63,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -37,14 +37,14 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -63,11 +63,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -22,9 +22,9 @@
      },
      "Microsoft.NET.ILLink.Tasks": {
        "type": "Direct",
-        "requested": "[10.0.10, )",
-        "resolved": "10.0.10",
-        "contentHash": "f5VCIE7AJpd5YvzNTeMGVzQIgyE9tX+AreTYwQF+REbu+DZo/2Ae+jNSwhPEYrVz6RRkd7y8ubXjk6Nn6Ka+Cg=="
+        "requested": "[10.0.11, )",
+        "resolved": "10.0.11",
+        "contentHash": "IBf7lbovvjGWVWXZX5cJ/cO0WXbId0Zq4BuSeT94mGZuOAP66oMeH9PTBZ9Jpp3Jb6jtK0qm/NyUbPRo1gC/wQ=="
      },
      "MinVer": {
        "type": "Direct",
@@ -16,9 +16,9 @@
      },
      "Microsoft.NET.ILLink.Tasks": {
        "type": "Direct",
-        "requested": "[10.0.10, )",
-        "resolved": "10.0.10",
-        "contentHash": "f5VCIE7AJpd5YvzNTeMGVzQIgyE9tX+AreTYwQF+REbu+DZo/2Ae+jNSwhPEYrVz6RRkd7y8ubXjk6Nn6Ka+Cg=="
+        "requested": "[10.0.11, )",
+        "resolved": "10.0.11",
+        "contentHash": "IBf7lbovvjGWVWXZX5cJ/cO0WXbId0Zq4BuSeT94mGZuOAP66oMeH9PTBZ9Jpp3Jb6jtK0qm/NyUbPRo1gC/wQ=="
      },
      "MinVer": {
        "type": "Direct",
@@ -1744,9 +1744,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -1847,11 +1847,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      },
@@ -1,13 +1,14 @@
 using System.Globalization;
 using Avalonia;
 using Avalonia.Controls;
+using Avalonia.Controls.Presenters;
 using Avalonia.Layout;
 using Avalonia.VisualTree;

 namespace DodoSSH.Client.App.Layout.Tests;

 /// <summary>
-/// The three button shapes centre their caption inside a button taller than the caption.
+/// The button shapes that centre their caption do, and the two that deliberately do not still fill.
 /// </summary>
 /// <remarks>
 /// <para>
@@ -41,6 +42,15 @@ namespace DodoSSH.Client.App.Layout.Tests;
 /// action — so an absolute expectation would be a font metric written down in a test file, and it would move
 /// the day the face does. "Centred" survives both.
 /// </para>
+/// <para>
+/// The five shapes beyond the original three were swept in afterwards, and none of them was misbehaving
+/// when it was: every one is content-sized everywhere it is used today, so <c>Stretch</c> and <c>Center</c>
+/// agreed and the change moved nothing — 113 buttons across 29 screens measured byte-identical before and
+/// after. What the sweep buys is that the day any of them is given a height, it is already right. That is
+/// also why <see cref="AStretchingShapeStillFillsItsButton"/> matters more than it looks: the same
+/// reasoning applied to <c>flat</c> or <c>cat</c> would break a pill and a strip that are currently
+/// correct.
+/// </para>
 /// </remarks>
 public sealed class ButtonCaptionTests
 {
@@ -61,6 +71,11 @@ public sealed class ButtonCaptionTests
    [InlineData("ghost")]
    [InlineData("accent")]
    [InlineData("danger")]
+    [InlineData("navuser")]
+    [InlineData("poprow")]
+    [InlineData("panechip")]
+    [InlineData("chiptoggle")]
+    [InlineData("choice")]
    public async Task ACaptionIsCentredInAButtonTallerThanItself(string shape)
    {
        await MeasureAsync(
@@ -96,6 +111,72 @@ public sealed class ButtonCaptionTests
                "the caption should sit high, which is the defect this suite was written for"));
    }

+    /// <summary>
+    /// <c>flat</c> and <c>cat</c> are excluded from the rule above, and must stay excluded.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// Both stretch their content on purpose, and both would be silently broken by a later pass that
+    /// "finished" the sweep the rest of these classes belong to — which is exactly why this is a test and
+    /// not a comment.
+    /// </para>
+    /// <para>
+    /// <c>flat</c> carries the titlebar's search pill, a <c>Border.searchpill</c> with no height of its own
+    /// that is meant to fill all 35 pixels of the button; the usage states
+    /// <c>HorizontalContentAlignment="Stretch"</c> and relies on the vertical default matching it. Centring
+    /// from the style would shrink that pill to its caption's line box inside a button twice as tall.
+    /// <c>cat</c> carries the keychain rail's accent strip, a <c>Border.rowmark</c> whose style sets
+    /// <c>Width="2"</c> and no height at all — "at full row height", says the rule's own remark — so its
+    /// height is the stretch and nothing else.
+    /// </para>
+    /// <para>
+    /// Asserted as "the content fills the button", not as "the caption is off-centre": what these two need
+    /// is the fill, and a test phrased the other way would still pass if the fill broke in some new way.
+    /// </para>
+    /// </remarks>
+    [Theory]
+    [InlineData("flat")]
+    [InlineData("cat")]
+    public async Task AStretchingShapeStillFillsItsButton(string shape)
+    {
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                // A bare Border is what both of them actually hold: no height, sized only by its parent.
+                var fill = new Border();
+                var button = new Button { Content = fill, Height = FixedHeight };
+                button.Classes.Add(shape);
+
+                var window = LayoutHarness.HostAtMinimumSize(
+                    button, LayoutHarness.MinimumWidth, LayoutHarness.MinimumHeight);
+
+                try
+                {
+                    // The slot read off the presenter rather than recomputed from the button's Padding:
+                    // these shapes differ in whether their presenter also draws a border, and a hand-rolled
+                    // sum was two pixels out on Button.cat for exactly that reason.
+                    var presenter = button.GetVisualDescendants()
+                        .OfType<ContentPresenter>()
+                        .Single(p => string.Equals(p.Name, "PART_ContentPresenter", StringComparison.Ordinal));
+
+                    var slot = presenter.Bounds.Height
+                        - presenter.Padding.Top - presenter.Padding.Bottom
+                        - presenter.BorderThickness.Top - presenter.BorderThickness.Bottom;
+
+                    fill.Bounds.Height.ShouldBe(
+                        slot,
+                        Tolerance,
+                        $"Button.{shape} must stretch its content — the search pill and the rail's accent "
+                        + "strip have no height of their own");
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
    private static Task MeasureAsync(
        string shape, VerticalAlignment? alignment, Action<double, double> assert) =>
        LayoutHarness.OnTheUiThreadAsync(
@@ -122,8 +122,14 @@ internal static class LayoutHarness
    /// <summary>The v5b session shell's own right-hand sidebar, from <c>SessionSidebar.axaml</c>.</summary>
    internal const double SessionSidebarWidth = 300;

-    /// <summary>The v5b session shell's own host header, from <c>SessionHeader.axaml</c>.</summary>
-    internal const double SessionHeaderHeight = 60;
+    /*
+      A third session-shell constant stood here through wave B and C: SessionHeaderHeight, 60 pixels, for
+      the host header that sat above the pane on both surfaces. v5c-4 retires that row — its address and
+      its cross-surface button both live in the sidebar now; see SessionSidebar.axaml — so the pane between
+      the tab row and the status bar is 60 pixels taller and this budget no longer subtracts anything for
+      it. The same treatment the retired window-wide tab strip got above, and for the same reason: a
+      constant for chrome that is not drawn is a budget that quietly under-measures every screen.
+    */

    /// <summary>The v5b session shell's own status bar, from <c>SessionStatusBar.axaml</c>.</summary>
    internal const double SessionStatusBarHeight = 37;
@@ -146,12 +152,12 @@ internal static class LayoutHarness
    /// The arithmetic, top to bottom: <see cref="ScreenHeight"/> less <see cref="SessionShellPadding"/> on
    /// both the top and the bottom of the outer padded column, less <see cref="SessionTabRowHeight"/> for the
    /// tab row that sits above the bordered container, less <see cref="SessionShellBorderThickness"/> on both
-    /// the top and the bottom of that border, less <see cref="SessionHeaderHeight"/> and
-    /// <see cref="SessionStatusBarHeight"/> for the two fixed strips the pane sits between.
+    /// the top and the bottom of that border, less <see cref="SessionStatusBarHeight"/> for the one fixed
+    /// strip left below the pane — v5c-4 retired the header above it; see the note where its constant was.
    /// </remarks>
    internal static double SessionScreenHeight =>
        ScreenHeight - (2 * SessionShellPadding) - SessionTabRowHeight - (2 * SessionShellBorderThickness)
-        - SessionHeaderHeight - SessionStatusBarHeight;
+        - SessionStatusBarHeight;

    /// <summary>
    /// The width a session-shell screen gets, with or without <c>SessionSidebar</c>'s own QUICK ACCESS
@@ -1,8 +1,10 @@
 using Avalonia;
 using Avalonia.Controls;
+using Avalonia.Controls.Presenters;
 using Avalonia.Controls.Primitives;
 using Avalonia.Headless;
 using Avalonia.Input;
+using Avalonia.Media;
 using Avalonia.VisualTree;
 using DodoSSH.Client.App.Views;
 using DodoSSH.Client.Session;
@@ -272,6 +274,49 @@ public sealed class NavRailTests : IAsyncLifetime
        });
    }

+    /// <summary>
+    /// Every row in the popover rests flat, and the pointer is what fills one.
+    /// </summary>
+    /// <remarks>
+    /// <c>Button.poprow</c> set a radius and a padding and left the Background alone, so each row wore the
+    /// Fluent theme's own button fill: the account menu drew as six raised pills where the design draws six
+    /// lines of text. Read as a colour off the templated presenter rather than off the Button, because that
+    /// is where the theme puts its brush and therefore the only place the absence of one can be proven.
+    ///
+    /// The hover half is asserted too, and it is what stops "flat" being fixed by making the rows
+    /// permanently invisible to the pointer: a menu row that does not answer a pointer at all is a worse
+    /// answer than one that answers wrongly.
+    /// </remarks>
+    [Fact]
+    public async Task PopoverRowsAreFlatUntilThePointerFindsThem()
+    {
+        await OnTheRailAsync((rail, window) =>
+        {
+            Click(UserChip(rail), window);
+
+            var row = PopoverRow(window, "Settings");
+            var presenter = row.GetVisualDescendants()
+                .OfType<ContentPresenter>()
+                .First(candidate => candidate.Name is "PART_ContentPresenter");
+
+            var resting = presenter.Background as ISolidColorBrush;
+
+            (resting is null || resting.Color.A == 0).ShouldBeTrue(
+                $"a popover row rests flat, and this one is filled with {resting?.Color}");
+
+            var centre = row.TranslatePoint(new Point(row.Bounds.Width / 2, row.Bounds.Height / 2), window)
+                ?? throw new InvalidOperationException("the row is not in this window's tree");
+
+            window.MouseMove(centre);
+            LayoutHarness.Settle(window, LayoutHarness.NavRailWidth, LayoutHarness.ScreenHeight);
+
+            row.IsPointerOver.ShouldBeTrue("the pointer was moved onto it");
+            (presenter.Background as ISolidColorBrush).ShouldNotBeNull().Color.A.ShouldNotBe(
+                (byte)0,
+                "a row that does not change under the pointer is one nobody can tell is clickable");
+        });
+    }
+
    // ---- Helpers ----

    private Task OnTheRailAsync(Action<NavRail, Window> body) =>
@@ -236,6 +236,51 @@ public sealed class QuickConnectTests : IAsyncLifetime
        });
    }

+    /// <remarks>
+    /// The palette searches every vault the session holds a key for, so a row has to say which one it came
+    /// out of. Two machines a team and a person both call <c>prod-db</c> are otherwise two identical rows,
+    /// and Enter takes whichever the ranking happened to put first.
+    /// <para>
+    /// Typed into rather than read off the unfiltered list, because the shared vault's host sorts last — the
+    /// active vault's rows come first — and the list virtualises, so the row this is about might never be
+    /// realised. Narrowing to it also proves the search reaches past the active vault at all.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task AResultSaysWhichVaultItCameOutOf()
+    {
+        await SeedSharedHostAsync();
+
+        await OnThePaletteAsync((palette, window) =>
+        {
+            shell.SearchText = "prod-db";
+            Relayout(window);
+
+            var found = shell.SearchResults.ShouldHaveSingleItem();
+            found.VaultId.ShouldNotBe(session.ActiveVaultId, "the palette reaches past the active vault");
+
+            VisibleTexts(RowFor(palette, found)).ShouldContain("PLATFORM SECRETS", StringComparer.Ordinal);
+        });
+    }
+
+    /// <remarks>
+    /// The other half of the rule, and the reason the name is a badge rather than a column: a vault named on
+    /// every row of a session that has only one is the same fact repeated, which is noise rather than a
+    /// reading. <c>HostRowViewModel.VaultBadge</c> is empty there, and an empty line has to collapse rather
+    /// than leave a gap above the kind word.
+    /// </remarks>
+    [Fact]
+    public async Task AResultNamesNoVaultWhenThereIsOnlyOneToBeIn()
+    {
+        await OnThePaletteAsync((palette, _) =>
+        {
+            var first = shell.SearchResults[0];
+
+            first.HasVaultBadge.ShouldBeFalse("this fixture's session holds the personal vault alone");
+            VisibleTexts(RowFor(palette, first)).ShouldNotContain("PERSONAL", StringComparer.Ordinal);
+        });
+    }
+
    /// <remarks>
    /// The palette is a box somebody is expected to start typing into, and for a while it was not: the window
    /// focused it from the view model's <c>PropertyChanged</c>, which runs before the binding that reveals the
@@ -307,6 +352,25 @@ public sealed class QuickConnectTests : IAsyncLifetime
            .OfType<ListBoxItem>()
            .First(item => ReferenceEquals(item.DataContext, host));

+    /// <summary>What one row actually draws, in order, ignoring the lines that collapsed.</summary>
+    private static List<string> VisibleTexts(Visual row) =>
+        row.GetVisualDescendants()
+            .OfType<TextBlock>()
+            .Where(text => text.IsEffectivelyVisible)
+            .Select(text => text.Text ?? string.Empty)
+            .ToList();
+
+    /// <summary>Runs the layout pass the application's dispatcher would run after the list changed.</summary>
+    /// <remarks>
+    /// Without it the new rows are in the collection but not in the visual tree, so <see cref="RowFor"/>
+    /// finds nothing to look at.
+    /// </remarks>
+    private static void Relayout(Window window)
+    {
+        Dispatcher.UIThread.RunJobs();
+        window.UpdateLayout();
+    }
+
    private static Point Centre(Visual control, Visual window) =>
        control.TranslatePoint(new Point(control.Bounds.Width / 2, control.Bounds.Height / 2), window)
        ?? throw new InvalidOperationException("the control is not in this window's tree");
@@ -325,4 +389,37 @@ public sealed class QuickConnectTests : IAsyncLifetime

        await vault.LoadAsync(Token);
    }
+
+    /// <summary>
+    /// Adds a second, shared vault to the fixture's session and files one host into it.
+    /// </summary>
+    /// <remarks>
+    /// Straight into the session rather than through <c>VaultsViewModel</c>, which is the technique the
+    /// settings pages' suite uses and for the same reason: creating a vault needs a connection, and this
+    /// shell has none. The key is generated on this machine either way, so what the session ends up holding
+    /// is the same thing a real creation leaves behind — see <see cref="StubTeamServer"/>.
+    /// </remarks>
+    private async Task SeedSharedHostAsync()
+    {
+        using var teamServer = new StubTeamServer();
+
+        var shared = await session.CreateTeamVaultAsync(
+            teamServer.Teams, StubTeamServer.SharedTeamId, "Platform secrets", Token);
+
+        await vault.LoadAsync(Token);
+
+        vault.SelectedTargetVault =
+            vault.TargetVaults.Single(choice => choice.VaultId == shared.VaultId);
+
+        vault.NewHostCommand.Execute(null);
+        vault.EditorLabel = "prod-db";
+        vault.EditorHostname = "db.internal";
+        vault.EditorUsername = "deploy";
+
+        await vault.SaveHostCommand.ExecuteAsync(null);
+
+        vault.IsEditing.ShouldBeFalse(vault.Status);
+
+        await vault.LoadAsync(Token);
+    }
 }
@@ -1,5 +1,6 @@
 using Avalonia;
 using Avalonia.Controls;
+using Avalonia.Controls.Primitives;
 using Avalonia.Headless;
 using Avalonia.Input;
 using Avalonia.Threading;
@@ -189,6 +190,25 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
        await MeasureDrawerAsync(faults => faults.ShouldBeEmpty());
    }

+    /// <remarks>
+    /// The editor with its new-credential card showing, which the test above never draws: the card is
+    /// collapsed until somebody presses + NEW CREDENTIAL, so nothing else in this suite measures the three
+    /// boxes, the paragraph of hint text and the two buttons it adds inside the section that already holds
+    /// the authentication picker. A card that only appears on a click is exactly the shape that escapes a
+    /// harness driven by the default state.
+    /// </remarks>
+    [Fact]
+    public async Task TheHostDrawerFitsWithTheNewCredentialFormOpen()
+    {
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.IsAddingEditorCredential.ShouldBeTrue("there is nothing to measure otherwise");
+
+        await MeasureDrawerAsync(faults => faults.ShouldBeEmpty());
+    }
+
    /// <remarks>
    /// The other editor, and it is in this control for the first time: the desktop's group editor used to be
    /// a bar across the foot of the hosts screen, where it competed with the grid for the same column. Its
@@ -1255,7 +1275,7 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
    /// this screen — see <c>ShowsQuickAccessSidebar</c> — so this is the test that actually reaches the
    /// 472-pixel budget <see cref="LayoutHarness.SessionScreenWidth"/> computes, 204 pixels a side. DISCONNECT
    /// is what is left in the remote pane's own connected strip now; the account-at-host chip that used to
-    /// share the row with it moved out, because <c>SessionHeader</c> already prints the same address above
+    /// share the row with it moved out, because the session shell already prints the same address beside
    /// this screen — see <c>TransfersScreen.axaml</c>'s own remark on the strip for why keeping both was the
    /// thing squeezing DISCONNECT off the edge at this width.
    /// </para>
@@ -1292,10 +1312,18 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
    /// The question in front of deleting something on the host, which takes a row out of the remote pane's
    /// column while the listing under it is still showing. A directory, because that is the longer of the
    /// two warnings, and a path deep enough to wrap in a pane a third of the window wide.
+    /// <para>
+    /// Connected, because that is the only state this question can be asked in — and it is the state that
+    /// asks it at the narrowest budget, since <c>IsConnected</c> is what pulls QUICK ACCESS's own sidebar
+    /// in beside this screen and takes the pane down to 204 pixels. Measured disconnected until the row of
+    /// item actions arrived beside DELETE, which is a shape this card has to share the pane's height with.
+    /// </para>
    /// </remarks>
    [Fact]
    public async Task TheTransfersScreenFitsWithADeletionInQuestion()
    {
+        transfers.IsConnected = true;
+        transfers.RemotePath = "/srv/releases/site/backups/nightly";
        transfers.PendingRemoteDeletion = new RemoteDeletionRequest(
            "2026-07-30",
            "/srv/releases/site/backups/nightly/2026-07-30",
@@ -1304,6 +1332,112 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
        await MeasureTransfersAsync(faults => faults.ShouldBeEmpty());
    }

+    /// <remarks>
+    /// The rename form, which takes a row out of the remote pane's column the way the deletion question
+    /// does but is a taller shape: a heading, the path, a label, a box and a sentence, over a listing that
+    /// is still showing. Measured connected, so it is asked at the 204-pixel width the session shell's own
+    /// sidebar leaves this pane.
+    /// </remarks>
+    [Fact]
+    public async Task TheTransfersScreenFitsWithARenameInQuestion()
+    {
+        transfers.IsConnected = true;
+        transfers.RemotePath = "/srv/releases/site/shared";
+        transfers.PendingRemoteMove = new RemoteMoveRequest(
+            "site-backup-2026-07-30.sql.gz",
+            "/srv/releases/site/shared/site-backup-2026-07-30.sql.gz",
+            IsDirectory: false,
+            RemoteMoveKind.Rename);
+        transfers.RemoteMoveTarget = "site-backup-2026-07-30.sql.gz";
+
+        await MeasureTransfersAsync(faults => faults.ShouldBeEmpty("with a rename being filled in"));
+    }
+
+    /// <remarks>
+    /// The move form is the same shape with longer words in it — see <c>RemoteMoveRequest.Note</c>, whose
+    /// move half is two sentences where the rename half is one — and a directory, which is the kind whose
+    /// destination is most likely to be a deep path typed in full.
+    /// </remarks>
+    [Fact]
+    public async Task TheTransfersScreenFitsWithAMoveInQuestion()
+    {
+        transfers.IsConnected = true;
+        transfers.RemotePath = "/srv/releases/site/shared";
+        transfers.PendingRemoteMove = new RemoteMoveRequest(
+            "uploads",
+            "/srv/releases/site/shared/uploads",
+            IsDirectory: true,
+            RemoteMoveKind.Move);
+        transfers.RemoteMoveTarget = "/srv/releases/site/shared/archive/2026/production";
+
+        await MeasureTransfersAsync(faults => faults.ShouldBeEmpty("with a move being filled in"));
+    }
+
+    /// <remarks>
+    /// <para>
+    /// The pane header's path is a box that can be typed into, and this is what says so: the regression it
+    /// guards against is the one this replaced, a <c>TextBlock</c> that printed where the pane was and gave
+    /// no way to say where to go. It is bound to <see cref="TransfersViewModel.RemotePathDraft"/> rather
+    /// than to <c>RemotePath</c>, which is the difference between a box somebody can finish typing into and
+    /// one that navigates on every keystroke.
+    /// </para>
+    /// <para>
+    /// The three item buttons are asserted in the same pass because they and the box are the same change:
+    /// DELETE left the header to join RENAME and MOVE below it, and the room the box has is exactly the
+    /// room those two buttons no longer take up there.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task TheRemotePanesPathIsTypedAndItsRowActionsAreAllThere()
+    {
+        transfers.IsConnected = true;
+        transfers.RemotePath = "/srv/releases/site/shared/uploads/production/2026/08/nightly";
+        transfers.RemotePathDraft = transfers.RemotePath;
+
+        transfers.RemoteEntries.Add(new RemoteEntryRowViewModel(new SftpEntry(
+            "docker-compose.yml", "/srv/releases/site/docker-compose.yml", SftpEntryKind.File,
+            3_400, TimeProvider.System.GetUtcNow(), "-rw-r--r--")));
+
+        transfers.SelectedRemoteEntry = transfers.RemoteEntries[0];
+
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var screen = new TransfersScreen { DataContext = transfers };
+
+                var window = LayoutHarness.HostAtMinimumSize(
+                    screen, LayoutHarness.SessionScreenWidth(sidebarVisible: true), LayoutHarness.SessionScreenHeight);
+
+                try
+                {
+                    var box = screen.GetVisualDescendants()
+                        .OfType<TextBox>()
+                        .Single(text => text.Classes.Contains("pathbox"));
+
+                    box.Text.ShouldBe(transfers.RemotePath);
+                    box.IsEffectivelyEnabled.ShouldBeTrue("nothing may type into a disconnected pane");
+                    box.IsReadOnly.ShouldBeFalse();
+
+                    var tips = screen.GetVisualDescendants()
+                        .OfType<Button>()
+                        .Select(button => ToolTip.GetTip(button) as string)
+                        .Where(tip => tip is not null)
+                        .ToList();
+
+                    tips.ShouldContain("Rename on the host");
+                    tips.ShouldContain("Move to another directory");
+                    tips.ShouldContain("Delete on the host");
+
+                    LayoutHarness.Unreachable(window).ShouldBeEmpty("with a row chosen and its actions showing");
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
    // ---- ◆ wave C: the restyled panes and the TRANSFERS strip ----

    /// <remarks>
@@ -1577,7 +1711,7 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
    /// <remarks>
    /// <para>
    /// v5b's redraw changes what this test has to hold. Three button shapes live in the rail now rather
-    /// than one: the switcher's three segments, each a third of the rail's own content width; the six item
+    /// than one: the switcher's three segments, each a third of the rail's own content width; the five item
    /// rows below it and the user chip at the foot, both the rail's full content width. A single
    /// across-the-board width assertion the way the v3 version of this test made one would either be wrong
    /// for the segments or have to loosen until it caught nothing, so each shape gets its own count and its
@@ -1585,13 +1719,18 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
    /// </para>
    /// <para>
    /// The rail runs vertically, so what runs out at the window's minimum is still height — a switcher plus
-    /// six rows plus a user chip have to leave room for each other in the same space the v3 rail's seven
+    /// five rows plus a user chip have to leave room for each other in the same space the v3 rail's seven
    /// plain rows did. Both counts are asserted in both directions for the reason the old test's was: an
    /// entry silently dropping off the bottom would still pass every other assertion here.
    /// </para>
+    /// <para>
+    /// Five and not six since Pins left the rail: the pins screen is reached from "Host keys" on the Keys
+    /// screen, which was always the other way in. Exact rather than a bound, so putting a row back is a
+    /// decision somebody makes here rather than something that slips in.
+    /// </para>
    /// </remarks>
    [Fact]
-    public async Task TheNavRailHoldsItsSwitcherSixDestinationsAndTheUserChipAtTheWindowsMinimum()
+    public async Task TheNavRailHoldsItsSwitcherFiveDestinationsAndTheUserChipAtTheWindowsMinimum()
    {
        await LayoutHarness.OnTheUiThreadAsync(
            () =>
@@ -1611,7 +1750,7 @@ public sealed class ScreenLayoutTests : IAsyncLifetime

                    segments.Count.ShouldBe(3, "SSH, SFTP and S3");
                    rows.Count.ShouldBe(
-                        6, "the mode-dependent first row, then Hosts, Keys, Pins, Snips and Logs");
+                        5, "the mode-dependent first row, then Hosts, Keys, Snips and Logs");

                    foreach (var segment in segments)
                    {
@@ -2033,6 +2172,262 @@ public sealed class ScreenLayoutTests : IAsyncLifetime
    /// runtime — see <see cref="LayoutHarness.SessionScreenWidth"/> — so a test that connects before calling
    /// this measures the tighter, sidebar-narrowed shape without having to say so twice.
    /// </remarks>
+
+
+
+
+
+
+    // ---- ◆ The listings' columns ----
+
+    /// <remarks>
+    /// <para>
+    /// <b>Every cell shows what it holds, at a width this screen actually gets.</b> The columns were fixed
+    /// pixel widths until they were measured against their own content: MODIFIED prints a sixteen-character
+    /// timestamp needing 116 pixels and had 52, so it was truncated at every width the application has ever
+    /// been drawn at — on a maximised window it read "2026-08" beside a NAME column with four hundred empty
+    /// pixels in it. PERMS and SIZE were short by the same kind of margin.
+    /// </para>
+    /// <para>
+    /// Asserted by measuring each cell's own text unconstrained and holding the rendered width against it,
+    /// rather than against numbers written down here: a column that fits is a column at least as wide as
+    /// what it has to draw, and any other formulation is this test agreeing with the markup about an
+    /// arithmetic they both got from the same place.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task TheListingColumnsShowTheirContentInFullWhenThereIsRoom()
+    {
+        SeedBothListings();
+
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var screen = new TransfersScreen { DataContext = transfers };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    screen, MaximisedSessionScreenWidth, LayoutHarness.SessionScreenHeight);
+
+                try
+                {
+                    foreach (var text in new[] { "2.1 KB", "2026-08-21 11:36", "-rw-r--r--", "2026-07-04 09:00" })
+                    {
+                        var cell = screen.GetVisualDescendants()
+                            .OfType<TextBlock>()
+                            .First(block => string.Equals(block.Text, text, StringComparison.Ordinal));
+
+                        cell.Bounds.Width.ShouldBeGreaterThanOrEqualTo(
+                            Unconstrained(cell) - 0.5, $"'{text}' has to fit the column it is drawn in");
+                    }
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
+    /// <remarks>
+    /// The headings are right-aligned in their own columns, so two of them whose columns are exactly the
+    /// width of their text run together: SIZE ended on the pixel MODIFIED began at, and the row read
+    /// "SIZEMODIFIED". This holds the gap that fixes it — a left margin on each of the three, which does not
+    /// move a right-aligned label but does stop the column before it reaching this one.
+    /// </remarks>
+    [Fact]
+    public async Task TheListingHeadingsDoNotRunIntoEachOther()
+    {
+        SeedBothListings();
+
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var screen = new TransfersScreen { DataContext = transfers };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    screen, MaximisedSessionScreenWidth, LayoutHarness.SessionScreenHeight);
+
+                try
+                {
+                    // Per pane, not across both. Each has its own NAME at its own left edge, and a list of
+                    // all seven sorted by position pairs the local pane's last heading with the remote
+                    // pane's first — two labels in different panes, which no amount of margin separates.
+                    var rows = screen.GetVisualDescendants()
+                        .OfType<Grid>()
+                        .Where(grid => grid.Children.OfType<TextBlock>().Any(
+                            block => block.Classes.Contains("label")
+                                && string.Equals(block.Text, "NAME", StringComparison.Ordinal)))
+                        .ToList();
+
+                    rows.Count.ShouldBe(2, "one heading row per pane");
+
+                    foreach (var row in rows)
+                    {
+                        var headings = row.Children
+                            .OfType<TextBlock>()
+                            .Where(block => block.Classes.Contains("label"))
+                            .Select(block => (block.Text, Left: block.Bounds.X, Right: block.Bounds.Right))
+                            .OrderBy(heading => heading.Left)
+                            .ToList();
+
+                        foreach (var (before, after) in headings.Zip(headings.Skip(1)))
+                        {
+                            after.Left.ShouldBeGreaterThan(
+                                before.Right, $"'{before.Text}' must not touch '{after.Text}'");
+                        }
+                    }
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
+    /// <remarks>
+    /// <para>
+    /// The other end of the same fault. At the 204 pixels the session shell's own sidebar leaves a pane, the
+    /// fixed columns took 176 of a row's 180 and the remote pane's NAME cell measured <b>zero</b> — a file
+    /// browser drawing sizes, timestamps and modes for rows whose names were not on screen at all.
+    /// </para>
+    /// <para>
+    /// No column carries a MinWidth, which is what keeps this from being a fight the row can lose: at any
+    /// width all four give ground together, and NAME — weighted heaviest — is the last to run out. What is
+    /// asserted is only that it has not run out, because how much of a name fits in 204 pixels is a question
+    /// with no good answer.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task TheNameColumnSurvivesTheNarrowestBudget()
+    {
+        SeedBothListings();
+
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var screen = new TransfersScreen { DataContext = transfers };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    screen, LayoutHarness.SessionScreenWidth(sidebarVisible: true), LayoutHarness.SessionScreenHeight);
+
+                try
+                {
+                    foreach (var name in new[] { ".bash_history", ".azure-devops" })
+                    {
+                        var cell = screen.GetVisualDescendants()
+                            .OfType<TextBlock>()
+                            .First(block => string.Equals(block.Text, name, StringComparison.Ordinal));
+
+                        cell.Bounds.Width.ShouldBeGreaterThan(20, $"'{name}' must be readable at all");
+                    }
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
+    /// <remarks>
+    /// A placeholder cut off mid-word reads as a rendering fault rather than as a hint — MKDIR's box drew
+    /// "new directo" and the pane header's drew a path ending mid-segment. Both are boxes whose width is
+    /// fixed by the pane's own narrowest budget, so the text is what had to give.
+    /// </remarks>
+    [Fact]
+    public async Task ThePaneBoxesPlaceholdersFitTheBoxesTheyAreIn()
+    {
+        transfers.IsConnected = true;
+
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var screen = new TransfersScreen { DataContext = transfers };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    screen, LayoutHarness.SessionScreenWidth(sidebarVisible: true), LayoutHarness.SessionScreenHeight);
+
+                try
+                {
+                    foreach (var box in screen.GetVisualDescendants().OfType<TextBox>())
+                    {
+                        // The picker's own password box is in the collapsed half of the invitation, so it
+                        // lays out at zero width and has no room for anything. Only what is on screen.
+                        if (box.Watermark is not { Length: > 0 } mark || !box.IsEffectivelyVisible)
+                        {
+                            continue;
+                        }
+
+                        var room = box.Bounds.Width - box.Padding.Left - box.Padding.Right;
+
+                        room.ShouldBeGreaterThanOrEqualTo(
+                            Measured(mark, box.FontSize, box.FontFamily),
+                            $"the placeholder '{mark}' has to fit its own box");
+                    }
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
+
+    /// <summary>Puts one row of each pane's own shape in, with content of a real length.</summary>
+    /// <remarks>
+    /// The local pane is cleared first for the reason <see cref="TheRowTemplateShowsSizeAndDateColumns"/>
+    /// gives: it lists this fixture's real home directory, and a virtualizing ListBox realises only the rows
+    /// that fit — a row appended after those would never be built, and the assertion would find nothing to
+    /// have missed.
+    /// </remarks>
+    private void SeedBothListings()
+    {
+        transfers.IsConnected = true;
+        transfers.RemotePath = "/root";
+
+        transfers.RemoteEntries.Add(new RemoteEntryRowViewModel(new SftpEntry(
+            ".bash_history",
+            "/root/.bash_history",
+            SftpEntryKind.File,
+            2_150,
+            new DateTimeOffset(2026, 8, 21, 11, 36, 0, TimeSpan.Zero),
+            "-rw-r--r--")));
+
+        transfers.LocalEntries.Clear();
+        transfers.LocalEntries.Add(new LocalEntryRowViewModel(new LocalEntry(
+            ".azure-devops",
+            Path.Combine(Path.GetTempPath(), ".azure-devops"),
+            IsDirectory: true,
+            Length: 0,
+            new DateTimeOffset(2026, 7, 4, 9, 0, 0, TimeSpan.Zero))));
+    }
+
+    /// <summary>
+    /// What a session-shell screen gets on a maximised window, which is where the columns were reported
+    /// wrong.
+    /// </summary>
+    /// <remarks>
+    /// A 1843-pixel window less the shell's own 26-pixel padding a side, its 1-pixel border a side, and
+    /// QUICK ACCESS's 300 — the arithmetic <see cref="LayoutHarness.SessionScreenWidth"/> does, at a width
+    /// that constant cannot express because it is pinned to the window's <em>minimum</em>. Both belong in
+    /// this file: the minimum is what everything else here measures against, and this is the width at which
+    /// the numeric columns reach their caps and the question "does the content fit" has a yes to give.
+    /// Below it they share the width instead, which is what
+    /// <see cref="TheNameColumnSurvivesTheNarrowestBudget"/> holds the other end of.
+    /// </remarks>
+    private const double MaximisedSessionScreenWidth = 1843 - (2 * 26) - (2 * 1) - 300;
+
+    /// <summary>What a rendered block would want if nothing bounded it.</summary>
+    private static double Unconstrained(TextBlock block) =>
+        Measured(block.Text ?? string.Empty, block.FontSize, block.FontFamily);
+
+    /// <inheritdoc cref="Unconstrained" />
+    private static double Measured(string text, double fontSize, Avalonia.Media.FontFamily family)
+    {
+        var block = new TextBlock { Text = text, FontSize = fontSize, FontFamily = family };
+
+        block.Measure(new Size(double.PositiveInfinity, double.PositiveInfinity));
+
+        return block.DesiredSize.Width;
+    }
+
    private Task MeasureTransfersAsync(Action<IReadOnlyList<string>> assert) =>
        LayoutHarness.OnTheUiThreadAsync(
            () =>
@@ -0,0 +1,184 @@
+using Avalonia;
+using Avalonia.Controls;
+using Avalonia.Headless;
+using Avalonia.Input;
+using Avalonia.VisualTree;
+using DodoSSH.Client.App.Views;
+using DodoSSH.Client.Session;
+using DodoSSH.Client.Shell.ViewModels;
+using DodoSSH.Client.Ssh;
+using DodoSSH.Client.Storage;
+using DodoSSH.Client.Terminal;
+using NSubstitute;
+
+namespace DodoSSH.Client.App.Layout.Tests;
+
+/// <summary>
+/// The session shell's right-hand column: its two widths, and what a long address does to the row it shares.
+/// </summary>
+/// <remarks>
+/// Worth a suite of its own since v5c-4, which gave this control two things it did not have: a session block
+/// at its head — the address, and the cross-surface button, both inherited from the 60-pixel header row that
+/// pass retired — and a closed state. The first is exactly the shape this harness exists for, a fixed-width
+/// column holding a string of unbounded length beside a button that must stay clickable; the second is a
+/// width the rest of the window has to cope with, and <c>MainWindow.axaml</c> copes with it by asking this
+/// control how wide it is rather than by knowing.
+/// </remarks>
+public sealed class SessionSidebarTests : IAsyncLifetime
+{
+    /// <summary>The widths <c>SessionSidebar.axaml</c> declares for its two states.</summary>
+    private const double OpenWidth = 300;
+
+    /// <inheritdoc cref="OpenWidth" />
+    private const double RailWidth = 34;
+
+    /// <remarks>
+    /// Long on purpose, and longer than the column is wide at this font: the address is the one string here
+    /// whose length nobody controls, and it shares its row with the button that closes the column.
+    /// </remarks>
+    private const string LongAddress = "a-very-long-deploy-account@db-primary.eu-west-1.internal.example:22022";
+
+    private string directory = null!;
+    private ClientCacheFactory caches = null!;
+    private TerminalWorkspace workspace = null!;
+    private MainWindowViewModel shell = null!;
+
+    private static CancellationToken Token => TestContext.Current.CancellationToken;
+
+    /// <inheritdoc />
+    public ValueTask InitializeAsync()
+    {
+        // A profile of this test's own rather than ClientPaths.Default: closing the sidebar is written
+        // through to disk — see ClientSettings.SessionSidebarOpen — and a suite that used the default paths
+        // would be editing the preferences of whoever ran it.
+        directory = Path.Combine(Path.GetTempPath(), $"dodossh-sidebar-{Guid.CreateVersion7():N}");
+        caches = ClientCacheFactory.ForMemory($"session-sidebar-{Guid.CreateVersion7():N}");
+
+        workspace = new TerminalWorkspace(
+            new InMemoryTerminalAssetProvider(new Dictionary<string, TerminalAsset>(StringComparer.Ordinal)),
+            Substitute.For<ISshConnectionFactory>(),
+            TimeProvider.System);
+
+        shell = new MainWindowViewModel(
+            new ClientPaths(directory),
+            caches,
+            workspace,
+            new VaultKnownHostStore(),
+            Substitute.For<IDeviceKeyStore>(),
+            (_, _) => throw new NotSupportedException("nothing here signs in"),
+            TimeProvider.System,
+            Substitute.For<ISftpSessionFactory>())
+        {
+            State = ShellState.Unlocked,
+        };
+
+        return ValueTask.CompletedTask;
+    }
+
+    /// <inheritdoc />
+    public async ValueTask DisposeAsync()
+    {
+        await shell.DisposeAsync();
+        await workspace.DisposeAsync();
+        caches.Dispose();
+
+        if (Directory.Exists(directory))
+        {
+            Directory.Delete(directory, recursive: true);
+        }
+    }
+
+    /// <remarks>
+    /// The address trims and the close button stays where it is; that is the whole claim. Asserted through
+    /// <see cref="LayoutHarness.Unreachable"/> rather than by reading the address's own width, because what
+    /// matters is not how much of the string is shown — an ellipsis is an honest answer — but that nothing
+    /// beside it was pushed out of the column to make room.
+    /// </remarks>
+    [Fact]
+    public async Task TheColumnIsThreeHundredWide_AndALongAddressPushesNothingOutOfIt()
+    {
+        await OnTheSidebarAsync((sidebar, window) =>
+        {
+            // DesiredSize rather than Bounds, and that distinction is the control's own: the width lives on
+            // the Border inside it, so what the surrounding "Auto" column is given — and what this asks for
+            // — is what the control asks for, not how wide a host window happened to stretch it.
+            sidebar.DesiredSize.Width.ShouldBe(OpenWidth);
+
+            shell.SessionAddress.ShouldBe(LongAddress, "the fixture selected a tab with one");
+
+            LayoutHarness.Unreachable(window).ShouldBeEmpty();
+        });
+    }
+
+    /// <remarks>
+    /// The cross-surface button that used to live in the header row. Read off the control rather than off the
+    /// view model, so a row bound to the wrong property — or to nothing, which a compiled binding would still
+    /// draw as an empty button — fails this.
+    /// </remarks>
+    [Fact]
+    public async Task TheCrossSurfaceButtonNamesTheOtherSurface()
+    {
+        await OnTheSidebarAsync((sidebar, _) =>
+        {
+            var button = sidebar.GetVisualDescendants()
+                .OfType<Button>()
+                .First(candidate => candidate.Classes.Contains("headerghost"));
+
+            button.Content.ShouldBe("Open SFTP");
+        });
+    }
+
+    /// <remarks>
+    /// Closed, the control is still drawn and is still the thing the window asks for a width — see
+    /// <c>MainWindow.axaml</c>'s own "Auto" column. What it must not be is nothing: a rail with the way back
+    /// on it is the difference between a panel somebody closed and a panel somebody lost.
+    /// </remarks>
+    [Fact]
+    public async Task ClosingTheColumnLeavesTheRailThatBringsItBack()
+    {
+        await OnTheSidebarAsync((sidebar, window) =>
+        {
+            shell.IsSessionSidebarOpen = false;
+            LayoutHarness.Settle(window, LayoutHarness.MinimumWidth, LayoutHarness.MinimumHeight);
+
+            sidebar.DesiredSize.Width.ShouldBe(RailWidth);
+
+            var grip = sidebar.GetVisualDescendants()
+                .OfType<Button>()
+                .Single(candidate => candidate.Classes.Contains("sidebargrip") && candidate.IsEffectivelyVisible);
+
+            var centre = grip.TranslatePoint(new Point(grip.Bounds.Width / 2, grip.Bounds.Height / 2), window)
+                ?? throw new InvalidOperationException("the grip is not in this window's tree");
+
+            window.MouseDown(centre, MouseButton.Left);
+            window.MouseUp(centre, MouseButton.Left);
+
+            shell.IsSessionSidebarOpen.ShouldBeTrue("the rail's own button is what reopens the column");
+
+            LayoutHarness.Settle(window, LayoutHarness.MinimumWidth, LayoutHarness.MinimumHeight);
+            sidebar.DesiredSize.Width.ShouldBe(OpenWidth);
+        });
+    }
+
+    private Task OnTheSidebarAsync(Action<SessionSidebar, Window> body) =>
+        LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                shell.Tabs.Add(new TerminalTabViewModel(1, "db-primary", LongAddress));
+                shell.SelectTabCommand.Execute(shell.Tabs[0]);
+
+                var sidebar = new SessionSidebar { DataContext = shell, ShowsSnips = true };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    sidebar, LayoutHarness.MinimumWidth, LayoutHarness.MinimumHeight);
+
+                try
+                {
+                    body(sidebar, window);
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+}
@@ -101,4 +101,59 @@ public sealed class TitleBarTests : IAsyncLifetime
            },
            Token);
    }
+
+    /// <remarks>
+    /// The chip that says which chord opens the pill beside it. The design's own is 34 pixels wide because
+    /// the design's own label is ⌘K — two glyphs — and this build substitutes "CTRL K", which at 10.5 mono is
+    /// wider than that. It shipped clipped: the chip drew "CTRL" and half of the K, which reads as a rendering
+    /// glitch rather than as a keyboard shortcut.
+    ///
+    /// Asserted as "the chip is at least as wide as its own text", not against a number. A pixel count would
+    /// have to be re-derived by hand every time the font, the size or the wording moved, and the thing that
+    /// actually matters is the relationship between the two.
+    /// </remarks>
+    [Fact]
+    public async Task TheKeyboardChipIsWideEnoughForTheChordItNames()
+    {
+        await LayoutHarness.OnTheUiThreadAsync(
+            () =>
+            {
+                var bar = new TitleBar { DataContext = shell };
+                var window = LayoutHarness.HostAtMinimumSize(
+                    bar, LayoutHarness.MinimumWidth, LayoutHarness.TitleBarHeight);
+
+                try
+                {
+                    var label = bar.GetVisualDescendants()
+                        .OfType<TextBlock>()
+                        .Single(text => string.Equals(text.Text, "CTRL K", StringComparison.Ordinal));
+
+                    var chip = label.GetVisualAncestors().OfType<Border>().First();
+
+                    // Measured on a copy under an unbounded constraint, not read off the label in the tree.
+                    // A TextBlock's own DesiredSize is already clipped to what it was given, so the laid-out
+                    // one reports 34 inside a 34-pixel chip whether or not the text fits — which is exactly
+                    // the state this test exists to fail on.
+                    var natural = new TextBlock
+                    {
+                        Text = label.Text,
+                        FontFamily = label.FontFamily,
+                        FontSize = label.FontSize,
+                        FontWeight = label.FontWeight,
+                    };
+
+                    natural.Measure(Size.Infinity);
+
+                    natural.DesiredSize.Width.ShouldBeGreaterThan(0, "the chord is a real run of text");
+                    chip.Bounds.Width.ShouldBeGreaterThanOrEqualTo(
+                        natural.DesiredSize.Width,
+                        "a chip narrower than its own label draws part of the chord and cuts the rest");
+                }
+                finally
+                {
+                    window.Close();
+                }
+            },
+            Token);
+    }
 }
@@ -551,7 +551,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -663,9 +663,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "CommunityToolkit.Mvvm": {
        "type": "CentralTransitive",
@@ -771,11 +771,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      },
@@ -40,20 +40,43 @@ internal sealed class FakeSshConnectionFactory : ISshConnectionFactory, ISftpSes
    /// <inheritdoc />
    public async Task<ISshConnection> ConnectAsync(
        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
        Requests.Add(request);

+        // Before the gate rather than after it, which is what makes this fake useful for the connecting
+        // card: a test that holds Gate open is a connection stuck partway through, and the step list has to
+        // show it stuck on a named step rather than on none.
+        progress?.Report(SshConnectionPhase.Reaching);
+
        if (Gate is { } gate)
        {
            await gate.Task.WaitAsync(cancellationToken).ConfigureAwait(false);
        }

-        return Failure is { } failure
-            ? throw failure
-            : new FakeSshConnection(request);
+        if (Failure is { } failure)
+        {
+            throw failure;
+        }
+
+        // Only on the way to succeeding. A failure reported as having authenticated would let a test pass
+        // while the card showed a refused connection getting one step further than it did.
+        progress?.Report(SshConnectionPhase.CheckingHostKey);
+        progress?.Report(SshConnectionPhase.Authenticating);
+
+        return new FakeSshConnection(request);
    }

+    /// <summary>The file-transfer session this factory last handed out, or null when it never has.</summary>
+    /// <remarks>
+    /// Kept so a test can read back what the screen actually asked the host to do — which path was renamed,
+    /// which was deleted, which directories were listed. The screen reports all three in its own status
+    /// line, and a suite that asserted only on that would be checking a sentence this code wrote about
+    /// itself rather than the operation it claims to have performed.
+    /// </remarks>
+    internal FakeSftpSession? OpenedSftp { get; private set; }
+
    /// <inheritdoc />
    public Task<ISftpSession> OpenSftpAsync(
        SshConnectionRequest request,
@@ -61,9 +84,14 @@ internal sealed class FakeSshConnectionFactory : ISshConnectionFactory, ISftpSes
    {
        SftpRequests.Add(request);

-        return Failure is { } failure
-            ? Task.FromException<ISftpSession>(failure)
-            : Task.FromResult<ISftpSession>(new FakeSftpSession(request));
+        if (Failure is { } failure)
+        {
+            return Task.FromException<ISftpSession>(failure);
+        }
+
+        OpenedSftp = new FakeSftpSession(request);
+
+        return Task.FromResult<ISftpSession>(OpenedSftp);
    }
 }

@@ -89,9 +117,26 @@ internal sealed class FakeSftpSession(SshConnectionRequest request) : ISftpSessi
    /// <inheritdoc />
    public string HomeDirectory => $"/home/{request.Username}";

+    /// <summary>Every directory this session has been asked to list, in order.</summary>
+    /// <remarks>
+    /// The evidence that a refresh happened at all. A listing whose contents never change — this one always
+    /// answers the same single row — leaves no other trace of having been re-read, which is exactly the
+    /// thing the automatic refresh after a transfer has to be proved to do.
+    /// </remarks>
+    internal List<string> Listed { get; } = [];
+
+    /// <summary>Every rename this session has been asked for, as it was asked.</summary>
+    internal List<(string From, string To)> Renamed { get; } = [];
+
+    /// <summary>Every path this session has been asked to delete.</summary>
+    internal List<string> Deleted { get; } = [];
+
    /// <inheritdoc />
-    public Task<IReadOnlyList<SftpEntry>> ListAsync(string path, CancellationToken cancellationToken) =>
-        Task.FromResult<IReadOnlyList<SftpEntry>>(
+    public Task<IReadOnlyList<SftpEntry>> ListAsync(string path, CancellationToken cancellationToken)
+    {
+        Listed.Add(path);
+
+        return Task.FromResult<IReadOnlyList<SftpEntry>>(
        [
            new SftpEntry(
                "notes.txt",
@@ -101,6 +146,7 @@ internal sealed class FakeSftpSession(SshConnectionRequest request) : ISftpSessi
                DateTimeOffset.UnixEpoch,
                "-rw-r--r--"),
        ]);
+    }

    /// <inheritdoc />
    public Task<SftpEntry?> StatAsync(string path, CancellationToken cancellationToken) =>
@@ -119,11 +165,20 @@ internal sealed class FakeSftpSession(SshConnectionRequest request) : ISftpSessi
        Task.CompletedTask;

    /// <inheritdoc />
-    public Task DeleteAsync(string path, CancellationToken cancellationToken) => Task.CompletedTask;
+    public Task DeleteAsync(string path, CancellationToken cancellationToken)
+    {
+        Deleted.Add(path);
+
+        return Task.CompletedTask;
+    }

    /// <inheritdoc />
-    public Task RenameAsync(string fromPath, string toPath, CancellationToken cancellationToken) =>
-        Task.CompletedTask;
+    public Task RenameAsync(string fromPath, string toPath, CancellationToken cancellationToken)
+    {
+        Renamed.Add((fromPath, toPath));
+
+        return Task.CompletedTask;
+    }

    /// <inheritdoc />
    public ValueTask DisposeAsync()
@@ -11,6 +11,7 @@ using DodoSSH.Client.Shell.ViewModels;
 using DodoSSH.Client.Ssh;
 using DodoSSH.Client.Storage;
 using DodoSSH.Client.Sync;
+using DodoSSH.Client.Transfer;
 using DodoSSH.Client.Terminal;
 using DodoSSH.Crypto;

@@ -143,7 +144,14 @@ public sealed class ShellFlowTests : IAsyncLifetime
            {
                clipboard.Add(text);
                return Task.CompletedTask;
-            });
+            },
+
+            // Inline, because this suite has no window and therefore no dispatcher to drain — the same
+            // answer TransferQueueingTests reached, and for the reason its own remark gives: reaching
+            // Dispatcher.UIThread from a test means asserting on a queue owned by whichever class touched
+            // it first. Running the action where it was raised takes the thread out of the question, and
+            // every phase this suite reports is raised on the thread doing the asserting anyway.
+            post: action => action());

        return ValueTask.CompletedTask;
    }
@@ -1303,6 +1311,119 @@ public sealed class ShellFlowTests : IAsyncLifetime
        shell.IsConnectingShowing.ShouldBeFalse();
    }

+    /// <remarks>
+    /// <para>
+    /// What the card draws while the stretch above is going on. The tab used to carry one line of prose
+    /// fixed at the moment it was created, which made a handshake stuck on a key exchange look exactly like
+    /// one stuck on a dead socket — and made a connection that was progressing look exactly like one that
+    /// was not.
+    /// </para>
+    /// <para>
+    /// The gate is held open on the step the fake reports before it, so this asserts the state the card is
+    /// actually drawn in rather than one it passes through: one step behind, one step lit, three not
+    /// reached. Nothing here waits or polls, which is the other half of the claim — the report arrives on
+    /// the thread that raised it and the tab is up to date in the same turn.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task Connecting_LightsTheStepTheHandshakeHasActuallyReached()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        await using var renderer = await FakeRenderer.AttachAsync(workspace, Token);
+
+        ssh.Gate = new TaskCompletionSource();
+        var connecting = vault.ConnectCommand.ExecuteAsync(null);
+
+        var tab = shell.Tabs.ShouldHaveSingleItem();
+
+        tab.Steps.Select(step => step.State).ShouldBe(
+        [
+            ConnectionStepState.Done,
+            ConnectionStepState.Running,
+            ConnectionStepState.Pending,
+            ConnectionStepState.Pending,
+            ConnectionStepState.Pending,
+        ],
+        "the renderer attached, the host is being reached, and nothing after that has happened");
+
+        tab.StepsDone.ShouldBe(1, "the track fills to what finished, and the running step is not half a step");
+        tab.Status.ShouldBe("Reaching the host");
+
+        ssh.Gate.SetResult();
+        await connecting;
+
+        tab.Steps.ShouldAllBe(step => step.IsDone, "a session that opened got through all of them");
+        tab.StepsDone.ShouldBe(tab.StepCount);
+    }
+
+    /// <remarks>
+    /// The half of the step list a progress bar could not do: where it stopped is kept, and the steps behind
+    /// it stay done. That is the difference between "that host is not there" and "that host is there and
+    /// would not have me", and it is the question the reason sentence alone often does not settle.
+    /// </remarks>
+    [Fact]
+    public async Task ARefusedConnection_KeepsTheStepItStoppedOn()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        await using var renderer = await FakeRenderer.AttachAsync(workspace, Token);
+
+        ssh.Failure = new InvalidOperationException("No route to host.");
+
+        await vault.ConnectCommand.ExecuteAsync(null);
+
+        var tab = shell.Tabs.ShouldHaveSingleItem();
+
+        tab.Steps.Select(step => step.State).ShouldBe(
+        [
+            ConnectionStepState.Done,
+            ConnectionStepState.Stopped,
+            ConnectionStepState.Pending,
+            ConnectionStepState.Pending,
+            ConnectionStepState.Pending,
+        ],
+        "it got as far as reaching the host and no further");
+
+        tab.Steps[1].Mark.ShouldBe("✕", "and says so without relying on the colour");
+
+        // The reason still goes where it always went. The list says how far, and this says what happened.
+        tab.Status.ShouldBe("No route to host.");
+    }
+
+    /// <remarks>
+    /// A report that arrives for an attempt the shell has forgotten. Giving up on a connecting tab removes
+    /// it while the handshake is still running — see <c>CloseTabAsync</c> — so every phase reported after
+    /// that has no tab to land on. Dropped rather than resurrecting the tab, and above all not thrown: the
+    /// handshake is still going, and its session is still adopted if it opens.
+    /// </remarks>
+    [Fact]
+    public async Task GivingUpOnATab_LeavesLaterPhasesWithNothingToDo()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        await using var renderer = await FakeRenderer.AttachAsync(workspace, Token);
+
+        ssh.Gate = new TaskCompletionSource();
+        var connecting = vault.ConnectCommand.ExecuteAsync(null);
+
+        var tab = shell.Tabs.ShouldHaveSingleItem();
+        await shell.CloseTabCommand.ExecuteAsync(tab);
+
+        // Everything after the gate — the host key, the credential, the shell — is reported to a shell that
+        // no longer has a tab for this attempt.
+        ssh.Gate.SetResult();
+        await connecting;
+
+        // The session opened anyway and was adopted, which is the behaviour giving up already promised.
+        var adopted = shell.Tabs.ShouldHaveSingleItem();
+        adopted.HasSession.ShouldBeTrue();
+        adopted.ShouldNotBe(tab);
+
+        // And the forgotten tab was left where it was rather than being advanced from the sidelines.
+        tab.Steps[1].IsRunning.ShouldBeTrue("nothing moved it on after the shell let go of it");
+    }
+
    /// <remarks>
    /// A refusal has to end up somewhere the user will see it, and by the time one arrives they are quite
    /// likely looking at another screen — which is exactly what not blocking bought. The tab is that place,
@@ -1645,6 +1766,28 @@ public sealed class ShellFlowTests : IAsyncLifetime
        shell.IsTerminalShowing.ShouldBeTrue();
    }

+    /// <remarks>
+    /// The palette searches a host's vault name, and only where the row prints it — which a session holding
+    /// one vault never does. Matching it anyway would answer "personal" with the entire keychain, ranked
+    /// behind nothing and explained by nothing on screen. See <c>MainWindowViewModel.Rank</c>.
+    /// </remarks>
+    [Fact]
+    public async Task ThePalette_DoesNotMatchTheVaultNameWhenThereIsOnlyOneVaultToBeIn()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        vault.VaultName.ShouldBe("Personal", "which is the word this test types");
+
+        shell.ToggleSearchCommand.Execute(null);
+
+        shell.SearchResults.ShouldHaveSingleItem()
+            .HasVaultBadge.ShouldBeFalse("one vault is nothing to tell apart");
+
+        shell.SearchText = "personal";
+
+        shell.SearchResults.ShouldBeEmpty();
+    }
+
    /// <remarks>
    /// The rail marks where you are, and a terminal is not one of its destinations. Lighting HOSTS while a
    /// terminal fills the window would point at a screen that is not showing — and the selected tab already
@@ -2341,6 +2484,7 @@ public sealed class ShellFlowTests : IAsyncLifetime
        await workspace.OpenSessionAsync(
            new SshConnectionRequest("host.invalid", 22, "dodo", new SshPasswordCredential("irrelevant")),
            TerminalSize.Default,
+            progress: null,
            Token);

        workspace.LiveSessionCount.ShouldBe(1);
@@ -2980,6 +3124,161 @@ public sealed class ShellFlowTests : IAsyncLifetime
        vault.Hosts[0].Host.CredentialId.ShouldBeNull();
    }

+    /// <remarks>
+    /// The moment a credential is wanted is the moment somebody is choosing how a host authenticates and
+    /// finds it is not in the keychain yet, so the host editor makes one. Selecting it has to survive the
+    /// reload the write triggers, which is the part that needs a test: the refill rebuilds the picker from
+    /// the vault and restores it from the editor's own selection, so the binding is written before the
+    /// reload rather than after it.
+    /// </remarks>
+    [Fact]
+    public async Task ACredentialMadeInTheHostEditor_BindsTheHostToIt()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.IsAddingEditorCredential.ShouldBeTrue();
+
+        vault.EditorNewCredentialLabel = "pg-primary";
+        vault.EditorNewCredentialUsername = "postgres";
+        vault.EditorNewCredentialPassword = "s3cret";
+        vault.EditorNewCredentialNotes = "rotated quarterly";
+
+        await vault.AddEditorCredentialCommand.ExecuteAsync(null);
+
+        var credential = vault.Credentials.ShouldHaveSingleItem();
+        credential.Credential.Username.ShouldBe("postgres");
+        credential.Credential.Notes.ShouldBe("rotated quarterly");
+
+        vault.IsAddingEditorCredential.ShouldBeFalse("the form closes once the credential is in the keychain");
+        vault.EditorNewCredentialPassword.ShouldBeEmpty("the form must not go on holding the password");
+
+        vault.EditorSelectedAuthentication.ShouldNotBeNull().EntityId.ShouldBe(
+            credential.EntityId,
+            "the picker has to land on the credential that was just made, through the reload");
+
+        await vault.SaveHostCommand.ExecuteAsync(null);
+
+        vault.Hosts.ShouldHaveSingleItem().Host.CredentialId.ShouldBe(credential.EntityId);
+        vault.Hosts[0].Host.SshKeyId.ShouldBeNull();
+    }
+
+    /// <remarks>
+    /// The honest consequence of writing immediately, and the same one the new-tag box already carries: a
+    /// credential is a shared item with an id, the host can only name an id that exists, so the credential
+    /// was never part of the host to begin with. What was still being typed is a different matter — that
+    /// includes a password, and it goes with the editor it was typed into.
+    /// </remarks>
+    [Fact]
+    public async Task CancellingTheHostEditor_KeepsTheCredentialItMade_AndDropsWhatWasStillBeingTyped()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.EditorNewCredentialLabel = "pg-primary";
+        vault.EditorNewCredentialPassword = "s3cret";
+
+        await vault.AddEditorCredentialCommand.ExecuteAsync(null);
+
+        // A second one, opened and left half-typed.
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.EditorNewCredentialLabel = "half";
+        vault.EditorNewCredentialPassword = "typed-but-never-added";
+        vault.EditorNewCredentialNotes = "half a thought";
+
+        vault.CancelEditCommand.Execute(null);
+
+        vault.Credentials.ShouldHaveSingleItem().Label.ShouldBe("pg-primary");
+
+        vault.IsAddingEditorCredential.ShouldBeFalse();
+        vault.EditorNewCredentialLabel.ShouldBeEmpty();
+        vault.EditorNewCredentialNotes.ShouldBeEmpty();
+        vault.EditorNewCredentialPassword.ShouldBeEmpty(
+            "a password typed into an abandoned form must not survive behind the next host");
+
+        vault.Hosts.ShouldHaveSingleItem().Host.CredentialId.ShouldBeNull(
+            "the binding itself was never saved");
+    }
+
+    /// <remarks>
+    /// Why this form has fields of its own rather than reusing the keychain screen's four.
+    /// <c>IsEditingCredential</c> is what <c>AVaultEditorIsInTheWay</c> asks about, so sharing it would make
+    /// the whole Vault screen refuse to open an editor, with a sentence naming a form the user cannot see
+    /// on a screen they are not looking at. That is the exact failure the guard was split in two to end.
+    /// </remarks>
+    [Fact]
+    public async Task TheHostEditorsCredentialForm_DoesNotBlockTheKeychainsOwnEditors()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+        vault.BeginEditorCredentialCommand.Execute(null);
+
+        vault.NewCredentialCommand.Execute(null);
+
+        vault.IsEditingCredential.ShouldBeTrue(
+            "the keychain's editor lives on another screen and opens regardless");
+    }
+
+    /// <remarks>
+    /// Where this deliberately parts from the new-tag box beside it, which offers an existing tag rather
+    /// than repeating it. Two tags called "staging" are one intention spelled twice; two credentials called
+    /// "root" are two different passwords, and quietly binding the host to whichever was there already
+    /// would authenticate it as an account nobody chose.
+    /// </remarks>
+    [Fact]
+    public async Task ACredentialMadeInTheHostEditor_UnderANameAlreadyTaken_IsASecondCredential()
+    {
+        var vault = await ReadyToConnectAsync();
+        await AddCredentialAsync(vault, "root", password: "first");
+
+        var first = vault.Credentials.ShouldHaveSingleItem().EntityId;
+
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.EditorNewCredentialLabel = "root";
+        vault.EditorNewCredentialPassword = "second";
+
+        await vault.AddEditorCredentialCommand.ExecuteAsync(null);
+
+        vault.Credentials.Count.ShouldBe(2);
+
+        vault.EditorSelectedAuthentication.ShouldNotBeNull().EntityId.ShouldNotBe(
+            first,
+            "binding to the credential that happened to share the name would be the wrong password");
+    }
+
+    /// <remarks>
+    /// The same refusal <c>CredentialSecret.TryValidate</c> gives the keychain's editor, reaching the user
+    /// here rather than producing an item that looks usable and fails at the handshake.
+    /// </remarks>
+    [Fact]
+    public async Task ACredentialMadeInTheHostEditor_WithNoPassword_IsRefused()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        vault.SelectedHost = vault.Hosts[0];
+        vault.EditSelectedHostCommand.Execute(null);
+
+        vault.BeginEditorCredentialCommand.Execute(null);
+        vault.EditorNewCredentialLabel = "pg-primary";
+
+        await vault.AddEditorCredentialCommand.ExecuteAsync(null);
+
+        vault.Credentials.ShouldBeEmpty();
+        vault.IsAddingEditorCredential.ShouldBeTrue("the form stays open on what it refused");
+        vault.Status.ShouldContain("password");
+    }
+
    /// <remarks>
    /// Tags reach the same editor by a different route — the keychain screen rather than the box under the
    /// chips — and a chip that only appeared on the next open would send the user round the same detour.
@@ -6222,12 +6521,68 @@ public sealed class ShellFlowTests : IAsyncLifetime
        shell.IsTerminalShowing.ShouldBeTrue();
    }

+    /// <remarks>
+    /// v5c-4 retired the session shell's own header row and moved its cross-surface button into the sidebar,
+    /// where one control is drawn on both surfaces — so the two directions above are reached through one
+    /// command and one label, resolved by the shell. This is that resolution: the same two outcomes the two
+    /// tests above assert, from the row a user actually clicks now.
+    /// </remarks>
+    [Fact]
+    public async Task TheSidebarsCrossSurfaceRow_NamesAndOpensWhicheverSurfaceIsNotShowing()
+    {
+        await ConnectedHostWithAPinAsync();
+
+        shell.IsTerminalSurface.ShouldBeTrue();
+        shell.SessionCrossSurfaceLabel.ShouldBe("Open SFTP");
+
+        await shell.OpenOtherSurfaceCommand.ExecuteAsync(null);
+
+        shell.IsTransfersShowing.ShouldBeTrue();
+        shell.Transfers.SelectedHost.ShouldNotBeNull().Label.ShouldBe("prod-db");
+        shell.SessionCrossSurfaceLabel.ShouldBe("Open terminal", "the row turns over with the surface");
+
+        var tabsBefore = shell.Tabs.Count;
+
+        await shell.OpenOtherSurfaceCommand.ExecuteAsync(null);
+
+        shell.Tabs.Count.ShouldBe(tabsBefore + 1, "the other direction dials a terminal at the browsed host");
+        shell.IsTerminalShowing.ShouldBeTrue();
+    }
+
+    /// <remarks>
+    /// Closing the sidebar is a preference about this machine, so it outlives the window — see
+    /// <c>ClientSettings.SessionSidebarOpen</c>. Asserted against the store rather than against a second
+    /// shell built over the same profile: what a fresh launch reads is exactly what is on disk, and building
+    /// another shell here would prove the constructor twice and the storage once.
+    /// </remarks>
+    [Fact]
+    public async Task ClosingTheSidebar_IsRememberedForTheNextLaunch()
+    {
+        await ConnectedHostWithAPinAsync();
+
+        shell.IsSessionSidebarOpen.ShouldBeTrue("open is the default, and nothing has closed it");
+
+        shell.ToggleSessionSidebarCommand.Execute(null);
+
+        shell.IsSessionSidebarOpen.ShouldBeFalse();
+        new ClientSettingsStore(paths).Read().SessionSidebarOpen.ShouldBeFalse();
+
+        shell.ToggleSessionSidebarCommand.Execute(null);
+
+        shell.IsSessionSidebarOpen.ShouldBeTrue();
+        new ClientSettingsStore(paths).Read().SessionSidebarOpen.ShouldBeTrue("and reopening is remembered too");
+    }
+
    /// <remarks>
    /// The sidebar's SNIPS row, wired through <c>SnippetsViewModel.InsertCommand</c> rather than a second
    /// insert path — see the deviation recorded on <c>MainWindowViewModel.InsertSnippetCommand</c>. Proven
    /// through a real connected tab and a real renderer, the same fixture <c>InsertingASnippet_...</c> above
    /// uses for the standalone screen, because what is worth proving here is that the shell's command reaches
    /// that same mechanism rather than reimplementing it.
+    ///
+    /// The focus request is asserted here rather than in a test of its own because it is part of what this
+    /// click does: the row that typed the command took the keyboard with it, and only the window can give it
+    /// back. See <c>MainWindowViewModel.TerminalFocusRequested</c>.
    /// </remarks>
    [Fact]
    public async Task InsertingASnippetFromTheSidebarTypesItIntoTheSelectedTab()
@@ -6239,9 +6594,38 @@ public sealed class ShellFlowTests : IAsyncLifetime

        var row = snippets.Visible.ShouldHaveSingleItem();

+        var focusRequests = 0;
+        shell.TerminalFocusRequested += (_, _) => focusRequests++;
+
        await shell.InsertSnippetCommand.ExecuteAsync(row);

        snippets.Selected.ShouldBe(row, "the sidebar row picks the same selection INSERT reads");
+        focusRequests.ShouldBe(1, "the keyboard goes back to the terminal the command landed in");
+    }
+
+    /// <remarks>
+    /// The other half of the rule above: nothing was typed, so nothing asks for the keyboard. A snip clicked
+    /// with no terminal to put it in lands on the snippets screen instead — see
+    /// <c>MainWindowViewModel.InsertSnippetCommand</c> — and stealing focus into a collapsed WebView on the
+    /// way would leave that screen unable to be typed on.
+    /// </remarks>
+    [Fact]
+    public async Task InsertingASnippetWithNothingToInsertInto_DoesNotAskForTheTerminal()
+    {
+        await UnlockedAsync();
+
+        var snippets = shell.SnippetsScreen.ShouldNotBeNull();
+        await AddSnippetAsync(snippets, "uptime", "uptime", runs: false);
+
+        var row = snippets.Visible.ShouldHaveSingleItem();
+
+        var focusRequests = 0;
+        shell.TerminalFocusRequested += (_, _) => focusRequests++;
+
+        await shell.InsertSnippetCommand.ExecuteAsync(row);
+
+        shell.Screen.ShouldBe(ShellScreen.Snippets);
+        focusRequests.ShouldBe(0);
    }

    [Fact]
@@ -7957,6 +8341,7 @@ public sealed class ShellFlowTests : IAsyncLifetime
        await workspace.OpenSessionAsync(
            new SshConnectionRequest("host.invalid", 22, "dodo", new SshPasswordCredential("irrelevant")),
            TerminalSize.Default,
+            progress: null,
            Token);

        shell.SignOutCommand.Execute(null);
@@ -8165,6 +8550,233 @@ public sealed class ShellFlowTests : IAsyncLifetime
        raised.ShouldBeGreaterThan(0);
    }

+    // ---- ◆ The path box, and the three things that can be done to a row ----
+
+    /// <remarks>
+    /// The way out of the breadcrumb's own reach. It can only offer what is under the directory already
+    /// listed, so before this box existed a path on the other side of the filesystem cost a walk to the
+    /// common ancestor and back down — a round trip a level — and one somebody already knew could not be
+    /// entered at all.
+    /// </remarks>
+    [Fact]
+    public async Task TypingAnAbsolutePathOnTheTransfersScreen_ListsIt()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.RemotePathDraft = "/etc/nginx";
+
+        await shell.Transfers.GoToTypedRemotePathCommand.ExecuteAsync(null);
+
+        shell.Transfers.RemotePath.ShouldBe("/etc/nginx");
+        sftp.Listed[^1].ShouldBe("/etc/nginx");
+    }
+
+    /// <remarks>
+    /// Relative to the pane rather than to the session's own working directory, which is the distinction
+    /// <see cref="SftpPath.Resolve"/> exists for: handing the server a relative path would resolve it
+    /// somewhere the breadcrumb above the box did not predict.
+    /// </remarks>
+    [Theory]
+    [InlineData("logs", "/home/deploy/logs")]
+    [InlineData("../shared", "/home/shared")]
+    [InlineData("~/.ssh", "/home/deploy/.ssh")]
+    public async Task TypingARelativePathOnTheTransfersScreen_TakesItFromWhereThePaneIs(
+        string typed, string expected)
+    {
+        await ConnectedTransfersAsync();
+
+        shell.Transfers.RemotePath.ShouldBe("/home/deploy", "the fake opens on the account's home");
+        shell.Transfers.RemotePathDraft = typed;
+
+        await shell.Transfers.GoToTypedRemotePathCommand.ExecuteAsync(null);
+
+        shell.Transfers.RemotePath.ShouldBe(expected);
+    }
+
+    /// <remarks>
+    /// Somebody who cleared the box and pressed Enter has not asked for anything, and the root is a long way
+    /// from where they were standing.
+    /// </remarks>
+    [Fact]
+    public async Task ClearingThePathBox_PutsThePathBackRatherThanGoingToTheRoot()
+    {
+        await ConnectedTransfersAsync();
+
+        shell.Transfers.RemotePathDraft = "  ";
+
+        await shell.Transfers.GoToTypedRemotePathCommand.ExecuteAsync(null);
+
+        shell.Transfers.RemotePath.ShouldBe("/home/deploy");
+        shell.Transfers.RemotePathDraft.ShouldBe("/home/deploy");
+    }
+
+    /// <remarks>
+    /// Renaming asks first and then acts on the path the question named, not on the selection — the promise
+    /// <c>ConfirmDeleteRemoteAsync</c> already makes, kept here for the same reason: nothing between opening
+    /// the form and pressing its button may re-point it at another file.
+    /// </remarks>
+    [Fact]
+    public async Task RenamingARemoteEntry_KeepsItInPlaceUnderTheNewName()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.RenameRemoteCommand.Execute(null);
+
+        shell.Transfers.IsMovingRemote.ShouldBeTrue();
+        shell.Transfers.RemoteMoveTarget.ShouldBe("notes.txt", "it opens on the name that changes nothing");
+
+        shell.Transfers.RemoteMoveTarget = "notes.md";
+
+        await shell.Transfers.ConfirmMoveRemoteCommand.ExecuteAsync(null);
+
+        sftp.Renamed.ShouldHaveSingleItem().ShouldBe(("/home/deploy/notes.txt", "/home/deploy/notes.md"));
+        shell.Transfers.IsMovingRemote.ShouldBeFalse();
+    }
+
+    /// <remarks>
+    /// A separator in a name is a move wearing a rename's clothing, and the server would answer it with "no
+    /// such file" about a directory nobody meant to name. The form stays open, because what has to be
+    /// corrected is what was typed into it.
+    /// </remarks>
+    [Fact]
+    public async Task RenamingToANameWithASeparatorInIt_IsRefusedAndTheFormStaysOpen()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.RenameRemoteCommand.Execute(null);
+        shell.Transfers.RemoteMoveTarget = "archive/notes.txt";
+
+        await shell.Transfers.ConfirmMoveRemoteCommand.ExecuteAsync(null);
+
+        sftp.Renamed.ShouldBeEmpty();
+        shell.Transfers.IsMovingRemote.ShouldBeTrue();
+        shell.Transfers.Status.ShouldContain("cannot contain");
+    }
+
+    /// <remarks>
+    /// A move keeps the name and changes the directory, which is the half of the pair a rename cannot do.
+    /// The destination is resolved the way the path box's is, so <c>../shared</c> means what it would mean
+    /// in a shell rather than being handed to the server as typed.
+    /// </remarks>
+    [Fact]
+    public async Task MovingARemoteEntry_KeepsItsNameAndTakesTheTypedDirectory()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.MoveRemoteCommand.Execute(null);
+
+        shell.Transfers.RemoteMoveTarget.ShouldBe("/home/deploy", "it opens on the directory it is in");
+
+        shell.Transfers.RemoteMoveTarget = "../shared";
+
+        await shell.Transfers.ConfirmMoveRemoteCommand.ExecuteAsync(null);
+
+        sftp.Renamed.ShouldHaveSingleItem().ShouldBe(("/home/deploy/notes.txt", "/home/shared/notes.txt"));
+    }
+
+    /// <remarks>
+    /// The destination that changes nothing. SFTP would answer it with success and a file that had not
+    /// moved, which reads as a move that silently did not happen.
+    /// </remarks>
+    [Fact]
+    public async Task MovingARemoteEntryIntoTheDirectoryItIsAlreadyIn_IsRefused()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.MoveRemoteCommand.Execute(null);
+
+        await shell.Transfers.ConfirmMoveRemoteCommand.ExecuteAsync(null);
+
+        sftp.Renamed.ShouldBeEmpty();
+        shell.Transfers.Status.ShouldContain("already there");
+    }
+
+    /// <remarks>
+    /// The three questions are one at a time by construction — each one's own opening clears the others — so
+    /// that no row can have two forms open over it and no button can arm a second question behind the first.
+    /// </remarks>
+    [Fact]
+    public async Task OpeningTheRenameForm_TakesAwayADeletionThatWasBeingAskedAbout()
+    {
+        await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.DeleteRemoteCommand.Execute(null);
+        shell.Transfers.IsConfirmingRemoteDeletion.ShouldBeTrue();
+
+        shell.Transfers.RenameRemoteCommand.Execute(null);
+
+        shell.Transfers.IsConfirmingRemoteDeletion.ShouldBeFalse();
+        shell.Transfers.IsMovingRemote.ShouldBeTrue();
+        shell.Transfers.CanDeleteRemote.ShouldBeFalse("a question is on screen");
+    }
+
+    /// <remarks>
+    /// The pane used to go on showing the directory as it was before the file arrived, so the only way to
+    /// see something this application had just sent was to press REFRESH — the application asking to be
+    /// told about what it had done itself.
+    /// </remarks>
+    [Fact]
+    public async Task AnUploadThatLandsInTheDirectoryShowing_ReReadsItWithoutBeingAsked()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        var before = sftp.Listed.Count;
+
+        shell.Transfers.NoteTransferLanded(Landed("/home/deploy/build.tar.gz"));
+
+        sftp.Listed.Count.ShouldBe(before + 1);
+        sftp.Listed[^1].ShouldBe("/home/deploy");
+        shell.Transfers.RemoteListingIsStale.ShouldBeFalse();
+    }
+
+    /// <remarks>
+    /// Only the directory on screen. A queue moving a hundred files into somewhere nobody is looking at
+    /// would otherwise be a round trip per file for a listing that changed nothing anybody can see.
+    /// </remarks>
+    [Fact]
+    public async Task AnUploadThatLandsSomewhereElse_ChangesNothingOnScreen()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        var before = sftp.Listed.Count;
+
+        shell.Transfers.NoteTransferLanded(Landed("/srv/releases/build.tar.gz"));
+
+        sftp.Listed.Count.ShouldBe(before);
+        shell.Transfers.RemoteListingIsStale.ShouldBeFalse();
+    }
+
+    /// <remarks>
+    /// The refresh waits rather than interrupting. Re-listing under an open question is how the row somebody
+    /// answered about stops being the row that gets acted on — so the staleness is remembered and settled
+    /// when the question goes.
+    /// </remarks>
+    [Fact]
+    public async Task AnUploadThatLandsWhileAQuestionIsOpen_WaitsForItToBeAnswered()
+    {
+        var sftp = await ConnectedTransfersAsync();
+
+        shell.Transfers.SelectedRemoteEntry = shell.Transfers.RemoteEntries[0];
+        shell.Transfers.DeleteRemoteCommand.Execute(null);
+
+        var before = sftp.Listed.Count;
+
+        shell.Transfers.NoteTransferLanded(Landed("/home/deploy/build.tar.gz"));
+
+        sftp.Listed.Count.ShouldBe(before, "nothing may pull the listing out from under an open question");
+        shell.Transfers.RemoteListingIsStale.ShouldBeTrue();
+
+        await shell.Transfers.CancelDeleteRemoteCommand.ExecuteAsync(null);
+
+        sftp.Listed.Count.ShouldBe(before + 1);
+        shell.Transfers.RemoteListingIsStale.ShouldBeFalse();
+    }
+
    /// <remarks>
    /// A bucket is an <c>IRemoteFileStore</c> with no <c>HostSecret</c> underneath it, so there is no
    /// <c>PinnedPaths</c> to read at all — see <see cref="TransfersViewModel.OpenBucketAsync"/>'s own remark.
@@ -8770,4 +9382,39 @@ public sealed class ShellFlowTests : IAsyncLifetime

        return vault;
    }
+
+    /// <summary>A transfers screen connected to the fixture's host, and the session it opened.</summary>
+    private async Task<FakeSftpSession> ConnectedTransfersAsync()
+    {
+        var vault = await ReadyToConnectAsync();
+
+        shell.Transfers.Attach(vault, knownHosts);
+        shell.Transfers.SelectedHost = shell.Transfers.Hosts[0];
+
+        await shell.Transfers.ConnectCommand.ExecuteAsync(null);
+
+        shell.Transfers.IsConnected.ShouldBeTrue(shell.Transfers.Status);
+
+        return ssh.OpenedSftp.ShouldNotBeNull();
+    }
+
+    /// <summary>An upload that has just finished, as the queue would report it.</summary>
+    /// <remarks>
+    /// Built here rather than run through <c>FileTransferQueue</c>, because what is asserted is what the
+    /// screen does when a transfer lands and not that a transfer can land: the queue's own path from
+    /// enqueued to completed is covered against a fuller fake in <c>DodoSSH.Client.Transfer.Tests</c>, and
+    /// running one here would put a thread-pool hand-off and this fixture's own dispatcher-less posting
+    /// between the event and the assertion.
+    /// </remarks>
+    private static TransferSnapshot Landed(string remotePath) => new(
+        Guid.CreateVersion7(),
+        TransferDirection.Upload,
+        SftpPath.Name(remotePath),
+        Path.Combine(Path.GetTempPath(), SftpPath.Name(remotePath)),
+        remotePath,
+        128,
+        128,
+        TransferState.Completed,
+        BytesPerSecond: 0,
+        Failure: null);
 }
@@ -1,6 +1,7 @@
 using System.Collections.Concurrent;
 using DodoSSH.Client.Shell.ViewModels;
 using DodoSSH.Client.Ssh;
+using DodoSSH.Client.Transfer;
 using NSubstitute;

 namespace DodoSSH.Client.App.Tests;
@@ -281,6 +282,71 @@ public sealed class TransferQueueingTests : IDisposable
        delivered.ShouldBe(0);
    }

+    /// <remarks>
+    /// <para>
+    /// The local half of the automatic refresh. A download that finished left this pane showing the folder
+    /// as it was before the file arrived, so the file this application had just fetched was not in the
+    /// listing it was fetched into — and the way to see it was to press REFRESH.
+    /// </para>
+    /// <para>
+    /// Synchronous, unlike its remote counterpart, and that is the whole reason it is nothing more than a
+    /// re-read where it stands: a local listing is a filesystem call, so there is no round trip to defer and
+    /// no busy state to wait out. See <c>TransfersViewModel.SettleRemoteListingAsync</c> for the other side.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public void ADownloadThatLandsInTheFolderShowing_ReReadsItWithoutBeingAsked()
+    {
+        Connected();
+
+        transfers.RefreshLocalCommand.Execute(null);
+        transfers.LocalEntries.ShouldBeEmpty();
+
+        var landed = File("fetched.bin");
+
+        transfers.NoteTransferLanded(new TransferSnapshot(
+            Guid.CreateVersion7(),
+            TransferDirection.Download,
+            "fetched.bin",
+            landed,
+            "/srv/app/fetched.bin",
+            128,
+            128,
+            TransferState.Completed,
+            BytesPerSecond: 0,
+            Failure: null));
+
+        transfers.LocalEntries.Select(row => row.Name).ShouldBe(["fetched.bin"]);
+    }
+
+    /// <remarks>
+    /// Only the folder on screen, for the reason its remote counterpart gives: a queue writing into
+    /// somewhere nobody is looking at would otherwise re-read a directory per completed transfer.
+    /// </remarks>
+    [Fact]
+    public void ADownloadThatLandsSomewhereElse_ChangesNothingOnScreen()
+    {
+        Connected();
+
+        transfers.RefreshLocalCommand.Execute(null);
+
+        File("elsewhere.bin");
+
+        transfers.NoteTransferLanded(new TransferSnapshot(
+            Guid.CreateVersion7(),
+            TransferDirection.Download,
+            "elsewhere.bin",
+            Path.Combine(Path.GetTempPath(), "somewhere-else", "elsewhere.bin"),
+            "/srv/app/elsewhere.bin",
+            128,
+            128,
+            TransferState.Completed,
+            BytesPerSecond: 0,
+            Failure: null));
+
+        transfers.LocalEntries.ShouldBeEmpty();
+    }
+
    /// <summary>The queue's rows, once the posts that create them have been let run.</summary>
    /// <remarks>
    /// <c>TransfersViewModel</c> adds a row from the transfer queue's own <c>Changed</c> event, which it
@@ -403,6 +403,46 @@ public sealed class UpdateFlowTests : IDisposable
        channel.Checks.ShouldBe(1);
    }

+    /// <remarks>
+    /// <para>
+    /// The loop rather than <c>CheckOnceAsync</c>, which is the one thing the rest of this file avoids
+    /// driving — and here it is the whole point, because the claim is about when the first pass happens
+    /// rather than about what it does. The first pass used to wait two minutes, which meant a client opened
+    /// to reach one host and closed again never asked at all.
+    /// </para>
+    /// <para>
+    /// It waits on the pass and not on a clock, so there is nothing here to be flaky about: a regression
+    /// that puts a delay back in front of the loop does not fail on a margin, it spins until the suite's own
+    /// cancellation ends it.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task TheFirstPassRunsAtStart_RatherThanOnADelay()
+    {
+        channel.Available = new AvailableUpdate("1.3.0");
+
+        var updates = Build();
+        await using var _ = updates.ConfigureAwait(false);
+
+        updates.Start();
+
+        while (updates.State is not UpdateState.Ready)
+        {
+            Token.ThrowIfCancellationRequested();
+
+            await Task.Yield();
+        }
+
+        channel.Checks.ShouldBe(1);
+        updates.ReadyVersion.ShouldBe("1.3.0");
+    }
+
+    /// <remarks>
+    /// Started and disposed with nothing in between, which since the first pass stopped waiting two minutes
+    /// is a race rather than a formality: the loop may be anywhere between its yield and a finished check
+    /// when the cancellation lands. What is asserted is what matters either way — that disposing returns,
+    /// rather than waiting on a pass that will never be allowed to finish.
+    /// </remarks>
    [Fact]
    public async Task DisposingStopsTheLoop()
    {
@@ -766,6 +766,59 @@ public sealed class VaultSharingTests : IAsyncLifetime
        vault.Status.ShouldContain("left alone", Case.Insensitive);
    }

+    /// <remarks>
+    /// <para>
+    /// The palette reaches every vault the session holds a key for, so the vault's name is one of the things
+    /// somebody can reasonably type into it: "show me the team's machines" is a question a list spanning two
+    /// vaults invites, and until now the only answer was to know one of the machines by name already.
+    /// </para>
+    /// <para>
+    /// The order is the assertion that matters. A vault name is the widest of the three readings — one word
+    /// matches every host in that vault at once — so the host whose own name carries the word has to come
+    /// first, or typing a machine's name would bury it under everybody else's.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task ThePalette_FindsAHostByItsVaultsName_BehindOneCalledThatItself()
+    {
+        await UnlockedAsync();
+
+        var vaults = shell.Vaults;
+
+        await CreateVaultAsync(vaults, "Platform secrets");
+
+        var vault = shell.Vault!;
+        var sharedVaultId = vaults.SelectedVault!.VaultId;
+
+        await vault.LoadAsync(Token);
+
+        vault.NewHostCommand.Execute(null);
+        vault.EditorLabel = "platform-gateway";
+        vault.EditorHostname = "gateway.internal";
+
+        await vault.SaveHostCommand.ExecuteAsync(null);
+
+        vault.NewHostCommand.Execute(null);
+        vault.EditorSelectedVault =
+            vault.EditorVaultChoices.Single(choice => choice.VaultId == sharedVaultId);
+        vault.EditorLabel = "prod-db";
+        vault.EditorHostname = "db.internal";
+
+        await vault.SaveHostCommand.ExecuteAsync(null);
+
+        vault.IsEditing.ShouldBeFalse(vault.Status);
+
+        shell.ToggleSearchCommand.Execute(null);
+        shell.SearchText = "platform";
+
+        shell.SearchResults
+            .Select(row => row.Label)
+            .ShouldBe(["platform-gateway", "prod-db"], "a host's own name outranks its vault's");
+
+        shell.SearchResults[1].VaultBadge.ShouldBe(
+            "PLATFORM SECRETS", "and the row says what it was found by");
+    }
+
    /// <summary>
    /// Two hosts for the run above: one in the personal vault under a group, one already in the destination.
    /// </summary>
@@ -540,7 +540,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -652,9 +652,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "CommunityToolkit.Mvvm": {
        "type": "CentralTransitive",
@@ -760,11 +760,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      },
@@ -229,7 +229,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "AWSSDK.Core": {
@@ -249,9 +249,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -270,11 +270,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -340,7 +340,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.storage": {
@@ -379,9 +379,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "EFCore.NamingConventions": {
        "type": "CentralTransitive",
@@ -481,11 +481,11 @@
      },
      "SSH.NET": {
        "type": "CentralTransitive",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      }
@@ -73,7 +73,8 @@ public sealed class KeyAuthenticationTests(SshServerFixture fixture)
        var factory = new SshNetConnectionFactory(knownHosts);

        await Should.ThrowAsync<SshAuthenticationException>(async () =>
-            await factory.ConnectAsync(Request(new SshPrivateKeyCredential(Pkcs1(stranger), null)), Token));
+            await factory.ConnectAsync(
+                Request(new SshPrivateKeyCredential(Pkcs1(stranger), null)), progress: null, Token));
    }

    [Fact]
@@ -125,6 +126,86 @@ public sealed class KeyAuthenticationTests(SshServerFixture fixture)
        shell.IsOpen.ShouldBeTrue();
    }

+    /// <remarks>
+    /// <para>
+    /// The claim the connecting card is built on, checked where it can actually be checked: against a real
+    /// handshake rather than a fake that reports whatever it was written to report. Every other test of the
+    /// step list asserts that the shell draws what it is told; this one asserts that what it is told is
+    /// true.
+    /// </para>
+    /// <para>
+    /// The order is the assertion. A step list is only readable if the reports arrive in the order it draws
+    /// them, and the middle one is the load-bearing part — <see cref="SshConnectionPhase.CheckingHostKey"/>
+    /// comes out of SSH.NET's <c>HostKeyReceived</c>, which is the single interior moment the library gives
+    /// anybody, and it has to land between the other two rather than beside them.
+    /// </para>
+    /// <para>
+    /// <see cref="SshConnectionPhase.OpeningShell"/> is deliberately absent: this factory's work ends with
+    /// an authenticated connection, and the phase for opening a channel on one belongs to the layer that
+    /// opens it. <c>TerminalWorkspaceTests</c> covers that half.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task AHandshake_ReportsItsPhasesInTheOrderTheyHappen()
+    {
+        var knownHosts = await TrustedStoreAsync();
+        var reported = new List<SshConnectionPhase>();
+
+        await using var connection = await new SshNetConnectionFactory(knownHosts).ConnectAsync(
+            Request(new SshPrivateKeyCredential(Pkcs1(fixture.ClientKey), Passphrase: null)),
+            new DelegateProgress<SshConnectionPhase>(phase =>
+            {
+                lock (reported)
+                {
+                    // Locked because the last two are reported from SSH.NET's own handshake thread rather
+                    // than from the awaiting one, which is the whole reason the shell marshals them.
+                    reported.Add(phase);
+                }
+            }),
+            Token);
+
+        connection.IsConnected.ShouldBeTrue();
+
+        lock (reported)
+        {
+            reported.ShouldBe(
+            [
+                SshConnectionPhase.Reaching,
+                SshConnectionPhase.CheckingHostKey,
+                SshConnectionPhase.Authenticating,
+            ]);
+        }
+    }
+
+    /// <remarks>
+    /// The other half of the phase contract, and the one that would be easy to get wrong by reporting
+    /// optimistically: a refused key stops at the check. Nothing may claim the credential was offered, and
+    /// against an unknown host nothing ever is — the gate returns false and SSH.NET abandons the handshake
+    /// before authentication.
+    /// </remarks>
+    [Fact]
+    public async Task AHostKeyRefusal_NeverClaimsToHaveAuthenticated()
+    {
+        var reported = new List<SshConnectionPhase>();
+
+        await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
+            await new SshNetConnectionFactory(new InMemoryKnownHostStore()).ConnectAsync(
+                Request(new SshPasswordCredential(SshServerFixture.Password)),
+                new DelegateProgress<SshConnectionPhase>(phase =>
+                {
+                    lock (reported)
+                    {
+                        reported.Add(phase);
+                    }
+                }),
+                Token));
+
+        lock (reported)
+        {
+            reported.ShouldBe([SshConnectionPhase.Reaching, SshConnectionPhase.CheckingHostKey]);
+        }
+    }
+
    private static byte[] Pkcs1(RSA key) => Encoding.UTF8.GetBytes(key.ExportRSAPrivateKeyPem());

    private static byte[] Pkcs8(RSA key) => Encoding.UTF8.GetBytes(key.ExportPkcs8PrivateKeyPem());
@@ -141,7 +222,7 @@ public sealed class KeyAuthenticationTests(SshServerFixture fixture)
        // Learned by being refused, which is the only way this client learns a host key.
        var unknown = await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
            await factory.ConnectAsync(
-                Request(new SshPasswordCredential(SshServerFixture.Password)), Token));
+                Request(new SshPasswordCredential(SshServerFixture.Password)), progress: null, Token));

        await knownHosts.TrustAsync(unknown.Presentation, Token);

@@ -153,6 +234,6 @@ public sealed class KeyAuthenticationTests(SshServerFixture fixture)
        var knownHosts = await TrustedStoreAsync();

        return await new SshNetConnectionFactory(knownHosts)
-            .ConnectAsync(Request(credential), Token);
+            .ConnectAsync(Request(credential), progress: null, Token);
    }
 }
@@ -137,3 +137,14 @@ public sealed class KnownHostStoreTests
        string fingerprint = "SHA256:approved") =>
        new(host, port, algorithm, fingerprint);
 }
+
+/// <summary>An <see cref="IProgress{T}"/> that runs its callback on the thread that reported.</summary>
+/// <remarks>
+/// <c>System.Progress&lt;T&gt;</c> posts to a captured synchronisation context, or to the thread pool when
+/// there is none — which is what a test has here — so a list it appended to would be asserted on before it
+/// had been written. The same reason the shell does not use it either; see <c>VaultViewModel.ReporterFor</c>.
+/// </remarks>
+internal sealed class DelegateProgress<T>(Action<T> report) : IProgress<T>
+{
+    public void Report(T value) => report(value);
+}
@@ -66,7 +66,7 @@ public sealed class LoopbackProxyTests(SshServerFixture fixture)
        var factory = new SshNetConnectionFactory(knownHosts);

        var unknown = await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
-            await factory.ConnectAsync(request, Token));
+            await factory.ConnectAsync(request, progress: null, Token));

        unknown.Presentation.Host.ShouldBe(InternalHost, "the target's name, not the proxy's");
        unknown.Presentation.Port.ShouldBe(SshServerFixture.InternalPort);
@@ -75,7 +75,7 @@ public sealed class LoopbackProxyTests(SshServerFixture fixture)

        await knownHosts.TrustAsync(unknown.Presentation, Token);

-        await using var connection = await factory.ConnectAsync(request, Token);
+        await using var connection = await factory.ConnectAsync(request, progress: null, Token);

        connection.IsConnected.ShouldBeTrue();
        connection.HostKey.Host.ShouldBe(InternalHost);
@@ -121,7 +121,8 @@ public sealed class LoopbackProxyTests(SshServerFixture fixture)
        var request = Request(Credential(), new SshLoopbackProxy(DeadPort()));

        var failure = await Should.ThrowAsync<Exception>(async () =>
-            await new SshNetConnectionFactory(new InMemoryKnownHostStore()).ConnectAsync(request, Token));
+            await new SshNetConnectionFactory(new InMemoryKnownHostStore())
+                .ConnectAsync(request, progress: null, Token));

        failure.ShouldNotBeOfType<SshHostKeyUnknownException>();
        failure.ShouldNotBeOfType<SshHostKeyMismatchException>();
@@ -137,7 +138,7 @@ public sealed class LoopbackProxyTests(SshServerFixture fixture)
        var knownHosts = await TrustedStoreAsync();

        await using var connection = await new SshNetConnectionFactory(knownHosts)
-            .ConnectAsync(Request(Credential(), proxy: null), Token);
+            .ConnectAsync(Request(Credential(), proxy: null), progress: null, Token);

        connection.IsConnected.ShouldBeTrue();
    }
@@ -216,7 +217,7 @@ public sealed class LoopbackProxyTests(SshServerFixture fixture)

        var unknown = await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
            await new SshNetConnectionFactory(knownHosts)
-                .ConnectAsync(Request(Credential(), proxy: null), Token));
+                .ConnectAsync(Request(Credential(), proxy: null), progress: null, Token));

        await knownHosts.TrustAsync(unknown.Presentation, Token);

@@ -27,11 +27,11 @@ public sealed class PumpOverRealSshTests(SshServerFixture fixture)
            new SshPasswordCredential(SshServerFixture.Password));

        var unknown = await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
-            await factory.ConnectAsync(request, TestContext.Current.CancellationToken));
+            await factory.ConnectAsync(request, progress: null, TestContext.Current.CancellationToken));

        await knownHosts.TrustAsync(unknown.Presentation, TestContext.Current.CancellationToken);

-        return await factory.ConnectAsync(request, TestContext.Current.CancellationToken);
+        return await factory.ConnectAsync(request, progress: null, TestContext.Current.CancellationToken);
    }

    [Fact]
@@ -58,6 +58,58 @@ public sealed class RemotePathTests
        SftpPath.Trail("/").ShouldBeEmpty();
    }

+    /// <remarks>
+    /// The four shapes the file browser's path box has to take, because they are the four a shell takes and
+    /// somebody typing a path into a box is typing what they would type into a shell.
+    /// </remarks>
+    [Theory]
+    [InlineData("/var/log", "/etc/nginx", "/etc/nginx")]
+    [InlineData("/var/log", "nginx", "/var/log/nginx")]
+    [InlineData("/var/log", "../lib", "/var/lib")]
+    [InlineData("/var/log", "./nginx/", "/var/log/nginx")]
+    public void Resolve_TakesAbsoluteRelativeAndDotted(string current, string typed, string expected)
+    {
+        SftpPath.Resolve(current, typed).ShouldBe(expected);
+    }
+
+    [Theory]
+    [InlineData("~", "/home/dodo")]
+    [InlineData("~/.ssh", "/home/dodo/.ssh")]
+    public void Resolve_ExpandsHomeWhenTheSessionHasSaidWhatItIs(string typed, string expected)
+    {
+        SftpPath.Resolve("/var/log", typed, "/home/dodo").ShouldBe(expected);
+    }
+
+    /// <remarks>
+    /// A directory really can be called <c>~</c>, and a session that has not said where home is has nothing
+    /// to expand it to. Guessing would send somebody to a path nobody typed.
+    /// </remarks>
+    [Fact]
+    public void Resolve_LeavesHomeAloneWhenNothingHasSaidWhereItIs()
+    {
+        SftpPath.Resolve("/var/log", "~/keys").ShouldBe("/var/log/~/keys");
+    }
+
+    /// <remarks>
+    /// A blank box is not a request to go to the root, which is where "resolve nothing against the current
+    /// directory" would otherwise land somebody who cleared the box and pressed Enter.
+    /// </remarks>
+    [Fact]
+    public void Resolve_AnswersTheCurrentDirectoryForNothingTyped()
+    {
+        SftpPath.Resolve("/var/log", "   ").ShouldBe("/var/log");
+    }
+
+    /// <remarks>
+    /// Above the root is the root, as it is in every shell. The alternative is a path with no leading
+    /// separator, which is not a remote path at all.
+    /// </remarks>
+    [Fact]
+    public void Resolve_StopsClimbingAtTheRoot()
+    {
+        SftpPath.Resolve("/var", "../../../..").ShouldBe("/");
+    }
+
    [Fact]
    public void PosixMode_RendersTheKindCharacterAndThreeTriples()
    {
@@ -1,4 +1,6 @@
+using System.Net.Sockets;
 using System.Security.Cryptography;
+using System.Text;
 using DotNet.Testcontainers.Builders;
 using DotNet.Testcontainers.Containers;
 using Xunit;
@@ -40,6 +42,21 @@ public sealed class SshServerFixture : IAsyncLifetime

    private const int SshPort = 2222;

+    /// <summary>
+    /// How many connections in a row the server has to answer before this fixture calls it ready.
+    /// </summary>
+    /// <remarks>
+    /// Twenty-five, and the number is measured rather than picked. Probing a fresh container 200 times with
+    /// penalties left at the image's default, the first <c>Not allowed at this time</c> came back at probe
+    /// 18 and 183 of the 200 were refused; with <c>PerSourcePenalties no</c> applied, none of 200 were. Ten
+    /// was tried first and is useless — it sits below the threshold, so the guard passed happily against a
+    /// server that was still penalising. See <see cref="WaitUntilServingAsync"/>.
+    /// </remarks>
+    private const int RequiredStreak = 25;
+
+    /// <summary>How long to keep trying before giving up on the server entirely.</summary>
+    private static readonly TimeSpan ReadyTimeout = TimeSpan.FromSeconds(60);
+
    private readonly SemaphoreSlim sftpGate = new(1, 1);

    private IContainer? container;
@@ -80,52 +97,202 @@ public sealed class SshServerFixture : IAsyncLifetime
            .Build();

        await container.StartAsync();
-        await AllowTcpForwardingAsync();
+        await ReconfigureAsync();
+        await WaitUntilServingAsync();
    }

    /// <summary>
-    /// Lets this server open the direct-tcpip channels a forward is made of.
+    /// Turns off the hardening this suite trips over, and makes the running server re-read its config.
    /// </summary>
    /// <remarks>
    /// <para>
-    /// ◆ <b>The image ships <c>AllowTcpForwarding no</c>, and nothing says so at the point it bites.</b> A
-    /// dynamic forward starts perfectly happily — it is a local listener, and opening it asks the server
-    /// nothing — and then every connection through it is refused when the channel is opened. SSH.NET
-    /// reports that as <c>SOCKS5: General failure</c> from the proxy, which names neither the server nor
-    /// the setting, and is what the first run of <c>LoopbackProxyTests</c> collected.
+    /// ◆ <b><c>PerSourcePenalties no</c> is the fix for the flake this suite had for months, and the other
+    /// two settings here are not.</b> OpenSSH 9.8 added per-source penalties and 10.x has them on by
+    /// default; this image runs 10.3. A source address that keeps disconnecting without authenticating is
+    /// penalised, and while the penalty holds every connection from it is answered with the clear-text line
+    /// <c>Not allowed at this time</c> and then closed.
    /// </para>
    /// <para>
-    /// Patched after start rather than baked in, because the image's entrypoint writes its configuration
-    /// itself on every boot — a mounted file would be overwritten before sshd read it. sshd re-reads on
-    /// <c>SIGHUP</c> and applies the result to connections made after that, and the readiness wait has
-    /// already run, so nothing here races the boot.
+    /// <b>This suite generates exactly that traffic, by design.</b> This client's first contact with an
+    /// unknown host is a connection deliberately refused at the host key — which is a disconnect with no
+    /// authentication attempt — and several tests do nothing else:
+    /// <c>RefusingTheHostKey_AbortsTheConnection</c>, <c>AnUntrustedHost_IsRefusedExactlyAsAShellWouldBe</c>,
+    /// and every helper that learns a host key by being turned away first. Enough of them close together and
+    /// sshd stops talking to the test host altogether, for a while, and then starts again.
+    /// </para>
+    /// <para>
+    /// From the client that is <c>SshConnectionException: The connection was closed by the remote host</c>
+    /// within milliseconds — no banner, nothing to say which of the many reasons it was. It hits whichever
+    /// class is running when the penalty lands and spares the rest, which is why it read as random and why
+    /// the class it hit lost <em>every</em> connection it made rather than a random few. The one test in that
+    /// class that expects a refusal passed throughout, for the wrong reason.
+    /// </para>
+    /// <para>
+    /// ◆ <b>Two earlier diagnoses were wrong, and are recorded here so they are not tried again.</b>
+    /// <c>MaxStartups</c> was blamed on the reasoning that xUnit runs test classes in parallel, so ten
+    /// unauthenticated connections would be in flight at once — but every class that touches this server
+    /// shares <see cref="SshCollection"/>, and xUnit's unit of parallelism is the collection, so they run one
+    /// after another and never have more than a connection or two open. The reload window was blamed next,
+    /// and a wait for the banner to answer was written and removed as unproven; it was unproven because the
+    /// banner does answer, right up until the penalty lands.
+    /// </para>
+    /// <para>
+    /// The line is appended rather than replaced in place, unlike the two below it, because the image's
+    /// config does not mention the keyword at all — there is no line to replace, and sshd takes the first
+    /// value it finds for a keyword that appears more than once.
+    /// </para>
+    /// <para>
+    /// ◆ <b><c>AllowTcpForwarding</c> is what a dynamic forward needs</b>, and the image ships it off as
+    /// hardening. Without it a forward opens perfectly happily — a local listener asks the server nothing —
+    /// and then every connection through it is refused when the channel is opened. SSH.NET reports that as
+    /// <c>SOCKS5: General failure</c>, which names neither the server nor the setting, and is what the first
+    /// run of <c>LoopbackProxyTests</c> collected. That suite is also the alarm if this method ever silently
+    /// stops working.
+    /// </para>
+    /// <para>
+    /// <c>MaxStartups</c> is raised for the reason it should have been in the first place rather than as a
+    /// fix for anything: the compiled-in default refuses connections at random past ten unauthenticated ones
+    /// in flight, and a throttle is hardening a test server has no business reproducing. It is kept, not
+    /// because it was ever shown to matter here, but because removing it would be a second change riding
+    /// along with this one.
+    /// </para>
+    /// <para>
+    /// Both are replaced in place rather than appended, because sshd_config takes the <em>first</em> value
+    /// it finds for a keyword: an appended line would be dead the day the image ships an uncommented one of
+    /// its own.
    /// </para>
    /// <para>
    /// ◆ <b><c>/config/sshd/sshd_config</c>, and there are two.</b> The image also carries
-    /// <c>/etc/ssh/sshd_config</c>, which looks like the file to patch, reads identically, and is not the
-    /// one the running server was started with — patching it changes the text and nothing else, which is a
-    /// fix that appears to work and leaves the failure exactly where it was. Measured with <c>find</c>
-    /// rather than assumed, after the first version of this method did precisely that.
+    /// <c>/etc/ssh/sshd_config</c>, which looks like the file to patch, reads identically, and is not the one
+    /// the running server was started with — patching it changes the text and nothing else, which is a fix
+    /// that appears to work and leaves the failure exactly where it was.
    /// </para>
    /// <para>
-    /// It is on for the whole assembly rather than for the one test that needs it. Forwarding is off in
-    /// this image as hardening, not as a behaviour worth reproducing: nothing else here opens a channel of
-    /// any kind, so allowing it changes what exactly one suite can do and what none of the others see.
+    /// ◆ <b>Patched after boot and reloaded, rather than injected before it — which was tried and does not
+    /// work.</b> This image family runs <c>/custom-cont-init.d</c> scripts, which look like the right hook
+    /// and are not: the container's own log puts <c>sshd is listening on port 2222</c> <em>before</em>
+    /// <c>[custom-init] Files found, executing</c>, so a script there edits a file the running server has
+    /// already read. It leaves a config that greps correctly and a server behaving as though it had never
+    /// been touched — the same trap as the wrong file, one layer up. Measured from the log, after a version
+    /// of this fixture did exactly that and failed twenty-eight tests.
    /// </para>
    /// </remarks>
-    private async Task AllowTcpForwardingAsync()
+    private async Task ReconfigureAsync()
    {
        var result = await container!.ExecAsync([
            "sh",
            "-c",
            "sed -i 's/^AllowTcpForwarding no/AllowTcpForwarding yes/' /config/sshd/sshd_config"
+                + " && sed -i 's/^#*MaxStartups .*/MaxStartups 200/' /config/sshd/sshd_config"
+                + " && printf '\\nPerSourcePenalties no\\n' >> /config/sshd/sshd_config"
                + " && pkill -HUP sshd",
        ]);

        if (result.ExitCode != 0)
        {
            throw new InvalidOperationException(
-                $"Could not enable TCP forwarding on the test server: {result.Stderr}");
+                $"Could not reconfigure the test server: {result.Stderr}");
+        }
+    }
+
+    /// <summary>
+    /// Blocks until the server answers <see cref="RequiredStreak"/> connections in a row with its banner.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// ◆ <b>This is a guard rather than a wait, and what it guards against is
+    /// <c>PerSourcePenalties</c> coming back.</b> Reconfiguring above turns it off; this proves it is off,
+    /// immediately and by name, instead of letting the suite discover it later as an unrelated-looking
+    /// failure in whichever class happened to be running.
+    /// </para>
+    /// <para>
+    /// <b>Consecutive, and deliberately with no pause between them.</b> Each probe opens a connection, reads
+    /// the identification string and disconnects without authenticating — which is exactly the shape of
+    /// connection <c>PerSourcePenalties</c> punishes, and exactly what this suite does all day: a first
+    /// contact with an unknown host is a connection this client deliberately refuses at the host key.
+    /// <see cref="RequiredStreak"/> back to back is therefore not a soak test, it is the specific
+    /// provocation, sized above the measured threshold on purpose, and it costs well under a second when the
+    /// setting is off.
+    /// </para>
+    /// <para>
+    /// It is also the one check that can tell a listening socket from a running server. The container's own
+    /// readiness — a log line and <c>netstat</c> showing <c>:2222</c> — passes on a container whose sshd has
+    /// gone: the socket is published by a host-side proxy that accepts before it has anything to forward to,
+    /// so a dead server presents as a connection accepted and closed rather than as one refused.
+    /// </para>
+    /// <para>
+    /// Probed from the host rather than with <c>docker exec</c>, deliberately: that is the path the tests
+    /// take, proxy included, and penalties are counted per source address — from inside the container the
+    /// source would be the loopback rather than the address every test connects from.
+    /// </para>
+    /// </remarks>
+    private async Task WaitUntilServingAsync()
+    {
+        // TimeProvider.System rather than DateTimeOffset.UtcNow, which this repository bans so that time can
+        // be faked — and rather than a fake, because what is being waited on is a real container starting.
+        var deadline = TimeProvider.System.GetUtcNow() + ReadyTimeout;
+        var streak = 0;
+        var last = "no probe ran";
+
+        while (streak < RequiredStreak)
+        {
+            if (TimeProvider.System.GetUtcNow() >= deadline)
+            {
+                throw new InvalidOperationException(
+                    $"The test server did not answer {RequiredStreak} connections in a row within "
+                    + $"{ReadyTimeout}. The last probe said: {last}. If it says \"Not allowed at this "
+                    + "time\", sshd is penalising this source address and PerSourcePenalties is no longer "
+                    + "being turned off — see ReconfigureAsync.");
+            }
+
+            var (answered, what) = await ProbeAsync();
+            last = what;
+
+            if (answered)
+            {
+                streak++;
+                continue;
+            }
+
+            // Only pause when it is not working. Back-to-back probes are the point while they succeed;
+            // hammering a server that has not finished starting is just noise.
+            streak = 0;
+            await Task.Delay(TimeSpan.FromMilliseconds(200));
+        }
+    }
+
+    /// <summary>Opens a socket and reads far enough to see OpenSSH's identification string.</summary>
+    /// <remarks>
+    /// The description comes back with the answer because the interesting failures are not exceptions. A
+    /// penalised source is told <c>Not allowed at this time</c> in clear text before the socket closes, and
+    /// a suite that only knew "no banner" would have to go and find that out again — which is what happened
+    /// the first time, at some length.
+    /// </remarks>
+    private async Task<(bool Answered, string What)> ProbeAsync()
+    {
+        try
+        {
+            using var probe = new TcpClient();
+            using var timeout = new CancellationTokenSource(TimeSpan.FromSeconds(5));
+
+            await probe.ConnectAsync(Host, Port, timeout.Token);
+
+            var buffer = new byte[64];
+            var read = await probe.GetStream().ReadAtLeastAsync(
+                buffer, 4, throwOnEndOfStream: false, timeout.Token);
+
+            var answered = read >= 4 && "SSH-"u8.SequenceEqual(buffer.AsSpan(0, 4));
+
+            return (
+                answered,
+                answered
+                    ? "SSH-"
+                    : $"{read} bytes: "
+                        + Encoding.ASCII.GetString(buffer, 0, Math.Max(read, 0)).ReplaceLineEndings(" "));
+        }
+        catch (Exception exception) when (exception is SocketException or OperationCanceledException or IOException)
+        {
+            return (false, $"{exception.GetType().Name}: {exception.Message}");
        }
    }

@@ -168,12 +335,17 @@ public sealed class SshServerFixture : IAsyncLifetime
    /// </summary>
    /// <remarks>
    /// <para>
-    /// Shared rather than opened per test, and that is a limit of the server rather than an optimisation.
-    /// sshd's <c>MaxStartups</c> drops connections at random once enough are part-way through a handshake,
-    /// and this client's first contact with an unknown host is a connection deliberately <em>refused</em> at
-    /// the host key — so a suite that opened its own session per test made two handshakes per test and
-    /// pushed the whole assembly over the threshold. What that looks like is unrelated tests failing with
-    /// "the connection was closed by the remote host", a different few each run.
+    /// Shared rather than opened per test. This was once explained as a way of staying under the server's
+    /// <c>MaxStartups</c> throttle, on the belief that the suite ran its classes in parallel and made two
+    /// handshakes per test — this client's first contact with an unknown host is a connection deliberately
+    /// <em>refused</em> at the host key, so every session costs two. The parallelism was not real: every
+    /// class here shares one collection and xUnit runs collections, not classes, in parallel. See
+    /// <see cref="WaitUntilServingAsync"/>, which is where that mistake was found and what the failure it
+    /// was blamed for turned out to be.
+    /// </para>
+    /// <para>
+    /// It stays shared regardless, on the plainer argument: one session is enough, and a handshake per test
+    /// would be seconds of the suite's runtime spent proving nothing this file has not already proved.
    /// </para>
    /// <para>
    /// Safe to share because an SFTP session holds no per-test state: every test here works in a directory
@@ -110,7 +110,7 @@ public sealed class TerminalEndToEndTests(SshServerFixture fixture)

        var unknown = await Should.ThrowAsync<SshHostKeyUnknownException>(async () =>
            await workspace.OpenSessionAsync(
-                request, TerminalSize.Default, TestContext.Current.CancellationToken));
+                request, TerminalSize.Default, progress: null, TestContext.Current.CancellationToken));

        unknown.Presentation.Fingerprint.ShouldStartWith(SshHostKeyFingerprint.Prefix);

@@ -119,6 +119,7 @@ public sealed class TerminalEndToEndTests(SshServerFixture fixture)
        return await workspace.OpenSessionAsync(
            request,
            new TerminalSize(100, 30, 1000, 750),
+            progress: null,
            TestContext.Current.CancellationToken);
    }

@@ -41,11 +41,11 @@
      },
      "SSH.NET": {
        "type": "Direct",
-        "requested": "[2025.1.0, )",
-        "resolved": "2025.1.0",
-        "contentHash": "jrnbtf0ItVaXAe6jE8X/kSLa6uC+0C+7W1vepcnRQB/rD88qy4IxG7Lf1FIbWmkoc4iVXv0pKrz+Wc6J4ngmHw==",
+        "requested": "[2026.0.0, )",
+        "resolved": "2026.0.0",
+        "contentHash": "Yu9dirPq8l3oaat0+OQ7K0nUf5MmYltpia5UGqsApTG4zTPvBC1cxbNnC3NERij26dUST0A3Ef1QdHSn5ArbWQ==",
        "dependencies": {
-          "BouncyCastle.Cryptography": "2.6.2",
+          "BouncyCastle.Cryptography": "2.7.0",
          "Microsoft.Extensions.Logging.Abstractions": "8.0.3"
        }
      },
@@ -306,7 +306,7 @@
        "type": "Project",
        "dependencies": {
          "NSec.Cryptography": "[26.4.0, )",
-          "SSH.NET": "[2025.1.0, )"
+          "SSH.NET": "[2026.0.0, )"
        }
      },
      "dodossh.client.terminal": {
@@ -317,9 +317,9 @@
      },
      "BouncyCastle.Cryptography": {
        "type": "CentralTransitive",
-        "requested": "[2.6.2, )",
-        "resolved": "2.6.2",
-        "contentHash": "7oWOcvnntmMKNzDLsdxAYqApt+AjpRpP2CShjMfIa3umZ42UQMvH0tl1qAliYPNYO6vTdcGMqnRrCPmsfzTI1w=="
+        "requested": "[2.7.0, )",
+        "resolved": "2.7.0",
+        "contentHash": "U+12df8UEWHgBi04YVf/Lgi2dy3SItlIYvHjjEVa/BngCQIzDCDRBk50DDByCfDvSbe5pRNFr3b7UrVK2kMcLw=="
      },
      "libsodium": {
        "type": "CentralTransitive",
@@ -4,10 +4,44 @@
    The throughput and backpressure harness the plan requires before any UI exists. Nothing
    here needs a WebView: the flow control is what is most likely to be wrong, and it is pure
    logic once ITerminalTransport is a seam.
+
+    And, since RendererReconnectionTests, the renderer's own half of the same protocol — the page
+    that reads these frames, run as a script rather than described in C#. It lives here rather than
+    in a test project of the shell's own because this is where the other end of the socket is
+    tested, and the two halves of "the renderer stays attached" are one mechanism: the host takes
+    a second upgrade over the first, and the page is what makes that second upgrade happen. A
+    project for the shell would still need a reference to this one's subject to say anything.
  -->

  <ItemGroup>
    <ProjectReference Include="../../src/DodoSSH.Client.Terminal/DodoSSH.Client.Terminal.csproj" />
  </ItemGroup>

+  <ItemGroup>
+    <!--
+      A JavaScript engine, so terminal.js can be run as it ships instead of transcribed into C#.
+      See RendererPage for the trade against a node script, and for what an engine that is not
+      Chromium can and cannot prove.
+    -->
+    <PackageReference Include="Jint" />
+  </ItemGroup>
+
+  <ItemGroup>
+    <!--
+      ◆ THE PAGE IS COPIED OUT OF THE SHELL PROJECT, WHICH IS THE ONE ODD THING IN THIS FILE.
+
+      Reaching across for a source file is not something else here does, and the alternatives are
+      worse: referencing DodoSSH.Client.Shell would drag Avalonia into a suite that draws nothing,
+      and a copy of the page checked in beside the tests would be a copy — the thing that quietly
+      stops matching what ships, which is precisely the failure this test exists to catch.
+
+      PreserveNewest rather than Always so that editing the page is what rebuilds it.
+    -->
+    <None Include="../../src/DodoSSH.Client.Shell/WebAssets/terminal.js"
+          Link="Renderer/terminal.js"
+          CopyToOutputDirectory="PreserveNewest" />
+
+    <None Include="Renderer/renderer-harness.js" CopyToOutputDirectory="PreserveNewest" />
+  </ItemGroup>
+
 </Project>
@@ -139,8 +139,15 @@ internal sealed class FakeConnectionFactory(long bytesPerShell = long.MaxValue,
    /// <inheritdoc />
    public Task<ISshConnection> ConnectAsync(
        SshConnectionRequest request,
+        IProgress<SshConnectionPhase>? progress,
        CancellationToken cancellationToken)
    {
+        // The real factory's own order, so that a test watching this fake is watching the same sequence a
+        // real handshake produces. It cannot report CheckingHostKey — there is no key exchange here to
+        // produce a key — and inventing one would make this the only place that phase came from.
+        progress?.Report(SshConnectionPhase.Reaching);
+        progress?.Report(SshConnectionPhase.Authenticating);
+
        var connection = new FakeConnection(request, bytesPerShell, blockShellReads);
        Connections.Add(connection);

@@ -250,3 +257,15 @@ internal sealed class RecordingTransport : ITerminalTransport
            TerminalFrame.TryRead(frame, out var actual, out _, out _)
            && actual == (byte)opcode);
 }
+
+/// <summary>An <see cref="IProgress{T}"/> that runs its callback on the thread that reported.</summary>
+/// <remarks>
+/// <c>System.Progress&lt;T&gt;</c> would post to a captured synchronisation context, or to the thread pool
+/// when there is none — which is what a test has here — so a list it appended to would be asserted on before
+/// it had been written. This is the same reason the shell does not use it either; see
+/// <c>VaultViewModel.ReporterFor</c>.
+/// </remarks>
+internal sealed class DelegateProgress<T>(Action<T> report) : IProgress<T>
+{
+    public void Report(T value) => report(value);
+}
@@ -0,0 +1,222 @@
+'use strict';
+
+/*
+  The world terminal.js is loaded into by RendererReconnectionTests.
+
+  It fakes exactly what the page's transport touches and nothing else: a WebSocket whose every step is
+  driven from the test, a clock that only moves when a test moves it, and the two DOM objects the page
+  reads at load. There is no Terminal, no fit addon and no WebGL here, because nothing on the reconnection
+  path builds a pane — a test that opens a session will have to add them, and should, rather than this
+  file guessing now at what such a test would want.
+
+  ◆ NOTHING HERE MAY DECLARE A NAME terminal.js ALSO DECLARES.
+
+  Both files are evaluated as scripts into the same global scope, and the page's own `const root` against
+  a `var root` here is a SyntaxError before a line of either runs. That is why the page's two elements are
+  `pageRoot` and `pageBanner` below and reached through getElementById, which is how the page reaches them
+  anyway.
+
+  ◆ AND THE FAKE SOCKET'S BEHAVIOUR IS THE PART TO GET RIGHT.
+
+  close() is the one method with a rule that is not obvious and that the tests lean on: a socket closed
+  while it is still CONNECTING never fires 'close' at all, per the WebSocket specification, while one
+  closed after it opened does. The page relies on exactly that — connect() closes the attempt it abandons
+  and expects to hear nothing back from it — so a fake that fired 'close' either way would report the loop
+  the page's guards exist to prevent, and one that fired it neither way would hide it.
+*/
+
+var clock = { now: 0, next: 1, timers: {} };
+
+/** Every socket the page has opened, in order, live or dead. */
+var sockets = [];
+
+function listeners(target) {
+  target.handlers = {};
+
+  target.addEventListener = function (name, handler) {
+    if (!target.handlers[name]) {
+      target.handlers[name] = [];
+    }
+
+    target.handlers[name].push(handler);
+  };
+
+  target.fire = function (name) {
+    var handlers = target.handlers[name] || [];
+
+    for (var i = 0; i < handlers.length; i++) {
+      handlers[i]({});
+    }
+  };
+
+  return target;
+}
+
+function FakeSocket(url, protocols) {
+  this.url = url;
+  this.protocols = protocols;
+  this.readyState = FakeSocket.CONNECTING;
+  this.binaryType = '';
+
+  listeners(this);
+  sockets.push(this);
+}
+
+FakeSocket.CONNECTING = 0;
+FakeSocket.OPEN = 1;
+FakeSocket.CLOSING = 2;
+FakeSocket.CLOSED = 3;
+
+FakeSocket.prototype.send = function () {};
+
+/** What the page calls. See the note above on why a connecting socket goes quietly. */
+FakeSocket.prototype.close = function () {
+  if (this.readyState === FakeSocket.CLOSED) {
+    return;
+  }
+
+  var wasConnecting = this.readyState === FakeSocket.CONNECTING;
+  this.readyState = FakeSocket.CLOSED;
+
+  if (!wasConnecting) {
+    this.fire('close');
+  }
+};
+
+var pageBanner = { textContent: 'Connecting…' };
+
+var pageRoot = listeners({
+  dataset: { token: 'test-token', socket: 'ws://127.0.0.1:1/socket' },
+  appendChild: function () {},
+});
+
+var document = listeners({
+  hidden: false,
+  getElementById: function (id) { return id === 'root' ? pageRoot : pageBanner; },
+  createElement: function () { return { dataset: {}, style: {}, remove: function () {} }; },
+});
+
+var window = listeners({});
+
+// The page warns through this on paths no reconnection test reaches. Present so that a test which does
+// reach one fails on its own assertion rather than on a missing global.
+var console = { warn: function () {}, log: function () {} };
+
+function setTimeout(callback, delay) {
+  var id = clock.next++;
+
+  clock.timers[id] = { at: clock.now + (delay || 0), callback: callback };
+
+  return id;
+}
+
+function clearTimeout(id) {
+  delete clock.timers[id];
+}
+
+function ResizeObserver() {
+  this.observe = function () {};
+}
+
+// ── What the tests drive the page with ──────────────────────────────────────────────────────────────
+
+/**
+ * Runs every timer due within the next `ms`, in the order they fall due.
+ *
+ * One at a time and re-scanned each round rather than collected up front, because a timer's callback
+ * routinely schedules the next one — which is the whole shape of the page's retry — and a snapshot taken
+ * before the first callback ran would miss it.
+ */
+function advance(ms) {
+  var target = clock.now + ms;
+
+  for (;;) {
+    var dueId = null;
+    var due = null;
+
+    for (var id in clock.timers) {
+      var timer = clock.timers[id];
+
+      if (timer.at <= target && (due === null || timer.at < due.at)) {
+        due = timer;
+        dueId = id;
+      }
+    }
+
+    if (due === null) {
+      break;
+    }
+
+    delete clock.timers[dueId];
+    clock.now = due.at;
+    due.callback();
+  }
+
+  clock.now = target;
+}
+
+/** How many sockets the page has opened since it loaded. */
+function attempts() {
+  return sockets.length;
+}
+
+/** What the one status element says — the banner the user sees. */
+function banner() {
+  return pageBanner.textContent;
+}
+
+/** Whether that attempt has been closed, by the page or by the far end. */
+function isClosed(index) {
+  return sockets[index].readyState === FakeSocket.CLOSED;
+}
+
+/** The host accepted the upgrade. */
+function accept(index) {
+  sockets[index].readyState = FakeSocket.OPEN;
+  sockets[index].fire('open');
+}
+
+/** An established socket goes away and the page is told. */
+function drop(index) {
+  sockets[index].readyState = FakeSocket.CLOSED;
+  sockets[index].fire('close');
+}
+
+/** An attempt that never connects: 'error' then 'close', as a refused connection reports itself. */
+function fail(index) {
+  sockets[index].readyState = FakeSocket.CLOSED;
+  sockets[index].fire('error');
+  sockets[index].fire('close');
+}
+
+/**
+ * A close arriving for a socket that died earlier — the host's takeover abort, landing late.
+ *
+ * Separate from drop() because the point of it is the delay: the socket is already dead by the time the
+ * event is delivered, which is what a suspended renderer's queued events look like on the way back.
+ */
+function deliverLateClose(index) {
+  sockets[index].readyState = FakeSocket.CLOSED;
+  sockets[index].fire('close');
+}
+
+/** The screen the page is on goes away, and comes back. */
+function becomeHidden() {
+  document.hidden = true;
+  document.fire('visibilitychange');
+}
+
+function becomeVisible() {
+  document.hidden = false;
+  document.fire('visibilitychange');
+}
+
+function takeFocus() {
+  window.fire('focus');
+}
+
+function comeOnline() {
+  window.fire('online');
+}
+
+var WebSocket = FakeSocket;
@@ -0,0 +1,79 @@
+using System.Globalization;
+
+using Jint;
+
+namespace DodoSSH.Client.Terminal.Tests;
+
+/// <summary>
+/// One load of <c>terminal.js</c>, in a fake browser, for one test.
+/// </summary>
+/// <remarks>
+/// <para>
+/// <b>The page's own source is what runs.</b> Not a transcription of its logic into C# — that would test a
+/// copy, and the copy would be the thing that stayed correct. The file is read from the shell project and
+/// evaluated as it ships, so a change to the page that breaks the reconnection rules fails here.
+/// </para>
+/// <para>
+/// <b>Jint rather than node, and that is a deliberate trade.</b> A node script would be the obvious way to
+/// run JavaScript and would need node on every machine and in every CI job that runs the suite — so it
+/// would be a second test command, run separately, and the first thing to be forgotten. This runs inside
+/// <c>dotnet test</c> with everything else. What it costs is that the engine is not the engine the page
+/// actually runs in: Jint is not Chromium, so this can prove the page's own logic and can prove nothing
+/// about how WebView2 or Android's WebView behave. That boundary is exactly where
+/// <c>docs/manual-checks.md</c> picks up — see 1.10 and 11.12a.
+/// </para>
+/// <para>
+/// A fresh engine per test, because the page is a script with module-level state and there is no unloading
+/// it: two tests sharing one engine would share a socket list, a clock and a backoff.
+/// </para>
+/// </remarks>
+internal sealed class RendererPage
+{
+    private readonly Engine engine;
+
+    private RendererPage(Engine engine) => this.engine = engine;
+
+    /// <summary>How many sockets the page has opened since it loaded.</summary>
+    /// <remarks>
+    /// The measurement nearly every test here turns on, and it is deliberately a count of *attempts*
+    /// rather than of live sockets: the failures being guarded against are a page that stops trying and a
+    /// page that never stops, and both are counted rather than observed.
+    /// </remarks>
+    public int Attempts => (int)engine.Evaluate("attempts()").AsNumber();
+
+    /// <summary>What the status element says — the banner a user would be looking at.</summary>
+    public string Banner => engine.Evaluate("banner()").AsString();
+
+    /// <summary>
+    /// Loads the harness and then the page, leaving the page exactly as it is a moment after the WebView
+    /// navigated to it: one socket opened and still connecting.
+    /// </summary>
+    public static RendererPage Load()
+    {
+        var browser = new Engine();
+
+        // Order matters and is not incidental: the page connects on its last line, so every global it
+        // touches — the socket constructor above all — has to be in place before it is evaluated.
+        browser.Execute(Read("Renderer/renderer-harness.js"));
+        browser.Execute(Read("Renderer/terminal.js"));
+
+        return new RendererPage(browser);
+    }
+
+    /// <summary>Runs a line of the harness's own vocabulary — <c>accept(0)</c>, <c>advance(1000)</c>.</summary>
+    public void Do(string script) => engine.Execute(script);
+
+    /// <summary>Whether that attempt has been closed, by the page or by the far end.</summary>
+    public bool IsClosed(int attempt) =>
+        engine.Evaluate(
+                string.Create(CultureInfo.InvariantCulture, $"isClosed({attempt})"))
+            .AsBoolean();
+
+    /// <remarks>
+    /// Both files are copied beside the test assembly by the project file, the page out of the shell
+    /// project it belongs to. Read from disk rather than embedded so that the copy which runs here is the
+    /// same bytes the host serves, with nothing in between that could go stale.
+    /// </remarks>
+    private static string Read(string relativePath) =>
+        File.ReadAllText(Path.Combine(AppContext.BaseDirectory, relativePath));
+}
@@ -0,0 +1,192 @@
+namespace DodoSSH.Client.Terminal.Tests;
+
+/// <summary>
+/// The renderer page's half of staying attached — <c>terminal.js</c>'s <c>connect()</c> and what drives it.
+/// </summary>
+/// <remarks>
+/// <para>
+/// The host's half is <see cref="TerminalDataPlaneTests"/>, and the two are one mechanism: a socket that
+/// drops is ordinary here, and the page coming back for another is what makes it ordinary. What these
+/// tests protect is the property that failure of this mechanism has no other symptom — a terminal whose
+/// page has given up looks exactly like a terminal whose remote has gone quiet, except for a line of text
+/// nobody reads twice.
+/// </para>
+/// <para>
+/// Four of these were written against a page that failed them — the stale close, the handshake that never
+/// finishes, and the two wake-ups — and the rest describe behaviour that was already right and is easy to
+/// break while fixing those. The two that assert a wake-up does *nothing* pass against either version,
+/// which is the point of them: they are what stops the cure being worse, and they can only ever fail
+/// against a future change. See <see cref="RendererPage"/> for how the real file is loaded and for what
+/// this cannot reach.
+/// </para>
+/// </remarks>
+public sealed class RendererReconnectionTests
+{
+    [Fact]
+    public void ThePage_ConnectsWhenItLoads()
+    {
+        var page = RendererPage.Load();
+
+        page.Attempts.ShouldBe(1);
+    }
+
+    [Fact]
+    public void ADroppedSocket_IsRetriedAndTheBannerClears()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("accept(0)");
+        page.Banner.ShouldBe("");
+
+        page.Do("drop(0)");
+        page.Banner.ShouldStartWith("Reconnecting");
+
+        page.Do("advance(1000)");
+        page.Attempts.ShouldBe(2);
+
+        page.Do("accept(1)");
+        page.Banner.ShouldBe("");
+    }
+
+    /// <remarks>
+    /// The wait grows within one outage and goes back to a second once a socket has actually opened, so
+    /// that the next outage is not paid for at the previous one's rate.
+    /// </remarks>
+    [Fact]
+    public void TheWait_GrowsWithinAnOutageAndResetsAfterIt()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("fail(0); advance(1000)");
+        page.Attempts.ShouldBe(2);
+
+        page.Do("fail(1); advance(1999)");
+        page.Attempts.ShouldBe(2);
+
+        page.Do("advance(1)");
+        page.Attempts.ShouldBe(3);
+
+        page.Do("accept(2); drop(2); advance(1000)");
+        page.Attempts.ShouldBe(4);
+    }
+
+    /// <summary>
+    /// A close for a socket the page has already replaced must not start a reconnect.
+    /// </summary>
+    /// <remarks>
+    /// The loop this forbids costs nothing to enter and never leaves: the host aborts the displaced socket
+    /// on every takeover — see <c>TerminalDataPlane.UpgradeAsync</c> — so a stale close that schedules a
+    /// retry displaces the socket that has just succeeded, whose own close schedules the next. The visible
+    /// end of it is a terminal that reconnects every second forever with the banner up for most of it.
+    /// </remarks>
+    [Fact]
+    public void AStaleClose_DoesNotDisplaceTheSocketThatSucceeded()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("accept(0); drop(0); advance(1000)");
+        page.Do("accept(1)");
+        page.Attempts.ShouldBe(2);
+
+        // The first socket's end, arriving after the page has moved on.
+        page.Do("deliverLateClose(0)");
+        page.Do("advance(60000)");
+
+        page.Attempts.ShouldBe(2);
+        page.Banner.ShouldBe("");
+    }
+
+    /// <summary>
+    /// An attempt that never finishes its handshake is given up on rather than waited on forever.
+    /// </summary>
+    /// <remarks>
+    /// Every other retry in the page is scheduled by a close or an error, so a socket that reports neither
+    /// — which is what a renderer suspended mid-handshake leaves behind — used to schedule nothing at all.
+    /// The page then held a banner saying it was reconnecting with no timer pending and no socket coming,
+    /// for the rest of its life.
+    /// </remarks>
+    [Fact]
+    public void AHandshakeThatNeverFinishes_IsAbandonedAndRetried()
+    {
+        var page = RendererPage.Load();
+
+        // Nothing whatever from the first attempt: no open, no error, no close.
+        page.Do("advance(5000)");
+        page.Attempts.ShouldBe(1);
+
+        page.Do("advance(1000)");
+        page.Attempts.ShouldBe(2);
+        page.IsClosed(0).ShouldBeTrue();
+
+        page.Do("accept(1)");
+        page.Banner.ShouldBe("");
+    }
+
+    /// <summary>
+    /// Coming back to the page reconnects it, without waiting for a timer that may not be running.
+    /// </summary>
+    /// <remarks>
+    /// The case the whole wake-up path exists for, and the one a test can only approximate: the harness's
+    /// clock stands still here because a real hidden page's clock is throttled rather than stopped, and
+    /// standing still is the honest worst case of that. What is being asserted is that the page does not
+    /// need the clock at all to notice it is back.
+    /// </remarks>
+    [Fact]
+    public void BecomingVisibleAgain_ReconnectsWithoutTheTimer()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("accept(0); becomeHidden(); drop(0)");
+        page.Attempts.ShouldBe(1);
+
+        page.Do("becomeVisible()");
+        page.Attempts.ShouldBe(2);
+
+        // And the timer that was pending when the page woke must not open a third socket on top of the
+        // one that just succeeded — which would be the takeover loop, entered from the other side.
+        page.Do("accept(1); advance(60000)");
+        page.Attempts.ShouldBe(2);
+        page.Banner.ShouldBe("");
+    }
+
+    [Fact]
+    public void TakingTheKeyboardBack_AlsoReconnects()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("accept(0); drop(0); takeFocus()");
+
+        page.Attempts.ShouldBe(2);
+    }
+
+    /// <remarks>
+    /// The wake-ups fire on gestures as ordinary as clicking the window, so the check they make has to be
+    /// the thing that keeps them cheap rather than the frequency. A page whose socket is up must treat all
+    /// of them as nothing at all — anything else would be the takeover loop with a person's mouse driving it.
+    /// </remarks>
+    [Fact]
+    public void WakingUpOverAHealthySocket_DoesNothing()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("accept(0)");
+        page.Do("takeFocus(); becomeVisible(); comeOnline(); becomeHidden(); becomeVisible()");
+
+        page.Attempts.ShouldBe(1);
+        page.Banner.ShouldBe("");
+    }
+
+    /// <remarks>
+    /// An attempt already in flight is left to finish or to time out. Restarting it on every wake-up would
+    /// mean a page being clicked during a slow handshake never completing one.
+    /// </remarks>
+    [Fact]
+    public void WakingUpWhileConnecting_LeavesTheAttemptAlone()
+    {
+        var page = RendererPage.Load();
+
+        page.Do("takeFocus(); becomeVisible(); comeOnline()");
+
+        page.Attempts.ShouldBe(1);
+    }
+}
@@ -416,6 +416,36 @@ public sealed class TerminalDataPlaneTests : IAsyncDisposable
            TimeProvider.System,
            new TerminalPumpOptions { FlushInterval = TimeSpan.FromMilliseconds(10) });

+    /// <summary>
+    /// Opens a renderer's socket and returns once the plane is actually holding it.
+    /// </summary>
+    /// <remarks>
+    /// <para>
+    /// <b>Connected and attached are two different moments, and the gap between them is where this used to
+    /// flake.</b> <c>ClientWebSocket.ConnectAsync</c> completes on the 101, which
+    /// <see cref="TerminalDataPlane.UpgradeAsync"/> writes before it has a <see cref="WebSocket"/> to
+    /// attach — it builds one from the stream and swaps it in a few instructions later, on the accept
+    /// thread. A frame sent in between is dropped, by design rather than by accident: the transport has
+    /// nowhere to put a frame for a renderer that is not there, and queueing it is the unbounded growth the
+    /// credit window exists to prevent.
+    /// </para>
+    /// <para>
+    /// So a test that connected and immediately expected a frame was racing that window on every run. It
+    /// lost one on CI — <c>Output_ReachesTheRenderer</c> read the output frame first and asked why it was
+    /// not the session's opening one, the opening one having been dropped a moment earlier — which is a
+    /// scheduling accident on a loaded machine and says nothing whatever about the transport.
+    /// </para>
+    /// <para>
+    /// Production does not race it and needs no change: everything that opens a session waits on
+    /// <c>TerminalWorkspace.WaitForRendererAsync</c> first, and that resolves from the same few lines this
+    /// event is raised from.
+    /// </para>
+    /// <para>
+    /// Subscribed before the connection rather than after it, because the event is raised on the accept
+    /// thread and can be over before <c>ConnectAsync</c> has returned here. Bounded, so that a socket that
+    /// never attaches fails this helper rather than hanging the suite in a later receive.
+    /// </para>
+    /// </remarks>
    private async Task<ClientWebSocket> ConnectAsync(
        string? token = "",
        string? origin = null)
@@ -433,17 +463,31 @@ public sealed class TerminalDataPlaneTests : IAsyncDisposable
            "Origin",
            origin ?? string.Create(CultureInfo.InvariantCulture, $"http://127.0.0.1:{plane.Port}"));

+        var attached = new TaskCompletionSource(TaskCreationOptions.RunContinuationsAsynchronously);
+
+        void OnAttached(object? sender, EventArgs e) => attached.TrySetResult();
+
+        plane.SocketAttached += OnAttached;
+
        try
        {
            await socket.ConnectAsync(
                new Uri($"ws://127.0.0.1:{plane.Port}{TerminalDataPlane.SocketPath}"),
                TestContext.Current.CancellationToken);
+
+            await attached.Task.WaitAsync(
+                TimeSpan.FromSeconds(5),
+                TestContext.Current.CancellationToken);
        }
        catch
        {
            socket.Dispose();
            throw;
        }
+        finally
+        {
+            plane.SocketAttached -= OnAttached;
+        }

        return socket;
    }
@@ -72,12 +72,12 @@ public sealed class TerminalWorkspaceTests
        workspace.LiveSessionCount.ShouldBe(0);

        await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        workspace.LiveSessionCount.ShouldBe(1);

        await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        workspace.LiveSessionCount.ShouldBe(2);
    }
@@ -98,11 +98,63 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await WaitUntilAsync(() => workspace.LiveSessionCount == 0);
    }

+    /// <remarks>
+    /// <para>
+    /// <see cref="SshConnectionPhase.OpeningShell"/> is the one phase no connection factory can report,
+    /// because by the time it happens the factory has handed back a connection and gone. If this layer did
+    /// not report it the card's last step would light only when the whole session opened, which is the one
+    /// moment the card is already being taken down — a step nobody would ever see lit.
+    /// </para>
+    /// <para>
+    /// Asserted as the whole sequence rather than as "contains OpeningShell", because the order is the part
+    /// that matters: a step list is only readable if what it is told arrives in the order it draws.
+    /// </para>
+    /// </remarks>
+    [Fact]
+    public async Task OpeningASession_ReportsTheShellPhaseTheFactoryCannot()
+    {
+        var connections = new FakeConnectionFactory();
+        var reported = new List<SshConnectionPhase>();
+
+        await using var workspace = CreateWorkspace(connections);
+
+        await workspace.OpenSessionAsync(
+            Request(),
+            TerminalSize.Default,
+            new DelegateProgress<SshConnectionPhase>(reported.Add),
+            TestContext.Current.CancellationToken);
+
+        reported.ShouldBe(
+        [
+            SshConnectionPhase.Reaching,
+            SshConnectionPhase.Authenticating,
+            SshConnectionPhase.OpeningShell,
+        ],
+        "the factory's own phases, then the one this layer performs itself");
+    }
+
+    /// <remarks>
+    /// Nobody watching is the ordinary case — every caller but the connecting card passes null — so it is
+    /// worth one test that the null is a null and not a null reference.
+    /// </remarks>
+    [Fact]
+    public async Task OpeningASession_WorksWithNobodyWatchingItsPhases()
+    {
+        var connections = new FakeConnectionFactory();
+
+        await using var workspace = CreateWorkspace(connections);
+
+        var sessionId = await workspace.OpenSessionAsync(
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);
+
+        workspace.IsSessionLive(sessionId).ShouldBeTrue();
+    }
+
    [Fact]
    public async Task ClosingASessionEndsItAndDisposesItsConnection()
    {
@@ -111,7 +163,7 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await workspace.CloseSessionAsync(sessionId);

@@ -138,9 +190,9 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var first = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);
        var second = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        workspace.IsSessionLive(first).ShouldBeTrue();
        workspace.IsSessionLive(second).ShouldBeTrue();
@@ -166,7 +218,7 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        var facts = workspace.GetSessionFacts(sessionId).ShouldNotBeNull();
        var connection = connections.Connections.ShouldHaveSingleItem();
@@ -199,7 +251,7 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        (await workspace.PasteAsync(
            sessionId, "uptime", execute: false, TestContext.Current.CancellationToken))
@@ -217,12 +269,15 @@ public sealed class TerminalWorkspaceTests
    }

    /// <remarks>
-    /// The event the tab strip listens to, so a dot can go out the moment a shell exits rather than at the
-    /// next thing that happens to repaint. Raised only when the session ended on its own: a tab the user
-    /// closed has a caller who already knows, and telling it would turn one close into two.
+    /// The event the tab strip and the phone's keep-alive listen to, so a dot can go out — and a foreground
+    /// notification can come down — the moment a shell exits rather than at the next thing that happens to
+    /// repaint. The count captured inside the handler is the sharper half of this test: the announcement
+    /// used to fire from inside the run's own finally block, where the run task is not yet complete, so
+    /// <c>LiveSessionCount</c> read from the handler still said 1 — and the phone's notification went on
+    /// claiming a shell that was gone, with nothing left to fire and correct it.
    /// </remarks>
    [Fact]
-    public async Task ASessionEndingOnItsOwnIsAnnounced()
+    public async Task ASessionEndingOnItsOwnIsAnnounced_AfterTheCountStoppedIncludingIt()
    {
        // A shell with no output to give: its first read returns 0, which is a remote closing the channel,
        // so the pump finishes with nobody asking it to.
@@ -231,16 +286,18 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var ended = new List<uint>();
+        var liveAtAnnouncement = -1;
        workspace.SessionEnded += (_, e) =>
        {
            lock (ended)
            {
+                liveAtAnnouncement = workspace.LiveSessionCount;
                ended.Add(e.SessionId);
            }
        };

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await WaitUntilAsync(() =>
        {
@@ -249,31 +306,49 @@ public sealed class TerminalWorkspaceTests
                return ended.Contains(sessionId);
            }
        });
+
+        lock (ended)
+        {
+            liveAtAnnouncement.ShouldBe(0, "the announcement must wait for the run to actually complete");
+        }
    }

-    /// <inheritdoc cref="ASessionEndingOnItsOwnIsAnnounced" />
+    /// <remarks>
+    /// The reversal of a recorded decision, and the event's own remark carries why: a close used to be
+    /// announced to nobody, on the theory that the caller already knew — but the phone's keep-alive is not
+    /// the caller, and a close it never heard about left the foreground notification claiming a shell that
+    /// was gone. Announced once, after the drain, so the count a handler reads is already honest.
+    /// </remarks>
    [Fact]
-    public async Task ClosingASessionIsNotAnnouncedBack()
+    public async Task ClosingASessionIsAnnounced_OnceItHasDrained()
    {
        var connections = new FakeConnectionFactory();

        await using var workspace = CreateWorkspace(connections);

        var announcements = 0;
-        workspace.SessionEnded += (_, _) => Interlocked.Increment(ref announcements);
+        var liveAtAnnouncement = -1;
+        workspace.SessionEnded += (_, _) =>
+        {
+            liveAtAnnouncement = workspace.LiveSessionCount;
+            Interlocked.Increment(ref announcements);
+        };

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await workspace.CloseSessionAsync(sessionId);

        Volatile.Read(ref announcements)
-            .ShouldBe(0, "a close the caller asked for is not news to report back to it");
+            .ShouldBe(1, "a close is news to the keep-alive even though it is an echo to the closer");
+        liveAtAnnouncement.ShouldBe(0, "announced after the drain, so the count already excludes it");
    }

    /// <remarks>
    /// Disposal is the other path that closes sessions, because it is process shutdown. Asserted so
-    /// that the SSH connections are known to be released rather than assumed to be.
+    /// that the SSH connections are known to be released rather than assumed to be — and that these closes,
+    /// unlike a deliberate one, are announced to nobody: shutdown is dismantling every subscriber along
+    /// with the sessions, and news nobody is left to hear is not news.
    /// </remarks>
    [Fact]
    public async Task DisposingTheWorkspaceClosesEverySession()
@@ -282,16 +357,20 @@ public sealed class TerminalWorkspaceTests

        var workspace = CreateWorkspace(connections);

+        var announcements = 0;
+        workspace.SessionEnded += (_, _) => Interlocked.Increment(ref announcements);
+
        await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);
        await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await workspace.DisposeAsync();

        workspace.LiveSessionCount.ShouldBe(0);
        connections.Connections.Count.ShouldBe(2);
        connections.Connections.ShouldAllBe(connection => connection.IsDisposed);
+        Volatile.Read(ref announcements).ShouldBe(0, "shutdown closes are not announced");
    }

    // ---- Reattach ----
@@ -328,7 +407,7 @@ public sealed class TerminalWorkspaceTests
        using var first = await ConnectRendererAsync(workspace);

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        // The session's own opening frame, sent as soon as the pump starts running. Not a replay, and not
        // what this test is about — read and discarded so it cannot be confused for one below.
@@ -395,7 +474,7 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(connections);

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        // The up-arrow, as a PTY expects it. Three bytes, and all three matter.
        byte[] upArrow = [0x1B, (byte)'[', (byte)'A'];
@@ -417,7 +496,7 @@ public sealed class TerminalWorkspaceTests
        await using var workspace = CreateWorkspace(new FakeConnectionFactory());

        var sessionId = await workspace.OpenSessionAsync(
-            Request(), TerminalSize.Default, TestContext.Current.CancellationToken);
+            Request(), TerminalSize.Default, progress: null, TestContext.Current.CancellationToken);

        await workspace.CloseSessionAsync(sessionId);

@@ -459,10 +538,26 @@ public sealed class TerminalWorkspaceTests
        new("host.invalid", 22, "dodo", new SshPasswordCredential("irrelevant"));

    /// <remarks>
+    /// <para>
    /// Attaches the way the real page does: by fetching the served page, reading the token and socket URL
    /// back out of it, and presenting them on the upgrade — rather than reaching into the workspace for a
    /// token it does not expose. A shortcut here would prove only that a socket can be opened, not that the
    /// workspace serves a page a renderer could actually attach with.
+    /// </para>
+    /// <para>
+    /// And it waits for the attach rather than only for the handshake, for the reason
+    /// <c>TerminalDataPlaneTests.ConnectAsync</c> sets out at length: the 101 is written before the socket
+    /// is attachable, and a frame sent in between is dropped. A caller that opens a session on the socket
+    /// this returns and then reads its opening frame is exactly the shape that loses that race.
+    /// </para>
+    /// <para>
+    /// <c>WaitForRendererAsync</c> answers only for the first renderer ever to attach, so a second call
+    /// returns immediately without proving anything about the second socket. That is enough here and is
+    /// not luck: the only frames a second socket is given are the replay, and the replay is *caused* by the
+    /// attach — <see cref="TerminalWorkspace.RendererReattached"/> and the frames before it cannot be sent
+    /// early. The day a test sends something else down a reattached socket, this needs the data plane's own
+    /// <c>SocketAttached</c>, which the workspace does not forward today.
+    /// </para>
    /// </remarks>
    private static async Task<ClientWebSocket> ConnectRendererAsync(TerminalWorkspace workspace)
    {
@@ -482,6 +577,8 @@ public sealed class TerminalWorkspaceTests
        try
        {
            await client.ConnectAsync(new Uri(socketUrl), TestContext.Current.CancellationToken);
+
+            await workspace.WaitForRendererAsync(TestContext.Current.CancellationToken);
        }
        catch
        {